November 2015 - Pharo-users

Re: [Pharo-users] EPUB anyone

by Dimitris Chloupis

there are plenty of converters out there for coverting hmtl/pdf files to epub, why you need a pharo solution ? On Fri, Nov 13, 2015 at 7:45 PM Torsten Bergmann <astares(a)gmx.de> wrote: > Hi > > Is there anyone working on/with EPUB in Pharo? > > If I remember correctly there was once the idea of an > EPUB exporter for Pillar. > > Status/Plans? > > Thanks for an update > > Bye > T. > >

Nov. 13, 2015

Re: [Pharo-users] EPUB anyone

by Damien Cassou

Torsten Bergmann <astares(a)gmx.de> writes: > Is there anyone working on/with EPUB in Pharo? > > If I remember correctly there was once the idea of an > EPUB exporter for Pillar. > > Status/Plans? I don't know of anything on this front. But that's still a feature we would like. -- Damien Cassou http://damiencassou.seasidehosting.st "Success is the ability to go from one failure to another without losing enthusiasm." --Winston Churchill

Nov. 13, 2015

EPUB anyone

by Torsten Bergmann

Hi Is there anyone working on/with EPUB in Pharo? If I remember correctly there was once the idea of an EPUB exporter for Pillar. Status/Plans? Thanks for an update Bye T.

Nov. 13, 2015

Re: [Pharo-users] Transcrip Show: in a loop

by abdelghani ALIDRA

Yes, the benchmark object is a nice idea. I just did not know about it Thanks to all Â Abdelghani. DeÂ : Sven Van Caekenberghe <sven(a)stfx.eu> ÃÂ : Any question about pharo is welcome <pharo-users(a)lists.pharo.org> CcÂ : abdelghani ALIDRA <alidrandco(a)yahoo.fr> EnvoyÃ© le : Vendredi 13 novembre 2015 14h32 ObjetÂ : Re: [Pharo-users] Transcrip Show: in a loop > On 13 Nov 2015, at 14:25, Alexandre Bergel <alexandre.bergel(a)me.com> wrote: > > Hi! > > I understand your concern. However, there are better way of doing the benchmarking. Just inspect the following expression: > (1 to: 10) collect: [:i | [ aLongComputation ] timeToRun ] > > You can then easily graph the number, do some averageâ¦ Or even [ 1234 factorial ] benchFor: 2 seconds which gives you a nice BenchmarkResult object back > Alexandre > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre BergelÂ http://www.bergel.eu > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > >> On Nov 13, 2015, at 7:06 AM, abdelghani ALIDRA <alidrandco(a)yahoo.fr> wrote: >> >> Thanks Vincent, >> >>Â flush does not seem to work but I think I am going to use bench. >> >> Abdelghani >> >> De : Blondeau Vincent <vincent.blondeau(a)worldline.com> >> Ã : abdelghani ALIDRA <alidrandco(a)yahoo.fr>; Any question about pharo is welcome <pharo-users(a)lists.pharo.org> >> EnvoyÃ© le : Vendredi 13 novembre 2015 10h37 >> Objet : RE: [Pharo-users] Transcrip Show: in a loop >> >> Hi, >>Â >> For benchmarking, you should do : >> [ aLongComputation] bench >>Â >> It is simpler that to write on Transcript the execution time. >>Â >> About the writing of the messages on Transcript, that is a normal behavior. >> Maybe you should try âTranscript flushâ to force the message writing? >>Â >> Vincent >>Â >> De : Pharo-users [mailto:pharo-users-bounces@lists.pharo.org] De la part de abdelghani ALIDRA >> EnvoyÃ© : vendredi 13 novembre 2015 10:21 >> Ã : pharo-users(a)lists.pharo.org >> Objet : [Pharo-users] Transcrip Show: in a loop >>Â >> >> >> Hi all, >>Â >> In order to monitor my program performance, I am using Transcrip>>show as follows ; >>Â >> 10 timesRepeat:[ >>Â Â aLongComputation. >>Â Â Transcript show: 'some message'. >>Â Â ] >>Â >> The thing is that the messages are not shown one after another but all together after the loop is finished, unless I put a ... self halt >> Is this behavior normal? is there any way to make the messages come one by one? >>Â >> Thanks >>Â >> Abdelghani >> >> >> Ce message et les piÃ¨ces jointes sont confidentiels et rÃ©servÃ©s Ã l'usage exclusif de ses destinataires. Il peut Ã©galement Ãªtre protÃ©gÃ© par le secret professionnel. Si vous recevez ce message par erreur, merci d'en avertir immÃ©diatement l'expÃ©diteur et de le dÃ©truire. L'intÃ©gritÃ© du message ne pouvant Ãªtre assurÃ©e sur Internet, la responsabilitÃ© de Worldline ne pourra Ãªtre recherchÃ©e quant au contenu de ce message. Bien que les meilleurs efforts soient faits pour maintenir cette transmission exempte de tout virus, l'expÃ©diteur ne donne aucune garantie Ã cet Ã©gard et sa responsabilitÃ© ne saurait Ãªtre recherchÃ©e pour tout dommage rÃ©sultant d'un virus transmis. >> >> This e-mail and the documents attached are confidential and intended solely for the addressee; it may also be privileged. If you receive this e-mail in error, please notify the sender immediately and destroy it. As its integrity cannot be secured on the Internet, the Worldline liability cannot be triggered for the message content. Although the sender endeavours to maintain a computer virus-free network, the sender does not warrant that this transmission is virus-free and will not be liable for any damages resulting from any virus transmitted. >

