- Pharo-users - lists.pharo.org

Re: [Pharo-users] Configuring iceberg on Windows

by Ben Coman

On Fri, 7 Sep 2018 at 10:11, Andrei Stebakov <lispercat(a)gmail.com> wrote: > I was trying debug it a little to see if how iceberg uses the path to > private and public keys. When I mangle the path to something non-existent I > got no error saying that the path is wrong. What would be a way to verify > that iceberg actually uses the keys? > I don't know. Just wanted to suggest it would be useful to have a <Test> button under "Use custom SSH keys" that does the equivalent of "ssh -T git(a)github.com" https://help.github.com/articles/testing-your-ssh-connection/ cheers -ben

Sept. 7, 2018

Re: [Pharo-users] Configuring iceberg on Windows

by Andrei Stebakov

I was trying debug it a little to see if how iceberg uses the path to private and public keys. When I mangle the path to something non-existant I got no error saying that the path is wrong. What would be a way to verify that iceberg actually uses the keys? On Thu, Sep 6, 2018, 16:35 Peter Uhnak <i.uhnak(a)gmail.com> wrote: > > I need to get past that error since I get it even when I install Moose > via Metacello. > > Note that Moose depends on projects that are on github, so if it is > misconfigured, then it will fail. > Maybe you can provide both the ssh key and regular key/password? I use > both and so far I had no problems on neither Windows nor Linux. > > Peter > > On Thu, Sep 6, 2018 at 6:28 PM Ben Coman <btc(a)openinworld.com> wrote: > >> On Thu, 6 Sep 2018 at 21:58, Andrei Stebakov <lispercat(a)gmail.com> wrote: >> >>> I followed the tutorial >>> >> >> Hi Andrei, Could you be specific about which tutorial that was. I'm not >> sure if I'm just getting by on old knowledge >> or the much improved Iceberg UI and its good to refresh myself with such >> tutorials. >> >> >> >>> and provided IceCredentialProvider with ssh settings, also put the same >>> settings in Settings-Tools-Software Configuration Management. >>> It seems not to have any effect since when I try to create a repo using >>> SSH it gives the error "Failed to connect to github.com". >>> I need to get past that error since I get it even when I install Moose >>> via Metacello. >>> Do I need to add ssh-agent as well? If yes, why do we need to provide >>> public/private key paths with IceCredentialProvider? >>> >> >> In the past I had github+ssh working on Windows with "Use custom SSH >> keys" enabled" >> but then a while ago it stopped for "no apparent reason"(TM). >> Co-incidentally a few hours ago I solved my problem. >> >> I went back to basics checking from command line per... >> https://help.github.com/articles/testing-your-ssh-connection/ >> and found ```ssh -T git(a)github.com``` erroring with... >> "@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ >> @ WARNING: UNPROTECTED PRIVATE KEY FILE! @ >> @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ >> Permissions for 'C:\\Users\\Ben/.ssh/id_rsa' are too open. >> It is required that your private key files are NOT accessible by others. >> This private key will be ignored. >> Load key "C:\\Users\\Ben/.ssh/id_rsa": bad permissions >> git(a)github.com: Permission denied (publickey). >> >> I right-clicked on my folder C:\Users\ben\.ssh >> then Properties > Security > Advanced > Disable Inheritance >> then removed SYSTEM, Administrator & Administrators leaving only BEN. >> >> Then this worked... >> C:>ssh -T git(a)github.com >> Hi bencoman! You've successfully authenticated, but GitHub does not >> provide shell access. >> >> And now also worked from within Pharo (with "Use custom SSH keys" >> enabled") >> >> HTH, cheers -ben >> >

Sept. 7, 2018

adding instance variables (data) to the Object class

by Petr Fischer

Hello! Weird question: why I can't add instance variables to the Object class (for example "oid" or something else)? Is it due to some internal (and different) VM "class layouts"? Or - can I inject my own information to all existing objects (any class)? Thanks! pf

