- Pharo-dev - lists.pharo.org

[Pharo 7.0-dev] Build #1297: Revert "22284-Freeze-during-startup"
by ci-pharo-ci-jenkins2＠inria.fr Oct. 4, 2018

Oct. 4, 2018

There is a new Pharo build available! The status of the build #1297 was: SUCCESS. The Pull Request #1696 was integrated: "Revert "22284-Freeze-during-startup"" Pull request url: https://github.com/pharo-project/pharo/pull/1696 Issue Url: https://pharo.fogbugz.com/f/cases/revert Build Url: https://ci.inria.fr/pharo-ci-jenkins2/job/Test%20pending%20pull%20request%2…

1 0

[Pharo 7.0-dev] Build #1296: 22526 Tag ManifestMorphicWidgetsPluggable and related classes
by ci-pharo-ci-jenkins2＠inria.fr Oct. 4, 2018

Oct. 4, 2018

There is a new Pharo build available! The status of the build #1296 was: SUCCESS. The Pull Request #1863 was integrated: "22526 Tag ManifestMorphicWidgetsPluggable and related classes" Pull request url: https://github.com/pharo-project/pharo/pull/1863 Issue Url: https://pharo.fogbugz.com/f/cases/22526 Build Url: https://ci.inria.fr/pharo-ci-jenkins2/job/Test%20pending%20pull%20request%2…

1 0

[Pharo 7.0-dev] Build #1295: 22525 Tag and comment ManifestReflectivity to have a proper Reflectivity package
by ci-pharo-ci-jenkins2＠inria.fr Oct. 4, 2018

Oct. 4, 2018

There is a new Pharo build available! The status of the build #1295 was: SUCCESS. The Pull Request #1862 was integrated: "22525 Tag and comment ManifestReflectivity to have a proper Reflectivity package" Pull request url: https://github.com/pharo-project/pharo/pull/1862 Issue Url: https://pharo.fogbugz.com/f/cases/22525 Build Url: https://ci.inria.fr/pharo-ci-jenkins2/job/Test%20pending%20pull%20request%2…

1 0

:: Separator in class names
by Torsten Bergmann Oct. 4, 2018

Oct. 4, 2018

Again several years passed by and we still have no solution for Namespaces. At least I would like to have support for a separator. Details are in this thread from 2016 (!): http://forum.world.st/Separator-in-class-names-td4926162.html I still ask if this is something we can get on board for P7 or P8? Thx T.

2 1

Re: [Pharo-dev] Slowness when loading code in Pharo 7?
by tinchodias＠gmail.com Oct. 3, 2018

Oct. 3, 2018

On Tue, 2018-10-02 at 23:31 -0300, Juraj Kubelka via Pharo-dev wrote: > I can profile it to see if there is something wrong, or it's just that a lot of source code from GT and dependencies is written to disk and then the only thing can do is disable change recording (and maybe then re-enabling it after load). (but I have linux)

1 0

Re: [Pharo-dev] Slowness when loading code in Pharo 7?
by Juraj Kubelka Oct. 3, 2018

Oct. 3, 2018

Hi! I did the same measurement for Pharo 6.1. To summarize it I have those results: By executing: -=-=-=- EpMonitor current disable. [ Metacello new baseline: 'GToolkit'; repository: 'github://feenkcom/gtoolkit/src'; load. ] timeToRun -=-=-=- Pharo 6.1 64bit macOS: 6 minutes Pharo 7.0 64bit macOS: 8 minutes With EpMonitor current enabled it is: Pharo 6.1 64bit macOS: 7 minutes Pharo 7.0 64bit macOS: 15 minutes Cheers, Juraj > On Oct 2, 2018, at 23:31, Juraj Kubelka via Pharo-dev <pharo-dev(a)lists.pharo.org> wrote: > > > From: Juraj Kubelka <juraj.kubelka(a)icloud.com> > Subject: Re: [Pharo-dev] Slowness when loading code in Pharo 7? > Date: October 2, 2018 at 23:31:59 GMT-3 > To: Pharo Development List <pharo-dev(a)lists.pharo.org> > > > Hi Martin, > > By disabling EpMonitor, the slowdown disappears. > > EpMonitor current disable. > [ Metacello new > baseline: 'GToolkit'; > repository: 'github://feenkcom/gtoolkit/src'; > load. > ] timeToRun "0:00:08:03.504â > > > Cheers, > Juraj > >> On Oct 2, 2018, at 18:14, Martin Dias <tinchodias(a)gmail.com> wrote: >> >> Hi Andrei. You can evaluate "EpMonitor current disable" before loading >> to compare times. >> El mar., 2 de oct. de 2018 a la(s) 11:18, Andrei Chis >> (chisvasileandrei(a)gmail.com) escribiÃ³: >>> >>> Hi, >>> >>> Are there any know slowdowns when loading code in Pharo 7? Usually on my machine (Mac - HighSierra) loading GToolkit in a Pharo 6.1 images takes around 9 minutes. In the latest Pharo 7 it takes 20 minutes. On two other newer laptops running Mac results are similar (15 minutes on Pharo 7 64it, and 7 minutes on Pharo 6.1 64bit). >>> >>> We have the impression that most of the times, the regression happens because of reading sources file. And the sources files are read because of checking Epicea method changes. We have not done a deep research on it, just whenever we do CMD+. it stops in that stage. >>> >>> Cheers, >>> Andrei >> > > > >

