November 2016 - Pharo-users

Re: [Pharo-users] [SmaCC] Partial Installation

by Thierry Goubier

Hi Doru, 2016-11-25 14:14 GMT+01:00 Tudor Girba <tudor(a)tudorgirba.com>: > Hi Thierry, > > As you might have seen, John has created a repo with his version of SmaCC. > Would you be interested in merging possible differences from your code with > the repository from John? > Yes; John told me about it in August, and I merged around September / October. Both SmaCC repositories have exactly the same runtime; if you are not writing a parser, there is no reason to choose one or the other. They differ in the development part, and some/most of the differences are a matter of style. But, yes, it is possible to merge. Both are open, and the github SmaCC repository could also count as a test-case for Iceberg :) Regards, Thierry > > Cheers, > Doru > > > > On Nov 25, 2016, at 1:30 PM, Thierry Goubier <thierry.goubier(a)gmail.com> > wrote: > > > > Hi Kilon, > > > > 2016-11-25 12:13 GMT+01:00 Dimitris Chloupis <kilon.alios(a)gmail.com>: > > Hey there , I would like to install from SmaCC only Python and C++ > parsers , any idea how to add that to my baseline as a dependency ? > > > > Just load the SmaCC-Python package. There is no C++ parser. > > > > Use the following: > > > > spec > > baseline: 'SmaCC' > > with: [ spec repository: 'github://ThierryGoubier/SmaCC' > ]; > > import: 'SmaCC'. > > spec package: <yourPackage> with: [ spec requires: #('SmaCC-Python') ] > > > > Regards, > > > > Thierry > > > > > > > > --- > > ÎÏÏÏ ÏÎ¿ e-mail ÎµÎ»ÎÎ³ÏÎ¸Î·ÎºÎµ Î³Î¹Î± Î¹Î¿ÏÏ Î±ÏÏ ÏÎ¿ ÏÏÏÎ³ÏÎ±Î¼Î¼Î± Avast antivirus. > > https://www.avast.com/antivirus > > > > > > > > -- > www.tudorgirba.com > www.feenk.com > > "Speaking louder won't make the point worthier." > > >

Nov. 25, 2016

Re: [Pharo-users] [SmaCC] Partial Installation

by Dimitris Chloupis

I am afraid it does not work , I updated as you described my baseline https://github.com/kilon/Ephestos/blob/master/BaselineOfEphestos.package/Ba… and it gives me Error: Name not found: SmaCC-Python On Fri, Nov 25, 2016 at 2:31 PM Thierry Goubier <thierry.goubier(a)gmail.com> wrote: > Hi Kilon, > > 2016-11-25 12:13 GMT+01:00 Dimitris Chloupis <kilon.alios(a)gmail.com>: > > Hey there , I would like to install from SmaCC only Python and C++ parsers > , any idea how to add that to my baseline as a dependency ? > > > Just load the SmaCC-Python package. There is no C++ parser. > > Use the following: > > spec > baseline: 'SmaCC' > with: [ spec repository: > 'github://ThierryGoubier/SmaCC' ]; > import: 'SmaCC'. > spec package: <yourPackage> with: [ spec requires: #('SmaCC-Python') ] > > Regards, > > Thierry > > > > > --- > ÎÏÏÏ ÏÎ¿ e-mail ÎµÎ»ÎÎ³ÏÎ¸Î·ÎºÎµ Î³Î¹Î± Î¹Î¿ÏÏ Î±ÏÏ ÏÎ¿ ÏÏÏÎ³ÏÎ±Î¼Î¼Î± Avast antivirus. > https://www.avast.com/antivirus > > > >

