December 2013 - Pharo-users

Re: [Pharo-users] Seaside on Pharo 3.0

by phil＠highoctane.be

Just load the configuration of Seaside3 in a Windows Pharo2.0: 1: get http://files.pharo.org/platform/Pharo2.0-win.zip 2: click on Pharo.exe 3: go to the configuration manager[image: Inline image 1] 4: Select the Seaside 3 configuration. Click on Install. [image: Inline image 2] 5. Wait while it loads. Takes a couple of minutes on an i7 and a decent network link. [image: Inline image 3] 6. Open a Workspace and start a ZincServerAdaptor on the port you like (here 8081): [image: Inline image 4] 7: Access Seaside from your browser: [image: Inline image 5] You are now up and running. Head now to http://book.seaside.st for the next steps. Enjoy, Phil On Tue, Dec 3, 2013 at 5:49 PM, sminni <sm(a)planage.com> wrote: > What do I need to do for a Windows Environment pls > > > > ----- > --- > Regards, Sanjay > -- > View this message in context: > http://forum.world.st/Seaside-on-Pharo-3-0-tp4726765p4727102.html > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > > >

Dec. 3, 2013

Re: [Pharo-users] Seaside on Pharo 3.0

by sminni

What do I need to do for a Windows Environment pls ----- --- Regards, Sanjay -- View this message in context: http://forum.world.st/Seaside-on-Pharo-3-0-tp4726765p4727102.html Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

Dec. 3, 2013

Re: [Pharo-users] command line command from pharo image

by Sean P. DeNigris

Sabine KnÃ¶fel wrote > OSProcess thisOSProcess You can remove the send of #thisOSProcess and it will still work. Also, if you don't care about output, you can use NB without installing anything. In Pharo 3.0, it works on Windows, will work on Mac with Igor's latest changes... not sure about Linux... HTH ----- Cheers, Sean -- View this message in context: http://forum.world.st/command-line-command-from-pharo-image-tp4727022p47270… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

Dec. 3, 2013

Re: [Pharo-users] command line command from pharo image

by Sabine KnÃ¶fel

Hi Esteban, yes, like this: OSProcess thisOSProcess command: ('{1}mongodump --out {2}' format: { RKAConfiguration databaseUtilsPath. (RKAConfiguration databaseBackupPath )}). Cheers Sabine On Tue, Dec 3, 2013 at 4:28 PM, EstebanLM [via Smalltalk] < ml-node+s1294792n4727066h41(a)n4.nabble.com> wrote: > ah :) > > then you need OSProcess. > > and I do not remember exactly how it was, but something like this: > > OSProcess command: 'mycommand with parameters'. > > cheers, > Esteban > > > On Tue, Dec 3, 2013 at 3:29 PM, Yuriy Tymchuk <[hidden email]<http://user/SendEmail.jtp?type=node&node=4727066&i=0> > > wrote: > >> >> On 03 Dec 2013, at 15:26, Sabine KnÃ¶fel <[hidden email]<http://user/SendEmail.jtp?type=node&node=4727066&i=1>> >> wrote: >> >> Hi, >> >> the mailinglist is so helpful! Its really great! >> >> >> But itâs not well indexable and does not provide quality information >> about data. Thatâs why I encourage people to use Stack Overflow >> >> >> CommandShell is my solution. >> >> Thanks! >> Sabine >> >> >> >> >> On Tue, Dec 3, 2013 at 3:00 PM, Sergi Reyner [via Smalltalk] <[hidden >> email]> wrote: >> >>> 2013/12/3 Sabine KnÃ¶fel <[hidden email]<http://user/SendEmail.jtp?type=node&node=4727033&i=0> >>> > >>> >>> Hi, >>>> >>>> how can I perform a commandline command from within Pharo? >>>> >>> >>> Check OSProcess and CommandShell. >>> >>> Cheers, >>> Sergi >>> >>> >>> >>> ------------------------------ >>> If you reply to this email, your message will be added to the >>> discussion below: >>> >>> http://forum.world.st/command-line-command-from-pharo-image-tp4727022p47270… >>> To start a new topic under Pharo Smalltalk Users, email [hidden email] >>> To unsubscribe from command line command from pharo image, click here. >>> NAML<http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instan…> >>> >> >> >> ------------------------------ >> View this message in context: Re: command line command from pharo image<http://forum.world.st/command-line-command-from-pharo-image-tp4727022p47270…> >> Sent from the Pharo Smalltalk Users mailing list archive<http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html>at >> Nabble.com. >> >> >> > > > ------------------------------ > If you reply to this email, your message will be added to the discussion > below: > > http://forum.world.st/command-line-command-from-pharo-image-tp4727022p47270… > To start a new topic under Pharo Smalltalk Users, email > ml-node+s1294792n1310670h65(a)n4.nabble.com > To unsubscribe from command line command from pharo image, click here<http://forum.world.st/template/NamlServlet.jtp?macro=unsubscribe_by_code&no…> > . > NAML<http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instan…> > -- View this message in context: http://forum.world.st/command-line-command-from-pharo-image-tp4727022p47270… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

