- Pharo-users - lists.pharo.org

Re: [Pharo-users] Error while loading GitFileTree in Pharo 4.0

by Thierry Goubier

Le 16/03/2015 21:15, kilon alios a Ã©crit : > Smacc looks to load fine using its Github repo instructions. So far it > works ok too. Ok. That's me then. My code for pre-loading GitFileTree for accessing gitfiletree:// urls is pointing to an old version. I'll remove git access from the development part of the Configuration. I'm not that good at updating configurations spread over half a dozen repositories... I'd really prefer a single point of control and distribution. Thierry

March 16, 2015

Error retrieven GlorpDriverPostgreSQL from SmalltalkHub

by Esteban A. Maringolo

I'm getting the following error log when trying to load GlorpDriverPostgreSQL from SmalltalkHub ...RETRY->GlorpDriverPostgreSQL-MarianoMartinezPeck.5 ...RETRY->GlorpDriverPostgreSQL-MarianoMartinezPeck.5 Error: Could not access http://smalltalkhub.com/mc/PharoExtras/PostgresV2/main/: MessageNotUnderstood: ByteString>>substrings: MCSmalltalkhubRepository(Object)>>error: MCSmalltalkhubRepository>>loadAllFileNames in Block: [ :exception | self error: 'Could not access ' , s...etc... BlockClosure>>cull: MethodContext(ContextPart)>>handleSignal: in Block: [ self exceptionHandlerBlock cull: exception ] BlockClosure>>ensure: MethodContext(ContextPart)>>handleSignal: MethodContext(ContextPart)>>handleSignal: MessageNotUnderstood(Exception)>>signal ByteString(Object)>>doesNotUnderstand: #substrings: ZnMimeType class>>fromString: Is this a know issue or should I debug it? Regards, Esteban A. Maringolo

March 16, 2015

Re: [Pharo-users] Error while loading GitFileTree in Pharo 4.0

by kilon alios

Smacc looks to load fine using its Github repo instructions. So far it works ok too. On Mon, Mar 16, 2015 at 10:13 PM, Thierry Goubier <thierry.goubier(a)gmail.com > wrote: > Le 16/03/2015 20:27, kilon alios a Ã©crit : > >> Oh boy ... >> >> If I try to install Smacc from configuraton browser it crashes the >> latest pharo 4 image on macos. >> > > Cool! Not ;) > > I'll recreate a Pharo4 image and check all this. > > Thierry > > >> >> >> On Mon, Mar 16, 2015 at 8:40 PM, Thierry Goubier >> <thierry.goubier(a)gmail.com <mailto:thierry.goubier@gmail.com>> wrote: >> >> Hi Kilon, >> >> like a monday :) >> >> I made a mistake in the configuration, and you are apparently the >> first one to try the stable version of SmaCC. It's just an error in >> the url. I have uploaded a new version of the configuration. >> >> Note to the SmaCC users at a certain place... I'm not sure I'll >> maintain SmaCC v1 for Pharo 4, so it could be appropriate to think >> about pushing your parsers to the new version, no? >> >> Thierry >> >> Le 16/03/2015 19:18, kilon alios a Ã©crit : >> >> Thierry this is not your lucky week , Smacc is also fails to >> load from >> Configuration Browser with PrimitiveFailed: primitive #basicNew: >> in >> ByteString class failed >> >> >> Snip ... >> >> >> > >

March 16, 2015

Re: [Pharo-users] Error while loading GitFileTree in Pharo 4.0

by Thierry Goubier

Le 16/03/2015 20:27, kilon alios a Ã©crit : > Oh boy ... > > If I try to install Smacc from configuraton browser it crashes the > latest pharo 4 image on macos. Cool! Not ;) I'll recreate a Pharo4 image and check all this. Thierry > > > > On Mon, Mar 16, 2015 at 8:40 PM, Thierry Goubier > <thierry.goubier(a)gmail.com <mailto:thierry.goubier@gmail.com>> wrote: > > Hi Kilon, > > like a monday :) > > I made a mistake in the configuration, and you are apparently the > first one to try the stable version of SmaCC. It's just an error in > the url. I have uploaded a new version of the configuration. > > Note to the SmaCC users at a certain place... I'm not sure I'll > maintain SmaCC v1 for Pharo 4, so it could be appropriate to think > about pushing your parsers to the new version, no? > > Thierry > > Le 16/03/2015 19:18, kilon alios a Ã©crit : > > Thierry this is not your lucky week , Smacc is also fails to > load from > Configuration Browser with PrimitiveFailed: primitive #basicNew: in > ByteString class failed > > > Snip ... > >