Sept. 6, 2018

Re: [Pharo-users] Configuring iceberg on Windows

by Peter Uhnak

> I need to get past that error since I get it even when I install Moose via Metacello. Note that Moose depends on projects that are on github, so if it is misconfigured, then it will fail. Maybe you can provide both the ssh key and regular key/password? I use both and so far I had no problems on neither Windows nor Linux. Peter On Thu, Sep 6, 2018 at 6:28 PM Ben Coman <btc(a)openinworld.com> wrote: > On Thu, 6 Sep 2018 at 21:58, Andrei Stebakov <lispercat(a)gmail.com> wrote: > >> I followed the tutorial >> > > Hi Andrei, Could you be specific about which tutorial that was. I'm not > sure if I'm just getting by on old knowledge > or the much improved Iceberg UI and its good to refresh myself with such > tutorials. > > > >> and provided IceCredentialProvider with ssh settings, also put the same >> settings in Settings-Tools-Software Configuration Management. >> It seems not to have any effect since when I try to create a repo using >> SSH it gives the error "Failed to connect to github.com". >> I need to get past that error since I get it even when I install Moose >> via Metacello. >> Do I need to add ssh-agent as well? If yes, why do we need to provide >> public/private key paths with IceCredentialProvider? >> > > In the past I had github+ssh working on Windows with "Use custom SSH keys" > enabled" > but then a while ago it stopped for "no apparent reason"(TM). > Co-incidentally a few hours ago I solved my problem. > > I went back to basics checking from command line per... > https://help.github.com/articles/testing-your-ssh-connection/ > and found ```ssh -T git(a)github.com``` erroring with... > "@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ > @ WARNING: UNPROTECTED PRIVATE KEY FILE! @ > @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ > Permissions for 'C:\\Users\\Ben/.ssh/id_rsa' are too open. > It is required that your private key files are NOT accessible by others. > This private key will be ignored. > Load key "C:\\Users\\Ben/.ssh/id_rsa": bad permissions > git(a)github.com: Permission denied (publickey). > > I right-clicked on my folder C:\Users\ben\.ssh > then Properties > Security > Advanced > Disable Inheritance > then removed SYSTEM, Administrator & Administrators leaving only BEN. > > Then this worked... > C:>ssh -T git(a)github.com > Hi bencoman! You've successfully authenticated, but GitHub does not > provide shell access. > > And now also worked from within Pharo (with "Use custom SSH keys" enabled") > > HTH, cheers -ben >

Sept. 6, 2018

Re: [Pharo-users] [Moose-dev] Re: [cormas-dev] Pharo eye-candy: Domain-Specific Modeling and Simulation