Nov. 13, 2015

Re: [Pharo-users] Transcrip Show: in a loop

by Sven Van Caekenberghe

> On 13 Nov 2015, at 14:25, Alexandre Bergel <alexandre.bergel(a)me.com> wrote: > > Hi! > > I understand your concern. However, there are better way of doing the benchmarking. Just inspect the following expression: > (1 to: 10) collect: [:i | [ aLongComputation ] timeToRun ] > > You can then easily graph the number, do some averageâ¦ Or even [ 1234 factorial ] benchFor: 2 seconds which gives you a nice BenchmarkResult object back > Alexandre > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre Bergel http://www.bergel.eu > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > >> On Nov 13, 2015, at 7:06 AM, abdelghani ALIDRA <alidrandco(a)yahoo.fr> wrote: >> >> Thanks Vincent, >> >> flush does not seem to work but I think I am going to use bench. >> >> Abdelghani >> >> De : Blondeau Vincent <vincent.blondeau(a)worldline.com> >> Ã : abdelghani ALIDRA <alidrandco(a)yahoo.fr>; Any question about pharo is welcome <pharo-users(a)lists.pharo.org> >> EnvoyÃ© le : Vendredi 13 novembre 2015 10h37 >> Objet : RE: [Pharo-users] Transcrip Show: in a loop >> >> Hi, >> >> For benchmarking, you should do : >> [ aLongComputation] bench >> >> It is simpler that to write on Transcript the execution time. >> >> About the writing of the messages on Transcript, that is a normal behavior. >> Maybe you should try âTranscript flushâ to force the message writing? >> >> Vincent >> >> De : Pharo-users [mailto:pharo-users-bounces@lists.pharo.org] De la part de abdelghani ALIDRA >> EnvoyÃ© : vendredi 13 novembre 2015 10:21 >> Ã : pharo-users(a)lists.pharo.org >> Objet : [Pharo-users] Transcrip Show: in a loop >> >> >> >> Hi all, >> >> In order to monitor my program performance, I am using Transcrip>>show as follows ; >> >> 10 timesRepeat:[ >> aLongComputation. >> Transcript show: 'some message'. >> ] >> >> The thing is that the messages are not shown one after another but all together after the loop is finished, unless I put a ... self halt >> Is this behavior normal? is there any way to make the messages come one by one? >> >> Thanks >> >> Abdelghani >> >> >> Ce message et les piÃ¨ces jointes sont confidentiels et rÃ©servÃ©s Ã l'usage exclusif de ses destinataires. Il peut Ã©galement Ãªtre protÃ©gÃ© par le secret professionnel. Si vous recevez ce message par erreur, merci d'en avertir immÃ©diatement l'expÃ©diteur et de le dÃ©truire. L'intÃ©gritÃ© du message ne pouvant Ãªtre assurÃ©e sur Internet, la responsabilitÃ© de Worldline ne pourra Ãªtre recherchÃ©e quant au contenu de ce message. Bien que les meilleurs efforts soient faits pour maintenir cette transmission exempte de tout virus, l'expÃ©diteur ne donne aucune garantie Ã cet Ã©gard et sa responsabilitÃ© ne saurait Ãªtre recherchÃ©e pour tout dommage rÃ©sultant d'un virus transmis. >> >> This e-mail and the documents attached are confidential and intended solely for the addressee; it may also be privileged. If you receive this e-mail in error, please notify the sender immediately and destroy it. As its integrity cannot be secured on the Internet, the Worldline liability cannot be triggered for the message content. Although the sender endeavours to maintain a computer virus-free network, the sender does not warrant that this transmission is virus-free and will not be liable for any damages resulting from any virus transmitted. >

