- Pharo-users - lists.pharo.org

Re: [Pharo-users] New win32 VM available (was: More than 500MB for windows)

by Camillo Bruni

On 2013-07-15, at 15:35, Damien Cassou <damien.cassou(a)gmail.com> wrote: > On Mon, Jul 15, 2013 at 3:27 PM, Tudor Girba <tudor(a)tudorgirba.com> wrote: >> Ok, I admit. I should read emails thoroughly :). Please ignore the second >> issue. Still, why is it called PharoS? > > > may it be because this is a StackVM and not Cog? StackVM renameAs: #PharoS And you might interpret it in two ways: Pharo+Stack, Pharo+Slow ;)

July 15, 2013

Re: [Pharo-users] New win32 VM available (was: More than 500MB for windows)

by Damien Cassou

On Mon, Jul 15, 2013 at 3:27 PM, Tudor Girba <tudor(a)tudorgirba.com> wrote: > Ok, I admit. I should read emails thoroughly :). Please ignore the second > issue. Still, why is it called PharoS? may it be because this is a StackVM and not Cog? -- Damien Cassou http://damiencassou.seasidehosting.st "Success is the ability to go from one failure to another without losing enthusiasm." Winston Churchill

July 15, 2013

Re: [Pharo-users] New win32 VM available (was: More than 500MB for windows)

by Tudor Girba

Ok, I admit. I should read emails thoroughly :). Please ignore the second issue. Still, why is it called PharoS? Doru On Mon, Jul 15, 2013 at 3:14 PM, Tudor Girba <tudor(a)tudorgirba.com> wrote: > I am trying the vm now, and I have a couple of issues: > - Why is the executable named PharoS instead of Pharo? > - There is no .ini file in the archive. In the older one, I have the > following contents in the Pharo.ini: > [Global] > DeferUpdate=1 > ShowConsole=0 > DynamicConsole=1 > ReduceCPUUsage=1 > ReduceCPUInBackground=0 > 3ButtonMouse=0 > 1ButtonMouse=0 > UseDirectSound=1 > PriorityBoost=1 > B3DXUsesOpenGL=0 > CaseSensitiveFileMode=0 > > Do I still need these? > > > Doru > > > On Thu, Jul 11, 2013 at 4:07 PM, Igor Stasenko <siguctua(a)gmail.com> wrote: > >> So, after spending unproportionally huge time (2days) dealing with >> jenkins config idiosyncrasies, >> it finally managed to build it. >> >> http://files.pharo.org/vm/pharo/win/latest.zip >> >> This VM should react properly on >> AddressSpaceLimit=<number of MBytes> >> setting in .ini file. >> The ini file is located in same directory as VM executable. >> If it doesn't exists, you can run VM once and it will create it >> automatically. >> >> Thanks for patience. >> >> -- >> Best regards, >> Igor Stasenko. >> >> > > > -- > www.tudorgirba.com > > "Every thing has its own flow" > -- www.tudorgirba.com "Every thing has its own flow"

July 15, 2013

Re: [Pharo-users] Problem with saving in repository

by ÐÐ°ÑÐºÑÑÐ½ Ð ÑÐ·ÑÐ½

Thank you guys. 2013/7/15 Yuriy Tymchuk <yuriy.tymchuk(a)me.com> > So, yeah. You should enter user and password. You can do this by > right-clicking a repository end selecting edit. > > Uko > > > > On 15 Ð»Ð¸Ð¿. 2013, at 16:05, ÐÐ°ÑÐºÑÑÐ½ Ð ÑÐ·ÑÐ½ <mrizun(a)gmail.com> wrote: > > Version 2.0 > Repository: > MCHttpRepository > location: 'http://smalltalkhub.com/mc/MarkRizun/LaserGame/main' > user: '' > password: '' > > > > 2013/7/15 Yuriy Tymchuk <yuriy.tymchuk(a)me.com> > >> Hi. >> >> Looks like the problem is with authentication (according to 403 error). >> Maybe you have forgotten to enter credentials, or just made a mistake? >> >> Uko >> >> On 15 Ð»Ð¸Ð¿. 2013, at 15:48, ÐÐ°ÑÐºÑÑÐ½ Ð ÑÐ·ÑÐ½ <mrizun(a)gmail.com> wrote: >> >> Hi guys, >> When I'm trying to save my code in repository it failes and gives me >> error. >> Am I doing something wrong? >> <error.jpg> >> >> >> > >

July 15, 2013

Re: [Pharo-users] New win32 VM available (was: More than 500MB for windows)

by Tudor Girba

I am trying the vm now, and I have a couple of issues: - Why is the executable named PharoS instead of Pharo? - There is no .ini file in the archive. In the older one, I have the following contents in the Pharo.ini: [Global] DeferUpdate=1 ShowConsole=0 DynamicConsole=1 ReduceCPUUsage=1 ReduceCPUInBackground=0 3ButtonMouse=0 1ButtonMouse=0 UseDirectSound=1 PriorityBoost=1 B3DXUsesOpenGL=0 CaseSensitiveFileMode=0 Do I still need these? Doru On Thu, Jul 11, 2013 at 4:07 PM, Igor Stasenko <siguctua(a)gmail.com> wrote: > So, after spending unproportionally huge time (2days) dealing with > jenkins config idiosyncrasies, > it finally managed to build it. > > http://files.pharo.org/vm/pharo/win/latest.zip > > This VM should react properly on > AddressSpaceLimit=<number of MBytes> > setting in .ini file. > The ini file is located in same directory as VM executable. > If it doesn't exists, you can run VM once and it will create it > automatically. > > Thanks for patience. > > -- > Best regards, > Igor Stasenko. > > -- www.tudorgirba.com "Every thing has its own flow"