Nov. 25, 2016

Re: [Pharo-users] [SmaCC] Partial Installation

by Tudor Girba

Hi Thierry, As you might have seen, John has created a repo with his version of SmaCC. Would you be interested in merging possible differences from your code with the repository from John? Cheers, Doru > On Nov 25, 2016, at 1:30 PM, Thierry Goubier <thierry.goubier(a)gmail.com> wrote: > > Hi Kilon, > > 2016-11-25 12:13 GMT+01:00 Dimitris Chloupis <kilon.alios(a)gmail.com>: > Hey there , I would like to install from SmaCC only Python and C++ parsers , any idea how to add that to my baseline as a dependency ? > > Just load the SmaCC-Python package. There is no C++ parser. > > Use the following: > > spec > baseline: 'SmaCC' > with: [ spec repository: 'github://ThierryGoubier/SmaCC' ]; > import: 'SmaCC'. > spec package: <yourPackage> with: [ spec requires: #('SmaCC-Python') ] > > Regards, > > Thierry > > > > --- > ÎÏÏÏ ÏÎ¿ e-mail ÎµÎ»ÎÎ³ÏÎ¸Î·ÎºÎµ Î³Î¹Î± Î¹Î¿ÏÏ Î±ÏÏ ÏÎ¿ ÏÏÏÎ³ÏÎ±Î¼Î¼Î± Avast antivirus. > https://www.avast.com/antivirus > > > -- www.tudorgirba.com www.feenk.com "Speaking louder won't make the point worthier."

Nov. 25, 2016

Re: [Pharo-users] [SmaCC] Partial Installation

by Thierry Goubier

Hi Kilon, 2016-11-25 12:13 GMT+01:00 Dimitris Chloupis <kilon.alios(a)gmail.com>: > Hey there , I would like to install from SmaCC only Python and C++ parsers > , any idea how to add that to my baseline as a dependency ? > Just load the SmaCC-Python package. There is no C++ parser. Use the following: spec baseline: 'SmaCC' with: [ spec repository: 'github://ThierryGoubier/SmaCC' ]; import: 'SmaCC'. spec package: <yourPackage> with: [ spec requires: #('SmaCC-Python') ] Regards, Thierry > > > --- > ÎÏÏÏ ÏÎ¿ e-mail ÎµÎ»ÎÎ³ÏÎ¸Î·ÎºÎµ Î³Î¹Î± Î¹Î¿ÏÏ Î±ÏÏ ÏÎ¿ ÏÏÏÎ³ÏÎ±Î¼Î¼Î± Avast antivirus. > https://www.avast.com/antivirus > > >

Nov. 25, 2016

[SmaCC] Partial Installation

by Dimitris Chloupis

Hey there , I would like to install from SmaCC only Python and C++ parsers , any idea how to add that to my baseline as a dependency ? --- ÎÏÏÏ ÏÎ¿ e-mail ÎµÎ»ÎÎ³ÏÎ¸Î·ÎºÎµ Î³Î¹Î± Î¹Î¿ÏÏ Î±ÏÏ ÏÎ¿ ÏÏÏÎ³ÏÎ±Î¼Î¼Î± Avast antivirus. https://www.avast.com/antivirus

Nov. 25, 2016

Re: [Pharo-users] [ANN] Animation package

by Thibault Raffaillac

Great! Tell me when you have any feedback (good or bad indeed). Thibault > Hello, > > Cool, I'll give a try to add animations to my windows switcher (Mirage [1]). > > Julien > > Links: > [1]: https://github.com/juliendelplanque/Mirage

Nov. 24, 2016

Re: [Pharo-users] [ANN] Animation package

by phil＠highoctane.be

Hey, nice. I need to have look inside the code to also get the evil laugh thing. Let's get moving. Phil On Wed, Nov 23, 2016 at 11:49 AM, Thibault Raffaillac < thibault.raffaillac(a)inria.fr> wrote: > Hello, > > I am happy to release the Animation package at last! > http://smalltalkhub.com/#!/~ThibaultRaffaillac/Animation > This is a general animation system, which can turn any setter message into > a smooth transition (provided the target value supports + and *Float). > > Examples: > AnimationProperty new at: morph set: #position: to: 100@100 during: 2 > seconds easing: #backOut. > AnimationProperty new at: morph set: #color: to: Color red during: 2 > seconds easing: #linear. > AnimationProperty new at: morph set: #title: to: 'tutututu' during: 2 > seconds easing: #linear. > > Or equivalently (don't choke): > morph position: (100@100 during: 2 seconds easing: #backOut). > morph color: (Color red during: 2 seconds). > morph title: ('tutututu' during: 2 seconds). > > It basically sends the setter message repeatedly during the target delay, > each time with a slightly different value. It should also work with Bloc, > although the update mechanism depends on Morphic's deferredUIMessage at the > moment. > > Cheers, > Thibault > > ps: Thanks to anonymous contributor for the second syntax, it was a lot of > fun - and evil laughs :) > > >