Nov. 13, 2015

Re: [Pharo-users] Transcrip Show: in a loop

by Marcus Denker

For the transcript issue, we have a bug entry: https://pharo.fogbugz.com/f/cases/15515/Transcript-does-not-show-immediate-… > On 13 Nov 2015, at 10:25, Alexandre Bergel <alexandre.bergel(a)me.com> wrote: > > Hi! > > I understand your concern. However, there are better way of doing the benchmarking. Just inspect the following expression: > (1 to: 10) collect: [:i | [ aLongComputation ] timeToRun ] > > You can then easily graph the number, do some averageâ¦ > > Alexandre > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre Bergel http://www.bergel.eu <http://www.bergel.eu/> > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > >> On Nov 13, 2015, at 7:06 AM, abdelghani ALIDRA <alidrandco(a)yahoo.fr <mailto:alidrandco@yahoo.fr>> wrote: >> >> Thanks Vincent, >> >> flush does not seem to work but I think I am going to use bench. >> >> Abdelghani >> >> De : Blondeau Vincent <vincent.blondeau(a)worldline.com <mailto:vincent.blondeau@worldline.com>> >> Ã : abdelghani ALIDRA <alidrandco(a)yahoo.fr <mailto:alidrandco@yahoo.fr>>; Any question about pharo is welcome <pharo-users(a)lists.pharo.org <mailto:pharo-users@lists.pharo.org>> >> EnvoyÃ© le : Vendredi 13 novembre 2015 10h37 >> Objet : RE: [Pharo-users] Transcrip Show: in a loop >> >> Hi, >> >> For benchmarking, you should do : >> [ aLongComputation] bench >> >> It is simpler that to write on Transcript the execution time. >> >> About the writing of the messages on Transcript, that is a normal behavior. >> Maybe you should try âTranscript flushâ to force the message writing? >> >> Vincent >> >> De : Pharo-users [mailto:pharo-users-bounces@lists.pharo.org <mailto:pharo-users-bounces@lists.pharo.org>] De la part de abdelghani ALIDRA >> EnvoyÃ© : vendredi 13 novembre 2015 10:21 >> Ã : pharo-users(a)lists.pharo.org <mailto:pharo-users@lists.pharo.org> >> Objet : [Pharo-users] Transcrip Show: in a loop >> >> >> >> Hi all, >> >> In order to monitor my program performance, I am using Transcrip>>show as follows ; >> >> 10 timesRepeat:[ >> aLongComputation. >> Transcript show: 'some message'. >> ] >> >> The thing is that the messages are not shown one after another but all together after the loop is finished, unless I put a ... self halt >> Is this behavior normal? is there any way to make the messages come one by one? >> >> Thanks >> >> Abdelghani >> >> >> Ce message et les piÃ¨ces jointes sont confidentiels et rÃ©servÃ©s Ã l'usage exclusif de ses destinataires. Il peut Ã©galement Ãªtre protÃ©gÃ© par le secret professionnel. Si vous recevez ce message par erreur, merci d'en avertir immÃ©diatement l'expÃ©diteur et de le dÃ©truire. L'intÃ©gritÃ© du message ne pouvant Ãªtre assurÃ©e sur Internet, la responsabilitÃ© de Worldline ne pourra Ãªtre recherchÃ©e quant au contenu de ce message. Bien que les meilleurs efforts soient faits pour maintenir cette transmission exempte de tout virus, l'expÃ©diteur ne donne aucune garantie Ã cet Ã©gard et sa responsabilitÃ© ne saurait Ãªtre recherchÃ©e pour tout dommage rÃ©sultant d'un virus transmis. >> >> This e-mail and the documents attached are confidential and intended solely for the addressee; it may also be privileged. If you receive this e-mail in error, please notify the sender immediately and destroy it. As its integrity cannot be secured on the Internet, the Worldline liability cannot be triggered for the message content. Although the sender endeavours to maintain a computer virus-free network, the sender does not warrant that this transmission is virus-free and will not be liable for any damages resulting from any virus transmitted. >