Dec. 3, 2013

Re: [Pharo-users] command line command from pharo image

by Esteban Lorenzano

ah :) then you need OSProcess. and I do not remember exactly how it was, but something like this: OSProcess command: 'mycommand with parameters'. cheers, Esteban On Tue, Dec 3, 2013 at 3:29 PM, Yuriy Tymchuk <yuriy.tymchuk(a)me.com> wrote: > > On 03 Dec 2013, at 15:26, Sabine KnÃ¶fel <sabine.knoefel(a)gmail.com> wrote: > > Hi, > > the mailinglist is so helpful! Its really great! > > > But itâs not well indexable and does not provide quality information about > data. Thatâs why I encourage people to use Stack Overflow > > > CommandShell is my solution. > > Thanks! > Sabine > > > > > On Tue, Dec 3, 2013 at 3:00 PM, Sergi Reyner [via Smalltalk] <[hidden > email]> wrote: > >> 2013/12/3 Sabine KnÃ¶fel <[hidden email]<http://user/SendEmail.jtp?type=node&node=4727033&i=0> >> > >> >> Hi, >>> >>> how can I perform a commandline command from within Pharo? >>> >> >> Check OSProcess and CommandShell. >> >> Cheers, >> Sergi >> >> >> >> ------------------------------ >> If you reply to this email, your message will be added to the >> discussion below: >> >> http://forum.world.st/command-line-command-from-pharo-image-tp4727022p47270… >> To start a new topic under Pharo Smalltalk Users, email [hidden email] >> To unsubscribe from command line command from pharo image, click here. >> NAML<http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instan…> >> > > > ------------------------------ > View this message in context: Re: command line command from pharo image<http://forum.world.st/command-line-command-from-pharo-image-tp4727022p47270…> > Sent from the Pharo Smalltalk Users mailing list archive<http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html>at > Nabble.com. > > >

Dec. 3, 2013

Re: [Pharo-users] command line command from pharo image

by Yuriy Tymchuk

On 03 Dec 2013, at 15:26, Sabine KnÃ¶fel <sabine.knoefel(a)gmail.com> wrote: > Hi, > > the mailinglist is so helpful! Its really great! But itâs not well indexable and does not provide quality information about data. Thatâs why I encourage people to use Stack Overflow > > CommandShell is my solution. > > Thanks! > Sabine > > > > > On Tue, Dec 3, 2013 at 3:00 PM, Sergi Reyner [via Smalltalk] <[hidden email]> wrote: > 2013/12/3 Sabine KnÃ¶fel <[hidden email]> > > Hi, > > how can I perform a commandline command from within Pharo? > > Check OSProcess and CommandShell. > > Cheers, > Sergi > > > > If you reply to this email, your message will be added to the discussion below: > http://forum.world.st/command-line-command-from-pharo-image-tp4727022p47270… > To start a new topic under Pharo Smalltalk Users, email [hidden email] > To unsubscribe from command line command from pharo image, click here. > NAML > > > View this message in context: Re: command line command from pharo image > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

