October 2015 - Pharo-dev - lists.pharo.org

missing cairo library in CI
by Peter UhnÃ¡k Feb. 14, 2016

Feb. 14, 2016

Hi all, not sure if this is best directed at pharo or CI mailing list... I've created a new job in pharo-contribution and my Pharo project uses Cairo library... however when CI ran the tests it failed on "Cannot locate cairo library. Please check if it installed on your system" ( https://ci.inria.fr/pharo-contribution/job/DynaCASE/2/PHARO=40,VERSION=deve… ) is it something I need to enable or disable somewhere? I'm pretty sure Athens also uses Cairo ( https://ci.inria.fr/pharo-contribution/job/Athens/) and it works just fine. Any pointers appreciated, Peter

3 6

[Pharo-project] [ANN] Pomodoro for Pharo 2.0
by Torsten Bergmann Feb. 5, 2016

Feb. 5, 2016

Hi, I followed the recent discussion and initial code about "Pomodoro" and since (until now) I used a timer written in Java I thought it would be a good idea to replace it with a Smalltalk one ;) I grabbed the HOPomodoro code from Phil and since it was marked as "experiment" I thought it would be good to write a new clean implementation with tests for Pharo 2.0. Thanks Phil - hope you are not angry that I hijacked the idea ... Attached is a screenshot of the tool. Install ======= Go to the Config browser in Pharo 2.0 ("Tools" -> "Config Browser") and load "Pomodoro" from the "Verified" tab. A new timer should appear and you can just click on "Start" to run the timer. When it finished it turns red, beeps and informs the user. How to use ========== You can open a new pomodoro (defaults 25 minutes) from the world menu ("Tools" -> "Pomodoro"). Customize ========= You can customize the pomodoro using Smalltalk. Here are a few examples: "open a new 25 minute one" Pomodoro new open "Opens a new timer with one minute total time" Pomodoro timerFor: 1 minute "Provide an action when pomodoro is finished" Pomodoro timerFor: 5 seconds whenFinishedDo: [ self inform: 'Pomodoro finished'] Code ==== The project comes with 15 tests. Code lives on project "Pomodoro" on SmalltalkHub. So far I added Phil and Sean as contributors since they discussed this topic already and may provide new ideas. If one wants to contribute feel free to do so. Thanks T.

5 6

Launcher Mac CI -> Broken Executable
by Sean P. DeNigris Jan. 26, 2016

Jan. 26, 2016

"Pharo" is damaged and can't be opened. You should move it to the Trash. ----- Cheers, Sean -- View this message in context: http://forum.world.st/Launcher-Mac-CI-Broken-Executable-tp4820123.html Sent from the Pharo Smalltalk Developers mailing list archive at Nabble.com.

4 10

.filetree file?
by Alexandre Bergel Jan. 13, 2016

Jan. 13, 2016

Hi! When using Filetree, there is this file .filetree in the git folder. What should I do with it? add it to the repository or ignore it? cheers, Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.

4 4

Repeatable VM crash
by Hilaire Jan. 5, 2016

Jan. 5, 2016

When playing with equality in a class hierarchy I have repeatable VM crash. It is today Pharo VM 3.9-7 from Jenkins and Pharo3. Am I using an out of date VM? Crashdump enclosed Hilaire -- Dr. Geo - http://drgeo.eu iStoa - http://istoa.drgeo.eu

