- Pharo-users - lists.pharo.org

Re: [Pharo-users] Seaside jQuery - Sorting a list with drag and drop and sending it back via Ajax causes OrderedCollection to turn into an Array?

by Johan Brichau

> On 27 Feb 2015, at 09:45, Serge Stinckwich <serge.stinckwich(a)gmail.com> wrote: > > You can contribute here: > https://github.com/SquareBracketAssociates/DynamicWebDevelopmentWithSeaside <https://github.com/SquareBracketAssociates/DynamicWebDevelopmentWithSeaside> Not really. The transfer of the book from Pier to Pillar is âin processâ and a bit âstalledâ because of an issue in Pillar. For now, if you can package your code and send it to the mailinglist, I can archive it and someone can pick it up when going through the book. Johan

Feb. 27, 2015

Re: [Pharo-users] slow pharo launcher

by Peter UhnÃ¡k

Loading it in the "broken" image didn't help, however new one works fine so I'll assume it is fixed. Thanks! Peter On Fri, Feb 27, 2015 at 5:54 PM, Ben Coman <btc(a)openinworld.com> wrote: > There was a leak, but was fixed some time ago. If you go into preferences > and Enable Development Environment, then you can go to the PharoLauncher > repository to load the latest Configuration and see if that resolves the > problem. > > btw, I was going to suggest using Configuration Browser, but the version > seems a bit behind. > > cheers -ben > > On Sat, Feb 28, 2015 at 12:40 AM, Peter UhnÃ¡k <i.uhnak(a)gmail.com> wrote: > >> For anyone that may be experiencing this... >> >> Yesterday when I got above around 20 images PharoLauncher suddenly >> started to load slowly (over 5s instead of 1-2s) and even when I deleted >> some it stayed slow, however downloading fresh Pharo 3 image and installing >> PharoLauncher it works nicely again even with many images... maybe some >> leak somewhere? >> >> Peter >> >> >

Feb. 27, 2015

Re: [Pharo-users] slow pharo launcher

by Ben Coman

There was a leak, but was fixed some time ago. If you go into preferences and Enable Development Environment, then you can go to the PharoLauncher repository to load the latest Configuration and see if that resolves the problem. btw, I was going to suggest using Configuration Browser, but the version seems a bit behind. cheers -ben On Sat, Feb 28, 2015 at 12:40 AM, Peter UhnÃ¡k <i.uhnak(a)gmail.com> wrote: > For anyone that may be experiencing this... > > Yesterday when I got above around 20 images PharoLauncher suddenly started > to load slowly (over 5s instead of 1-2s) and even when I deleted some it > stayed slow, however downloading fresh Pharo 3 image and installing > PharoLauncher it works nicely again even with many images... maybe some > leak somewhere? > > Peter > >

Feb. 27, 2015

slow pharo launcher

by Peter UhnÃ¡k

For anyone that may be experiencing this... Yesterday when I got above around 20 images PharoLauncher suddenly started to load slowly (over 5s instead of 1-2s) and even when I deleted some it stayed slow, however downloading fresh Pharo 3 image and installing PharoLauncher it works nicely again even with many images... maybe some leak somewhere? Peter

Feb. 27, 2015

Re: [Pharo-users] Zinc SSL Exception: decrypt failed code:5

by Sven Van Caekenberghe

Sabine, > On 27 Feb 2015, at 16:36, Sabine Manaa <manaa.sabine(a)gmail.com> wrote: > > Hi Sven, > Hi all, > > I try to send a curl command (which works at command line) from Pharo. > I get the error: "SSL Exception: decrypt failed code:5" > > The working command line command is: > > curl -v -H 'Accept: application/json' -u 'aUser:aPassword' > 'https://user.xxx.net/oauth/token?grant_type=client_credentials' > > the result is something like: > {"access_token":"a31xxxa-2a22-4xx6c-938d-2bd3ae4a0629","token_type":"bearer","expires_in":42095,"scope":"write"} > > My current Pharo code is: > | theZnClient | > theZnClient := ZnClient new > systemPolicy ; > https; > host: 'user.xxx.net'; > path: 'oauth/token?grant_type=client_credentials'; > username: 'aUser' password: 'aPassword'; > accept: ZnMimeType applicationJson; > get. > theZnClient inspect close. > > 'aPassword' and 'aUser' and xxx.net was replaced by me for security reasons. > > In Pharo, I get a walkback with the error message > 'SSL Exception: decrypt failed [code:-5]' > > But I see, that the ZdcSecureSocketStream has the correct result > ({"access_token":...":"write"}) in its collection attribute at > utf-8 string and at latin1-string > > so, the request is done and the result is available but then it fails here: > ZdcSecureSocketStream(Object)>>error: > ZdcSecureSocketStream>>sslException:code: > ZdcSecureSocketStream>>fillBytes:startingAt:count: in Block: [ ... > ZdcSecureSocketStream>>fillBytes:startingAt:count: > ZdcSecureSocketStream(ZdcSimpleSocketStream)>>fillReadBufferNoWait > ZdcSecureSocketStream(ZdcSimpleSocketStream)>>fillReadBuffer > ZdcSecureSocketStream(ZdcOptimizedSocketStream)>>readInto:startingAt:count: > ZnUTF8Encoder>>optimizedReadInto:startingAt:count:fromStream: > ZnUTF8Encoder>>readInto:startingAt:count:fromStream: > > Sven, I could send you the 'aPassword' and 'aUser' and the url by private > message. It would be fine if you could have a short look at it. The fact that there is readable text in the buffer of the ZdcSecureSocketStream is good, because it means that things basically work. One reason why this is failing might be that Zn tries to read more than there is available in the stream, when the content-length does not match. Encoding problems could be part of the problem too. Could you compare curl -v or curl -D - output with the request/response headers in Pharo ? Look for content-length and compare that with what it already read or not. Is the connection kept alive ? Also look at content-type and see if there is any charset encoding after application/json. Sven > Regards > Sabine > > > > -- > View this message in context: http://forum.world.st/Zinc-SSL-Exception-decrypt-failed-code-5-tp4808230p48… > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. >

