- Pharo-users - lists.pharo.org

Re: [Pharo-users] compiling Pillar files locally (for LaserGame book)

by Ben Coman

May 11, 2014

Re: [Pharo-users] compiling Pillar files locally (for LaserGame book)

by kilon alios

well in order to include a file in your git repo you will have to add it. The fact that the file or folder exists inside your repo folder does not mean anything to git. So you need to issue a "git add" command. Because when you git add a folder it git adds all the files and sub folders it contain its possible to create a git ignore file that will tell git what to ignore. Again files you add inside thoses folders or new subfolders after the git add command will not be added so git ignore is not needed for those. >From what I see from working in UpdatedPharoByExample is that a gitignore is already made for all compiled files like html, pdf and anything else that pillar generated in the process of compilation so you dont need to gitignore those. its also possible to "git rm" this command will remove the file or folder from your git repo but it wont delete it, the file/folder will keep being inside your git repo local folder but it wont be part of your git repo and wont be tracked. I can't recommend GIT DOCs enough. These guys know how to write documentation and will amazed you how simple yet powerful GIT really is. you can find the docs here -> http://git-scm.com/documentation also another thing, git add and rm commands need a git commit and git push to be uploaded and committed to you online repo. Of course you can do other modifications and actions and commit all of them with one commit and push. On Sat, May 10, 2014 at 6:51 PM, Ben Coman <btc(a)openinworld.com> wrote: > kilon alios wrote: > > Yes I am using MacTex too, it works like a charm. I compile the pdf always > before committing to Github to make sure I am not braking enough. I also > installed Texmaker which is an even better editor for Tex files and > compiling to pdf. > > http://www.xm1math.net/texmaker/ > > Though so far emacs with pillar mode and compile.sh is more than enough > for my needs. Textmate also is good enough. > > > Thanks Kilon. Good to know. > > btw, I see that files are generated under that git-clone created. Being > somewhat new to git, when I push back to my fork on github, then issue a > pull request to SquareBrackets, what stops the generated files being > included ? > > cheers -ben > > > > > On Sat, May 10, 2014 at 6:21 PM, Ben Coman <btc(a)openinworld.com> wrote: > >> nacho wrote >> > 2) Yes you have to have TEXLive installed. >> > 3) If you install it on Mavericks check the paths. TexLive now install >> > into a weird location and you should add that location to your path or >> > else you'll get an error. >> >> For me it was not a path issue. I installed MacTex and it added >> /usr/texbin to my PATH. That contains 23 links to pdftext (ls -l | grep >> pdftex). However pdflatex was not one of them. Fixed my problem with the >> following: >> # cd /usr/texbin >> # sudo ln -s pdftex pdflatex >> >> Other than that, it was quite straight forward. So now I have forked the >> PharoLaserGameTutorial repo, and compiled it to a PDF, and can start >> working >> on it :) >> >> cheers -ben >> > >

May 10, 2014

Re: [Pharo-users] Creating a subclass from nautilus/Pharo3

by Sven Van Caekenberghe

On 10 May 2014, at 15:57, Hilaire Fernandes <hilaire.fernandes(a)gmail.com> wrote: > Hi, > > In Nautilus, to creat a subclass I have to go in menu Class > 'Refactoring>Class Refactoring>Generate Subclass...' (Why is it > refactring? It seems NOT for me), The class menu in Nautilus is not perfect (in the sense of ordering things in terms of there importance), but it is hard to find a design that pleases everyone I guess. In a sense, creating a subclass is a first step in a possible refactoring, no ? And a empty subclass is a compatible change, right ;-) Maybe the 'Add class' item could be more intelligent when you have a class selected... > anyway I can input a subclass name, > then I have this strange dialog with a broken morph. Screen shot enclosed. That should become an issue then. > Hilaire > > > -- > Dr. Geo http://drgeo.eu > <pharo3-create-a-subclass.png>