5 16

[ANN] Multiple Desktop support for Pharo 5
by Torsten Bergmann Dec. 21, 2015

Dec. 21, 2015

Julien Delplanque provided this week a goodie to switch between "desktops" - but his initial solution was more or less hiding windows and not really switching between real Pharo worlds/desktops. I gave him some tips what could be done on the pharo-user list. Havent heard from him afterwards. Now I was able to spend a few hours on this topic myself and implemented a full multiple desktop solution myself. This works in Pharo 5 only (currently) and requires latest VM (at least on Windows) from files.pharo.org to get the keyboard shortcuts right. To try: Gofer new smalltalkhubUser: 'TorstenBergmann' project: 'DesktopManager'; configuration; loadDevelopment. The goodie has some nice features like keyboard navigation, world menu integration and even a custom spotter with preview of the desktops. Quick start: =========== - evaluate the above expression in a Pharo 5 image - check the world menu "Desktop" - you can press CTRL + D and then CTRL + A (= Desktop Add) to add a new desktop - you can press CTRL + D and then CTRL + D (= Desktop Desktop) to open the overview - you can press CTRL + D and then CTRL + P (= Desktop Previous) to navigate to the previous desktop - you can press CTRL + D and then CTRL + N (= Desktop Next) to navigate to the next desktop The code is hopefully a good example on how to build a custom spotter, shortcuts, inspector extensions, ... Additionally all this is described in a new article including screenshots and a guide on how to use this new goodie: https://medium.com/@astares/multiple-desktops-for-pharo-5cbc46f3179f Actually the article took more time to write than coding but I hope it helps explaining Pharo and why it is a power tool. Project is on http://www.smalltalkhub.com/#!/~TorstenBergmann/DesktopManager Article and code is still subject to change. Have fun T.

4 6

[Pharo-project] Do we have the new primitive?? [WAS] Re: IdentitySet but using #hash rather than #identityHash ?
by Mariano Martinez Peck Dec. 16, 2015

Dec. 16, 2015

> All I can say is that I am impressed by the numbers it is really much >> faster. >> I still don't understand why I send this email with a subject say >> IdentitySet because what I really need is a fast/large IdentityDictionary >> :( Anyway, there's a place where we can use this LargeIdentitySet in Fuel >> I think). >> >> So Levente, you say this is not possible to adapt this for dictionary? >> can >> we contact Eliot to provide such a primitive? >> > > As promised, I uploaded my LargeIdentityDictionary implementation to > http://leves.web.elte.hu/**squeak/**LargeIdentityDictionary.st<http://leves.web.elte.hu/squeak/LargeIdentityDictionary.st>. > The numbers will be a bit worse compared to LargeIdentitySet, because of > the lack of the primitive, but it's still 2-3x faster than other solutions > (IdentityDictionary, PluggableIdentityDictionary, subclassing, etc). I'm > about to propose this primitive with other improvements on the vm-dev list. > > Hi Eliot/Levente. What is the status of this? Do we have already the new primitive? If true, how can we adapt LargeIdentitySet to use such new primitive? Thanks! > > Levente > > >> thanks >> >> On Fri, Dec 16, 2011 at 3:28 PM, Levente Uzonyi <leves(a)elte.hu> wrote: >> >> On Fri, 16 Dec 2011, Henrik Sperre Johansen wrote: >>> >>> On 16.12.2011 03:26, Levente Uzonyi wrote: >>> >>>> >>>> >>>>> How about my numbers? :) >>>>> >>>>> "Preallocate objects, so we won't count gc time." >>>>> n := 1000000. >>>>> objects := Array new: n streamContents: [ :stream | >>>>> n timesRepeat: [ stream nextPut: Object new ] ]. >>>>> >>>>> set := IdentitySet new: n. >>>>> Smalltalk garbageCollect. >>>>> [1 to: n do: [ :i | set add: (objects at: i) ] ] timeToRun. "4949" >>>>> >>>>> set := LargeIdentitySet new. >>>>> Smalltalk garbageCollect. >>>>> [1 to: n do: [ :i | set add: (objects at: i) ] ] timeToRun. "331" >>>>> >>>>> set := (PluggableSet new: n) >>>>> hashBlock: [ :object | object identityHash * 4096 + object class >>>>> identityHash * 64 ]; "Change this to #basicIdentityHash in Pharo" >>>>> equalBlock: [ :a :b | a == b ]; >>>>> yourself. >>>>> Smalltalk garbageCollect. >>>>> [1 to: n do: [ :i | set add: (objects at: i) ] ] timeToRun. "5511" >>>>> >>>>> >>>>> I also have a LargeIdentityDictionary, which is relatively fast, but >>>>> not >>>>> as fast as LargeIdentitySet, because (for some unknown reason) we don't >>>>> have a primitive that could support it. If we had a primitive like >>>>> primitive 132 which would return the index of the element if found or >>>>> 0 if >>>>> not, then we could have a really fast LargeIdentityDictionary. >>>>> >>>>> >>>>> Levente >>>>> >>>>> Hehe yes, if writing a version fully exploiting the limited range, >>>> that's >>>> probably the approach I would go for as well. >>>> (IAssuming it's the version at http://leves.web.elte.hu/** >>>> squeak/LargeIdentitySet.st<htt**p://leves.web.elte.hu/squeak/** >>>> LargeIdentitySet.st<http://leves.web.elte.hu/squeak/LargeIdentitySet.st> >>>> > >>>> ) >>>> >>>> Mariano commented in the version at http://www.squeaksource.com/** >>>> FuelExperiments <http://www.squeaksource.com/**FuelExperiments<http://www.squeaksource.com/FuelExperiments>> >>>> that it's >>>> >>>> slow for them, which I guess is due to not adopting #identityHash calls >>>> to >>>> #basicIdentityHash calls for Pharo: >>>> ((0 to: 4095) collect: [:each | each << 22 \\ 4096 ]) asSet size -> 1 >>>> So it basically uses 1 bucket instead of 4096... Whoops. :) >>>> >>>> Uploaded a new version to the MC repository which is adapted for Pharo, >>>> on the same machine my numbers were taken from, it does the same test >>>> as I >>>> used above in 871 ms. (181 with preallocation). >>>> >>>> >>> Cool. One more thing: in Squeak the method using primitive 132 directly >>> was renamed to #instVarsInclude:, so now #pointsTo: works as expected. If >>> this was also added to Pharo, then the #pointsTo: sends should be changed >>> to #instVarsInclude:, otherwise Array can be reported as included even if >>> it wasn't added. >>> I'll upload my LargeIdentityDictionary implementation to the same place >>> this evening, since it's still 2-3 factor faster than other solutionts >>> and >>> there seem to be demand for it. >>> >>> >>> Levente >>> >>> >>> Cheers, >>>> Henry >>>> >>>> >>>> >>>> >>> >> >> -- >> Mariano >> http://marianopeck.wordpress.**com <http://marianopeck.wordpress.com> >> >> > -- Mariano http://marianopeck.wordpress.com