Feb. 27, 2015

Re: [Pharo-users] Canvas: Transform Width and Height Independently

by stepharo

Just to not think much :) Take a little svg and try to rotate it and show all the steps you took and mistakes you made, until you got it right. Le 27/2/15 01:30, Sean P. DeNigris a Ã©crit : > stepharo wrote >> Could you write a little doc on what you learned? > I have to think about it. There were a lot of little ahas, but I don't know > how to summarize it... The biggest realization was that "canvases + > transforms" is extremely powerful! > > > > ----- > Cheers, > Sean > -- > View this message in context: http://forum.world.st/Canvas-Transform-Width-and-Height-Independently-tp480… > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > >

Feb. 27, 2015

Re: [Pharo-users] Zinc SSL Exception: decrypt failed code:5

by Sabine Manaa

Hi Sven, Hi all, I try to send a curl command (which works at command line) from Pharo. I get the error: "SSL Exception: decrypt failed code:5" The working command line command is: curl -v -H 'Accept: application/json' -u 'aUser:aPassword' 'https://user.xxx.net/oauth/token?grant_type=client_credentials' the result is something like: {"access_token":"a31xxxa-2a22-4xx6c-938d-2bd3ae4a0629","token_type":"bearer","expires_in":42095,"scope":"write"} My current Pharo code is: | theZnClient | theZnClient := ZnClient new systemPolicy ; https; host: 'user.xxx.net'; path: 'oauth/token?grant_type=client_credentials'; username: 'aUser' password: 'aPassword'; accept: ZnMimeType applicationJson; get. theZnClient inspect close. 'aPassword' and 'aUser' and xxx.net was replaced by me for security reasons. In Pharo, I get a walkback with the error message 'SSL Exception: decrypt failed [code:-5]' But I see, that the ZdcSecureSocketStream has the correct result ({"access_token":...":"write"}) in its collection attribute at utf-8 string and at latin1-string so, the request is done and the result is available but then it fails here: ZdcSecureSocketStream(Object)>>error: ZdcSecureSocketStream>>sslException:code: ZdcSecureSocketStream>>fillBytes:startingAt:count: in Block: [ ... ZdcSecureSocketStream>>fillBytes:startingAt:count: ZdcSecureSocketStream(ZdcSimpleSocketStream)>>fillReadBufferNoWait ZdcSecureSocketStream(ZdcSimpleSocketStream)>>fillReadBuffer ZdcSecureSocketStream(ZdcOptimizedSocketStream)>>readInto:startingAt:count: ZnUTF8Encoder>>optimizedReadInto:startingAt:count:fromStream: ZnUTF8Encoder>>readInto:startingAt:count:fromStream: Sven, I could send you the 'aPassword' and 'aUser' and the url by private message. It would be fine if you could have a short look at it. Regards Sabine -- View this message in context: http://forum.world.st/Zinc-SSL-Exception-decrypt-failed-code-5-tp4808230p48… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

Feb. 27, 2015

Re: [Pharo-users] Tables in Pillar

by stepharo

I do not think that you can since pillar is line based. Le 27/2/15 09:05, phil(a)highoctane.be a Ã©crit : > How is one doing a cell with content wrapping on multiple lines? > > With the > > | X | Y > | abcd | some very long text that should be wrapping but apparently > doesn't. So it is very annoying when one attempts to describe a long > thing, which is one purpose for a table. > > I get one single line for each entry. > > How to do that? > > TIA > Phil > >

Feb. 27, 2015

Re: [Pharo-users] Text styling

by stepharo

rubric now. TxText soon. Le 27/2/15 12:37, Peter UhnÃ¡k a Ã©crit : > Hi, > > I would like to have editor which would support different text styles > and sizes (e.g. each line different font/size/style/color/...)... > Rubric seems to be able to do it, Morphic is most likely also capable > of that. > In the mailing list I also saw TxText, however looking at it yesterday > it doesn't seem ready (broken fonts)... so which one would you recommend? > Rubric/Morphic/wait for TxText if soon/something else/...? > > Thanks, > Peter

Feb. 27, 2015

Text styling

by Peter UhnÃ¡k

Hi, I would like to have editor which would support different text styles and sizes (e.g. each line different font/size/style/color/...)... Rubric seems to be able to do it, Morphic is most likely also capable of that. In the mailing list I also saw TxText, however looking at it yesterday it doesn't seem ready (broken fonts)... so which one would you recommend? Rubric/Morphic/wait for TxText if soon/something else/...? Thanks, Peter

Feb. 27, 2015