- Pharo-users - lists.pharo.org

[ANN] iStoa 14.05 for Linux

by Hilaire Fernandes

Hello, Here is the release 14.05. It is the one I showed screen shot previously[1]. https://launchpad.net/istoa/+milestone/14.05 Thanks Hilaire [1] http://forum.world.st/iStoa-some-news-tt4756694.html -- Dr. Geo http://drgeo.eu

May 3, 2014

Re: [Pharo-users] Continuous integration for Configurations and Base Image

by Esteban Lorenzano

I think the build process as it is now should work out of the box. check the jobs under https://ci.inria.fr/pharo/view/3.0-VM/ specially: https://ci.inria.fr/pharo/view/3.0-VM/job/Cog-Git-Tracker/ https://ci.inria.fr/pharo/view/3.0-VM/job/PharoVM/ btwâ¦ next weeks Iâve been adding some other slaves to vm build process, to enlarge our base support. Old glibc systems are also in my list. Esteban On 03 May 2014, at 14:01, phil(a)highoctane.be wrote: > Hello, > > I'd like to put a CI server in place (Jenkins on Linux [Centos6.4]) and wondered if there were ressources that I could reuse from the Pharo CI work. > > I've got to: > > * build a 32 bit VM on CentOS6.4 (which works by hand) > * Take a fresh 30 image > * Load all my configurations and additional packages > * Run tests > > Thanks for the pointers. > > Phil > >

May 3, 2014

Continuous integration for Configurations and Base Image

by phil＠highoctane.be

Hello, I'd like to put a CI server in place (Jenkins on Linux [Centos6.4]) and wondered if there were ressources that I could reuse from the Pharo CI work. I've got to: * build a 32 bit VM on CentOS6.4 (which works by hand) * Take a fresh 30 image * Load all my configurations and additional packages * Run tests Thanks for the pointers. Phil

May 3, 2014

Re: [Pharo-users] Pharo 3 minor issue

by Sven Van Caekenberghe

That is apparently a Spec problem (i.e. all buttons created with Spec react like this): ButtonModel new label: 'Right-click Me'; action: [ self inform: 'Clicked !' ]; openWithSpec CC'ing to Pharo dev. We probably have to turn this into an bug tracker issue. Thanks for reporting. On 03 May 2014, at 03:11, S. Garth Holland <steve9571952(a)hotmail.com> wrote: > Hi, started looking a Pharo again. I was going to load Iliad from the Configuration browser. The window has two buttons: "Install Stable Configuration" and "Load Configuration". I was not sure why I would want to just load the configuration. This link provided some insight https://www.youtube.com/watch?v=se21CH4BfyE&feature=youtu.be > > I did try right clicking on the buttons to get some guidance but that gave me a walkback. > > TIA, Garth > > > BTW, I strongly recommend short well titled screen-casts as a precursor to real documentation. > > > Date: Thu, 1 May 2014 10:28:35 +0200 > From: giorgio.ferraris(a)gmail.com > To: pharo-users(a)lists.pharo.org > CC: pharo-dev(a)lists.pharo.org > Subject: Re: [Pharo-users] Pharo 3 minor issue > > it usually happens that way. You test everything and miss something obvious... > > ciao > > giorgio > > > On Thu, May 1, 2014 at 9:24 AM, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: > thanks for reporting, I will look at it (super weird that it did not arise before :( ) > > Esteban > > On 30 Apr 2014, at 20:54, giorgio ferraris <giorgio.ferraris(a)gmail.com> wrote: > > > Hi, > > > > started looking at Pharo after many years. > > First of all, you all did an awesome works, thank you! > > There is a small problems on System Browser > > open image > > open system browser > > choose one class > > select group > > The class side checkbox is enabled, if you check it, you get a wall bak . > > Giorgio > > > > <Screen Shot 2014-04-30 at 20.42.03.jpg> > > > > <PharoScreenshot.png>