March 16, 2015

Re: [Pharo-users] Viva: animation framework published in the metaRepo for Pharo40

by stepharo

> Looks good, pretty much what I had in mind for a basic animation > framework. Hi nicolai I still do not fully understand it :) I mean I could try to look smart and say yes. But there is a little voice in my head that said that I do not understand the little details. I think that I would have to rebuild or check all the code before. :) so this is why I stay humble :) > How about making the animated value more generic and independent of a > timer, more > like a "binding" > source -> property binding -> target > and an (timer-)animated binding > timer as source -> property binding -> target feel free to enhance it. Igor developed it in 2 days and we coded the turtle as an example so that I understand it but I failed :) > As I was thinking about an animation framework I got the idea of some > more generic > components. The components I had in mind: > Clock > EventQueue > Task > Binding or PropertyWrapper > Range (as a source for interpolators) > Interpolators > Transition/Animation ( connection of a source(timer) and property > bind, together with a range interpolator). > scaling/easing function (linear/quad/quadIn/quadOut) > Clock, EventQueue and Task classes (maybe we have some of them already) > may be usable for other things and are used here as building blocks > for the (transition/animation) framework. > (The idea is, to not invent a TimerFrameWorkClock/ TimerFrameWorkEvent > / TimerFrameWorkXXX....) > I think that what would be interesting is a small framework so that we could use it. > > Do you know this Squeak (Morphic) Animation Framework > (https://www.hpi.uni-potsdam.de/hirschfeld/trac/SqueakCommunityProjects/wiki…) > ? > I like how it wraps different property animation in different > animation classes (AlphaBlendAnimation/ColorAnimation ...). No I did not know it. I will add it to the list of things that I want to understand. First I should study for real Viva. > (I wonder why it is nowhere used) > > > And there is GLMAnimation, but I don't like how it is implemented. > So several propositions: - improve viva - design your own (check in block because alain has the logic for alarm and ticking) - are you interested to participate to a paper that we want to send to IWST on Viva (but it could be on animation frameworks). > > nicolai > > > > > > >

March 16, 2015

Re: [Pharo-users] Error while loading GitFileTree in Pharo 4.0

by Thierry Goubier

Le 16/03/2015 21:08, kilon alios a Ã©crit : > I am also getting a new error with gitFiletree > MNU: GitFileTreePcakageEntry>>beginsWith: I believe I did correct that one, I'll check. Thierry > On Mon, Mar 16, 2015 at 9:27 PM, kilon alios <kilon.alios(a)gmail.com > <mailto:kilon.alios@gmail.com>> wrote: > > Oh boy ... > > If I try to install Smacc from configuraton browser it crashes the > latest pharo 4 image on macos. > > > On Mon, Mar 16, 2015 at 8:40 PM, Thierry Goubier > <thierry.goubier(a)gmail.com <mailto:thierry.goubier@gmail.com>> wrote: > > Hi Kilon, > > like a monday :) > > I made a mistake in the configuration, and you are apparently > the first one to try the stable version of SmaCC. It's just an > error in the url. I have uploaded a new version of the > configuration. > > Note to the SmaCC users at a certain place... I'm not sure I'll > maintain SmaCC v1 for Pharo 4, so it could be appropriate to > think about pushing your parsers to the new version, no? > > Thierry > > Le 16/03/2015 19:18, kilon alios a Ã©crit : > > Thierry this is not your lucky week , Smacc is also fails to > load from > Configuration Browser with PrimitiveFailed: primitive > #basicNew: in > ByteString class failed > > > Snip ... > > >

