- Pharo-users - lists.pharo.org

Re: [Pharo-users] Updating packages from command line

by Sven Van Caekenberghe

The best approach is to use Configurations and the config handler: $ ./pharo Pharo.image config Command line handler for dealing with Metacello configurations from the command line Usage: config [--help] <repository url> [<configuration>] [--install[=<version>]] [--group=<group>] [--username=<username>] [--password=<password>] --help show this help message <repository url> A Monticello repository name <configuration> A valid Metacello Configuration name <version> A valid version for the given configuration <group> A valid Metacello group name <username> An optional username to access the configuration's repository <password> An optional password to access the configuration's repository Examples: # display this help message pharo Pharo.image config # list all configurations of a repository pharo Pharo.image config $MC_REPOS_URL # list all the available versions of a confgurtation pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo # install the stable version pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo --install #install a specific version '1.5' pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo --install=1.5 #install a specific version '1.5' and only a specific group 'Tests' pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo --install=1.5 --group=Tests The following article contains this approach as well: http://zn.stfx.eu/zn/build-and-deploy-1st-webapp/ http://zn.stfx.eu/zn/build-and-deploy-1st-webapp/#deployingforproduction HTH, Sven On 02 May 2014, at 13:28, Bernat Romagosa <tibabenfortlapalanca(a)gmail.com> wrote: > Is there a way to do it? > > Here's my attempt: > > pharo-vm-nox MyImage.image eval "Gofer new smalltalkhubUser: 'myUser' project: 'MyProject'; package: 'MyPackage'; load. Smalltalk snapshot: true andQuit: true" > > then: > > pharo-vm-nox MyImage.image eval --no-quit "MyJustLoadedClass start" > > results in: > > UndefinedObject>>DoIt (MyJustLoadedClass is Undeclared) > MessageNotUnderstood: receiver of "start" is nil > > Thanks! > Bernat. > > -- > Bernat Romagosa.

May 2, 2014

Re: [Pharo-users] SOAP in Pharo

by Thushar G R

Hi, XMLRPC may not be enough. I have tried some of the request using the XMLRPC and it works but i am not sure if its enough for managing all the requests. I am trying to connect to a magento site. and their recommended approach is unfortunately soap. SoapOpera updating is a possibility it seems, am i right? Also any paid paid solution is not practical for us at the momment. Also i hope the SoapOpera is latest at squeakSource and that it was last updated in 2010. thanks for the replies Thushar *G R Thushar* *Team Leader(Technology),* *Signos Software Solutions Pvt. Ltd.* *Ground Floor **A.R Plaza, TC 11/43 (2),* *P.M.G Junction,* *Thiruvananthapuram, 695004. Kerala, India.* *Web: www.signossolutions.com <http://www.signossolutions.com>* Email: thushar.gr(a)signossolutions.com, thushar.gr(a)gmail.com Phone: +919846577772 On Fri, May 2, 2014 at 5:03 PM, phil(a)highoctane.be <phil(a)highoctane.be>wrote: > Pharo lacks a SOAP stack. > > This is something that also limits it in environments where a ton of APIs > are in SOAP format. E.g. Banks, Insurance, Media, Government (including > European Institutions). > For SaaS apps, who cares. > > Java and .NET have full stacks and that's a significant factor for their > use. > VisualWorks support those: as in: > > http://www.cincomsmalltalk.com/main/products/visualworks/ > > - *Major improvements to WSDL 2.0 / SOAP 1.2 to handle updated > protocols.* > > FWIW, my approach is to have a Java endpoint that will pass stuff back and > forth through RabbitMQ or whatever middleware. > > When you get into SOAP over JMS, with JMS being WebsphereMQ for example, > well, things get complicated, especially when you factor in certificates. > And sometimes you need compliance and certification. > > IBM has a product to help solve those things: > http://www-03.ibm.com/software/products/en/datapower. > I led a team that used it extensively for a couple of months. It works > well. The price tag is quite hard to swallow for little systems and > companies. > > <featurelist> > > "The IBMÂ® WebSphereÂ® DataPowerÂ® Service Gateway XG45 appliance helps you > secure and govern web traffic more effectively. It provides an advanced > data threat reduction and security enforcement layer for web and > on-premises applications, while giving you the flexibility to deploy new > applications rapidly. > > The IBM WebSphere DataPower Service Gateway XG45 appliance helps you: > > - Strengthen compliance using robust data protection, policy > enforcement and auditing capabilities > - Gain âfront-line defenseâ for inbound and outbound traffic through a > web 2.0 gateway. > - Separate security concerns from application code with an optional > hardware security module (HSM) that is certified for FIPS 140-2 Level 3. > - Integrate applications for improved application and database > connectivity." > > </featurelist> > > If you have something around, you can bridge SOAP to whatever, including > REST. The new versions do support JSON etc as well. > > > Phil > > > > On Fri, May 2, 2014 at 12:26 PM, S Krish < > krishnamachari.sudhakar(a)gmail.com> wrote: > >> Are you looking for a SOAP client for RPC style calls or document format. >> >> For the former adding a simple SOAP Envelope to the request and using >> ZnClient should work fairly well. >> >> But if you are looking for something like : >> http://www.soapclient.com/soaptest.html to be used against a declared >> WSDL.. I doubt if any exists. >> >> Look at the XMLRPC package and see if you can work from there.. if you >> need to adapt something.. >> >> >> On Fri, May 2, 2014 at 3:29 PM, Thushar G R <thushar.gr(a)gmail.com> wrote: >> >>> Hi, >>> >>> Do we have a SOAP client in pharo? I checked SoapOpera but seems its too >>> old to work with latest pharo 2.0. >>> >>> Thanks, >>> >>> >> >

