- Pharo-users - lists.pharo.org

Re: [Pharo-users] Roassal Axes

by Alexandre Bergel

Sorry, here is the correct script: -=-=-=-=-=-=-=-=-= "This example shows how to control the center of the graph. Roassal assumes to have 0 @ 0, however you can subtract a value using #x: and #y:, and then add it in #labelConversion: to move the center of the graph" graphCenter := 5 @ 10. data := (-3.1415 to: 3.1415 by: 0.1) collect: [ :x | x @ (x sin * 3 + 10) ]. b := RTGrapher new. ds := RTData new. ds noDot; connectColor: Color blue. ds points: data. ds x: [ :p | p x - graphCenter x ]. ds y: [ :p | p y - graphCenter y ]. b add: ds. b axisX labelConversion: [ :v | (v + graphCenter x) asFloat round: 2 ]. b axisY labelConversion: [ :v | (v + graphCenter x) asFloat round: 2 ]. b. -=-=-=-=-=-=-=-=-= Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > On Dec 19, 2017, at 3:17 PM, Alexandre Bergel <alexandre.bergel(a)me.com> wrote: > > Another example: > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-= > "This example shows how to control the center of the graph. > Roassal assumes to have 0 @ 0, however you can subtract a value using #x: and #y:, and then add it in #labelConversion: to move the center of the graph" > graphCenter := 5 @ 10. > data := (-3.1415 to: 3.1415 by: 0.1) collect: [ :x | x @ (x sin * 3 + 10) ]. > b := RTGrapher new. > ds := RTData new. > ds noDot; connectColor: Roassal2.Color blue. > ds points: data. > ds x: [ :p | p x - graphCenter x ]. > ds y: [ :p | p y - graphCenter y ]. > b add: ds. > b axisX labelConversion: [ :v | (v + graphCenter x) asFloat ]. > b axisY labelConversion: [ :v | (v + graphCenter x) asFloat ]. > b. > -=-=-=-=-=-=-=-=-=-=-=-=-=-=-= > > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre Bergel http://www.bergel.eu <http://www.bergel.eu/> > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > >> On Dec 19, 2017, at 3:05 PM, Alexandre Bergel <alexandre.bergel(a)me.com <mailto:alexandre.bergel@me.com>> wrote: >> >> Hi Evan, >> >> Roassal assumes to have 0 @ 0. However, you do a manual translation that works very well. Check this: >> >> -=-=-=-=-=-=-=-=-=-=-=-=https://www.dropbox.com/s/oun1w85ypv1kbka/Screenshot%202017-12-19%2015.02.07.png?dl=0 <https://www.dropbox.com/s/oun1w85ypv1kbka/Screenshot%202017-12-19%2015.02.0…> >> data := #(1000 1001 1002). >> b := RTGrapher new. >> ds := RTData new. >> ds points: data. >> ds x: [ :c | c - 1000]. >> ds y: [ :c | c - 1000 ]. >> b add: ds. >> b axisX labelConversion: [ :v | (v + 1000) asFloat ]. >> b axisY labelConversion: [ :v | (v + 1000) asFloat ]. >> b. >> -=-=-=-=-=-=-=-=-=-=-=-= >> <Screenshot 2017-12-19 15.02.07.png> >> >> The idea is to subtract a value using #x: and #y:, and then add it in #labelConversion: >> >> Let us know how it goes >> >> -- >> _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: >> Alexandre Bergel http://www.bergel.eu <http://www.bergel.eu/> >> ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. >> >> >> >>> On Dec 19, 2017, at 12:44 PM, Evan Donahue <emdonahu(a)gmail.com <mailto:emdonahu@gmail.com>> wrote: >>> >>> Does anyone know how to change the min/max of the axes? I'm trying to figure out how to make x and y not start at 0. >>> >>> data := #(1000 1001 1002). >>> b := RTGrapher new. >>> ds := RTData new. >>> ds points: data. >>> ds x: [ :c | c ]. >>> ds y: [ :c | c ]. >>> b add: ds. >>> b minX: 999. >>> b maxX: 1003. >>> b minY: 999. >>> b maxY: 1003. >>> b. >>> >>> ^ this does not do what I was expecting. If the data is all clustered together but far from zero, I'd like to adjust the axes so I can see the actual variation in the data, and not just a single point where everything is clustered. What is the right way to do this? >>> >>> Thanks, >>> Evan >> >