Nov. 13, 2015

Re: [Pharo-users] Transcrip Show: in a loop

by Alexandre Bergel

Hi! I understand your concern. However, there are better way of doing the benchmarking. Just inspect the following expression: (1 to: 10) collect: [:i | [ aLongComputation ] timeToRun ] You can then easily graph the number, do some averageâ¦ Alexandre -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > On Nov 13, 2015, at 7:06 AM, abdelghani ALIDRA <alidrandco(a)yahoo.fr> wrote: > > Thanks Vincent, > > flush does not seem to work but I think I am going to use bench. > > Abdelghani > > De : Blondeau Vincent <vincent.blondeau(a)worldline.com> > Ã : abdelghani ALIDRA <alidrandco(a)yahoo.fr>; Any question about pharo is welcome <pharo-users(a)lists.pharo.org> > EnvoyÃ© le : Vendredi 13 novembre 2015 10h37 > Objet : RE: [Pharo-users] Transcrip Show: in a loop > > Hi, > > For benchmarking, you should do : > [ aLongComputation] bench > > It is simpler that to write on Transcript the execution time. > > About the writing of the messages on Transcript, that is a normal behavior. > Maybe you should try âTranscript flushâ to force the message writing? > > Vincent > > De : Pharo-users [mailto:pharo-users-bounces@lists.pharo.org] De la part de abdelghani ALIDRA > EnvoyÃ© : vendredi 13 novembre 2015 10:21 > Ã : pharo-users(a)lists.pharo.org > Objet : [Pharo-users] Transcrip Show: in a loop > > > > Hi all, > > In order to monitor my program performance, I am using Transcrip>>show as follows ; > > 10 timesRepeat:[ > aLongComputation. > Transcript show: 'some message'. > ] > > The thing is that the messages are not shown one after another but all together after the loop is finished, unless I put a ... self halt > Is this behavior normal? is there any way to make the messages come one by one? > > Thanks > > Abdelghani > > > Ce message et les piÃ¨ces jointes sont confidentiels et rÃ©servÃ©s Ã l'usage exclusif de ses destinataires. Il peut Ã©galement Ãªtre protÃ©gÃ© par le secret professionnel. Si vous recevez ce message par erreur, merci d'en avertir immÃ©diatement l'expÃ©diteur et de le dÃ©truire. L'intÃ©gritÃ© du message ne pouvant Ãªtre assurÃ©e sur Internet, la responsabilitÃ© de Worldline ne pourra Ãªtre recherchÃ©e quant au contenu de ce message. Bien que les meilleurs efforts soient faits pour maintenir cette transmission exempte de tout virus, l'expÃ©diteur ne donne aucune garantie Ã cet Ã©gard et sa responsabilitÃ© ne saurait Ãªtre recherchÃ©e pour tout dommage rÃ©sultant d'un virus transmis. > > This e-mail and the documents attached are confidential and intended solely for the addressee; it may also be privileged. If you receive this e-mail in error, please notify the sender immediately and destroy it. As its integrity cannot be secured on the Internet, the Worldline liability cannot be triggered for the message content. Although the sender endeavours to maintain a computer virus-free network, the sender does not warrant that this transmission is virus-free and will not be liable for any damages resulting from any virus transmitted.