March 16, 2015

Re: [Pharo-users] Error while loading GitFileTree in Pharo 4.0

by kilon alios

I am also getting a new error with gitFiletree MNU: GitFileTreePcakageEntry>>beginsWith: GitFileTreePackageEntry(Object)>>doesNotUnderstand: #beginsWith: [ :each | each beginsWith: aPackage , '-' ] in MCFileTreeGitRepositoryInspector(MCFileRepositoryInspector)>>packageIcon: in Block: [ :each | each beginsWith: aPackage , '-' ] [ :each | (aBlock value: each) ifTrue: [ ^ true ] ] in Set(Collection)>>anySatisfy: in Block: [ :each | ... Set>>do: Set(Collection)>>anySatisfy: MCFileTreeGitRepositoryInspector(MCFileRepositoryInspector)>>packageIcon: MCFileTreeGitRepositoryInspector(Object)>>perform:withEnoughArguments: PluggableIconListMorph>>itemMorphFor:index: [ :item :index | self itemMorphFor: item index: index ] in PluggableIconListMorph>>getList in Block: [ :item :index | self itemMorphFor: item index: in...etc... Array(SequenceableCollection)>>withIndexCollect: Array(SequenceableCollection)>>collectWithIndex: PluggableIconListMorph>>getList PluggableIconListMorph(PluggableListMorph)>>getListSize LazyMorphListMorph(LazyListMorph)>>getListSize LazyMorphListMorph>>listChanged PluggableIconListMorph(PluggableListMorph)>>updateList PluggableIconListMorph(PluggableListMorph)>>update: [ :aDependent | aDependent update: aParameter ] in MCFileTreeGitRepositoryInspector(Object)>>changed: in Block: [ :aDependent | aDependent update: aParameter ] DependentsArray>>do: MCFileTreeGitRepositoryInspector(Object)>>changed: [ packageList := result. self changed: #packageList ] in [ versions ifNotNil: [ result := Set new: versions size. versions do: [ :each | result add: each first ]. "sort loaded packages first, then alphabetically" loadedPackages := Set new: loaded size. loaded do: [ :each | loadedPackages add: (each copyUpToLast: $-) ]. result := result asArray sort: [ :a :b | | loadedA loadedB | loadedA := loadedPackages includes: a. loadedB := loadedPackages includes: b. loadedA = loadedB ifTrue: [ a < b ] ifFalse: [ loadedA ] ]. packagePattern ifNotEmpty: [ result := result select: [ :package | package name asLowercase includesSubstring: packagePattern ] ]. UIManager default defer: [ packageList := result. self changed: #packageList ] ] ] in MCFileTreeGitRepositoryInspector(MCFileRepositoryInspector)>>packageListUpdate in Block: [ ... WorldState>>runStepMethodsIn: WorldMorph>>runStepMethods WorldState>>doOneCycleNowFor: WorldState>>doOneCycleFor: WorldMorph>>doOneCycle [ [ World doOneCycle. Processor yield. false ] whileFalse: [ ] ] in MorphicUIManager>>spawnNewProcess in Block: [ ... [ self value. Processor terminateActive ] in BlockClosure>>newProcess in Block: [ ... On Mon, Mar 16, 2015 at 9:27 PM, kilon alios <kilon.alios(a)gmail.com> wrote: > Oh boy ... > > If I try to install Smacc from configuraton browser it crashes the latest > pharo 4 image on macos. > > > > On Mon, Mar 16, 2015 at 8:40 PM, Thierry Goubier < > thierry.goubier(a)gmail.com> wrote: > >> Hi Kilon, >> >> like a monday :) >> >> I made a mistake in the configuration, and you are apparently the first >> one to try the stable version of SmaCC. It's just an error in the url. I >> have uploaded a new version of the configuration. >> >> Note to the SmaCC users at a certain place... I'm not sure I'll maintain >> SmaCC v1 for Pharo 4, so it could be appropriate to think about pushing >> your parsers to the new version, no? >> >> Thierry >> >> Le 16/03/2015 19:18, kilon alios a Ã©crit : >> >>> Thierry this is not your lucky week , Smacc is also fails to load from >>> Configuration Browser with PrimitiveFailed: primitive #basicNew: in >>> ByteString class failed >>> >> >> Snip ... >> >> >

March 16, 2015

Re: [Pharo-users] Pharo 4 - current state?