Dec. 19, 2017

Re: [Pharo-users] Roassal Axes

by Alexandre Bergel

Another example: -=-=-=-=-=-=-=-=-=-=-=-=-=-=-= "This example shows how to control the center of the graph. Roassal assumes to have 0 @ 0, however you can subtract a value using #x: and #y:, and then add it in #labelConversion: to move the center of the graph" graphCenter := 5 @ 10. data := (-3.1415 to: 3.1415 by: 0.1) collect: [ :x | x @ (x sin * 3 + 10) ]. b := RTGrapher new. ds := RTData new. ds noDot; connectColor: Roassal2.Color blue. ds points: data. ds x: [ :p | p x - graphCenter x ]. ds y: [ :p | p y - graphCenter y ]. b add: ds. b axisX labelConversion: [ :v | (v + graphCenter x) asFloat ]. b axisY labelConversion: [ :v | (v + graphCenter x) asFloat ]. b. -=-=-=-=-=-=-=-=-=-=-=-=-=-=-= -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > On Dec 19, 2017, at 3:05 PM, Alexandre Bergel <alexandre.bergel(a)me.com> wrote: > > Hi Evan, > > Roassal assumes to have 0 @ 0. However, you do a manual translation that works very well. Check this: > > -=-=-=-=-=-=-=-=-=-=-=-=https://www.dropbox.com/s/oun1w85ypv1kbka/Screenshot%202017-12-19%2015.02.07.png?dl=0 <https://www.dropbox.com/s/oun1w85ypv1kbka/Screenshot%202017-12-19%2015.02.0…> > data := #(1000 1001 1002). > b := RTGrapher new. > ds := RTData new. > ds points: data. > ds x: [ :c | c - 1000]. > ds y: [ :c | c - 1000 ]. > b add: ds. > b axisX labelConversion: [ :v | (v + 1000) asFloat ]. > b axisY labelConversion: [ :v | (v + 1000) asFloat ]. > b. > -=-=-=-=-=-=-=-=-=-=-=-= > <Screenshot 2017-12-19 15.02.07.png> > > The idea is to subtract a value using #x: and #y:, and then add it in #labelConversion: > > Let us know how it goes > > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre Bergel http://www.bergel.eu <http://www.bergel.eu/> > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > >> On Dec 19, 2017, at 12:44 PM, Evan Donahue <emdonahu(a)gmail.com <mailto:emdonahu@gmail.com>> wrote: >> >> Does anyone know how to change the min/max of the axes? I'm trying to figure out how to make x and y not start at 0. >> >> data := #(1000 1001 1002). >> b := RTGrapher new. >> ds := RTData new. >> ds points: data. >> ds x: [ :c | c ]. >> ds y: [ :c | c ]. >> b add: ds. >> b minX: 999. >> b maxX: 1003. >> b minY: 999. >> b maxY: 1003. >> b. >> >> ^ this does not do what I was expecting. If the data is all clustered together but far from zero, I'd like to adjust the axes so I can see the actual variation in the data, and not just a single point where everything is clustered. What is the right way to do this? >> >> Thanks, >> Evan >