July 15, 2013

Re: [Pharo-users] Problem with saving in repository

by Tudor Girba

Add the user and password. Doru On Mon, Jul 15, 2013 at 3:05 PM, ÐÐ°ÑÐºÑÑÐ½ Ð ÑÐ·ÑÐ½ <mrizun(a)gmail.com> wrote: > Version 2.0 > Repository: > MCHttpRepository > location: 'http://smalltalkhub.com/mc/MarkRizun/LaserGame/main' > user: '' > password: '' > > > > 2013/7/15 Yuriy Tymchuk <yuriy.tymchuk(a)me.com> > >> Hi. >> >> Looks like the problem is with authentication (according to 403 error). >> Maybe you have forgotten to enter credentials, or just made a mistake? >> >> Uko >> >> On 15 Ð»Ð¸Ð¿. 2013, at 15:48, ÐÐ°ÑÐºÑÑÐ½ Ð ÑÐ·ÑÐ½ <mrizun(a)gmail.com> wrote: >> >> Hi guys, >> When I'm trying to save my code in repository it failes and gives me >> error. >> Am I doing something wrong? >> <error.jpg> >> >> >> > -- www.tudorgirba.com "Every thing has its own flow"

July 15, 2013

Re: [Pharo-users] Problem with saving in repository

by Yuriy Tymchuk

So, yeah. You should enter user and password. You can do this by right-clicking a repository end selecting edit. Uko On 15 Ð»Ð¸Ð¿. 2013, at 16:05, ÐÐ°ÑÐºÑÑÐ½ Ð ÑÐ·ÑÐ½ <mrizun(a)gmail.com> wrote: > Version 2.0 > Repository: > MCHttpRepository > location: 'http://smalltalkhub.com/mc/MarkRizun/LaserGame/main' > user: '' > password: '' > > > > 2013/7/15 Yuriy Tymchuk <yuriy.tymchuk(a)me.com> > Hi. > > Looks like the problem is with authentication (according to 403 error). Maybe you have forgotten to enter credentials, or just made a mistake? > > Uko > > On 15 Ð»Ð¸Ð¿. 2013, at 15:48, ÐÐ°ÑÐºÑÑÐ½ Ð ÑÐ·ÑÐ½ <mrizun(a)gmail.com> wrote: > >> Hi guys, >> When I'm trying to save my code in repository it failes and gives me error. >> Am I doing something wrong? >> <error.jpg> > >

July 15, 2013

Re: [Pharo-users] Problem with saving in repository

by ÐÐ°ÑÐºÑÑÐ½ Ð ÑÐ·ÑÐ½

Version 2.0 Repository: MCHttpRepository location: 'http://smalltalkhub.com/mc/MarkRizun/LaserGame/main' user: '' password: '' 2013/7/15 Yuriy Tymchuk <yuriy.tymchuk(a)me.com> > Hi. > > Looks like the problem is with authentication (according to 403 error). > Maybe you have forgotten to enter credentials, or just made a mistake? > > Uko > > On 15 Ð»Ð¸Ð¿. 2013, at 15:48, ÐÐ°ÑÐºÑÑÐ½ Ð ÑÐ·ÑÐ½ <mrizun(a)gmail.com> wrote: > > Hi guys, > When I'm trying to save my code in repository it failes and gives me error. > Am I doing something wrong? > <error.jpg> > > >

July 15, 2013

Re: [Pharo-users] Problem with saving in repository

by Yuriy Tymchuk

Hi. Looks like the problem is with authentication (according to 403 error). Maybe you have forgotten to enter credentials, or just made a mistake? Uko On 15 Ð»Ð¸Ð¿. 2013, at 15:48, ÐÐ°ÑÐºÑÑÐ½ Ð ÑÐ·ÑÐ½ <mrizun(a)gmail.com> wrote: > Hi guys, > When I'm trying to save my code in repository it failes and gives me error. > Am I doing something wrong? > <error.jpg>

July 15, 2013

Re: [Pharo-users] Problem with saving in repository

by Camillo Bruni

Hi, To answer your question we need a bit more information :) Ehich Pharo version are you using? To which repository are you saving? thanks On 2013-07-15, at 14:49, ÐÐ°ÑÐºÑÑÐ½ Ð ÑÐ·ÑÐ½ <mrizun(a)gmail.com> wrote: > Hi guys, > When I'm trying to save my code in repository it failes and gives me error. > Am I doing something wrong? > <error.jpg>

July 15, 2013