May 2, 2014

Re: [Pharo-users] Updating packages from command line

by GOUBIER Thierry

What I use is eval --save: pharo-vm-nox MyImage.image eval --save "Gofer new smalltalkhubUser: 'myUser' project: 'MyProject'; package: 'MyPackage'; load Thierry ________________________________ De : Pharo-users [pharo-users-bounces(a)lists.pharo.org] de la part de Bernat Romagosa [tibabenfortlapalanca(a)gmail.com] EnvoyÃ© : vendredi 2 mai 2014 13:28 Ã : Any question about pharo is welcome Objet : [Pharo-users] Updating packages from command line Is there a way to do it? Here's my attempt: pharo-vm-nox MyImage.image eval "Gofer new smalltalkhubUser: 'myUser' project: 'MyProject'; package: 'MyPackage'; load. Smalltalk snapshot: true andQuit: true" then: pharo-vm-nox MyImage.image eval --no-quit "MyJustLoadedClass start" results in: UndefinedObject>>DoIt (MyJustLoadedClass is Undeclared) MessageNotUnderstood: receiver of "start" is nil Thanks! Bernat. -- Bernat Romagosa.

May 2, 2014

Re: [Pharo-users] SOAP in Pharo

by phil＠highoctane.be

Pharo lacks a SOAP stack. This is something that also limits it in environments where a ton of APIs are in SOAP format. E.g. Banks, Insurance, Media, Government (including European Institutions). For SaaS apps, who cares. Java and .NET have full stacks and that's a significant factor for their use. VisualWorks support those: as in: http://www.cincomsmalltalk.com/main/products/visualworks/ - *Major improvements to WSDL 2.0 / SOAP 1.2 to handle updated protocols.* FWIW, my approach is to have a Java endpoint that will pass stuff back and forth through RabbitMQ or whatever middleware. When you get into SOAP over JMS, with JMS being WebsphereMQ for example, well, things get complicated, especially when you factor in certificates. And sometimes you need compliance and certification. IBM has a product to help solve those things: http://www-03.ibm.com/software/products/en/datapower. I led a team that used it extensively for a couple of months. It works well. The price tag is quite hard to swallow for little systems and companies. <featurelist> "The IBMÂ® WebSphereÂ® DataPowerÂ® Service Gateway XG45 appliance helps you secure and govern web traffic more effectively. It provides an advanced data threat reduction and security enforcement layer for web and on-premises applications, while giving you the flexibility to deploy new applications rapidly. The IBM WebSphere DataPower Service Gateway XG45 appliance helps you: - Strengthen compliance using robust data protection, policy enforcement and auditing capabilities - Gain âfront-line defenseâ for inbound and outbound traffic through a web 2.0 gateway. - Separate security concerns from application code with an optional hardware security module (HSM) that is certified for FIPS 140-2 Level 3. - Integrate applications for improved application and database connectivity." </featurelist> If you have something around, you can bridge SOAP to whatever, including REST. The new versions do support JSON etc as well. Phil On Fri, May 2, 2014 at 12:26 PM, S Krish <krishnamachari.sudhakar(a)gmail.com>wrote: > Are you looking for a SOAP client for RPC style calls or document format. > > For the former adding a simple SOAP Envelope to the request and using > ZnClient should work fairly well. > > But if you are looking for something like : > http://www.soapclient.com/soaptest.html to be used against a declared > WSDL.. I doubt if any exists. > > Look at the XMLRPC package and see if you can work from there.. if you > need to adapt something.. > > > On Fri, May 2, 2014 at 3:29 PM, Thushar G R <thushar.gr(a)gmail.com> wrote: > >> Hi, >> >> Do we have a SOAP client in pharo? I checked SoapOpera but seems its too >> old to work with latest pharo 2.0. >> >> Thanks, >> >> >