Dec. 3, 2013

Re: [Pharo-users] command line command from pharo image

by Sabine KnÃ¶fel

Hi, the mailinglist is so helpful! Its really great! CommandShell is my solution. Thanks! Sabine On Tue, Dec 3, 2013 at 3:00 PM, Sergi Reyner [via Smalltalk] < ml-node+s1294792n4727033h18(a)n4.nabble.com> wrote: > 2013/12/3 Sabine KnÃ¶fel <[hidden email]<http://user/SendEmail.jtp?type=node&node=4727033&i=0> > > > > Hi, >> >> how can I perform a commandline command from within Pharo? >> > > Check OSProcess and CommandShell. > > Cheers, > Sergi > > > > ------------------------------ > If you reply to this email, your message will be added to the discussion > below: > > http://forum.world.st/command-line-command-from-pharo-image-tp4727022p47270… > To start a new topic under Pharo Smalltalk Users, email > ml-node+s1294792n1310670h65(a)n4.nabble.com > To unsubscribe from command line command from pharo image, click here<http://forum.world.st/template/NamlServlet.jtp?macro=unsubscribe_by_code&no…> > . > NAML<http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instan…> > -- View this message in context: http://forum.world.st/command-line-command-from-pharo-image-tp4727022p47270… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

Dec. 3, 2013

Re: [Pharo-users] command line command from pharo image

by Sergi Reyner

2013/12/3 Sabine KnÃ¶fel <sabine.knoefel(a)gmail.com> > Hi, > > how can I perform a commandline command from within Pharo? > Check OSProcess and CommandShell. Cheers, Sergi

Dec. 3, 2013

Re: [Pharo-users] command line command from pharo image

by Ryan Bell

In that case, wouldn't you find the corrent CommandLineHandler class and call >>activate on it? /Ryan On Tue, Dec 3, 2013 at 8:51 AM, Yuriy Tymchuk <yuriy.tymchuk(a)me.com> wrote: > I think the question was how do you do that worm *within* Pharo. Not > Pharo from command line > > Uko > > > On 03 Dec 2013, at 14:48, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: > > depends on the kind of command line :) > > the most easy way is to do something like: > > ./pharo Pharo.image eval "42 factorial" > > Esteban > > > On Tue, Dec 3, 2013 at 2:45 PM, Sabine KnÃ¶fel <sabine.knoefel(a)gmail.com>wrote: > >> Hi, >> >> how can I perform a commandline command from within Pharo? >> >> Sabine >> >> >> >> -- >> View this message in context: >> http://forum.world.st/command-line-command-from-pharo-image-tp4727022.html >> Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. >> >> > >

Dec. 3, 2013

Re: [Pharo-users] command line command from pharo image

by Sabine KnÃ¶fel

Hi, Uko2 is right, I want to call an os command (esteban: mongodump) from within Pharo. Sabine On Tue, Dec 3, 2013 at 2:52 PM, Uko2 [via Smalltalk] < ml-node+s1294792n4727029h94(a)n4.nabble.com> wrote: > I think the question was how do you do that worm *within* Pharo. Not > Pharo from command line > > Uko > > > On 03 Dec 2013, at 14:48, Esteban Lorenzano <[hidden email]<http://user/SendEmail.jtp?type=node&node=4727029&i=0>> > wrote: > > depends on the kind of command line :) > > the most easy way is to do something like: > > ./pharo Pharo.image eval "42 factorial" > > Esteban > > > On Tue, Dec 3, 2013 at 2:45 PM, Sabine KnÃ¶fel <[hidden email]<http://user/SendEmail.jtp?type=node&node=4727029&i=1> > > wrote: > >> Hi, >> >> how can I perform a commandline command from within Pharo? >> >> Sabine >> >> >> >> -- >> View this message in context: >> http://forum.world.st/command-line-command-from-pharo-image-tp4727022.html >> Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. >> >> > > > > ------------------------------ > If you reply to this email, your message will be added to the discussion > below: > > http://forum.world.st/command-line-command-from-pharo-image-tp4727022p47270… > To start a new topic under Pharo Smalltalk Users, email > ml-node+s1294792n1310670h65(a)n4.nabble.com > To unsubscribe from command line command from pharo image, click here<http://forum.world.st/template/NamlServlet.jtp?macro=unsubscribe_by_code&no…> > . > NAML<http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instan…> > -- View this message in context: http://forum.world.st/command-line-command-from-pharo-image-tp4727022p47270… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

