- Pharo-users - lists.pharo.org

Fwd: Gettext package for 2.0 - information not updated

by Usman Bhatti

Hello, I am looking to see how localization works in Pharo. There is a pharo book chapter that explains how to make it work but the chapter explains the working on Pharo 1.4. http://book.pharo-project.org/book/LanguageAndLibraries/Localisation Recent changes in STHub allow to load the package in Pharo 2.0 but I see a lot of references to FileDirectory (deprecated in 2.0) and hence the tutorial in the book does not work. The other package: System-Localization does not have much documentation so that does not help either. Can someone point to a working tutorial for Pharo localization for 2.0? tx, Usman

May 27, 2013

Re: [Pharo-users] How to install SandstoneDb

by Bahman Movaqar

On 2013-05-27 16:48, phil(a)highoctane.be wrote: > There is sample for an alternative technique (the one between "save the > full image" and "sandstone". > > I kind of ported the example for my own use by using Fuel based saves. > > http://www.smalltalkhub.com/#!/~philippeback/DripfeedIt/packages/DripfeedIt… @Phil: The site says "Page does not exist" which is weird. > You may need the DripfeedIt-Domain package as well as it contains the > domain objects (basic objects mind you). > > > On Mon, May 27, 2013 at 1:58 PM, Sven Van Caekenberghe <sven(a)stfx.eu > <mailto:sven@stfx.eu>> wrote: > > Hi, > > That is because `DataStream' and `SmartRefStream' are old > serialisation technologies. > There is a port of SandstoneDB using Fuel (and FileSystem), AFAIK. > Look at the specific versions on SqueakSource. > I can see that the original author made commits as well, which is > very good. @Sven: Thanks for the explanation. I tried the "Fuel" approach using these instructions[1] but there were errors during compilation. Pharo complained about `SDFileStore' not existing in the image and was unable to compile `SDFuelSerializer'. > There is also http://smalltalkhub.com/#!/~gnaritas/SandstoneDb but I > don't know how it is related. > > Sven > > On 27 May 2013, at 13:46, Bahman Movaqar <Bahman(a)BahmanM.com> wrote: > > > What is the correct way to install `SandstoneDb' in Pharo 2.0? > With the > > approach Pharo book takes[1], Pharo complains about two other packages > > to be installed as well: `DataStream' and `SmartRefStream'. > > > > TIA, > > > > [1] http://book.pharo-project.org/book/PharoTools/SandstoneDB [1] http://marianopeck.wordpress.com/2011/08/19/boosting-sandstonedb-with-fuel/ -- Bahman Movaqar (http://BahmanM.com) ERP Evaluation, Implementation, Deployment Consultant

May 27, 2013

Re: [Pharo-users] How to install SandstoneDb

by phil＠highoctane.be

There is sample for an alternative technique (the one between "save the full image" and "sandstone". I kind of ported the example for my own use by using Fuel based saves. http://www.smalltalkhub.com/#!/~philippeback/DripfeedIt/packages/DripfeedIt… You may need the DripfeedIt-Domain package as well as it contains the domain objects (basic objects mind you). Phil On Mon, May 27, 2013 at 1:58 PM, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: > Hi, > > That is because `DataStream' and `SmartRefStream' are old serialisation > technologies. > There is a port of SandstoneDB using Fuel (and FileSystem), AFAIK. > Look at the specific versions on SqueakSource. > I can see that the original author made commits as well, which is very > good. > > There is also http://smalltalkhub.com/#!/~gnaritas/SandstoneDb but I > don't know how it is related. > > Sven > > On 27 May 2013, at 13:46, Bahman Movaqar <Bahman(a)BahmanM.com> wrote: > > > What is the correct way to install `SandstoneDb' in Pharo 2.0? With the > > approach Pharo book takes[1], Pharo complains about two other packages > > to be installed as well: `DataStream' and `SmartRefStream'. > > > > TIA, > > > > [1] http://book.pharo-project.org/book/PharoTools/SandstoneDB > > -- > > Bahman Movaqar (http://BahmanM.com) > > ERP Evaluation, Implementation, Deployment Consultant > > > -- > Sven Van Caekenberghe > Proudly supporting Pharo > http://pharo.org > http://association.pharo.org > http://consortium.pharo.org > > > > > > >