Nov. 23, 2016

Re: [Pharo-users] [ANN] Animation package

by Stephane Ducasse

Thibault did you try to extend roassal with them? You should post if to the Moose mailing-list. I produced a Pharo weekly news with your announce. On Wed, Nov 23, 2016 at 1:13 PM, Julien Delplanque <julien(a)tamere.eu> wrote: > Hello, > > Cool, I'll give a try to add animations to my windows switcher (Mirage > [1]). > > Julien > > Links: > [1]: https://github.com/juliendelplanque/Mirage > > > On 23/11/16 11:49, Thibault Raffaillac wrote: > >> Hello, >> >> I am happy to release the Animation package at last! >> http://smalltalkhub.com/#!/~ThibaultRaffaillac/Animation >> This is a general animation system, which can turn any setter message >> into a smooth transition (provided the target value supports + and *Float). >> >> Examples: >> AnimationProperty new at: morph set: #position: to: 100@100 during: 2 >> seconds easing: #backOut. >> AnimationProperty new at: morph set: #color: to: Color red during: 2 >> seconds easing: #linear. >> AnimationProperty new at: morph set: #title: to: 'tutututu' during: 2 >> seconds easing: #linear. >> >> Or equivalently (don't choke): >> morph position: (100@100 during: 2 seconds easing: #backOut). >> morph color: (Color red during: 2 seconds). >> morph title: ('tutututu' during: 2 seconds). >> >> It basically sends the setter message repeatedly during the target delay, >> each time with a slightly different value. It should also work with Bloc, >> although the update mechanism depends on Morphic's deferredUIMessage at the >> moment. >> >> Cheers, >> Thibault >> >> ps: Thanks to anonymous contributor for the second syntax, it was a lot >> of fun - and evil laughs :) >> >> > >

Nov. 23, 2016

Re: [Pharo-users] [ANN] Animation package

by Julien Delplanque

Hello, Cool, I'll give a try to add animations to my windows switcher (Mirage [1]). Julien Links: [1]: https://github.com/juliendelplanque/Mirage On 23/11/16 11:49, Thibault Raffaillac wrote: > Hello, > > I am happy to release the Animation package at last! http://smalltalkhub.com/#!/~ThibaultRaffaillac/Animation > This is a general animation system, which can turn any setter message into a smooth transition (provided the target value supports + and *Float). > > Examples: > AnimationProperty new at: morph set: #position: to: 100@100 during: 2 seconds easing: #backOut. > AnimationProperty new at: morph set: #color: to: Color red during: 2 seconds easing: #linear. > AnimationProperty new at: morph set: #title: to: 'tutututu' during: 2 seconds easing: #linear. > > Or equivalently (don't choke): > morph position: (100@100 during: 2 seconds easing: #backOut). > morph color: (Color red during: 2 seconds). > morph title: ('tutututu' during: 2 seconds). > > It basically sends the setter message repeatedly during the target delay, each time with a slightly different value. It should also work with Bloc, although the update mechanism depends on Morphic's deferredUIMessage at the moment. > > Cheers, > Thibault > > ps: Thanks to anonymous contributor for the second syntax, it was a lot of fun - and evil laughs :) >

Nov. 23, 2016

[ANN] Animation package

by Thibault Raffaillac

Hello, I am happy to release the Animation package at last! http://smalltalkhub.com/#!/~ThibaultRaffaillac/Animation This is a general animation system, which can turn any setter message into a smooth transition (provided the target value supports + and *Float). Examples: AnimationProperty new at: morph set: #position: to: 100@100 during: 2 seconds easing: #backOut. AnimationProperty new at: morph set: #color: to: Color red during: 2 seconds easing: #linear. AnimationProperty new at: morph set: #title: to: 'tutututu' during: 2 seconds easing: #linear. Or equivalently (don't choke): morph position: (100@100 during: 2 seconds easing: #backOut). morph color: (Color red during: 2 seconds). morph title: ('tutututu' during: 2 seconds). It basically sends the setter message repeatedly during the target delay, each time with a slightly different value. It should also work with Bloc, although the update mechanism depends on Morphic's deferredUIMessage at the moment. Cheers, Thibault ps: Thanks to anonymous contributor for the second syntax, it was a lot of fun - and evil laughs :)

Nov. 23, 2016