Dec. 3, 2013

Re: [Pharo-users] command line command from pharo image

by Yuriy Tymchuk

I think the question was how do you do that worm within Pharo. Not Pharo from command line Uko On 03 Dec 2013, at 14:48, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: > depends on the kind of command line :) > > the most easy way is to do something like: > > ./pharo Pharo.image eval "42 factorial" > > Esteban > > > On Tue, Dec 3, 2013 at 2:45 PM, Sabine KnÃ¶fel <sabine.knoefel(a)gmail.com> wrote: > Hi, > > how can I perform a commandline command from within Pharo? > > Sabine > > > > -- > View this message in context: http://forum.world.st/command-line-command-from-pharo-image-tp4727022.html > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > >

Dec. 3, 2013

Re: [Pharo-users] command line command from pharo image

by Esteban Lorenzano

depends on the kind of command line :) the most easy way is to do something like: ./pharo Pharo.image eval "42 factorial" Esteban On Tue, Dec 3, 2013 at 2:45 PM, Sabine KnÃ¶fel <sabine.knoefel(a)gmail.com>wrote: > Hi, > > how can I perform a commandline command from within Pharo? > > Sabine > > > > -- > View this message in context: > http://forum.world.st/command-line-command-from-pharo-image-tp4727022.html > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > >

Dec. 3, 2013

command line command from pharo image

by Sabine KnÃ¶fel

Hi, how can I perform a commandline command from within Pharo? Sabine -- View this message in context: http://forum.world.st/command-line-command-from-pharo-image-tp4727022.html Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

Dec. 3, 2013

Building Pharo using Interpreter Class

by Kirstin Heidler

My freind Dimitri was not able to post his message. I am working with him on this. _______________________________________________________________________________ Hello, as part of a Seminar in the University im trying to build the PharoVM. According to the README file here ([1]) I was able to generate and to build the VM successfully. Now I would like to build the VM without Cog or Stack-to-Register optimizations... The problem here is, that I could not find any config class (which is a subclass of CPlatformConfig), that provides the right configurations and allows to build the VM without errors. I have tried to modify PharoUnixConfig(because it was the default config class), but unfortunately the build failes when the compiler tries to compile gcc3x-interp.c. Could somebody help me with this problem? How should I configure my own Config class? Basically our Group tries to implement an object table in Pharo and we want to use (and modify) the basic Interpreter class. [1] https://github.com/pharo-project/pharo-vm Best regards, Dimitri Korsch

Dec. 3, 2013

Draw table in Pharo

by Damien Cassou

http://stackoverflow.com/questions/20304099/draw-table-in-pharo -- Damien Cassou http://damiencassou.seasidehosting.st "Success is the ability to go from one failure to another without losing enthusiasm." Winston Churchill

Dec. 3, 2013

Phexample question

by Sean P. DeNigris

Would it be difficult to be able to supply tests from other TestCases to #given:? Something like #given: aSelector in: #aTestCaseClass... ----- Cheers, Sean -- View this message in context: http://forum.world.st/Phexample-question-tp4726864.html Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

Dec. 2, 2013

Re: [Pharo-users] Obtain the name of the disk unit

by Nicolai Hess

2013/12/2 <btc(a)openinworld.com> > Gisela Decuzzi wrote: > >> Hi, I need to do a validation and check if the image is running in an usb >> with a spefic name. >> I found how to determine the execution path: FileSystem disk >> workingDirectory, but I wolud like to obtain the disk name and didn't find >> a message for that. >> Does anybody know how to do this? >> > Not that I can help :) > but what operating system? > Can you give one example of a disk name you would expect to get? > > cheers, Ben > > I am pretty sure that it is not possible. Getting the volume label is platform dependent. And I can not find any reference on this in the fileplugin. On windows you would need to call GetVolumeInformation(). A quick solution for win32 with help from NativeBoosts FFI: NBWin32Shell class >>getVolumeLabel: aPath buffer: aBuffer size: anInteger <primitive: #primitiveNativeCall module: #NativeBoostPlugin error: errorCode > ^ self nbCall: #( bool GetVolumeInformationA ( String aPath, char* aBuffer, int anInteger, 0, 0, 0, nil, 0)) module: #Kernel32 For example use that: |diskpath buffer label root | diskpath:= FileSystem disk workingDirectory path. root := diskpath segments first, diskpath delimiter asString. buffer := String new:255. label:=(NBWin32Shell getVolumeLabel: root buffer: buffer size: (buffer size)) ifTrue:[buffer allButLast] ifFalse:['']. label A note on GetVolumeInformation, if you want to retrieve the label of the current working directory, you'll have to add a trailing delimiter (c:\ works, c: only works if it isn't the root of the current working directory!) best regards Nicolai

