- Pharo-users - lists.pharo.org

Re: [Pharo-users] Any static web site generators for pharo with bootstrap support?

by Damien Cassou

Hi Offray, Offray Vladimir Luna CÃ¡rdenas writes: > I'm planning to make a web site. Nothing fancy, just a web site for the > grafoscopio project I have told you about already. I started to use > Nikola blog engine[1], but, after a while I thought I want to try > something else, something that can create static web sites like Nikola, > but with more interactive feedback and made in Smalltalk. I have found > Bootstrap for Seaside [2], but I don't want the "Seaside" part in the > sense that I don't want to create any behaviour served by Seaside or > configure any server for that matter, just to put some Smalltalk code > that produces static html powered by boostrap and put it under > distributed source control management, like I do now with my blog. There > is something like that in Pharo/Smalltalk or any approach you suggest me > to make it happen fluidly? to describe the content of your webpages, you can use Pillar (http://www.smalltalkhub.com/#!/~Pier/Pillar) Pillar leverages Norbert Hartl's Mustache template engine (http://smalltalkhub.com/#!/~NorbertHartl/Mustache) If these top are not enough, you can add Marina on top of that (https://github.com/tide-framework/marina) Just note that (1) Marina is not maintained and (2) you would have to tweak it a bit to generate static pages (but this should not be hard because Marina uses Pillar and Mustache and has been made to produce static pages). -- Damien Cassou http://damiencassou.seasidehosting.st "Success is the ability to go from one failure to another without losing enthusiasm." --Winston Churchill

Feb. 21, 2015

Re: [Pharo-users] Canvas: Transform Width and Height Independently

by Sean P. DeNigris

Sean P. DeNigris wrote > MorphicTransform's scaling method arguments were either named > (unhelpfully) 's' or (misleadingly) 'aFloat' Issue 14971 MorphicTransform: Better Argument Names Fix in inbox... Scale: "s" -> aNumberOrPoint Angle: "a" -> radians Offset: a -> aPoint ----- Cheers, Sean -- View this message in context: http://forum.world.st/Canvas-Transform-Width-and-Height-Independently-tp480… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

Feb. 21, 2015

Re: [Pharo-users] Canvas: Transform Width and Height Independently

by Sean P. DeNigris

Sean P. DeNigris wrote > That worked But actually, it was totally unnecessary! MorphicTransform's scaling method arguments were either named (unhelpfully) 's' or (misleadingly) 'aFloat', but apparently, I can just pass aPoint to scale x and y separately :) So I'm back to the simple version... drawOn: aCanvas | transform widthScale heightScale | widthScale := self innerBounds width / self image width. heightScale := self innerBounds height / self image height. transform := MorphicTransform new withScale: widthScale@heightScale. aCanvas warpImage: self image transform: transform at: self innerBounds origin Thanks for talking me through it! I learned a lot... ----- Cheers, Sean -- View this message in context: http://forum.world.st/Canvas-Transform-Width-and-Height-Independently-tp480… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

Feb. 21, 2015

Re: [Pharo-users] Canvas: Transform Width and Height Independently

by Sean P. DeNigris

Nicolai Hess wrote > You can create a new Form... warpblt into this form... Ah, thanks. That worked. It became: drawOn: aCanvas | tempForm | tempForm := Form extent: self innerBounds extent depth: self image depth. (WarpBlt current toForm: tempForm) sourceForm: self image destRect: tempForm relativeRectangle; combinationRule: Form paint; cellSize: 1; warpBits. aCanvas drawImage: tempForm at: self innerBounds origin ----- Cheers, Sean -- View this message in context: http://forum.world.st/Canvas-Transform-Width-and-Height-Independently-tp480… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

Feb. 21, 2015

Any static web site generators for pharo with bootstrap support?

by Offray Vladimir Luna CÃ¡rdenas

Hi all, I'm planning to make a web site. Nothing fancy, just a web site for the grafoscopio project I have told you about already. I started to use Nikola blog engine[1], but, after a while I thought I want to try something else, something that can create static web sites like Nikola, but with more interactive feedback and made in Smalltalk. I have found Bootstrap for Seaside [2], but I don't want the "Seaside" part in the sense that I don't want to create any behaviour served by Seaside or configure any server for that matter, just to put some Smalltalk code that produces static html powered by boostrap and put it under distributed source control management, like I do now with my blog. There is something like that in Pharo/Smalltalk or any approach you suggest me to make it happen fluidly? [1] http://getnikola.com/ [2] http://smalltalkhub.com/#!/~TorstenBergmann/Bootstrap Thanks, Offray

Feb. 21, 2015

Re: [Pharo-users] Pharo 4 - current state?