May 3, 2014

Re: [Pharo-users] [ANN] Pharo3 Dark Theme is available

by Pablo Herrero

Awesome!, I made it my default theme. 2014-05-02 19:53 GMT-03:00 Esteban A. Maringolo <emaringolo(a)gmail.com>: > I'm loving it! > > Thank you Esteban! > Esteban A. Maringolo > > > 2014-05-02 5:05 GMT-03:00 kmo <voxkmp(a)gmail.com>: >> >> /So, will we start the longtime postponed effort of effectively replace >> current Morphic?/ >> >> If it breaks the current one window restriction then please please yes. >> >> >> >> -- >> View this message in context: http://forum.world.st/ANN-Pharo3-Dark-Theme-is-available-tp4757420p4757549.… >> Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. >> >

May 3, 2014

Re: [Pharo-users] Pharo 3 minor issue

by S. Garth Holland

Hi, started looking a Pharo again. I was going to load Iliad from the Configuration browser. The window has two buttons: "Install Stable Configuration" and "Load Configuration". I was not sure why I would want to just load the configuration. This link provided some insight https://www.youtube.com/watch?v=se21CH4BfyE&feature=youtu.be I did try right clicking on the buttons to get some guidance but that gave me a walkback. TIA, Garth BTW, I strongly recommend short well titled screen-casts as a precursor to real documentation. Date: Thu, 1 May 2014 10:28:35 +0200 From: giorgio.ferraris(a)gmail.com To: pharo-users(a)lists.pharo.org CC: pharo-dev(a)lists.pharo.org Subject: Re: [Pharo-users] Pharo 3 minor issue it usually happens that way. You test everything and miss something obvious... ciao giorgio On Thu, May 1, 2014 at 9:24 AM, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: thanks for reporting, I will look at it (super weird that it did not arise before :( ) Esteban On 30 Apr 2014, at 20:54, giorgio ferraris <giorgio.ferraris(a)gmail.com> wrote: > Hi, > > started looking at Pharo after many years. > First of all, you all did an awesome works, thank you! > There is a small problems on System Browser > open image > open system browser > choose one class > select group > The class side checkbox is enabled, if you check it, you get a wall bak . > Giorgio > > <Screen Shot 2014-04-30 at 20.42.03.jpg>

May 3, 2014

Re: [Pharo-users] [ANN] Pharo3 Dark Theme is available

by Esteban A. Maringolo

I'm loving it! Thank you Esteban! Esteban A. Maringolo 2014-05-02 5:05 GMT-03:00 kmo <voxkmp(a)gmail.com>: > > /So, will we start the longtime postponed effort of effectively replace > current Morphic?/ > > If it breaks the current one window restriction then please please yes. > > > > -- > View this message in context: http://forum.world.st/ANN-Pharo3-Dark-Theme-is-available-tp4757420p4757549.… > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. >

