- Pharo-users - lists.pharo.org

Pharo 7 Loading stops at Seaside-Pharo-JSON-Jo....5

by Sanjay Minni

How do I proceed from here ? (Pharo 7 32 bit on Win 10) whle installing a developed package - Loading stops at Seaside-Pharo-JSON-Jo....5 This package depends on the following classes: WAPharoEncoder You must resolve these dependencies before you will be able to load these definitions: WAPharoJsonEncoder WAPharoJsonEncoder>>#delegateOn: WAPharoJsonEncoder>>#initialize WAPharoJsonEncoder>>#initializeJsonTable ----- --- Regards, Sanjay -- Sent from: http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html

Nov. 19, 2018

Iceberg documentation, tutorial, video

by nacho

Hi! I'm trying to learn how to use Iceberg to switch my projects to GutHub. Are there any docs, tutorials o video showing how to configure, use, Iceberg? Thanks in advance! cheers nacho ----- Nacho Smalltalker apprentice. Buenos Aires, Argentina. -- Sent from: http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html

Nov. 19, 2018

Reify RBLiteralNode and RBBlockNode args/return with MetaLink?

by Manuel Leuenberger

Hi, I am currently playing with MetaLinks in Pharo 7 and stumbled upon some issues. For example, I found that instrumenting message sends may break compilation (see https://pharo.fogbugz.com/f/cases/22681/Metalink-on-message-may-break-compi… <https://pharo.fogbugz.com/f/cases/22681/Metalink-on-message-may-break-compi…>). Two other issues also arised: i) How do I reify the value of an RB(Valuel|Literal|LiteralValue)Node? RFValueReification does not work, and there is no reification for literal, value, or literal value nodes. ii) How do I reify arguments and results of blocks? I tried reify context for the block body #before and value for #after block "last", but I often run into the problem of no reification for literals. iii) How are cascaded message sends reified? Am I supposed to instrument the cascade node or the individual message sends? I am grateful for any pointers towards a solution. BTW, Marcus' lecture slides give a great intro to metalinks (http://marcusdenker.de/talks/18LectureMetaLinks/MetaLinks.pdf <http://marcusdenker.de/talks/18LectureMetaLinks/MetaLinks.pdf>). Cheers, Manuel

Nov. 19, 2018

Re: [Pharo-users] Loading ZincHTTPComponents iget stuck in Pharo 7.0.0.RC1-32 bit in Win 10

by Sven Van Caekenberghe

> On 19 Nov 2018, at 08:43, Norbert Hartl <norbert(a)hartl.name> wrote: > > btw. is there a reason there is no version for the code that runs in pharo7? I am switching to GitHub, I did not yet come around to doing an older stable version. I'll try to do one later, but I am not yet finished with all the changes that I want to do. Don't forget that Pharo 7 is a moving target. > Norbert > >> Am 18.11.2018 um 08:53 schrieb Sven Van Caekenberghe <sven(a)stfx.eu>: >> >> For Pharo 7 you need to load #bleedingEdge >> >> Or better still, the baseline in https://github.com/svenvc/zinc >> >> See the Travis CI build there >> >>> On 18 Nov 2018, at 06:41, Sanjay Minni <sm(a)planage.com> wrote: >>> >>> Hi I am trying to load one of our packages which is up and running in Pharo >>> 6.1 in Pharo-7.0.0.RC1 >>> (Pharo 7.0.0.RC1 32bit in Win 10) >>> >>> It gets stuck at Loading Zinc-Character-Encoding-Tests-Sven....43, >>> the environment freezes no further messages. >>> I tried loading only ConfigurationOfZincHTTPComponents in a fresh image - >>> same result (loading 2.9.2 of Conf...ZincHTTP...) >>> >>> how to get around this >>> >>> regards >>> >>> >>> >>> >>> ----- >>> --- >>> Regards, Sanjay >>> -- >>> Sent from: http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html >>> >> >> > >

Nov. 19, 2018

Re: [Pharo-users] Loading ZincHTTPComponents iget stuck in Pharo 7.0.0.RC1-32 bit in Win 10

by Norbert Hartl

btw. is there a reason there is no version for the code that runs in pharo7? Norbert > Am 18.11.2018 um 08:53 schrieb Sven Van Caekenberghe <sven(a)stfx.eu>: > > For Pharo 7 you need to load #bleedingEdge > > Or better still, the baseline in https://github.com/svenvc/zinc > > See the Travis CI build there > >> On 18 Nov 2018, at 06:41, Sanjay Minni <sm(a)planage.com> wrote: >> >> Hi I am trying to load one of our packages which is up and running in Pharo >> 6.1 in Pharo-7.0.0.RC1 >> (Pharo 7.0.0.RC1 32bit in Win 10) >> >> It gets stuck at Loading Zinc-Character-Encoding-Tests-Sven....43, >> the environment freezes no further messages. >> I tried loading only ConfigurationOfZincHTTPComponents in a fresh image - >> same result (loading 2.9.2 of Conf...ZincHTTP...) >> >> how to get around this >> >> regards >> >> >> >> >> ----- >> --- >> Regards, Sanjay >> -- >> Sent from: http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html >> > >