1 0

Loading GitHub/Tonel/BaselineOf code in Pharo 6.0
by Sven Van Caekenberghe Oct. 3, 2018

Oct. 3, 2018

So I am trying to load GitHub/Tonel/BaselineOf code in Pharo 6.0. I got a fresh 6.0 and I installed Tonel into it using Metacello new repository: 'github://pharo-vcs/tonel'; baseline: 'Tonel'; load. Which went OK Fetched -> BaselineOfTonel-cypress.1 --- github://pharo-vcs/tonel:master [0317649:master] --- github://pharo-vcs/tonel:master Loaded -> BaselineOfTonel-cypress.1 --- github://pharo-vcs/tonel:master [0317649:master] --- github://pharo-vcs/tonel:master Loading baseline of BaselineOfTonel... Fetched -> MonticelloTonel-Core-cypress.1 --- github://pharo-vcs/tonel:master [0317649:master] --- github://pharo-vcs/tonel:master Fetched -> MonticelloTonel-FileSystem-cypress.1 --- github://pharo-vcs/tonel:master [0317649:master] --- github://pharo-vcs/tonel:master Fetched -> MonticelloTonel-Tests-cypress.1 --- github://pharo-vcs/tonel:master [0317649:master] --- github://pharo-vcs/tonel:master Loaded -> MonticelloTonel-Core-cypress.1 --- github://pharo-vcs/tonel:master [0317649:master] --- cache Loaded -> MonticelloTonel-FileSystem-cypress.1 --- github://pharo-vcs/tonel:master [0317649:master] --- cache Loaded -> MonticelloTonel-Tests-cypress.1 --- github://pharo-vcs/tonel:master [0317649:master] --- cache ...finished baseline Then I try to load some code from me that has been converted to GitHub/Tonel/BaselineOf and that works fine in 6.1/7.0 and contains all meta info Metacello new repository: 'github://svenvc/ztimestamp'; baseline: 'ZTimestamp'; load. This fails ...RETRY->BaselineOfZTimestamp ...RETRY->BaselineOfZTimestamp ...FAILED->BaselineOfZTimestamp Could not resolve: BaselineOfZTimestamp [BaselineOfZTimestamp] in /Users/sven/Tmp/pharo6/pharo-local/package-cache github://svenvc/ztimestamp:master What am I doing wrong here ? Thx, Sven

3 6

[Pharo 7.0-dev] Build #1294: 22515 Package ManifestGraphicsDisplayObjects and related classes in Graphics-Display Objects
by ci-pharo-ci-jenkins2＠inria.fr Oct. 3, 2018

Oct. 3, 2018

There is a new Pharo build available! The status of the build #1294 was: FAILURE. The Pull Request #1855 was integrated: "22515 Package ManifestGraphicsDisplayObjects and related classes in Graphics-Display Objects" Pull request url: https://github.com/pharo-project/pharo/pull/1855 Issue Url: https://pharo.fogbugz.com/f/cases/22515 Build Url: https://ci.inria.fr/pharo-ci-jenkins2/job/Test%20pending%20pull%20request%2…

1 0

[Pharo 7.0-dev] Build #1293: 22163-Memory-Leak-GLMHintableActionButtonBrick
by ci-pharo-ci-jenkins2＠inria.fr Oct. 3, 2018

Oct. 3, 2018

There is a new Pharo build available! The status of the build #1293 was: SUCCESS. The Pull Request #1848 was integrated: "22163-Memory-Leak-GLMHintableActionButtonBrick" Pull request url: https://github.com/pharo-project/pharo/pull/1848 Issue Url: https://pharo.fogbugz.com/f/cases/22163 Build Url: https://ci.inria.fr/pharo-ci-jenkins2/job/Test%20pending%20pull%20request%2…

1 0

[Pharo 7.0-dev] Build #1292: 22094-Scrollbars-need-to-take-displayScaleFactor-into-account
by ci-pharo-ci-jenkins2＠inria.fr Oct. 3, 2018

Oct. 3, 2018

There is a new Pharo build available! The status of the build #1292 was: FAILURE. The Pull Request #1852 was integrated: "22094-Scrollbars-need-to-take-displayScaleFactor-into-account" Pull request url: https://github.com/pharo-project/pharo/pull/1852 Issue Url: https://pharo.fogbugz.com/f/cases/22094 Build Url: https://ci.inria.fr/pharo-ci-jenkins2/job/Test%20pending%20pull%20request%2…

1 0