May 27, 2013

Re: [Pharo-users] How to install SandstoneDb

by Sven Van Caekenberghe

Hi, That is because `DataStream' and `SmartRefStream' are old serialisation technologies. There is a port of SandstoneDB using Fuel (and FileSystem), AFAIK. Look at the specific versions on SqueakSource. I can see that the original author made commits as well, which is very good. There is also http://smalltalkhub.com/#!/~gnaritas/SandstoneDb but I don't know how it is related. Sven On 27 May 2013, at 13:46, Bahman Movaqar <Bahman(a)BahmanM.com> wrote: > What is the correct way to install `SandstoneDb' in Pharo 2.0? With the > approach Pharo book takes[1], Pharo complains about two other packages > to be installed as well: `DataStream' and `SmartRefStream'. > > TIA, > > [1] http://book.pharo-project.org/book/PharoTools/SandstoneDB > -- > Bahman Movaqar (http://BahmanM.com) > ERP Evaluation, Implementation, Deployment Consultant -- Sven Van Caekenberghe Proudly supporting Pharo http://pharo.org http://association.pharo.org http://consortium.pharo.org

May 27, 2013

How to install SandstoneDb

by Bahman Movaqar

What is the correct way to install `SandstoneDb' in Pharo 2.0? With the approach Pharo book takes[1], Pharo complains about two other packages to be installed as well: `DataStream' and `SmartRefStream'. TIA, [1] http://book.pharo-project.org/book/PharoTools/SandstoneDB -- Bahman Movaqar (http://BahmanM.com) ERP Evaluation, Implementation, Deployment Consultant

May 27, 2013

Re: [Pharo-users] ORM with PostgreSQL support

by Sven Van Caekenberghe

http://dbxtalk.smallworks.com.ar On 27 May 2013, at 11:08, "phil(a)highoctane.be" <phil(a)highoctane.be> wrote: > http://book.pharo-project.org/book/PharoTools/Glorp/ > > > On Mon, May 27, 2013 at 10:44 AM, Bahman Movaqar <Bahman(a)bahmanm.com> wrote: > Hi all, > > I'm completely new to Smalltalk world so please bear with me. > > Coming from the Java world, I'm used to using an ORM when developing a > database-backed application. What are the options in the Smalltalk > world? I'm specially looking for something that supports PostgreSQL as > that's what I 99.99% of the time use :-) > > Would you please give me some pointers along with links to the > documentations? > > TIA, > > -- > Bahman Movaqar (http://BahmanM.com) > ERP Evaluation, Implementation, Deployment Consultant > > >

May 27, 2013

Re: [Pharo-users] ORM with PostgreSQL support

by phil＠highoctane.be

In fact, check http://www.slideshare.net/esug/dbxtalk and http://rmod.lille.inria.fr/archives/events/2012PharoConf/Slides/2012-PharoC… Phil On Mon, May 27, 2013 at 10:44 AM, Bahman Movaqar <Bahman(a)bahmanm.com> wrote: > Hi all, > > I'm completely new to Smalltalk world so please bear with me. > > Coming from the Java world, I'm used to using an ORM when developing a > database-backed application. What are the options in the Smalltalk > world? I'm specially looking for something that supports PostgreSQL as > that's what I 99.99% of the time use :-) > > Would you please give me some pointers along with links to the > documentations? > > TIA, > > -- > Bahman Movaqar (http://BahmanM.com) > ERP Evaluation, Implementation, Deployment Consultant > > >

May 27, 2013

Re: [Pharo-users] ORM with PostgreSQL support

by phil＠highoctane.be

http://book.pharo-project.org/book/PharoTools/Glorp/ On Mon, May 27, 2013 at 10:44 AM, Bahman Movaqar <Bahman(a)bahmanm.com> wrote: > Hi all, > > I'm completely new to Smalltalk world so please bear with me. > > Coming from the Java world, I'm used to using an ORM when developing a > database-backed application. What are the options in the Smalltalk > world? I'm specially looking for something that supports PostgreSQL as > that's what I 99.99% of the time use :-) > > Would you please give me some pointers along with links to the > documentations? > > TIA, > > -- > Bahman Movaqar (http://BahmanM.com) > ERP Evaluation, Implementation, Deployment Consultant > > >

May 27, 2013

ORM with PostgreSQL support

by Bahman Movaqar

Hi all, I'm completely new to Smalltalk world so please bear with me. Coming from the Java world, I'm used to using an ORM when developing a database-backed application. What are the options in the Smalltalk world? I'm specially looking for something that supports PostgreSQL as that's what I 99.99% of the time use :-) Would you please give me some pointers along with links to the documentations? TIA, -- Bahman Movaqar (http://BahmanM.com) ERP Evaluation, Implementation, Deployment Consultant

May 27, 2013

Video: The Moose Roadmap

by Stephan Eggermont

Another video from the MooseDay2013 Tudor Girba showing the Moose roadmap http://www.youtube.com/watch?v=2JCDS3OVnGM Stephan

May 23, 2013