by Nick Papoylias

On Thu, Sep 6, 2018 at 9:28 PM Tudor Girba <tudor(a)tudorgirba.com> wrote: > Hi, > > Bloc is a new world and the intention is to build a new stack on it. It > can be embedded in Morphic, This will have to do for now ;) Thanx for your great efforts ! > but not the other way around. Higher level frameworks, like Spec would > have to build a renderer for Bloc. > Cheers, > Doru > > > > > On Sep 6, 2018, at 8:45 PM, Nick Papoylias <npapoylias(a)gmail.com> wrote: > > > > Thanx Doru ! > > > > Any pointers on embeding Morphs/Specs/RTViews to the > > new GT tools (and vice versa), if possible ? > > > > I am looking to achive smth similar to what Johan and Stef did > > on Sec 9.1 of the Spec Book: "Integrating the different UI frameworks", > > but with the Bloc version of GT. > > > > > > > > On Thu, Sep 6, 2018 at 8:24 PM Tudor Girba <tudor(a)tudorgirba.com> wrote: > > Nice job! > > > > Doru > > > > > > > > > On Sep 6, 2018, at 8:10 PM, Nick Papoylias <npapoylias(a)gmail.com> > wrote: > > > > > > Some of this tech, will soon make it to Cormas ;) > > > > > > So we can work together to make it even better ! > > > > > > Best, > > > > > > Nick > > > > > > On Thu, Sep 6, 2018 at 7:59 PM HernÃ¡n Morales Durand < > hernan.morales(a)gmail.com> wrote: > > > Impressive work! > > > > > > Congratulations Nick. > > > > > > Cheers, > > > > > > HernÃ¡n > > > > > > 2018-09-06 14:17 GMT-03:00 Nick Papoylias <npapoylias(a)gmail.com>: > > > > A nice example of how Pharo can be used for > > > > domain-specific modeling and simulation. Short > > > > session from one of our projects at Rochelle: > > > > > > > > https://www.youtube.com/watch?v=Z7wJNhAIaVQ > > > > > > > > Some additional info here: https://goo.gl/jS4NjB > > > > > > > > Currently investigating how to incorporate the new Bloc based > > > > widgets of @feenkcom into the workflow. > > > > > > > > Cheers, > > > > > > > > Nick > > > > > > > > -- > > > > You received this message because you are subscribed to the Google > Groups > > > > "cormas-dev" group. > > > > To unsubscribe from this group and stop receiving emails from it, > send an > > > > email to cormas-dev+unsubscribe(a)googlegroups.com. > > > > To post to this group, send email to cormas-dev(a)googlegroups.com. > > > > To view this discussion on the web visit > > > > > https://groups.google.com/d/msgid/cormas-dev/CACEStOjqbQt96qeae_4Nsf%3DEBqr… > . > > > > For more options, visit https://groups.google.com/d/optout. > > > > > > -- > > > You received this message because you are subscribed to the Google > Groups "cormas-dev" group. > > > To unsubscribe from this group and stop receiving emails from it, send > an email to cormas-dev+unsubscribe(a)googlegroups.com. > > > To post to this group, send email to cormas-dev(a)googlegroups.com. > > > To view this discussion on the web visit > https://groups.google.com/d/msgid/cormas-dev/CAKHmnHuSE38ureMsiAO5gHj5AJVzk… > . > > > For more options, visit https://groups.google.com/d/optout. > > > _______________________________________________ > > > Moose-dev mailing list > > > Moose-dev(a)list.inf.unibe.ch > > > https://www.list.inf.unibe.ch/listinfo/moose-dev > > > > -- > > www.feenk.com > > > > "No matter how many recipes we know, we still value a chef." > > > > > > > > > > > > > > > > > > _______________________________________________ > > Moose-dev mailing list > > Moose-dev(a)list.inf.unibe.ch > > https://www.list.inf.unibe.ch/listinfo/moose-dev > > _______________________________________________ > > Moose-dev mailing list > > Moose-dev(a)list.inf.unibe.ch > > https://www.list.inf.unibe.ch/listinfo/moose-dev > > -- > www.feenk.com > > âThe smaller and more pervasive the hardware becomes, the more physical > the software gets." > > _______________________________________________ > Moose-dev mailing list > Moose-dev(a)list.inf.unibe.ch > https://www.list.inf.unibe.ch/listinfo/moose-dev >

Sept. 6, 2018

Re: [Pharo-users] [Moose-dev] [cormas-dev] Pharo eye-candy: Domain-Specific Modeling and Simulation

