- Pharo-dev - lists.pharo.org

[Pharo-project] converting RFC822 to unix timestamp
by sergio_101 Nov. 8, 2010

Nov. 8, 2010

was looking to see if there i was missing such a conversion.. it looks like i need to manually split it apart and build a DateTime. does this sound right? thanks! -- ---- peace, sergio photographer, journalist, visionary http://www.CodingForHire.com http://www.coffee-black.com http://www.painlessfrugality.com http://www.twitter.com/sergio_101 http://www.facebook.com/sergio101

1 0

Re: [Pharo-project] Writing API for XML (WAX) - Bibliography example
by StÃ©phane Ducasse Nov. 8, 2010

Nov. 8, 2010

Thanks hannes I think that the XMLWriter offers a bit something similar influenced by seaside DSL. Stef On Nov 1, 2010, at 10:58 PM, Hannes Hirzel wrote: > Hello > > I read the post by Stephane Ducasse about writing XML (see below) with > a bibliography example. > > Recently I (re)-discovered the port to Squeak/Pharo of the Writing API > for XML (WAX) (http://java.ociweb.com/mark/programming/WAX.html) and > could put it to good use for writing an XML file a bit more complex > than the bibliography example. > > From the web site > WAX has the following characteristics: > > * focuses on writing XML, not reading it > * requires less code than other approaches > * uses less memory than other approaches > (because it outputs XML as each method is called rather than > storing it in a DOM-like structure and outputting it later) > * writes all XML node types > * always outputs well-formed XML or throws an exception unless > running in "trust me" mode > * knows how to associate DTDs, XML Schemas and XSLT stylesheets > with the XML it outputs > * is well-suited for writing XML request and response messages for > REST-based and SOAP-based services > > However I do not know how far these points apply to the Squeak/Pharo port. > http://www.squeaksource.com/WAX > It needs the VB Regex package (http://www.squeaksource.com/Regex) > > As an exercise I did the code to produce the example Stephane gave. It > worked fine; see below. > > Regards > Hannes > > > > > > ========================================================== > > WAX new > stream: (FileStream newFileNamed: 'myBibliography.xml'); > writeXMLDeclaration: #1.0; > start: 'BDBase'; > attr: 'date' value: '25 May 2010'; > attr: 'note' value: 'nil'; > > start: 'bd'; > attr: 'authors' value: 'Larcenet'; > attr: 'editor' value: 'Dargaud'; > attr: 'entryCreationDate' value: '25 March 2006'; > attr: 'entryNumber' value: '1'; > attr: 'number' value: '1'; > attr: 'original' value: 'true'; > attr: 'serie' value: 'Nic oumouk'; > attr: 'serieComplete' value: 'false'; > attr: 'title' value: 'Total souk pour nic oumouk'; > attr: 'year' value: '2005'; > end; > > start: 'bd'; > attr: 'authors' value: 'Greg'; > attr: 'editor' value: 'Dargaud'; > attr: 'entryCreationDate' value: '5 May 2006'; > attr: 'entryNumber' value: '2'; > attr: 'notes' value: 'sur le 4eme de couv aventure a manhattan'; > attr: 'number' value: '9'; > attr: 'original' value: 'true'; > attr: 'serie' value: 'Achille Talon'; > attr: 'title' value: 'Les petits desseins d''Achille Talon'; > attr: 'year' value: '1974'; > end; > > start: 'bd'; > attr: 'authors' value: 'Greg'; > attr: 'editor' value: 'Dargaud'; > attr: 'entryCreationDate' value: '5 May 2006'; > attr: 'entryNumber' value: '3'; > attr: 'notes' value: 'sur la couverture une histoire du journal tintin'; > attr: 'number' value: '13'; > attr: 'original' value: 'true'; > attr: 'serie' value: 'Achille Talon'; > attr: 'title' value: 'Pas de pitiÃ© pour Achille Talon'; > attr: 'year' value: '1976'; > end; > end; > close. > > ========================================================== > Output > <?xml version="1.0" encoding="UTF-8"?> > <BDBase date="25 May 2010" note="nil"> > <bd authors="Larcenet" editor="Dargaud" entryCreationDate="25 March > 2006" entryNumber="1" number="1" original="true" serie="Nic oumouk" > serieComplete="false" title="Total souk pour nic oumouk" year="2005"/> > <bd authors="Greg" editor="Dargaud" entryCreationDate="5 May 2006" > entryNumber="2" notes="sur le 4eme de couv aventure a manhattan" > number="9" original="true" serie="Achille Talon" title="Les petits > desseins d'Achille Talon" year="1974"/> > <bd authors="Greg" editor="Dargaud" entryCreationDate="5 May 2006" > entryNumber="3" notes="sur la couverture une histoire du journal > tintin" number="13" original="true" serie="Achille Talon" title="Pas > de pitiÃ© pour Achille Talon" year="1976"/> > </BDBase> > > > > ========================================================== > > On 10/31/10, stephane ducasse <stephane.ducasse(a)free.fr> wrote: >> How can I control that each of the node of my document get printed a cr at >> its end? >> >> In the past I got that >> >> <?xml version="1.0" encoding="UTF-8" ?> >> <BDBase date="25 May 2010" entriesNumber="2440" note="nil"> >> <bd authors="Larcenet" editor="Dargaud" entryCreationDate="25 March 2006" >> entryNumber="1" number="1" original="true" serie="Nic oumouk" >> serieComplete="false" title="Total souk pour nic oumouk" year="2005"/> >> <bd authors="Greg" editor="Dargaud" entryCreationDate="5 May 2006" >> entryNumber="2" notes="sur le 4eme de couv aventure a manhattan" number="9" >> original="true" serie="Achille Talon" title="Les petits desseins d'Achille >> Talon" year="1974"/> >> <bd authors="Greg" editor="Dargaud" entryCreationDate="5 May 2006" >> entryNumber="3" notes="sur la couverture une histoire du journal tintin" >> number="13" original="true" serie="Achille Talon" title="Pas de pitiÃ© pour >> Achille Talon" year="1976"/> >> <bd aut >> >> Now I get >> >> <?xml version="1.0" encoding="UTF-8"?><Base date="31 October 2010" >> entriesNumber="2448" note="nil"><bd serieComplete="false" editor="Dargaud" >> entryCreationDate="25 March 2006" entryNumber="1" authors="Larcenet" >> title="Total souk pour nic oumouk" serie="Nic oumouk" original="true" >> number="1" year="2005" /><bd serieComplete="false" editor="Dargaud" >> entryCreationDate="5 May 2006" entryNumber="2" authors="Greg" title="Les >> petits desseins d'Achille Talon" serie="Achille Talon" original="true" >> notes="sur le 4eme de couv aventure a manhattan" number="9" year="1974" >> /><bd serieComplete="false" editor="Dargaud" entryCreationDate="5 May 2006" >> entryNumber="3" authors="Greg" title="Pas de pitiÃ© pour Achille Talon" >> serie="Achille Talon" original="true" notes="sur la couverture une histoire >> du journal tintin" number="13" year="1976" /><bd serieComplete="false" >> editor="Dargaud" entryCreationDate="5 May 2006" entryNumber="4" >> authors="Greg" title >> >> Thanks >> >> Stef >> >