May 10, 2014

Re: [Pharo-users] compiling Pillar files locally (for LaserGame book)

by Ben Coman

May 10, 2014

Re: [Pharo-users] compiling Pillar files locally (for LaserGame book)

by kilon alios

Yes I am using MacTex too, it works like a charm. I compile the pdf always before committing to Github to make sure I am not braking enough. I also installed Texmaker which is an even better editor for Tex files and compiling to pdf. http://www.xm1math.net/texmaker/ Though so far emacs with pillar mode and compile.sh is more than enough for my needs. Textmate also is good enough. On Sat, May 10, 2014 at 6:21 PM, Ben Coman <btc(a)openinworld.com> wrote: > nacho wrote > > 2) Yes you have to have TEXLive installed. > > 3) If you install it on Mavericks check the paths. TexLive now install > > into a weird location and you should add that location to your path or > > else you'll get an error. > > For me it was not a path issue. I installed MacTex and it added > /usr/texbin to my PATH. That contains 23 links to pdftext (ls -l | grep > pdftex). However pdflatex was not one of them. Fixed my problem with the > following: > # cd /usr/texbin > # sudo ln -s pdftex pdflatex > > Other than that, it was quite straight forward. So now I have forked the > PharoLaserGameTutorial repo, and compiled it to a PDF, and can start > working > on it :) > > cheers -ben > > > > -- > View this message in context: > http://forum.world.st/compiling-Pillar-files-locally-for-LaserGame-book-tp4… > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > >

May 10, 2014

Re: [Pharo-users] compiling Pillar files locally (for LaserGame book)

by Ben Coman

nacho wrote > 2) Yes you have to have TEXLive installed. > 3) If you install it on Mavericks check the paths. TexLive now install > into a weird location and you should add that location to your path or > else you'll get an error. For me it was not a path issue. I installed MacTex and it added /usr/texbin to my PATH. That contains 23 links to pdftext (ls -l | grep pdftex). However pdflatex was not one of them. Fixed my problem with the following: # cd /usr/texbin # sudo ln -s pdftex pdflatex Other than that, it was quite straight forward. So now I have forked the PharoLaserGameTutorial repo, and compiled it to a PDF, and can start working on it :) cheers -ben -- View this message in context: http://forum.world.st/compiling-Pillar-files-locally-for-LaserGame-book-tp4… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

May 10, 2014

Re: [Pharo-users] Error compiling DrGeo in pahro3

by Hilaire Fernandes

#: must be written #':' with Opal Hilaire Le 10/05/2014 15:38, Hilaire Fernandes a Ã©crit : > Hi, > > I got this error when compiling DrGeo in Pharo3 (screenshot). There is > not debug log. > > Thanks > > Hilaire > > -- Dr. Geo http://drgeo.eu

May 10, 2014

Pharo3, what refactoring in morph mouse event?

by Hilaire Fernandes

Hi, With Pharo3, each time I click and drag in the DrGeo canvas I have a drag event of the surrounding DrGeo window. The mouse events doe not reach anymore the canvas as it should be (captured with usuale. Is it possible to know the refactoring in the mouse event and related departments. Thanks Hilaire -- Dr. Geo http://drgeo.eu

May 10, 2014

Creating a subclass from nautilus/Pharo3

by Hilaire Fernandes

Hi, In Nautilus, to creat a subclass I have to go in menu Class 'Refactoring>Class Refactoring>Generate Subclass...' (Why is it refactring? It seems NOT for me), anyway I can input a subclass name, then I have this strange dialog with a broken morph. Screen shot enclosed. Hilaire -- Dr. Geo http://drgeo.eu

May 10, 2014

Re: [Pharo-users] Best/simplest way to read and write to a MySQL database

by Pablo R. Digonzelli

"PharoPro" ? Ing. Pablo Digonzelli Software Solutions IP-Solutiones SRL Metrotec SRL 25 de Mayo 521 Email: pdigonzelli(a)softsargentina.com pdigonzelli(a)gmail.com Cel: 5493815982714 ----- Mensaje original ----- De: "Robert Shiplett" <grshiplett(a)gmail.com> Para: "Any question about pharo is welcome" <pharo-users(a)lists.pharo.org> Enviados: SÃ¡bado, 10 de Mayo 2014 10:01:51 Asunto: Re: [Pharo-users] Best/simplest way to read and write to a MySQL database "PharoPro" ? On 10 May 2014 04:09, stepharo < stepharo(a)free.fr > wrote: On 9/5/14 21:54, Andy Burnett wrote: <blockquote> á§ Thanks everyone, I shall try the DBXTalk approach. It seems as though it is being actively developed. As a side note, I think it would be great if Pharo could identify a 'main stream' route for dealing with RDBMS. It would be similar to the way in which Zinc is the main way to do http etc. Yes this is on our roadmap. We would like to have a page with all the supported and 100% robust solutions. We will start working on that with esteban in the context of PharoPro. <blockquote> I wouldn't want to discourage anyone from doing interestng experiments, it's just that a main stream route would help people to get going. </blockquote> 100% agreed. <blockquote> Cheers Andy </blockquote> </blockquote>

May 10, 2014