Nov. 13, 2015

Re: [Pharo-users] FileDialog from Spec

by Jeff Gray

Thanks! That worked like a charm. -- View this message in context: http://forum.world.st/FileDialog-from-Spec-tp4860608p4860831.html Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

Nov. 13, 2015

Re: [Pharo-users] Transcrip Show: in a loop

by Carlo

Hi You could fork a thread which will free up the UI thread. e.g. [ 10 timesRepeat: [ aLongComputation. Transcript show: 'some message' ] ] fork Regards Carlo On 13 Nov 2015, at 12:06 PM, abdelghani ALIDRA <alidrandco(a)yahoo.fr> wrote: Thanks Vincent, flush does not seem to work but I think I am going to use bench. Abdelghani De : Blondeau Vincent <vincent.blondeau(a)worldline.com> Ã : abdelghani ALIDRA <alidrandco(a)yahoo.fr>; Any question about pharo is welcome <pharo-users(a)lists.pharo.org> EnvoyÃ© le : Vendredi 13 novembre 2015 10h37 Objet : RE: [Pharo-users] Transcrip Show: in a loop Hi, For benchmarking, you should do : [ aLongComputation] bench It is simpler that to write on Transcript the execution time. About the writing of the messages on Transcript, that is a normal behavior. Maybe you should try âTranscript flushâ to force the message writing? Vincent De : Pharo-users [mailto:pharo-users-bounces@lists.pharo.org] De la part de abdelghani ALIDRA EnvoyÃ© : vendredi 13 novembre 2015 10:21 Ã : pharo-users(a)lists.pharo.org Objet : [Pharo-users] Transcrip Show: in a loop Hi all, In order to monitor my program performance, I am using Transcrip>>show as follows ; 10 timesRepeat:[ aLongComputation. Transcript show: 'some message'. ] The thing is that the messages are not shown one after another but all together after the loop is finished, unless I put a ... self halt Is this behavior normal? is there any way to make the messages come one by one? Thanks Abdelghani Ce message et les piÃ¨ces jointes sont confidentiels et rÃ©servÃ©s Ã l'usage exclusif de ses destinataires. Il peut Ã©galement Ãªtre protÃ©gÃ© par le secret professionnel. Si vous recevez ce message par erreur, merci d'en avertir immÃ©diatement l'expÃ©diteur et de le dÃ©truire. L'intÃ©gritÃ© du message ne pouvant Ãªtre assurÃ©e sur Internet, la responsabilitÃ© de Worldline ne pourra Ãªtre recherchÃ©e quant au contenu de ce message. Bien que les meilleurs efforts soient faits pour maintenir cette transmission exempte de tout virus, l'expÃ©diteur ne donne aucune garantie Ã cet Ã©gard et sa responsabilitÃ© ne saurait Ãªtre recherchÃ©e pour tout dommage rÃ©sultant d'un virus transmis. This e-mail and the documents attached are confidential and intended solely for the addressee; it may also be privileged. If you receive this e-mail in error, please notify the sender immediately and destroy it. As its integrity cannot be secured on the Internet, the Worldline liability cannot be triggered for the message content. Although the sender endeavours to maintain a computer virus-free network, the sender does not warrant that this transmission is virus-free and will not be liable for any damages resulting from any virus transmitted.