by Tudor Girba

Hi, Bloc is a new world and the intention is to build a new stack on it. It can be embedded in Morphic, but not the other way around. Higher level frameworks, like Spec would have to build a renderer for Bloc. Cheers, Doru > On Sep 6, 2018, at 8:45 PM, Nick Papoylias <npapoylias(a)gmail.com> wrote: > > Thanx Doru ! > > Any pointers on embeding Morphs/Specs/RTViews to the > new GT tools (and vice versa), if possible ? > > I am looking to achive smth similar to what Johan and Stef did > on Sec 9.1 of the Spec Book: "Integrating the different UI frameworks", > but with the Bloc version of GT. > > > > On Thu, Sep 6, 2018 at 8:24 PM Tudor Girba <tudor(a)tudorgirba.com> wrote: > Nice job! > > Doru > > > > > On Sep 6, 2018, at 8:10 PM, Nick Papoylias <npapoylias(a)gmail.com> wrote: > > > > Some of this tech, will soon make it to Cormas ;) > > > > So we can work together to make it even better ! > > > > Best, > > > > Nick > > > > On Thu, Sep 6, 2018 at 7:59 PM HernÃ¡n Morales Durand <hernan.morales(a)gmail.com> wrote: > > Impressive work! > > > > Congratulations Nick. > > > > Cheers, > > > > HernÃ¡n > > > > 2018-09-06 14:17 GMT-03:00 Nick Papoylias <npapoylias(a)gmail.com>: > > > A nice example of how Pharo can be used for > > > domain-specific modeling and simulation. Short > > > session from one of our projects at Rochelle: > > > > > > https://www.youtube.com/watch?v=Z7wJNhAIaVQ > > > > > > Some additional info here: https://goo.gl/jS4NjB > > > > > > Currently investigating how to incorporate the new Bloc based > > > widgets of @feenkcom into the workflow. > > > > > > Cheers, > > > > > > Nick > > > > > > -- > > > You received this message because you are subscribed to the Google Groups > > > "cormas-dev" group. > > > To unsubscribe from this group and stop receiving emails from it, send an > > > email to cormas-dev+unsubscribe(a)googlegroups.com. > > > To post to this group, send email to cormas-dev(a)googlegroups.com. > > > To view this discussion on the web visit > > > https://groups.google.com/d/msgid/cormas-dev/CACEStOjqbQt96qeae_4Nsf%3DEBqr…. > > > For more options, visit https://groups.google.com/d/optout. > > > > -- > > You received this message because you are subscribed to the Google Groups "cormas-dev" group. > > To unsubscribe from this group and stop receiving emails from it, send an email to cormas-dev+unsubscribe(a)googlegroups.com. > > To post to this group, send email to cormas-dev(a)googlegroups.com. > > To view this discussion on the web visit https://groups.google.com/d/msgid/cormas-dev/CAKHmnHuSE38ureMsiAO5gHj5AJVzk…. > > For more options, visit https://groups.google.com/d/optout. > > _______________________________________________ > > Moose-dev mailing list > > Moose-dev(a)list.inf.unibe.ch > > https://www.list.inf.unibe.ch/listinfo/moose-dev > > -- > www.feenk.com > > "No matter how many recipes we know, we still value a chef." > > > > > > > > > _______________________________________________ > Moose-dev mailing list > Moose-dev(a)list.inf.unibe.ch > https://www.list.inf.unibe.ch/listinfo/moose-dev > _______________________________________________ > Moose-dev mailing list > Moose-dev(a)list.inf.unibe.ch > https://www.list.inf.unibe.ch/listinfo/moose-dev -- www.feenk.com âThe smaller and more pervasive the hardware becomes, the more physical the software gets."

Sept. 6, 2018

Re: [Pharo-users] [Moose-dev] Re: [cormas-dev] Pharo eye-candy: Domain-Specific Modeling and Simulation