Dec. 2, 2013

Re: [Pharo-users] Seaside on Pharo 3.0

by phil＠highoctane.be

The first time as it will prime the package-cache. After that it is faster :-) And you should get a faster box.

Dec. 2, 2013

Re: [Pharo-users] Seaside on Pharo 3.0

by Luc Fabresse

2013/12/2 Benjamin <Benjamin.VanRyseghem.Pharo(a)gmail.com> > But I still think the ci job should be preferred :P > +1 ;-) Luc > > Ben > > On 02 Dec 2013, at 18:13, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: > > Nope, that was the old version. This one should not take mora than 10min :) > > On 2 Dec 2013, at 17:58, Benjamin <Benjamin.VanRyseghem.Pharo(a)gmail.com> > wrote: > > and it will take 40 minutes :P > > Ben > > On 02 Dec 2013, at 17:56, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: > > this should work: > > $ wget -O- get.pharo.org/30+vm | bash > $ ./pharo ./Pharo.image config > http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main ConfigurationOfSeaside3 > --install=stable > > cheers, > Esteban > > > On Mon, Dec 2, 2013 at 5:50 PM, sminni <sm(a)planage.com> wrote: > >> Hi >> >> Pls guide me in getting an environment of Seaside / Zinc / Pharo 3.0 up >> and >> running >> >> >> Regards >> Sanjay >> >> >> >> ----- >> --- >> Regards, Sanjay >> -- >> View this message in context: >> http://forum.world.st/Seaside-on-Pharo-3-0-tp4726765.html >> Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com<http://nabble.com/> >> . >> >> > > >

Dec. 2, 2013

Re: [Pharo-users] Seaside on Pharo 3.0

by Benjamin

But I still think the ci job should be preferred :P Ben On 02 Dec 2013, at 18:13, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: > Nope, that was the old version. This one should not take mora than 10min :) > > On 2 Dec 2013, at 17:58, Benjamin <Benjamin.VanRyseghem.Pharo(a)gmail.com> wrote: > >> and it will take 40 minutes :P >> >> Ben >> >> On 02 Dec 2013, at 17:56, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: >> >>> this should work: >>> >>> $ wget -O- get.pharo.org/30+vm | bash >>> $ ./pharo ./Pharo.image config http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main ConfigurationOfSeaside3 --install=stable >>> >>> cheers, >>> Esteban >>> >>> >>> On Mon, Dec 2, 2013 at 5:50 PM, sminni <sm(a)planage.com> wrote: >>> Hi >>> >>> Pls guide me in getting an environment of Seaside / Zinc / Pharo 3.0 up and >>> running >>> >>> >>> Regards >>> Sanjay >>> >>> >>> >>> ----- >>> --- >>> Regards, Sanjay >>> -- >>> View this message in context: http://forum.world.st/Seaside-on-Pharo-3-0-tp4726765.html >>> Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. >>> >>> >>