Nov. 13, 2015

Re: [Pharo-users] Transcrip Show: in a loop

by abdelghani ALIDRA

Thanks Vincent, Â flush does not seem to work but I think I am going to use bench. Abdelghani DeÂ : Blondeau Vincent <vincent.blondeau(a)worldline.com> ÃÂ : abdelghani ALIDRA <alidrandco(a)yahoo.fr>; Any question about pharo is welcome <pharo-users(a)lists.pharo.org> EnvoyÃ© le : Vendredi 13 novembre 2015 10h37 ObjetÂ : RE: [Pharo-users] Transcrip Show: in a loop #yiv8061250181 #yiv8061250181 -- _filtered #yiv8061250181 {font-family:Helvetica;panose-1:2 11 6 4 2 2 2 2 2 4;} _filtered #yiv8061250181 {font-family:Helvetica;panose-1:2 11 6 4 2 2 2 2 2 4;} _filtered #yiv8061250181 {font-family:Calibri;panose-1:2 15 5 2 2 2 4 3 2 4;} _filtered #yiv8061250181 {font-family:Tahoma;panose-1:2 11 6 4 3 5 4 4 2 4;}#yiv8061250181 #yiv8061250181 p.yiv8061250181MsoNormal, #yiv8061250181 li.yiv8061250181MsoNormal, #yiv8061250181 div.yiv8061250181MsoNormal {margin:0cm;margin-bottom:.0001pt;font-size:12.0pt;}#yiv8061250181 a:link, #yiv8061250181 span.yiv8061250181MsoHyperlink {color:blue;text-decoration:underline;}#yiv8061250181 a:visited, #yiv8061250181 span.yiv8061250181MsoHyperlinkFollowed {color:purple;text-decoration:underline;}#yiv8061250181 span.yiv8061250181EmailStyle17 {color:#1F497D;}#yiv8061250181 .yiv8061250181MsoChpDefault {font-size:10.0pt;} _filtered #yiv8061250181 {margin:70.85pt 70.85pt 70.85pt 70.85pt;}#yiv8061250181 div.yiv8061250181WordSection1 {}#yiv8061250181 Hi, Â For benchmarking, you should doÂ : [ aLongComputation] bench Â It is simpler that to write on Transcript the execution time. Â About the writing of the messages on Transcript, that is a normal behavior. Maybe you should try âTranscript flushâ to force the message writing? Â Vincent Â DeÂ : Pharo-users [mailto:pharo-users-bounces@lists.pharo.org]De la part de abdelghani ALIDRA EnvoyÃ©Â : vendredi 13 novembre 2015 10:21 ÃÂ : pharo-users(a)lists.pharo.org ObjetÂ : [Pharo-users] Transcrip Show: in a loop Â Hi all, Â In order to monitor my program performance, I am using Transcrip>>show as follows ; Â 10 timesRepeat:[ Â Â aLongComputation. Â Â Transcript show: 'some message'. Â Â ] Â The thing is that the messages are not shown one after another but all together after the loop is finished, unless I put a ... self halt Is this behavior normal? is there any way to make the messages come one by one? Â Thanks Â Abdelghani Ce message et les piÃ¨ces jointes sont confidentiels et rÃ©servÃ©s Ã l'usage exclusif de ses destinataires. Il peut Ã©galement Ãªtre protÃ©gÃ© par le secret professionnel. Si vous recevez ce message par erreur, merci d'en avertir immÃ©diatement l'expÃ©diteur et de le dÃ©truire. L'intÃ©gritÃ© du message ne pouvant Ãªtre assurÃ©e sur Internet, la responsabilitÃ© de Worldline ne pourra Ãªtre recherchÃ©e quant au contenu de ce message. Bien que les meilleurs efforts soient faits pour maintenir cette transmission exempte de tout virus, l'expÃ©diteur ne donne aucune garantie Ã cet Ã©gard et sa responsabilitÃ© ne saurait Ãªtre recherchÃ©e pour tout dommage rÃ©sultant d'un virus transmis. This e-mail and the documents attached are confidential and intended solely for the addressee; it may also be privileged. If you receive this e-mail in error, please notify the sender immediately and destroy it. As its integrity cannot be secured on the Internet, the Worldline liability cannot be triggered for the message content. Although the sender endeavours to maintain a computer virus-free network, the sender does not warrant that this transmission is virus-free and will not be liable for any damages resulting from any virus transmitted.

Nov. 13, 2015