- Pharo-users - lists.pharo.org

Re: [Pharo-users] ZnURL and parsing URL with diacritics

by PBKResearch

Hi Petr I have used #urlEncoded in the past, with success, to deal with German umlauts. The secret is to urlEncode just the part containing the diacritics. If you encode the whole url, the slashes are encoded, and this confuses Zinc, which segments the url before decoding. So I would expect you to be able to read your file with: ZnEasy get: 'http://domain.com/','ÄÅ¡ÄÃ½Å¾.html' urlEncoded. However, this also fails with 'ASCII character expected', and I can't understand why. The debug trace has too many levels for me to understand. Zinc is evidently getting in a mess trying to decode the urlEncoded string, but if we try: 'ÄÅ¡ÄÃ½Å¾.html' urlEncoded urlDecoded as a separate operation, it works OK. I think only Sven can explain this for you. HTH Peter Kenny From: Pharo-users <pharo-users-bounces(a)lists.pharo.org> On Behalf Of Petr Fischer via Pharo-users Sent: 10 September 2018 10:07 To: pharo-users(a)lists.pharo.org Cc: Petr Fischer <petr.fischer(a)me.com> Subject: [Pharo-users] ZnURL and parsing URL with diacritics Hello, when I try to parse this URL asUrl, error "ZnCharacterEncodingError: ASCII character expected" occurs: 'http://domain.com/ÄÅ¡ÄÃ½Å¾.html' asUrl. this also does not work: ZnEasy get: 'http://domain.com/ÄÅ¡ÄÃ½Å¾.html' How to solve this? In the web browser, URL with diacritics is OK. I tried also this: ZnEasy get: 'http://domain.com/ÄÅ¡ÄÃ½Å¾.html' urlEncoded. but this cripples the whole URL. Thanks! Petr Fischer

Sept. 10, 2018

ZnURL and parsing URL with diacritics

by Petr Fischer

Hello, when I try to parse this URL asUrl, error "ZnCharacterEncodingError: ASCII character expected" occurs: 'http://domain.com/ÄÅ¡ÄÃ½Å¾.html' asUrl. this also does not work: ZnEasy get: 'http://domain.com/ÄÅ¡ÄÃ½Å¾.html' How to solve this? In the web browser, URL with diacritics is OK. I tried also this: ZnEasy get: 'http://domain.com/ÄÅ¡ÄÃ½Å¾.html' urlEncoded. but this cripples the whole URL. Thanks! Petr Fischer

Sept. 10, 2018

Re: [Pharo-users] memorizing data between tests

by Esteban Maringolo

You can use a TestResource for it, and use some sort of memoization. I don't know if there is a library for memoization in Pharo, but if the HTTP calls are not that many you can implement it by having a cache in the test resource, implemented as a dictionary, with the URL as key and its cached response as value. Regards, Esteban A. Maringolo El dom., 9 sept. 2018 a las 5:11, Peter Uhnak (<i.uhnak(a)gmail.com>) escribiÃ³: > > Hi Ben, > > take a look at TestResource (its comment and subclasses). It should do what you are looking for. > > Peter > > On Sun, Sep 9, 2018 at 8:08 AM Ben Coman <btc(a)openinworld.com> wrote: >> >> Say I want to write ten tests for different aspects of a web service point. >> Apart from the risk of relying on an external service, >> I'd like to poll the web service once rather than ten times. >> I wondering about the feasibility of memorizing data between test methods. >> Taking for example... >> TestCase subclass: #MyTest ... >> >> My understanding is that MyTest >> setUp is run once per test method. >> What I guess is missing is a #groupSetup that would be called at the start of a running a group of tests. >> >> MyTest >> groupSetup >> memorized := Dictionary new. >> >> MyTest >> getLiveDataOncePerRun >> ^ memorized at: 'data' ifAbsentPut: [ZnClient new get: 'http://someservice.com/liveData1'. >> >> MyTest >> test1 >> |data| >> data := self getLiveDataOncePerRun . >> self assert: data result1 equals: 'expected result 1' >> >> MyTest >> test2 >> |data| >> data := self getLiveDataOncePerRun. >> self assert: data result2 equals: 'expected result 2' >> >> cheers -ben >>

Sept. 9, 2018

Re: [Pharo-users] Ready to use Roassal?

by Hilaire

Le 09/09/2018 Ã 15:06, Peter Uhnak a Ã©critÂ : > Not sure if this is already fixed in P7, but in P6 sometimes the > catalog would not load properly... so one has to close pharo and open > it again... probably not the best experience for non-pharo user. This was my taught too. > > Also, if your user is using linux, they also need to have > libcairo(i386) installed, otherwise Roassal will not work. This one is ok, this is a Dr. Geo user. Hilaire -- Dr. Geo http://drgeo.eu

Sept. 9, 2018

Re: [Pharo-users] Ready to use Roassal?