May 2, 2014

Updating packages from command line

by Bernat Romagosa

Is there a way to do it? Here's my attempt: *pharo-vm-nox MyImage.image eval "Gofer new smalltalkhubUser: 'myUser' project: 'MyProject'; package: 'MyPackage'; load. Smalltalk snapshot: true andQuit: true"* then: *pharo-vm-nox MyImage.image eval --no-quit "MyJustLoadedClass start"* results in: *UndefinedObject>>DoIt (MyJustLoadedClass is Undeclared) * *MessageNotUnderstood: receiver of "start" is nil* Thanks! Bernat. -- Bernat Romagosa.

May 2, 2014

Re: [Pharo-users] SOAP in Pharo

by S Krish

Are you looking for a SOAP client for RPC style calls or document format. For the former adding a simple SOAP Envelope to the request and using ZnClient should work fairly well. But if you are looking for something like : http://www.soapclient.com/soaptest.html to be used against a declared WSDL.. I doubt if any exists. Look at the XMLRPC package and see if you can work from there.. if you need to adapt something.. On Fri, May 2, 2014 at 3:29 PM, Thushar G R <thushar.gr(a)gmail.com> wrote: > Hi, > > Do we have a SOAP client in pharo? I checked SoapOpera but seems its too > old to work with latest pharo 2.0. > > Thanks, > >

May 2, 2014

Re: [Pharo-users] SOAP in Pharo

by Stephan Eggermont

AFAIK, SOAP is completely dead for interoperability, as all major players decided to use their own extensions, and change them with each new release. You can of course make something work with your exact situation. Stephan

May 2, 2014

Re: [Pharo-users] pharo-vm-nox command line

by Bernat Romagosa

Cool, working now. Thanks Sven! :) 2014-05-02 12:15 GMT+02:00 Sven Van Caekenberghe <sven(a)stfx.eu>: > Try > > $ ./pharo Pharo.image printVersion > [version] 3.0 #30845 > > $ ./pharo Pharo.image eval --no-quit '42 factorial' > 1405006117752879898543142606244511569936384000000000 > > it keeps the image running after printing the result of the expression. > > On 02 May 2014, at 11:56, Bernat Romagosa <tibabenfortlapalanca(a)gmail.com> > wrote: > > > Hi list, > > > > Is there a way to issue commands to an image via pharo-vm-nox on a > headless server and not have it stop immediately after running them? > > > > > > This keeps the image running, but the command is not sent to it: > > > > pharo-vm-nox StarUOCs.image --no-quit eval "Transcript show: 'hi'" > > > > This is working, but the image quits after the command is run: > > > > pharo-vm-nox StarUOCs.image eval "Transcript show: 'hi'" > > > > > > Thanks! > > Bernat. > > > > -- > > Bernat Romagosa. > > > -- Bernat Romagosa.

May 2, 2014

Re: [Pharo-users] pharo-vm-nox command line

by Sven Van Caekenberghe

Try $ ./pharo Pharo.image printVersion [version] 3.0 #30845 $ ./pharo Pharo.image eval --no-quit '42 factorial' 1405006117752879898543142606244511569936384000000000 it keeps the image running after printing the result of the expression. On 02 May 2014, at 11:56, Bernat Romagosa <tibabenfortlapalanca(a)gmail.com> wrote: > Hi list, > > Is there a way to issue commands to an image via pharo-vm-nox on a headless server and not have it stop immediately after running them? > > > This keeps the image running, but the command is not sent to it: > > pharo-vm-nox StarUOCs.image --no-quit eval "Transcript show: 'hi'" > > This is working, but the image quits after the command is run: > > pharo-vm-nox StarUOCs.image eval "Transcript show: 'hi'" > > > Thanks! > Bernat. > > -- > Bernat Romagosa.

May 2, 2014

SOAP in Pharo

by Thushar G R

Hi, Do we have a SOAP client in pharo? I checked SoapOpera but seems its too old to work with latest pharo 2.0. Thanks,

May 2, 2014