May 2, 2014

Re: [Pharo-users] Updating packages from command line

by Bernat Romagosa

Hi Thierry, I did so, and loaded the package the way you suggested. It worked alright :) I guess my configuration is not well formed, I'll do it over. Thanks! 2014-05-02 15:56 GMT+02:00 GOUBIER Thierry <thierry.goubier(a)cea.fr>: > Bernat, > > if I encounter something like that, I would also erase the contents of my > package-cache directory. Sometimes it seems I never manage to activate > changes because it keeps on loading a package of the same name and number > out of the cache instead. > > Thierry > > > ------------------------------ > *De :* Pharo-users [pharo-users-bounces(a)lists.pharo.org] de la part de > Bernat Romagosa [tibabenfortlapalanca(a)gmail.com] > *EnvoyÃ© :* vendredi 2 mai 2014 15:39 > > *Ã :* Any question about pharo is welcome > *Objet :* Re: [Pharo-users] Updating packages from command line > > I started over from scratch, filed out and in the config and package, > erased all packages in the repo, pushed them back and still no success. > > I think I'll manually scp the image file for now... :P > > Thanks guys! > > > 2014-05-02 15:21 GMT+02:00 Bernat Romagosa <tibabenfortlapalanca(a)gmail.com > >: > >> Indeed something's broken... I used the versionner tool to build it, but >> I think something went wrong. >> >> >> http://smalltalkhub.com/#!/~bromagosa/StarUOCs/versions/ConfigurationOfStar… >> >> Try to download the mcz, it fails. >> >> I don't understand why MC added (2) to the file name. >> >> >> >> >> 2014-05-02 15:13 GMT+02:00 Sven Van Caekenberghe <sven(a)stfx.eu>: >> >> I think something must be broken with his configuration, you cannot even >>> list it... >>> >>> On 02 May 2014, at 15:11, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: >>> >>> > pharo-vm-nox Pharo.image config >>> http://smalltalkhub.com/mc/bromagosa/StarUOCs/main ConfigurationOfStarUOCs âinstall=development >>> > >>> > has to work. All out infrastructure is based on that :) >>> > >>> > Esteban >>> > >>> > On 02 May 2014, at 15:05, Bernat Romagosa < >>> tibabenfortlapalanca(a)gmail.com> wrote: >>> > >>> >> Hmm it doesn't seem to work... >>> >> >>> >> pharo-vm-nox Pharo.image config >>> http://smalltalkhub.com/mc/bromagosa/StarUOCs/main >>> >> KeyNotFound: key #ConfigurationOfStarUOCs not found in >>> SystemDictionary >>> >> >>> >> But the config is there and I can load it from the GUI by doing: >>> >> >>> >> >>> >> Gofer new >>> >> smalltalkhubUser: 'bromagosa' project: 'StarUOCs'; >>> >> package: 'ConfigurationOfStarUOCs'; >>> >> load. >>> >> >>> >> ConfigurationOfStarUOCs load. >>> >> >>> >> What can be happening? My version is: >>> >> >>> >> pharo-vm-nox Pharo.image printVersion >>> >> [version] 3.0 #30846 >>> >> >>> >> >>> >> >>> >> 2014-05-02 13:51 GMT+02:00 Bernat Romagosa < >>> tibabenfortlapalanca(a)gmail.com>: >>> >> I see, thanks