3 5

[Pharo-project] Pharo Sprint @ Smalltalks'10
by Alexandre Bergel Nov. 8, 2010

Nov. 8, 2010

Hi! On Thursday 11 we will have a Pharo Sprint at Smalltalks'10. Please, enter your name on http://code.google.com/p/pharo/wiki/PharoSprints Cheers, Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.

2 1

[Pharo-project] smalltalk: breaking out of a loop..
by sergio_101 Nov. 7, 2010

Nov. 7, 2010

if i have an OrderedCollection called people.. if i have a million ordered pairs in there, and i wanna see af any one of them (hasTenBucks = true). i don't want to iterate all of them, i want to stop when i find that one hasTenBucks.. so in something like: people do: [ :person | (person hasTenBucks) ifTrue; [break out of loop] ] ideas? thanks! -- ---- peace, sergio photographer, journalist, visionary http://www.CodingForHire.com http://www.coffee-black.com http://www.painlessfrugality.com http://www.twitter.com/sergio_101 http://www.facebook.com/sergio101

4 4

Re: [Pharo-project] Date time iso8601 format
by StÃ©phane Ducasse Nov. 7, 2010

Nov. 7, 2010

On Nov 7, 2010, at 1:55 PM, laurent laffont wrote: > > On Sun, Nov 7, 2010 at 1:50 PM, laurent laffont <laurent.laffont(a)gmail.com> wrote: > The other way. For example > > DateAndTime now printISO8601 > > Laurent > > > It seems Chronos http://chronos-st.org/ has such formatters (ISO8601PrintPolicy) but AnsiStandardCalendarClock is missing in Pharo.... Why do you mean missing in pharo? When you load chronos this is not there. May be you should contact the author and ask. > > Laurent > > > > On Sun, Nov 7, 2010 at 1:28 PM, Johan Brichau <johan(a)inceptive.be> wrote: > Laurent, > > DateAndTime readFrom: '2008-02-10T12:00:00Z' readStream > > Does that yield what you want? > > cheers > Johan > > On 06 Nov 2010, at 15:07, laurent laffont wrote: > >> Hi, >> >> I cannot find which method to use to get a Date in iso 8601 format like '2008-02-10T12:00:00Z' ? >> >> >> Cheers, >> >> Laurent Laffont >> >> Pharo Smalltalk Screencasts: http://www.pharocasts.com/ >> Blog: http://magaloma.blogspot.com/ > > >

1 0

Re: [Pharo-project] SmalltalkImage
by StÃ©phane Ducasse Nov. 7, 2010

Nov. 7, 2010

SmalltalkImage current instVarAt: #globals put: SystemDictionary new Something like that. ? On Nov 7, 2010, at 2:46 AM, Benjamin wrote: > Hi guys, > > I wonder how SmalltalkImage create the Smalltalk instance. > > Can someone explain me that ? > > > > > Thank you > > Ben >