Nov. 19, 2018

Re: [Pharo-users] My Keynote at the Salta Conference

by horrido

That doesn't work for me. First of all, my programming competition has a strong marketing component. I cannot see how to market Smalltalk effectively through AoC. My Salta keynote made this very clear. AoC is unfocussed. It's not language-specific. It's basically all over the place. Second, I envision making the competition public knowledge in the (Canadian) media. Again, I don't see how that's possible with AoC. The competition includes promotional T-shirts. These shouldn't be linked with AoC. I have $25,000 and I'm not going to donate it all to AoC. That's practically no bang for the buck in terms of marketing. philippeback wrote > A good way to do this is to align it with Advent of Code 2018. > > AoC is actually full of interesting challenges and one can do private > leaderboards. > > This will also put Pharo on the AoC map/subreddit where challenges are > discussed. > > Phil > > On Sun, Nov 18, 2018, 15:29 Richard Kenneth Eng < > horrido.hobbies@ > wrote: > > > Some of you may already be aware of my presentation at *Smalltalks > 2018*, >> the outcome of which was full funding for my Smalltalk programming >> competition. See My Keynote at the Salta Conference >> <https://hackernoon.com/my-keynote-at-the-salta-conference-435dfaccc888>. >> >> Three years ago, David Buck provided an outline for the competition. See >> attached. >> >> I would like to use that as a starting point, though I am open to >> alternative suggestions. >> >> The reason for this post is the following... >> >> I need volunteers to code the competition. I am nowhere near qualified to >> do so, as my knowledge of Pharo is limited. >> >> Without help from Pharoers (or, at least, Smalltalkers), the competition >> is in jeopardy. This is a great opportunity to promote Pharo. (The >> original >> competition three years ago was going to use VisualWorks, but since >> Cincom >> did not see fit to support my competition this year, I decided to go with >> Pharo.) >> >> Please contact me if anyone is interested. It would be a terrible shame >> to >> waste this opportunity. >> >> Regards, >> Richard >> -- Sent from: http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html

Nov. 19, 2018

Re: [Pharo-users] My Keynote at the Salta Conference

by phil＠highoctane.be

A good way to do this is to align it with Advent of Code 2018. AoC is actually full of interesting challenges and one can do private leaderboards. This will also put Pharo on the AoC map/subreddit where challenges are discussed. Phil On Sun, Nov 18, 2018, 15:29 Richard Kenneth Eng <horrido.hobbies(a)gmail.com wrote: > Some of you may already be aware of my presentation at *Smalltalks 2018*, > the outcome of which was full funding for my Smalltalk programming > competition. See My Keynote at the Salta Conference > <https://hackernoon.com/my-keynote-at-the-salta-conference-435dfaccc888>. > > Three years ago, David Buck provided an outline for the competition. See > attached. > > I would like to use that as a starting point, though I am open to > alternative suggestions. > > The reason for this post is the following... > > I need volunteers to code the competition. I am nowhere near qualified to > do so, as my knowledge of Pharo is limited. > > Without help from Pharoers (or, at least, Smalltalkers), the competition > is in jeopardy. This is a great opportunity to promote Pharo. (The original > competition three years ago was going to use VisualWorks, but since Cincom > did not see fit to support my competition this year, I decided to go with > Pharo.) > > Please contact me if anyone is interested. It would be a terrible shame to > waste this opportunity. > > Regards, > Richard >

Nov. 18, 2018

My Keynote at the Salta Conference

by Richard Kenneth Eng

Some of you may already be aware of my presentation at *Smalltalks 2018*, the outcome of which was full funding for my Smalltalk programming competition. See My Keynote at the Salta Conference <https://hackernoon.com/my-keynote-at-the-salta-conference-435dfaccc888>. Three years ago, David Buck provided an outline for the competition. See attached. I would like to use that as a starting point, though I am open to alternative suggestions. The reason for this post is the following... I need volunteers to code the competition. I am nowhere near qualified to do so, as my knowledge of Pharo is limited. Without help from Pharoers (or, at least, Smalltalkers), the competition is in jeopardy. This is a great opportunity to promote Pharo. (The original competition three years ago was going to use VisualWorks, but since Cincom did not see fit to support my competition this year, I decided to go with Pharo.) Please contact me if anyone is interested. It would be a terrible shame to waste this opportunity. Regards, Richard

Nov. 18, 2018

Re: [Pharo-users] Issue with starting 32-bit Pharo under Linux

by Ben Coman

On Sun, 18 Nov 2018 at 11:50, Richard Kenneth Eng <horrido.hobbies(a)gmail.com> wrote: > I'm running 32-bit Debian. > > I installed 32-bit Pharo 6.1 using: > *wget -O- https://get.pharo.org <https://get.pharo.org> | bash* > > When I try to run Pharo with: > *./pharo-ui Pharo.image &* > > I get this error: > > PrimitiveFailed: primitive #createDirectory: in UnixStore failed > Does the Image freeze or crash at this point, or can you inspect the stack and let us know what is the path its trying to create? They might allow additional insight as to what is going on. cheers -ben >

Nov. 18, 2018

Re: [Pharo-users] External module not found

by Pierce Ng

On Sat, Nov 17, 2018 at 05:38:28PM -0500, Richard Kenneth Eng wrote: > I have a most peculiar problem. I've been using Pierce Ngâs PasswordCrypt > <http://www.samadhiweb.com/blog/2017.02.18.shacrypt.html> encryption > package with Pharo 5. Now that I'm using Pharo 6, it doesn't seem to work > anymore. The ffiCall:module: message always gives me "External module > not found". I use the library myself on 32-bit Pharo 6, so it works, for me at least. For custom so/dll files such as this library or my custom-built SQLite library, my practice is to place them into the VM directory where the Pharo executable and all its bundled so/dll files are. Then I run following script to start Pharo: #!/bin/sh PHAROVMPATH=$(dirname `readlink -f "$0"`) LD_LIBRARY_PATH="$PHAROVMPATH" exec "$PHAROVMPATH/pharo" $@ & Pierce

Nov. 18, 2018