Dec. 2, 2013

Re: [Pharo-users] Seaside on Pharo 3.0

by Esteban Lorenzano

Nope, that was the old version. This one should not take mora than 10min :) > On 2 Dec 2013, at 17:58, Benjamin <Benjamin.VanRyseghem.Pharo(a)gmail.com> wrote: > > and it will take 40 minutes :P > > Ben > >> On 02 Dec 2013, at 17:56, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: >> >> this should work: >> >> $ wget -O- get.pharo.org/30+vm | bash >> $ ./pharo ./Pharo.image config http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main ConfigurationOfSeaside3 --install=stable >> >> cheers, >> Esteban >> >> >>> On Mon, Dec 2, 2013 at 5:50 PM, sminni <sm(a)planage.com> wrote: >>> Hi >>> >>> Pls guide me in getting an environment of Seaside / Zinc / Pharo 3.0 up and >>> running >>> >>> >>> Regards >>> Sanjay >>> >>> >>> >>> ----- >>> --- >>> Regards, Sanjay >>> -- >>> View this message in context: http://forum.world.st/Seaside-on-Pharo-3-0-tp4726765.html >>> Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. >

Dec. 2, 2013

Re: [Pharo-users] Seaside on Pharo 3.0

by Benjamin

and it will take 40 minutes :P Ben On 02 Dec 2013, at 17:56, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: > this should work: > > $ wget -O- get.pharo.org/30+vm | bash > $ ./pharo ./Pharo.image config http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main ConfigurationOfSeaside3 --install=stable > > cheers, > Esteban > > > On Mon, Dec 2, 2013 at 5:50 PM, sminni <sm(a)planage.com> wrote: > Hi > > Pls guide me in getting an environment of Seaside / Zinc / Pharo 3.0 up and > running > > > Regards > Sanjay > > > > ----- > --- > Regards, Sanjay > -- > View this message in context: http://forum.world.st/Seaside-on-Pharo-3-0-tp4726765.html > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > >

Dec. 2, 2013

Re: [Pharo-users] Seaside on Pharo 3.0

by Esteban Lorenzano

this should work: $ wget -O- get.pharo.org/30+vm | bash $ ./pharo ./Pharo.image config http://smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main ConfigurationOfSeaside3 --install=stable cheers, Esteban On Mon, Dec 2, 2013 at 5:50 PM, sminni <sm(a)planage.com> wrote: > Hi > > Pls guide me in getting an environment of Seaside / Zinc / Pharo 3.0 up and > running > > > Regards > Sanjay > > > > ----- > --- > Regards, Sanjay > -- > View this message in context: > http://forum.world.st/Seaside-on-Pharo-3-0-tp4726765.html > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > >

Dec. 2, 2013

Re: [Pharo-users] Seaside on Pharo 3.0

by Benjamin

This is the link you want https://ci.inria.fr/pharo-contribution/job/Seaside/ Ben On 02 Dec 2013, at 17:50, sminni <sm(a)planage.com> wrote: > Hi > > Pls guide me in getting an environment of Seaside / Zinc / Pharo 3.0 up and > running > > > Regards > Sanjay > > > > ----- > --- > Regards, Sanjay > -- > View this message in context: http://forum.world.st/Seaside-on-Pharo-3-0-tp4726765.html > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. >

Dec. 2, 2013

Re: [Pharo-users] Add menu item to Nautilus context menu on selected packages?

by Benjamin

No idea â¦ I do not added it, so I can not tell Ben On 02 Dec 2013, at 15:25, MartinW <wm(a)fastmail.fm> wrote: > I have one follow-up question trying to understand how this works: > I see that <nautilusXXXMenu> is used in AbstractNautilusUI to build the > menus â but why is <contextMenu> here? Also the code seems to work all the > same without <contextMenu>? > > Martin. > > > Benjamin Van Ryseghem-2 wrote >> Here is an example from Nautilus >> >> AbstractNautilusUI class>>packagesMenu: aBuilder >> >> <contextMenu> >> >> <nautilusGlobalPackageMenu> >> | package target | >> target := aBuilder model. >> >> (package := target selectedPackage) ifNil: [ ^ target ]. >> >> (aBuilder item: #'Browse scoped') >> keyText: 'b, s' if: Nautilus useOldStyleKeys not; >> action: [ target restrictedBrowsePackage ]; >> order: 1000; >> help: 'Open a browser on a restricted view'; >> withSeparatorAfter. > > > > > > -- > View this message in context: http://forum.world.st/Add-menu-item-to-Nautilus-context-menu-on-selected-pa… > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. >

Dec. 2, 2013