by Offray Vladimir Luna CÃ¡rdenas

I found the problem. The issue is that Ctrl + arrow key is now Alt + Arrow key. The problem is that, in Linux Ctrl key stops working as usual inside Pharo and is replaced by alt key, which is certainly a problem when people is used to shorcuts and expect them to behave consistently between apps. Cheers, Offray El 16/03/15 a las 14:15, Offray Vladimir Luna CÃ¡rdenas escribiÃ³: > The only preference I can't find is the one which makes Control + arrow > key move/select words, like is usual on most programs. Should I fill a > bug report about enabling this preference? > > Cheers, > > Offray > > El 16/03/15 a las 13:48, Offray Vladimir Luna CÃ¡rdenas escribiÃ³: >> Thanks Esteban it worked! The only think I did was in "Code Completion" >> to move from NECController to NOCController to get the same as your >> screenshot. Should this be made the default one? >> >> Cheers, >> >> Offray >> >> El 16/03/15 a las 13:09, Esteban Lorenzano escribiÃ³: >>> >>>> On 16 Mar 2015, at 19:03, Offray Vladimir Luna CÃ¡rdenas >>>> <offray(a)riseup.net >>>> <mailto:offray@riseup.net>> wrote: >>>> >>>> >>>> >>>> El 16/03/15 a las 12:09, Esteban Lorenzano escribiÃ³: >>>> >>>> [...] >>>> >>>>>> 1. Proper tab-autocompletion: it works, but feels unresponsive >>>>>> compared with >>>>>> the one on Pharo 3. >>>>> >>>>> nothing changed there, so it is just your feeling :) >>>>> >>>>> Esteban >>>>> >>>> >>>> Well, is a feeling so objective that I can record a video of the two >>>> behaviours :). On Pharo 3 tab after writing some letters shows a >>>> list of >>>> possible options containing that letters, on Pharo 4, it inserts a >>>> tab, with >>>> no auto-completion at all :-/. >>> >>> check your settings, you should have something like this: >>> >>> >>> >>>> >>>> Cheers, >>>> >>>> Offray >>>> >>> >> >> >> > > >

March 16, 2015

Re: [Pharo-users] Error while loading GitFileTree in Pharo 4.0

by kilon alios

Oh boy ... If I try to install Smacc from configuraton browser it crashes the latest pharo 4 image on macos. On Mon, Mar 16, 2015 at 8:40 PM, Thierry Goubier <thierry.goubier(a)gmail.com> wrote: > Hi Kilon, > > like a monday :) > > I made a mistake in the configuration, and you are apparently the first > one to try the stable version of SmaCC. It's just an error in the url. I > have uploaded a new version of the configuration. > > Note to the SmaCC users at a certain place... I'm not sure I'll maintain > SmaCC v1 for Pharo 4, so it could be appropriate to think about pushing > your parsers to the new version, no? > > Thierry > > Le 16/03/2015 19:18, kilon alios a Ã©crit : > >> Thierry this is not your lucky week , Smacc is also fails to load from >> Configuration Browser with PrimitiveFailed: primitive #basicNew: in >> ByteString class failed >> > > Snip ... > >

March 16, 2015

Re: [Pharo-users] Pharo 4 - current state?

by Offray Vladimir Luna CÃ¡rdenas

The only preference I can't find is the one which makes Control + arrow key move/select words, like is usual on most programs. Should I fill a bug report about enabling this preference? Cheers, Offray El 16/03/15 a las 13:48, Offray Vladimir Luna CÃ¡rdenas escribiÃ³: > Thanks Esteban it worked! The only think I did was in "Code Completion" > to move from NECController to NOCController to get the same as your > screenshot. Should this be made the default one? > > Cheers, > > Offray > > El 16/03/15 a las 13:09, Esteban Lorenzano escribiÃ³: >> >>> On 16 Mar 2015, at 19:03, Offray Vladimir Luna CÃ¡rdenas >>> <offray(a)riseup.net >>> <mailto:offray@riseup.net>> wrote: >>> >>> >>> >>> El 16/03/15 a las 12:09, Esteban Lorenzano escribiÃ³: >>> >>> [...] >>> >>>>> 1. Proper tab-autocompletion: it works, but feels unresponsive >>>>> compared with >>>>> the one on Pharo 3. >>>> >>>> nothing changed there, so it is just your feeling :) >>>> >>>> Esteban >>>> >>> >>> Well, is a feeling so objective that I can record a video of the two >>> behaviours :). On Pharo 3 tab after writing some letters shows a list of >>> possible options containing that letters, on Pharo 4, it inserts a >>> tab, with >>> no auto-completion at all :-/. >> >> check your settings, you should have something like this: >> >> >> >>> >>> Cheers, >>> >>> Offray >>> >> > > >

March 16, 2015