a lot! :) >>> >> >>> >> >>> >> 2014-05-02 13:45 GMT+02:00 Sven Van Caekenberghe <sven(a)stfx.eu>: >>> >> >>> >> The best approach is to use Configurations and the config handler: >>> >> >>> >> $ ./pharo Pharo.image config >>> >> Command line handler for dealing with Metacello configurations from >>> the command line >>> >> >>> >> Usage: config [--help] <repository url> [<configuration>] >>> [--install[=<version>]] [--group=<group>] [--username=<username>] >>> [--password=<password>] >>> >> --help show this help message >>> >> <repository url> A Monticello repository name >>> >> <configuration> A valid Metacello Configuration name >>> >> <version> A valid version for the given configuration >>> >> <group> A valid Metacello group name >>> >> <username> An optional username to access the >>> configuration's repository >>> >> <password> An optional password to access the >>> configuration's repository >>> >> >>> >> Examples: >>> >> # display this help message >>> >> pharo Pharo.image config >>> >> >>> >> # list all configurations of a repository >>> >> pharo Pharo.image config $MC_REPOS_URL >>> >> >>> >> # list all the available versions of a confgurtation >>> >> pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo >>> >> >>> >> # install the stable version >>> >> pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo >>> --install >>> >> >>> >> #install a specific version '1.5' >>> >> pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo >>> --install=1.5 >>> >> >>> >> #install a specific version '1.5' and only a specific group >>> 'Tests' >>> >> pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo >>> --install=1.5 --group=Tests >>> >> >>> >> The following article contains this approach as well: >>> >> >>> >> http://zn.stfx.eu/zn/build-and-deploy-1st-webapp/ >>> >> >>> >> >>> http://zn.stfx.eu/zn/build-and-deploy-1st-webapp/#deployingforproduction >>> >> >>> >> HTH, >>> >> >>> >> Sven >>> >> >>> >> On 02 May 2014, at 13:28, Bernat Romagosa < >>> tibabenfortlapalanca(a)gmail.com> wrote: >>> >> >>> >>> Is there a way to do it? >>> >>> >>> >>> Here's my attempt: >>> >>> >>> >>> pharo-vm-nox MyImage.image eval "Gofer new smalltalkhubUser: >>> 'myUser' project: 'MyProject'; package: 'MyPackage'; load. Smalltalk >>> snapshot: true andQuit: true" >>> >>> >>> >>> then: >>> >>> >>> >>> pharo-vm-nox MyImage.image eval --no-quit "MyJustLoadedClass start" >>> >>> >>> >>> results in: >>> >>> >>> >>> UndefinedObject>>DoIt (MyJustLoadedClass is Undeclared) >>> >>> MessageNotUnderstood: receiver of "start" is nil >>> >>> >>> >>> Thanks! >>> >>> Bernat. >>> >>> >>> >>> -- >>> >>> Bernat Romagosa. >>> >> >>> >> >>> >> >>> >> >>> >> >>> >> -- >>> >> Bernat Romagosa. >>> >> >>> >> >>> >> >>> >> -- >>> >> Bernat Romagosa. >>> > >>> > >>> >>> >>> >> >> >> -- >> Bernat Romagosa. >> > > > > -- > Bernat Romagosa. > -- Bernat Romagosa.