3 3

[Pharo-project] Fwd:Dr.geo en Arabe
by Hilaire Fernandes Nov. 7, 2010

Nov. 7, 2010

hanks Ahmed! A request. Is it possible to have Arab language under Pharo? Hilaire -------- Message original -------- Sujet: Dr.geo en Arabe Date : Sat, 06 Nov 2010 13:29:40 +0000 De : Ahmed Mansour <atphalix(a)inbox.com> Pour : Hilaire Fernandes <hilaire.fernandes(a)gmail.com> Bonjour Hilaire, Si joint la traduction de Dr.Geo II en Arabe, j'ai testÃ© uniquement sous Etoys vu qu'il a le support de Pango (indispensable pour le rendu de script complexe), est-t-il possible d'ajouter le support de Pango Ã Pharo dans une version prochaine? Cordialement, -- Ahmed Mansour http://olpc-maroc.blogspot.com http://twitter.com/OLPCMorocco ____________________________________________________________ Share photos & screenshots in seconds... TRY FREE IM TOOLPACK at http://www.imtoolpack.com/default.aspx?rc=if1 Works in all emails, instant messengers, blogs, forums and social networks.

3 3

[Pharo-project] squeaksource down
by Max Leske Nov. 7, 2010

Nov. 7, 2010

Squeaksource seems to be down again... Max

1 0

Nov. 7, 2010

Thanks juan. You conclusion is good and I'm happy that we made it that way. Stef > Hi Folks, > > All what Stef said wrt these issues is correct. I just want to (perhaps) make some detail clearer. > > Esug agreed to sponsor Morphic 3 about one year ago. At that time I expected to have a working and usable system by the end of this year. This is not going to happen. Main reasons are: > 1) I underestimated the effort. > 2) Inflation and other issues meant I needed to make more money that I was currently making. So I had to reduce the hours I devote to volunteer work to spend them in paid work. > 3) I failed to get sponsors for this project outside the Smalltalk community (although I did try). > 4) Some of the ideas in Morphic 3 are novel enough that I need to protect them from being patented by others from, before disclosing them. I don't like software patents, so I believe the best way to do this (and get more people to know these ideas) is to submit a paper to a journal such as ACM Transactions on Graphics. This will obviously require additional time. > So work on Morphic 3 is not stopped, but right now it is paused. > > It seemed to me that instead of just telling Esug "I'm sorry, but you'll get nothing by the date I promised results", I could do a more practical, down to earth contribution to the Smalltalk community in return for Esug's support. I believe that many in the Pharo community share my opinion that the current Morphic implementation is obfuscated, that it is too hard to write applications with it, and that it is too hard to fix bugs and evolve it. > > The Morphic implementation in Cuis is the main result of many (I guess about 6) years of part time work on simplifying the system. I think it could be of great value for Pharo, and an enabler for evolution. So, I did a request to Esug, to deliver this, naming it "SimpleMorphic", ready to run in Pharo, instead of Morphic 3. Esug approved it, and I thank them for this. SimpleMorphic is the result of this. I started by extracting the Morphic in Cuis. This was not trivial, as I had to think carefully where to draw the line between what I'd migrate to Pharo and what I'd use from Pharo. Then I adapted it to some differences between Cuis and Pharo, and also tweaked Pharo to enable using alternative UIs. I worked about 80 hours on this and delivered this week. > > After all this, I think it is fair to say that Esug sponsored Cuis as SimpleMorphic is part of it. I hope this helps and does not add confusion. > > Cheers, > Juan Vuletich >

1 0

Nov. 7, 2010

Pavel can you point our such initializations problems so that we fix them. Stef On Nov 6, 2010, at 11:19 PM, Pavel Krivanek wrote: > Hi Hilaire, > > I do not think that PharoCore image generated from PharoKernel will be > better for your needs. It is not significantly smaller, it has almost > the same code base and bugs are common because the original image did > a lot of forgotten ad hoc initializations. > > -- Pavel > > On Sat, Nov 6, 2010 at 7:44 PM, Hilaire Fernandes > <hilaire.fernandes(a)gmail.com> wrote: >> Pavel, I would like to be your first user. I am planing for a DrGeo >> release in the coming weeks, so I will definitely take a look. >> >> >> Hilaire >> >> Le 06/11/2010 12:47, Pavel Krivanek a Ã©crit : >>> This screenshot is more representative ;-) >>> >>> -- Pavel >>> >>> On Sat, Nov 6, 2010 at 12:12 PM, Pavel Krivanek >>> <pavel.krivanek(a)gmail.com> wrote: >>>> Hi all, >>>> >>>> I successfully loaded the the rest of PharoCore packages into the >>>> PharoKernel. The Morphic initialization works too. See the attached >>>> screenshot. I will publish the scripts later today. >>>> >>>> Cheers, >>>> -- Pavel >>>> >> >> >> -- >> Dr. Geo, to discover geometry on Linux, Windows, MAC and XO >> http://community.ofset.org/index.php/DrGeo >> >> >> >

1 0