Dec. 19, 2017

Re: [Pharo-users] Roassal Axes

by Alexandre Bergel

Hi Evan, Roassal assumes to have 0 @ 0. However, you do a manual translation that works very well. Check this: -=-=-=-=-=-=-=-=-=-=-=-=https://www.dropbox.com/s/oun1w85ypv1kbka/Screenshot%202017-12-19%2015.02.07.png?dl=0 data := #(1000 1001 1002). b := RTGrapher new. ds := RTData new. ds points: data. ds x: [ :c | c - 1000]. ds y: [ :c | c - 1000 ]. b add: ds. b axisX labelConversion: [ :v | (v + 1000) asFloat ]. b axisY labelConversion: [ :v | (v + 1000) asFloat ]. b. -=-=-=-=-=-=-=-=-=-=-=-= The idea is to subtract a value using #x: and #y:, and then add it in #labelConversion: Let us know how it goes -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > On Dec 19, 2017, at 12:44 PM, Evan Donahue <emdonahu(a)gmail.com> wrote: > > Does anyone know how to change the min/max of the axes? I'm trying to figure out how to make x and y not start at 0. > > data := #(1000 1001 1002). > b := RTGrapher new. > ds := RTData new. > ds points: data. > ds x: [ :c | c ]. > ds y: [ :c | c ]. > b add: ds. > b minX: 999. > b maxX: 1003. > b minY: 999. > b maxY: 1003. > b. > > ^ this does not do what I was expecting. If the data is all clustered together but far from zero, I'd like to adjust the axes so I can see the actual variation in the data, and not just a single point where everything is clustered. What is the right way to do this? > > Thanks, > Evan

Dec. 19, 2017

Roassal Axes

by Evan Donahue

Does anyone know how to change the min/max of the axes? I'm trying to figure out how to make x and y not start at 0. data := #(1000 1001 1002). b := RTGrapher new. ds := RTData new. ds points: data. ds x: [ :c | c ]. ds y: [ :c | c ]. b add: ds. b minX: 999. b maxX: 1003. b minY: 999. b maxY: 1003. b. ^ this does not do what I was expecting. If the data is all clustered together but far from zero, I'd like to adjust the axes so I can see the actual variation in the data, and not just a single point where everything is clustered. What is the right way to do this? Thanks, Evan

Dec. 19, 2017

Re: [Pharo-users] How to select all changes in Epicea?

by HernÃ¡n Morales Durand

Hi Yann, I tried with your suggestion using ctrl+a and it selected all changes, although the selection background color is barely visible. It would be cool to have a menu item option. Thank you, HernÃ¡n 2017-12-19 7:55 GMT-03:00 Yann Lesage <yannlesag(a)gmail.com>: > > > Le 19/12/2017 Ã 08:06, HernÃ¡n Morales Durand a Ã©crit : >> >> Hi guys, >> >> My Pharo image crashed and I opened Epicea for the first time. I >> selected "Today" changes in the left pane and then after changes are >> displayed in the right pane, I expected a menu item, button or popup >> to select all code changes and then apply them. >> >> But I couldn't find the any option, even trying with holding key >> buttons and applying combination of clicks. What I am missing? > > > After apply filter on the lasts changes, I clic on one change, I use ctrl+a > to select all change and right clic >> "apply...". > I hope it's what you search to do. > > > >> >> Using Windows here. >> >> Cheers, >> >> HernÃ¡n > > > Yann Lesage >