May 2, 2014

Re: [Pharo-users] Updating packages from command line

by GOUBIER Thierry

Bernat, if I encounter something like that, I would also erase the contents of my package-cache directory. Sometimes it seems I never manage to activate changes because it keeps on loading a package of the same name and number out of the cache instead. Thierry ________________________________ De : Pharo-users [pharo-users-bounces(a)lists.pharo.org] de la part de Bernat Romagosa [tibabenfortlapalanca(a)gmail.com] EnvoyÃ© : vendredi 2 mai 2014 15:39 Ã : Any question about pharo is welcome Objet : Re: [Pharo-users] Updating packages from command line I started over from scratch, filed out and in the config and package, erased all packages in the repo, pushed them back and still no success. I think I'll manually scp the image file for now... :P Thanks guys! 2014-05-02 15:21 GMT+02:00 Bernat Romagosa <tibabenfortlapalanca(a)gmail.com<mailto:tibabenfortlapalanca@gmail.com>>: Indeed something's broken... I used the versionner tool to build it, but I think something went wrong. http://smalltalkhub.com/#!/~bromagosa/StarUOCs/versions/ConfigurationOfStar… Try to download the mcz, it fails. I don't understand why MC added (2) to the file name. 2014-05-02 15:13 GMT+02:00 Sven Van Caekenberghe <sven(a)stfx.eu<mailto:sven@stfx.eu>>: I think something must be broken with his configuration, you cannot even list it... On 02 May 2014, at 15:11, Esteban Lorenzano <estebanlm(a)gmail.com<mailto:estebanlm@gmail.com>> wrote: > pharo-vm-nox Pharo.image config http://smalltalkhub.com/mc/bromagosa/StarUOCs/main ConfigurationOfStarUOCs âinstall=development > > has to work. All out infrastructure is based on that :) > > Esteban > > On 02 May 2014, at 15:05, Bernat Romagosa <tibabenfortlapalanca(a)gmail.com<mailto:tibabenfortlapalanca@gmail.com>> wrote: > >> Hmm it doesn't seem to work... >> >> pharo-vm-nox Pharo.image config http://smalltalkhub.com/mc/bromagosa/StarUOCs/main >> KeyNotFound: key #ConfigurationOfStarUOCs not found in SystemDictionary >> >> But the config is there and I can load it from the GUI by doing: >> >> >> Gofer new >> smalltalkhubUser: 'bromagosa' project: 'StarUOCs'; >> package: 'ConfigurationOfStarUOCs'; >> load. >> >> ConfigurationOfStarUOCs load. >> >> What can be happening? My version is: >> >> pharo-vm-nox Pharo.image printVersion >> [version] 3.0 #30846 >> >> >> >> 2014-05-02 13:51 GMT+02:00 Bernat Romagosa <tibabenfortlapalanca(a)gmail.com<mailto:tibabenfortlapalanca@gmail.com>>: >> I see, thanks a lot! :) >> >> >> 2014-05-02 13:45 GMT+02:00 Sven Van Caekenberghe <sven(a)stfx.eu<mailto:sven@stfx.eu>>: >> >> The best approach is to use Configurations and the config handler: >> >> $ ./pharo Pharo.image config >> Command line handler for dealing with Metacello configurations from the command line >> >> Usage: config [--help] <repository url> [<configuration>] [--install[=<version>]] [--group=<group>] [--username=<username>] [--password=<password>] >> --help show this help message >> <repository url> A Monticello repository name >> <configuration> A valid Metacello Configuration name >> <version> A valid version for the given configuration >> <group> A valid Metacello group name >> <username> An optional username to access the configuration's repository >> <password> An optional password to access the configuration's repository >> >> Examples: >> # display this help message >> pharo Pharo.image config >> >> # list all configurations of a repository >> pharo Pharo.image config $MC_REPOS_URL >> >> # list all the available versions of a confgurtation >> pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo >> >> # install the stable version >> pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo --install >> >> #install a specific version '1.5' >> pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo --install=1.5 >> >> #install a specific version '1.5' and only a specific group 'Tests' >> pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo --install=1.5 --group=Tests >> >> The following article contains this approach as well: >> >> http://zn.stfx.eu/zn/build-and-deploy-1st-webapp/ >> >> http://zn.stfx.eu/zn/build-and-deploy-1st-webapp/#deployingforproduction >> >> HTH, >> >> Sven >> >> On 02 May 2014, at 13:28, Bernat Romagosa <tibabenfortlapalanca(a)gmail.com<mailto:tibabenfortlapalanca@gmail.com>> wrote: >> >>> Is there a way to do it? >>> >>> Here's my attempt: >>> >>> pharo-vm-nox MyImage.image eval "Gofer new smalltalkhubUser: 'myUser' project: 'MyProject'; package: 'MyPackage'; load. Smalltalk snapshot: true andQuit: true" >>> >>> then: >>> >>> pharo-vm-nox MyImage.image eval --no-quit "MyJustLoadedClass start" >>> >>> results in: >>> >>> UndefinedObject>>DoIt (MyJustLoadedClass is Undeclared) >>> MessageNotUnderstood: receiver of "start" is nil >>> >>> Thanks! >>> Bernat. >>> >>> -- >>> Bernat Romagosa. >> >> >> >> >> >> -- >> Bernat Romagosa. >> >> >> >> -- >> Bernat Romagosa. > > -- Bernat Romagosa. -- Bernat Romagosa.