by Nick Papoylias

Thanx Doru ! Any pointers on embeding Morphs/Specs/RTViews to the new GT tools (and vice versa), if possible ? I am looking to achive smth similar to what Johan and Stef did on Sec 9.1 of the Spec Book <http://files.pharo.org/books-pdfs/spec/2017-01-23-SpecBooklet.pdf>: "Integrating the different UI frameworks", but with the Bloc version of GT. On Thu, Sep 6, 2018 at 8:24 PM Tudor Girba <tudor(a)tudorgirba.com> wrote: > Nice job! > > Doru > > > > > On Sep 6, 2018, at 8:10 PM, Nick Papoylias <npapoylias(a)gmail.com> wrote: > > > > Some of this tech, will soon make it to Cormas ;) > > > > So we can work together to make it even better ! > > > > Best, > > > > Nick > > > > On Thu, Sep 6, 2018 at 7:59 PM HernÃ¡n Morales Durand < > hernan.morales(a)gmail.com> wrote: > > Impressive work! > > > > Congratulations Nick. > > > > Cheers, > > > > HernÃ¡n > > > > 2018-09-06 14:17 GMT-03:00 Nick Papoylias <npapoylias(a)gmail.com>: > > > A nice example of how Pharo can be used for > > > domain-specific modeling and simulation. Short > > > session from one of our projects at Rochelle: > > > > > > https://www.youtube.com/watch?v=Z7wJNhAIaVQ > > > > > > Some additional info here: https://goo.gl/jS4NjB > > > > > > Currently investigating how to incorporate the new Bloc based > > > widgets of @feenkcom into the workflow. > > > > > > Cheers, > > > > > > Nick > > > > > > -- > > > You received this message because you are subscribed to the Google > Groups > > > "cormas-dev" group. > > > To unsubscribe from this group and stop receiving emails from it, send > an > > > email to cormas-dev+unsubscribe(a)googlegroups.com. > > > To post to this group, send email to cormas-dev(a)googlegroups.com. > > > To view this discussion on the web visit > > > > https://groups.google.com/d/msgid/cormas-dev/CACEStOjqbQt96qeae_4Nsf%3DEBqr… > . > > > For more options, visit https://groups.google.com/d/optout. > > > > -- > > You received this message because you are subscribed to the Google > Groups "cormas-dev" group. > > To unsubscribe from this group and stop receiving emails from it, send > an email to cormas-dev+unsubscribe(a)googlegroups.com. > > To post to this group, send email to cormas-dev(a)googlegroups.com. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/cormas-dev/CAKHmnHuSE38ureMsiAO5gHj5AJVzk… > . > > For more options, visit https://groups.google.com/d/optout. > > _______________________________________________ > > Moose-dev mailing list > > Moose-dev(a)list.inf.unibe.ch > > https://www.list.inf.unibe.ch/listinfo/moose-dev > > -- > www.feenk.com > > "No matter how many recipes we know, we still value a chef." > > > > > > > > > _______________________________________________ > Moose-dev mailing list > Moose-dev(a)list.inf.unibe.ch > https://www.list.inf.unibe.ch/listinfo/moose-dev >

Sept. 6, 2018

Re: [Pharo-users] [cormas-dev] Pharo eye-candy: Domain-Specific Modeling and Simulation

by serge.stinckwich＠gmail.com

Great ! A presentation of CORMAS simulation platform will be done at next ESUG. See you there. EnvoyÃ© de mon iPhone > Le 6 sept. 2018 Ã 19:17, Nick Papoylias <npapoylias(a)gmail.com> a Ã©crit : > > A nice example of how Pharo can be used for > domain-specific modeling and simulation. Short > session from one of our projects at Rochelle: > > https://www.youtube.com/watch?v=Z7wJNhAIaVQ > > Some additional info here: https://goo.gl/jS4NjB > > Currently investigating how to incorporate the new Bloc based > widgets of @feenkcom into the workflow. > > Cheers, > > Nick > -- > You received this message because you are subscribed to the Google Groups "cormas-dev" group. > To unsubscribe from this group and stop receiving emails from it, send an email to cormas-dev+unsubscribe(a)googlegroups.com. > To post to this group, send email to cormas-dev(a)googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/msgid/cormas-dev/CACEStOjqbQt96qeae_4Nsf%3DEBqr…. > For more options, visit https://groups.google.com/d/optout.