by Peter Uhnak

Not sure if this is already fixed in P7, but in P6 sometimes the catalog would not load properly... so one has to close pharo and open it again... probably not the best experience for non-pharo user. Also, if your user is using linux, they also need to have libcairo(i386) installed, otherwise Roassal will not work. Peter On Sun, Sep 9, 2018 at 2:16 PM Hilaire <hilaire(a)drgeo.eu> wrote: > Hello Alexandre, > > Afterward, I have indicated that to this non-pharo user. > > > Le 09/09/2018 Ã 11:36, Alexandre Bergel via Pharo-users a Ã©crit : > > The agilevisualization.com website says: > > > > "Installing Roassal is easy. You need to install Pharo. Open the Catalog > browser, and select Roassal. A video illustrating these steps is online.â > > > > How can I improve the installation instruction? > > > > Also, the Quickstart chapter details the steps: > > > http://agilevisualization.com/AgileVisualization/QuickStart/0101-QuickStart… > I was confused as I did not find this zip file ready to download, as > described in this quick start page. > > Hilaire > > -- > Dr. Geo > http://drgeo.eu > > > >

Sept. 9, 2018

Re: [Pharo-users] [Pharo-dev] Pharo and Docker (some steps)

by Pierce Ng

On Mon, Aug 20, 2018 at 03:10:58PM +0200, Torsten Bergmann wrote: > I recently played with Pharo and Docker and summarized some of my > steps in a small tutorial in my Pharo wiki: Monkey saw, and monkey did. :-) Here's my report on my experimentation: http://www.samadhiweb.com/blog/2018.09.09.docker.html Pierce

Sept. 9, 2018

Re: [Pharo-users] Ready to use Roassal?

by Hilaire

Hello Alexandre, Afterward, I have indicated that to this non-pharo user. Le 09/09/2018 Ã 11:36, Alexandre Bergel via Pharo-users a Ã©critÂ : > The agilevisualization.com website says: > > "Installing Roassal is easy. You need to install Pharo. Open the Catalog browser, and select Roassal. A video illustrating these steps is online.â > > How can I improve the installation instruction? > > Also, the Quickstart chapter details the steps: > http://agilevisualization.com/AgileVisualization/QuickStart/0101-QuickStart… I was confused as I did not find this zip file ready to download, as described in this quick start page. Hilaire -- Dr. Geo http://drgeo.eu

Sept. 9, 2018

Re: [Pharo-users] Ready to use Roassal?

by Alexandre Bergel

Hi Hilaire, > Is there a ready to download and to use Roassal for end user? I am not sure what you mean. For non-pharo user? > I found nothing on http://agilevisualization.com/ I can point a user to. > User unaware of Pharo, Smalltalk, etc. The agilevisualization.com website says: "Installing Roassal is easy. You need to install Pharo. Open the Catalog browser, and select Roassal. A video illustrating these steps is online.â How can I improve the installation instruction? Also, the Quickstart chapter details the steps: http://agilevisualization.com/AgileVisualization/QuickStart/0101-QuickStart… Cheers, Alexandre

Sept. 9, 2018

Re: [Pharo-users] memorizing data between tests

by Ben Coman

That seems to be exactly what I'm looking for. Thanks Peter. cheers -ben On Sun, 9 Sep 2018 at 16:11, Peter Uhnak <i.uhnak(a)gmail.com> wrote: > Hi Ben, > > take a look at TestResource (its comment and subclasses). It should do > what you are looking for. > > Peter > > On Sun, Sep 9, 2018 at 8:08 AM Ben Coman <btc(a)openinworld.com> wrote: > >> Say I want to write ten tests for different aspects of a web service >> point. >> Apart from the risk of relying on an external service, >> I'd like to poll the web service once rather than ten times. >> I wondering about the feasibility of memorizing data between test methods. >> Taking for example... >> TestCase subclass: #MyTest ... >> >> My understanding is that MyTest >> setUp is run once per test method. >> What I guess is missing is a #groupSetup that would be called at the >> start of a running a group of tests. >> >> MyTest >> groupSetup >> memorized := Dictionary new. >> >> MyTest >> getLiveDataOncePerRun >> ^ memorized at: 'data' ifAbsentPut: [ZnClient new get: ' >> http://someservice.com/liveData1'. >> >> MyTest >> test1 >> |data| >> data := self getLiveDataOncePerRun . >> self assert: data result1 equals: 'expected result 1' >> >> MyTest >> test2 >> |data| >> data := self getLiveDataOncePerRun. >> self assert: data result2 equals: 'expected result 2' >> >> cheers -ben >> >>

Sept. 9, 2018

Re: [Pharo-users] memorizing data between tests

by Peter Uhnak

Hi Ben, take a look at TestResource (its comment and subclasses). It should do what you are looking for. Peter On Sun, Sep 9, 2018 at 8:08 AM Ben Coman <btc(a)openinworld.com> wrote: > Say I want to write ten tests for different aspects of a web service point. > Apart from the risk of relying on an external service, > I'd like to poll the web service once rather than ten times. > I wondering about the feasibility of memorizing data between test methods. > Taking for example... > TestCase subclass: #MyTest ... > > My understanding is that MyTest >> setUp is run once per test method. > What I guess is missing is a #groupSetup that would be called at the start > of a running a group of tests. > > MyTest >> groupSetup > memorized := Dictionary new. > > MyTest >> getLiveDataOncePerRun > ^ memorized at: 'data' ifAbsentPut: [ZnClient new get: ' > http://someservice.com/liveData1'. > > MyTest >> test1 > |data| > data := self getLiveDataOncePerRun . > self assert: data result1 equals: 'expected result 1' > > MyTest >> test2 > |data| > data := self getLiveDataOncePerRun. > self assert: data result2 equals: 'expected result 2' > > cheers -ben > >

Sept. 9, 2018