by Ben Coman

On Sat, Feb 21, 2015 at 2:44 AM, phil(a)highoctane.be <phil(a)highoctane.be> wrote: > > Le 20 fÃ©vr. 2015 19:10, "sergio_101" <sergio.rrd(a)gmail.com> a Ã©crit : > > > > to the point that during regular work, i am starting to hear "i wish we > (ruby ecosystem) had (insert ST goodness) here.." > > I'd like to ask you for a lit of these. > > Also, what are the things that required to be cleared up? > > > +1. Please compile a list as you go :) Peoples first impressions good & bad are useful, and its the sort of comparison that is hard to think back to later on. good luck, cheers -ben

Feb. 20, 2015

Re: [Pharo-users] Canvas: Transform Width and Height Independently

by Nicolai Hess

And there is FormCanvas>>#warpImage:transform:at:sourceRect:cellSize: this one works with a MatrixTransform2x3 (this may support scaling for x and y). 2015-02-21 0:40 GMT+01:00 Nicolai Hess <nicolaihess(a)web.de>: > 2015-02-20 23:56 GMT+01:00 Sean P. DeNigris <sean(a)clipperadams.com>: > >> I'm implementing a SimpleImageMorph which squeezes the form into the >> Morph's >> inner bounds instead of the weird TransformMorph thing. >> >> As a spike, I wrote: >> | transform scale | >> scale := self innerBounds width / self image width. >> transform := MorphicTransform new setScale: scale. >> aCanvas warpImage: self image transform: transform at: self >> innerBounds >> origin >> >> But obviously this only takes the width into account. How would I >> transform >> both of the forms dimensions to the corresponding dimension of the morph's >> inner bounds? >> >> > I think there is no direct support in Canvas API. > You can > create a new Form > warpblt into this form > use the canvas to draw the new form > > > > |f| > f:=Form extent:100@400 depth:32. > (WarpBlt current toForm: f) > sourceForm: PolymorphSystemSettings pharoLogoForm destRect: f boundingBox; > combinationRule: Form paint; cellSize:2; warpBits. > f asMorph openInHand > > > > > > >> >> >> ----- >> Cheers, >> Sean >> -- >> View this message in context: >> http://forum.world.st/Canvas-Transform-Width-and-Height-Independently-tp480… >> Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. >> >> >

Feb. 20, 2015

Re: [Pharo-users] Canvas: Transform Width and Height Independently

by Nicolai Hess

2015-02-20 23:56 GMT+01:00 Sean P. DeNigris <sean(a)clipperadams.com>: > I'm implementing a SimpleImageMorph which squeezes the form into the > Morph's > inner bounds instead of the weird TransformMorph thing. > > As a spike, I wrote: > | transform scale | > scale := self innerBounds width / self image width. > transform := MorphicTransform new setScale: scale. > aCanvas warpImage: self image transform: transform at: self > innerBounds > origin > > But obviously this only takes the width into account. How would I transform > both of the forms dimensions to the corresponding dimension of the morph's > inner bounds? > > I think there is no direct support in Canvas API. You can create a new Form warpblt into this form use the canvas to draw the new form |f| f:=Form extent:100@400 depth:32. (WarpBlt current toForm: f) sourceForm: PolymorphSystemSettings pharoLogoForm destRect: f boundingBox; combinationRule: Form paint; cellSize:2; warpBits. f asMorph openInHand > > > ----- > Cheers, > Sean > -- > View this message in context: > http://forum.world.st/Canvas-Transform-Width-and-Height-Independently-tp480… > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > >

Feb. 20, 2015

Canvas: Transform Width and Height Independently

by Sean P. DeNigris

I'm implementing a SimpleImageMorph which squeezes the form into the Morph's inner bounds instead of the weird TransformMorph thing. As a spike, I wrote: | transform scale | scale := self innerBounds width / self image width. transform := MorphicTransform new setScale: scale. aCanvas warpImage: self image transform: transform at: self innerBounds origin But obviously this only takes the width into account. How would I transform both of the forms dimensions to the corresponding dimension of the morph's inner bounds? ----- Cheers, Sean -- View this message in context: http://forum.world.st/Canvas-Transform-Width-and-Height-Independently-tp480… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

Feb. 20, 2015

Re: [Pharo-users] Pharo and Docker

by phil＠highoctane.be

I am aiming to do one for CentOS 7 in march. Phil Le 20 fÃ©vr. 2015 16:55, "Sean P. DeNigris" <sean(a)clipperadams.com> a Ã©crit : > ksi wrote > > Already accomplished for archlinux - https://hub.docker.com/u/geal/ > > The motivaton behind it - > > > https://www.clever-cloud.com/blog/guests/2015/01/05/smalltalk-in-the-cloud/ > > > > Cheers > > Kiril > > > > > > ----- > Cheers, > Sean > -- > View this message in context: > http://forum.world.st/Pharo-and-Docker-tp4806601p4806689.html > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > > >

Feb. 20, 2015