Sept. 6, 2018

Re: [Pharo-users] [Moose-dev] [cormas-dev] Pharo eye-candy: Domain-Specific Modeling and Simulation

by Tudor Girba

Nice job! Doru > On Sep 6, 2018, at 8:10 PM, Nick Papoylias <npapoylias(a)gmail.com> wrote: > > Some of this tech, will soon make it to Cormas ;) > > So we can work together to make it even better ! > > Best, > > Nick > > On Thu, Sep 6, 2018 at 7:59 PM HernÃ¡n Morales Durand <hernan.morales(a)gmail.com> wrote: > Impressive work! > > Congratulations Nick. > > Cheers, > > HernÃ¡n > > 2018-09-06 14:17 GMT-03:00 Nick Papoylias <npapoylias(a)gmail.com>: > > A nice example of how Pharo can be used for > > domain-specific modeling and simulation. Short > > session from one of our projects at Rochelle: > > > > https://www.youtube.com/watch?v=Z7wJNhAIaVQ > > > > Some additional info here: https://goo.gl/jS4NjB > > > > Currently investigating how to incorporate the new Bloc based > > widgets of @feenkcom into the workflow. > > > > Cheers, > > > > Nick > > > > -- > > You received this message because you are subscribed to the Google Groups > > "cormas-dev" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to cormas-dev+unsubscribe(a)googlegroups.com. > > To post to this group, send email to cormas-dev(a)googlegroups.com. > > To view this discussion on the web visit > > https://groups.google.com/d/msgid/cormas-dev/CACEStOjqbQt96qeae_4Nsf%3DEBqr…. > > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups "cormas-dev" group. > To unsubscribe from this group and stop receiving emails from it, send an email to cormas-dev+unsubscribe(a)googlegroups.com. > To post to this group, send email to cormas-dev(a)googlegroups.com. > To view this discussion on the web visit https://groups.google.com/d/msgid/cormas-dev/CAKHmnHuSE38ureMsiAO5gHj5AJVzk…. > For more options, visit https://groups.google.com/d/optout. > _______________________________________________ > Moose-dev mailing list > Moose-dev(a)list.inf.unibe.ch > https://www.list.inf.unibe.ch/listinfo/moose-dev -- www.feenk.com "No matter how many recipes we know, we still value a chef."

Sept. 6, 2018

Re: [Pharo-users] [cormas-dev] Pharo eye-candy: Domain-Specific Modeling and Simulation

by Nick Papoylias

Some of this tech, will soon make it to Cormas ;) So we can work together to make it even better ! Best, Nick On Thu, Sep 6, 2018 at 7:59 PM HernÃ¡n Morales Durand < hernan.morales(a)gmail.com> wrote: > Impressive work! > > Congratulations Nick. > > Cheers, > > HernÃ¡n > > 2018-09-06 14:17 GMT-03:00 Nick Papoylias <npapoylias(a)gmail.com>: > > A nice example of how Pharo can be used for > > domain-specific modeling and simulation. Short > > session from one of our projects at Rochelle: > > > > https://www.youtube.com/watch?v=Z7wJNhAIaVQ > > > > Some additional info here: https://goo.gl/jS4NjB > > > > Currently investigating how to incorporate the new Bloc based > > widgets of @feenkcom into the workflow. > > > > Cheers, > > > > Nick > > > > -- > > You received this message because you are subscribed to the Google Groups > > "cormas-dev" group. > > To unsubscribe from this group and stop receiving emails from it, send an > > email to cormas-dev+unsubscribe(a)googlegroups.com. > > To post to this group, send email to cormas-dev(a)googlegroups.com. > > To view this discussion on the web visit > > > https://groups.google.com/d/msgid/cormas-dev/CACEStOjqbQt96qeae_4Nsf%3DEBqr… > . > > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "cormas-dev" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to cormas-dev+unsubscribe(a)googlegroups.com. > To post to this group, send email to cormas-dev(a)googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/cormas-dev/CAKHmnHuSE38ureMsiAO5gHj5AJVzk… > . > For more options, visit https://groups.google.com/d/optout. >

Sept. 6, 2018