3 5

GTools merging configurations
by Andrei Chis Dec. 1, 2015

Dec. 1, 2015

Hi, For the GTInspector, GTPlayground and GTSpotter we now have distinct configurations. However, this complicates the integration process with Pharo as a lot of configurations need to be updated. So we'd like to merge them in ConfigurationOfGToolkitCore. What do you think? This will simplify a lot the integration process. Cheers, Andrei

5 5

Metacello load script won't update the configuration
by Yuriy Tymchuk Nov. 24, 2015

Nov. 24, 2015

Hi, when you use a script like Metacello new smalltalkhubUser: 'Pharo' project: 'MetaRepoForPharo40'; configuration: 'QualityAssistant'; load and you already have the configuration package loaded, the script is not updating the configuration itself. As the result you cannot update to a newer version. Is there a special expression that has to be used to update the configuration package? If not, maybe it does make sense to update the configuration before loading it? Cheers! Uko

5 11

[Pharo-project] StandardFileStream size limit?
by GÃ¶ran Krampe Nov. 13, 2015

Nov. 13, 2015

Hey all! I have just added large file (chunkwise upload and download) support to Kom/Networking/Iliad in Pharo 1.4 and while testing it I tried uploading a 2.9Gb file. I haven't looked at the exact error message, and I haven't tried writing a trivial test - but the "half written" file on disk is almost EXACTLY 2Gb (2147483647) so I am wondering - do we still have a 2Gb file size limit? This is "one click 1.4" on Ubuntu 64 with ext4. regards, GÃ¶ran

7 10