Dec. 19, 2017

Re: [Pharo-users] Fuel serialize of 70MB takes forever on Linux vs. Mac

by Mariano Martinez Peck

On Tue, Dec 19, 2017 at 7:40 AM, Andreas Brodbeck <dassi(a)mindclue.ch> wrote: > Am 18.12.17 um 20:45 schrieb Henrik-Nergaard: > > Hi Andreas, > > > > It looks like you may have problems with hash collisions > > FLLargeIdentityDictionary. > > What are the tally sizes of the FLLargeIdentityDicitonary used when you > > serialize? (If these have a tally larger than ~ 75% of the available size > > (4096 items), then there may well be some performance loss). > > Well, hm, I have FLLargeIdentityDicitonary instances with up to 300'000 > items... But that's what "large" means, right? > > Is there anything I can do here? I don't think so. > > > > > You could check if file writing is the problem by measuring the time it > > takes to only serialize in memory. > > You can try to use: "FLSerializer serializeToByteArray: " and see if it > > gives petter performance? > > Thanks for this hint! I did that, and measured the same crazy > difference, 6minutes vs. 1.5 minutes. > > So: It's not the storage! It's something inside Fuel. I keep > investigating and will update here. > > Hi Andreas, Reading the thread nothing obvious comes to my mind. Sorry. My guy feeling is that some of the primitives used by FLLargeIdentityDicitonary become slower in latest VMs. I guess the main one to check is #fuelPointsTo: (primitive 132) (see the senders). Maybe you can do a quick test (isolated from your app) and compare agains old pharo ? Another thing would be comparing your scenario using a identity set. Just save your image before doing this: | set dict | set := FLLargeIdentitySet. dict := FLLargeIdentityDictionary. Smalltalk at: #FLLargeIdentitySet put: IdentitySet. Smalltalk at: #FLLargeIdentityDictionary put: IdentityDictionary. And re-run the serialization. Anyway, cannot think of much more things now. Cheers,

Dec. 19, 2017

Re: [Pharo-users] How to select all changes in Epicea?

by Yann Lesage

Le 19/12/2017 Ã 08:06, HernÃ¡n Morales Durand a Ã©critÂ : > Hi guys, > > My Pharo image crashed and I opened Epicea for the first time. I > selected "Today" changes in the left pane and then after changes are > displayed in the right pane, I expected a menu item, button or popup > to select all code changes and then apply them. > > But I couldn't find the any option, even trying with holding key > buttons and applying combination of clicks. What I am missing? After apply filter on the lasts changes, I clic on one change, I use ctrl+a to select all change and right clic >> "apply...". I hope it's what you search to do. > > Using Windows here. > > Cheers, > > HernÃ¡n Yann Lesage

Dec. 19, 2017

Re: [Pharo-users] [ANN] Pharo TechTalk Dec 19: Contributing to Pharo7

by Marcus Denker

Hi, Due to complete pre-holiday stress we sadly have to postpone this. > On 1 Dec 2017, at 09:18, Marcus Denker <marcus.denker(a)inria.fr> wrote: > > Pharo TechTalk December 19: > > - 19 Dec 2017 5:00 PM - 7:00 PM (UTC+01:00) > - Where? Discord / Youtube live > > Topic: Contributing. How to report bugs, submit code change. > > This will be a hands-on session where we show how to > > â¢ report bugs > â¢ create pull requests > â¢ help reviewing issues and pull requests > > > https://association.pharo.org/event-2642666

Dec. 19, 2017

Re: [Pharo-users] Fuel serialize of 70MB takes forever on Linux vs. Mac

by Andreas Brodbeck

Am 18.12.17 um 20:45 schrieb Henrik-Nergaard: > Hi Andreas, > > It looks like you may have problems with hash collisions > FLLargeIdentityDictionary. > What are the tally sizes of the FLLargeIdentityDicitonary used when you > serialize? (If these have a tally larger than ~ 75% of the available size > (4096 items), then there may well be some performance loss). Well, hm, I have FLLargeIdentityDicitonary instances with up to 300'000 items... But that's what "large" means, right? Is there anything I can do here? I don't think so. > > You could check if file writing is the problem by measuring the time it > takes to only serialize in memory. > You can try to use: "FLSerializer serializeToByteArray: " and see if it > gives petter performance? Thanks for this hint! I did that, and measured the same crazy difference, 6minutes vs. 1.5 minutes. So: It's not the storage! It's something inside Fuel. I keep investigating and will update here. Cheers, Andreas -- Andreas Brodbeck www.mindclue.ch

Dec. 19, 2017

How to select all changes in Epicea?

by HernÃ¡n Morales Durand

Hi guys, My Pharo image crashed and I opened Epicea for the first time. I selected "Today" changes in the left pane and then after changes are displayed in the right pane, I expected a menu item, button or popup to select all code changes and then apply them. But I couldn't find the any option, even trying with holding key buttons and applying combination of clicks. What I am missing? Using Windows here. Cheers, HernÃ¡n

Dec. 19, 2017