Pharo-users

By thread

pharo-users@lists.pharo.org

6 participants
50352 messages

Re: [Pharo-users] ViDI Error: glx not supported

by Marcus Denker

> On 27 Nov 2014, at 10:23, kilon alios <kilon.alios(a)gmail.com> wrote: > > What is Vidi ? cant find it in smalltalkhub > http://vidi.inf.usi.ch Marcus

Nov. 27, 2014

Re: [Pharo-users] ViDI Error: glx not supported

by kilon alios

What is Vidi ? cant find it in smalltalkhub On Thu, Nov 27, 2014 at 10:57 AM, Yuriy Tymchuk <yuriy.tymchuk(a)me.com> wrote: > Hi Rafael, > > thank you for your interest in ViDI. I have not used Pharo on Linux, but I > hope that soon we will find a solution for this :) > > Uko > > > On 27 Nov 2014, at 01:41, Rafael Luque <rafael.luque.leiva(a)gmail.com> > wrote: > > > > Hi, > > > > I installed ViDI on Pharo 4 following the project instructions detailed > in its GitHub page: > > > > Gofer new > > smalltalkhubUser: 'YuriyTymchuk' > > project: 'Configuration'; > > configurationOf: 'Vidi'; > > load. > > #ConfigurationOfVidi asClass loadStable > > > > When I launch the ViDI option I get the error: "Error: glx not > supported". > > > > I'm using Gentoo Linux with NVidia Optimus graphic card, so I use > bumblebee to switch to NVidia and launched pharo using optirun command like > this: > > > > $ optirun pharo-ui my-image > > > > I get glxspheres64 running successfully using the same procedure. > > > > How can I activate GLX support inside the Pharo image? I noted the > option System > Settings > FFI > "Path to OpenGL library (on linux)" > however I don't see (or I don't know) how to set this value. > > > > Thank you. > > >

Nov. 27, 2014

Re: [Pharo-users] ViDI Error: glx not supported

by Yuriy Tymchuk

Hi Rafael, thank you for your interest in ViDI. I have not used Pharo on Linux, but I hope that soon we will find a solution for this :) Uko > On 27 Nov 2014, at 01:41, Rafael Luque <rafael.luque.leiva(a)gmail.com> wrote: > > Hi, > > I installed ViDI on Pharo 4 following the project instructions detailed in its GitHub page: > > Gofer new > smalltalkhubUser: 'YuriyTymchuk' > project: 'Configuration'; > configurationOf: 'Vidi'; > load. > #ConfigurationOfVidi asClass loadStable > > When I launch the ViDI option I get the error: "Error: glx not supported". > > I'm using Gentoo Linux with NVidia Optimus graphic card, so I use bumblebee to switch to NVidia and launched pharo using optirun command like this: > > $ optirun pharo-ui my-image > > I get glxspheres64 running successfully using the same procedure. > > How can I activate GLX support inside the Pharo image? I noted the option System > Settings > FFI > "Path to OpenGL library (on linux)" however I don't see (or I don't know) how to set this value. > > Thank you.

Nov. 27, 2014

Re: [Pharo-users] Alternate browser

by Craig

Thanks Sven, Never mind. I just installed the September 25 VM and AltBrowser now works just fine :) Craig -----Original Message----- From: Craig [mailto:craig@hivemind.net] Sent: 27 November 2014 10:11 AM To: 'Any question about pharo is welcome' Subject: RE: [Pharo-users] Alternate browser Hi Sven, My VM is Cog VM 4.0.0 (release) Craig -----Original Message----- From: Pharo-users [mailto:pharo-users-bounces@lists.pharo.org] On Behalf Of Sven Van Caekenberghe Sent: 27 November 2014 10:06 AM To: Any question about pharo is welcome Subject: Re: [Pharo-users] Alternate browser You do not have to install anything extra inside the image, Zodiac is a standard part of Pharo. But, as the error says 'plugin missing', you do need to use a VM with the SSL plugin, like a normal Pharo VM. Which VM/platform are you using ?

Nov. 27, 2014

Re: [Pharo-users] Alternate browser

by Sven Van Caekenberghe

That is not the Pharo VM. And you didn't tell me which platform you are on. If you are on Linux, you need libSqueakSSL next to your VM binary. $ ldd bin/libSqueakSSL.so linux-gate.so.1 => (0xffffe000) libssl.so.0.9.8 => /usr/lib32/i686/cmov/libssl.so.0.9.8 (0xf768e000) libc.so.6 => /lib32/libc.so.6 (0xf753a000) libcrypto.so.0.9.8 => /usr/lib32/i686/cmov/libcrypto.so.0.9.8 (0xf73f7000) libdl.so.2 => /lib32/libdl.so.2 (0xf73f3000) libz.so.1 => /usr/lib32/libz.so.1 (0xf73de000) /lib/ld-linux.so.2 (0xf76e6000) Note that on a 64-bit system, you need 32-bit SSL libraries on your system. > On 27 Nov 2014, at 09:11, Craig <craig(a)hivemind.net> wrote: > > Hi Sven, > > My VM is Cog VM 4.0.0 (release) > > Craig > > -----Original Message----- > From: Pharo-users [mailto:pharo-users-bounces@lists.pharo.org] On Behalf Of Sven Van Caekenberghe > Sent: 27 November 2014 10:06 AM > To: Any question about pharo is welcome > Subject: Re: [Pharo-users] Alternate browser > > You do not have to install anything extra inside the image, Zodiac is a standard part of Pharo. > > But, as the error says 'plugin missing', you do need to use a VM with the SSL plugin, like a normal Pharo VM. > > Which VM/platform are you using ? > >