May 2, 2014

Re: [Pharo-users] Updating packages from command line

by Bernat Romagosa

I started over from scratch, filed out and in the config and package, erased all packages in the repo, pushed them back and still no success. I think I'll manually scp the image file for now... :P Thanks guys! 2014-05-02 15:21 GMT+02:00 Bernat Romagosa <tibabenfortlapalanca(a)gmail.com>: > Indeed something's broken... I used the versionner tool to build it, but I > think something went wrong. > > > http://smalltalkhub.com/#!/~bromagosa/StarUOCs/versions/ConfigurationOfStar… > > Try to download the mcz, it fails. > > I don't understand why MC added (2) to the file name. > > > > > 2014-05-02 15:13 GMT+02:00 Sven Van Caekenberghe <sven(a)stfx.eu>: > > I think something must be broken with his configuration, you cannot even >> list it... >> >> On 02 May 2014, at 15:11, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: >> >> > pharo-vm-nox Pharo.image config >> http://smalltalkhub.com/mc/bromagosa/StarUOCs/main ConfigurationOfStarUOCs âinstall=development >> > >> > has to work. All out infrastructure is based on that :) >> > >> > Esteban >> > >> > On 02 May 2014, at 15:05, Bernat Romagosa < >> tibabenfortlapalanca(a)gmail.com> wrote: >> > >> >> Hmm it doesn't seem to work... >> >> >> >> pharo-vm-nox Pharo.image config >> http://smalltalkhub.com/mc/bromagosa/StarUOCs/main >> >> KeyNotFound: key #ConfigurationOfStarUOCs not found in SystemDictionary >> >> >> >> But the config is there and I can load it from the GUI by doing: >> >> >> >> >> >> Gofer new >> >> smalltalkhubUser: 'bromagosa' project: 'StarUOCs'; >> >> package: 'ConfigurationOfStarUOCs'; >> >> load. >> >> >> >> ConfigurationOfStarUOCs load. >> >> >> >> What can be happening? My version is: >> >> >> >> pharo-vm-nox Pharo.image printVersion >> >> [version] 3.0 #30846 >> >> >> >> >> >> >> >> 2014-05-02 13:51 GMT+02:00 Bernat Romagosa < >> tibabenfortlapalanca(a)gmail.com>: >> >> I see, thanks a lot! :) >> >> >> >> >> >> 2014-05-02 13:45 GMT+02:00 Sven Van Caekenberghe <sven(a)stfx.eu>: >> >> >> >> The best approach is to use Configurations and the config handler: >> >> >> >> $ ./pharo Pharo.image config >> >> Command line handler for dealing with Metacello configurations from >> the command line >> >> >> >> Usage: config [--help] <repository url> [<configuration>] >> [--install[=<version>]] [--group=<group>] [--username=<username>] >> [--password=<password>] >> >> --help show this help message >> >> <repository url> A Monticello repository name >> >> <configuration> A valid Metacello Configuration name >> >> <version> A valid version for the given configuration >> >> <group> A valid Metacello group name >> >> <username> An optional username to access the >> configuration's repository >> >> <password> An optional password to access the >> configuration's repository >> >> >> >> Examples: >> >> # display this help message >> >> pharo Pharo.image config >> >> >> >> # list all configurations of a repository >> >> pharo Pharo.image config $MC_REPOS_URL >> >> >> >> # list all the available versions of a confgurtation >> >> pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo >> >> >> >> # install the stable version >> >> pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo >> --install >> >> >> >> #install a specific version '1.5' >> >> pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo >> --install=1.5 >> >> >> >> #install a specific version '1.5' and only a specific group >> 'Tests' >> >> pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo >> --install=1.5 --group=Tests >> >> >> >> The following article contains this approach as well: >> >> >> >> http://zn.stfx.eu/zn/build-and-deploy-1st-webapp/ >> >> >> >> >> http://zn.stfx.eu/zn/build-and-deploy-1st-webapp/#deployingforproduction >> >> >> >> HTH, >> >> >> >> Sven >> >> >> >> On 02 May 2014, at 13:28, Bernat Romagosa < >> tibabenfortlapalanca(a)gmail.com> wrote: >> >> >> >>> Is there a way to do it? >> >>> >> >>> Here's my attempt: >> >>> >> >>> pharo-vm-nox MyImage.image eval "Gofer new smalltalkhubUser: 'myUser' >> project: 'MyProject'; package: 'MyPackage'; load. Smalltalk snapshot: true >> andQuit: true" >> >>> >> >>> then: >> >>> >> >>> pharo-vm-nox MyImage.image eval --no-quit "MyJustLoadedClass start" >> >>> >> >>> results in: >> >>> >> >>> UndefinedObject>>DoIt (MyJustLoadedClass is Undeclared) >> >>> MessageNotUnderstood: receiver of "start" is nil >> >>> >> >>> Thanks! >> >>> Bernat. >> >>> >> >>> -- >> >>> Bernat Romagosa. >> >> >> >> >> >> >> >> >> >> >> >> -- >> >> Bernat Romagosa. >> >> >> >> >> >> >> >> -- >> >> Bernat Romagosa. >> > >> > >> >> >> > > > -- > Bernat Romagosa. > -- Bernat Romagosa.

May 2, 2014