Nov. 27, 2014

Re: [Pharo-users] Alternate browser

by phil＠highoctane.be

AltBrowser loads ok in my 3.0 on PharoVM. Phil â

Nov. 27, 2014

Re: [Pharo-users] Alternate browser

by Craig

Hi Sven, My VM is Cog VM 4.0.0 (release) Craig -----Original Message----- From: Pharo-users [mailto:pharo-users-bounces@lists.pharo.org] On Behalf Of Sven Van Caekenberghe Sent: 27 November 2014 10:06 AM To: Any question about pharo is welcome Subject: Re: [Pharo-users] Alternate browser You do not have to install anything extra inside the image, Zodiac is a standard part of Pharo. But, as the error says 'plugin missing', you do need to use a VM with the SSL plugin, like a normal Pharo VM. Which VM/platform are you using ?

Nov. 27, 2014

Re: [Pharo-users] Alternate browser

by Sven Van Caekenberghe

You do not have to install anything extra inside the image, Zodiac is a standard part of Pharo. But, as the error says 'plugin missing', you do need to use a VM with the SSL plugin, like a normal Pharo VM. Which VM/platform are you using ? > On 27 Nov 2014, at 08:23, Craig <craig(a)hivemind.net> wrote: > > So, I would like to look at AltBrowser, but when I try to install it in a Pharo 4 image I get an exception âZdcPluginMissing: SSL/TLS plugin initialization failedâ Any ideas on where to find it? > > Iâve already tried installing Zodiac, Zinc-Zodiac and SqueakSSL and still no plugin. > > Craig > > > > From: Pharo-users [mailto:pharo-users-bounces@lists.pharo.org] On Behalf Of kilon alios > Sent: 27 November 2014 12:28 AM > To: Any question about pharo is welcome > Subject: Re: [Pharo-users] Alternate browser > > "Kilon is looking to see if he can build one. I believe he can :)" > > I wont be building one from scratch , I like your AltBrowser too much to do that. You basically took the 4 panels of the System Browser and reduced them to 2 panels. My goal will be to reduce them to one panel .For that to happens I already forked your browser and I will adding small changes here and there. > > I am also interested how to make text code more visual, think of it like adding halos to code itself. I am very interested into visual coding. Other ideas I have is dynamic documentation inside the same panel and also the ability to tag methods and classes for easier browsing. So mine will be just an extension to yours. One step at a time and see where it takes me.

Nov. 27, 2014

Re: [Pharo-users] Alternate browser

by Craig

So, I would like to look at AltBrowser, but when I try to install it in a Pharo 4 image I get an exception âZdcPluginMissing: SSL/TLS plugin initialization failedâ Any ideas on where to find it? Iâve already tried installing Zodiac, Zinc-Zodiac and SqueakSSL and still no plugin. Craig From: Pharo-users [mailto:pharo-users-bounces@lists.pharo.org] On Behalf Of kilon alios Sent: 27 November 2014 12:28 AM To: Any question about pharo is welcome Subject: Re: [Pharo-users] Alternate browser "Kilon is looking to see if he can build one. I believe he can :)" I wont be building one from scratch , I like your AltBrowser too much to do that. You basically took the 4 panels of the System Browser and reduced them to 2 panels. My goal will be to reduce them to one panel .For that to happens I already forked your browser and I will adding small changes here and there. I am also interested how to make text code more visual, think of it like adding halos to code itself. I am very interested into visual coding. Other ideas I have is dynamic documentation inside the same panel and also the ability to tag methods and classes for easier browsing. So mine will be just an extension to yours. One step at a time and see where it takes me.

Nov. 27, 2014

Re: [Pharo-users] libevent binding for haro ?

by Marcus Denker

> On 26 Nov 2014, at 23:48, Alain Rastoul <alf.mmm.cat(a)gmail.com> wrote: > > Do someone knows about a libevent binding for Pharo , or made experiments with Pharo and this library ? > After some experiment with the standard socket IO handling, I have the feeling that it cannot scale on unix and neither on windows â¦ I would be very interested in that, yes. If I understand correctly, this is in the core what makes NodeJS scalable, or not? Marcus

Nov. 27, 2014

Jump to page: