- Pharo-users - lists.pharo.org

Re: [Pharo-users] Git overriding repo load from different source

by Peter UhnÃ¡k

On Sun, Mar 22, 2015 at 11:19 PM, Dale Henrichs < dale.henrichs(a)gemtalksystems.com> wrote: > I keep an eye out for posts with Metacello in the subject line so I missed > this one ... > I'll keep that in mind next time. > If so then the trick is to use the Metacello `lock` ... Do the following > BEFORE loading the project that depends upon you sample project: > Combined with onConflict: mentioned by Thierry this works like a charm, thanks a lot. :) > (a Warning is dumped to the transcript) ... > I got a warning prompt which I had confirm ("proceed") couple of times, but that's just a detail. Thanks a lot! Peter

March 25, 2015

Re: [Pharo-users] Git overriding repo load from different source

by Peter UhnÃ¡k

> > I'm not sure how to answer all those cases Those were just options that came to my mind how to solve it - practically just one is needed. > (did I remember a conversation during PharoDays?). > We spoke only very briefly about something else since I didn't use Git at the time yet. > Can you elaborate on a) and the failure? Because I remember looking at the > ability to override conflicts in Metacello by just saying: onConflict: [:ex > | ex allow ] > Yes, onConflict: solves the overriding issue, thanks! Peter

March 25, 2015

Re: [Pharo-users] XClipboard

by Julien Delplanque

Ho thanks for pointing me this solution it works well. I will use it because I don't like the fact I had to touch to the System for my solution. You're saving me from a lot of Chromium->Sublime Text, Sublime Text->Pharo :) Thank you once again! Julien On 24/03/15 21:30, Peter UhnÃ¡k wrote: > Hi, > > this is brutal indeed; have you tried the previously mentioned workaround > with setting the encoding: > http://forum.world.st/Pharo-and-X11-primary-selection-aka-middle-mouse-butt… > > Interestingly enough I posted an answer to the original (your) thread but > somehow it created a new one instead. > http://forum.world.st/Re-Copy-past-doesn-t-work-sometimes-in-Chrome-semifix… > > I saw that it's possible to get the content of x11 clipboard in C using >> x11 libs > That's what the VM does inside (there's a link to the VM code in the first > link above). > > Peter >

March 25, 2015

Re: [Pharo-users] Starting with Pharo Issue Tracker

by Ben Coman

On Wed, Mar 25, 2015 at 2:33 AM, Peter UhnÃ¡k <i.uhnak(a)gmail.com> wrote: > http://pharo.org/contribute-propose-fix Thats great Jigyasa. Always good to have more contributors. Now for those of us who have been doing it a while, it is not always obvious where there are gaps to get new people started off. So please ask plenty of question if you get stuck. Is your question that you don't have a particular bug to work on and would like a suggestion? * Check that reported bugs include have suitable steps-to-reproduce. If not, then ask the submitter for more details and report on the issue if you are able to reproduce it. * Start by reviewing other people fixes. Sometimes these are in deep places that are daunting at first, but I learnt an immense amount doing this when I started, and continue to do so. Do the first step of merging in a SLICE from the Pharo4Inbox (soon to be Pharo5Inbox) but don't complete it - keep it as a reference. Open the Inbox again and do the merge for real. Then throw a few halts into the modified methods and try to reproduce the bug. You learn Pharo best by watching it run, not just looking at code. * In an image without the bug fix, put halts in the same methods, then single step both images in sync until you can observe differences - and that is where you learn the most. Tip: At the link above, where it says... "Take the latest stable or latest development system, ideally using the latest virtual machine (check the _downloads_)" - I'd suggest using PharoLauncher ( http://www.smalltalkhub.com/#!/~Pharo/PharoLauncher) which makes it very easy to grab the latest build. cheers -ben

March 24, 2015

Re: [Pharo-users] Code to create a repository

by Bernardo Ezequiel Contreras

i used to do this | myRepo myRepoDir | myRepoDir := FileDirectory on:'/home/vonbecmann/repo'. myRepo := MCDirectoryRepository new directory: myRepoDir. MCRepositoryGroup default addRepository: myRepo. in order to add my directory repository. "Ken G. Brown's idea" All in one go if you like: MCRepositoryGroup default addRepository: (MCDirectoryRepository new directory: (FileDirectory on: '/myLocalMCRepositoryPath/MyPackage/')). "Hernan Durand's idea" | repositories | repositories := MCRepositoryGroup default. { (MCHttpRepository location: 'http://www.squeaksource.com/Phantasia' user: '' password: ''). (MCHttpRepository location: 'http://www.squeaksource.com/SmallFaces' user: '' password: ''). } do: [ : aRepository | repositories addRepository: aRepository ] And if you read this article https://pharoweekly.wordpress.com/2014/07/26/a-pharolauncher-lover/ in the script part there are some useful ways to set the username and password. Regards On Tue, Mar 24, 2015 at 6:52 PM, Jan B. <bliznjan(a)fit.cvut.cz> wrote: > Hello > > I would like to ask how to simply add a repository into monticello without > using monticello GUI's button +Repository, but by code. > If I'm loading baseline or configuration via Gofer or Metacello, it creates > repository automatically, but I don't want to load anything, what I need is > just something like... > Metacello new repository: 'filetree:///aPath'; create. > What is the correct command? > > Jan > > > > -- > View this message in context: > http://forum.world.st/Code-to-create-a-repository-tp4814923.html > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > > -- Bernardo E.C. Sent from a cheap desktop computer in South America.

March 24, 2015

Re: [Pharo-users] Code to create a repository

by Sean P. DeNigris

Jan B. wrote > I would like to ask how to simply add a repository into monticello without > using monticello GUI's button +Repository, but by code. | repo | repo := MCHttpRepository "or appropriate subclass" location: url asString. MCRepositoryGroup default addRepository: repo ----- Cheers, Sean -- View this message in context: http://forum.world.st/Code-to-create-a-repository-tp4814923p4814930.html Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

March 24, 2015

Code to create a repository

by Jan B.

Hello I would like to ask how to simply add a repository into monticello without using monticello GUI's button +Repository, but by code. If I'm loading baseline or configuration via Gofer or Metacello, it creates repository automatically, but I don't want to load anything, what I need is just something like... Metacello new repository: 'filetree:///aPath'; create. What is the correct command? Jan -- View this message in context: http://forum.world.st/Code-to-create-a-repository-tp4814923.html Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

March 24, 2015

Re: [Pharo-users] XClipboard

by Peter UhnÃ¡k

Hi, this is brutal indeed; have you tried the previously mentioned workaround with setting the encoding: http://forum.world.st/Pharo-and-X11-primary-selection-aka-middle-mouse-butt… Interestingly enough I posted an answer to the original (your) thread but somehow it created a new one instead. http://forum.world.st/Re-Copy-past-doesn-t-work-sometimes-in-Chrome-semifix… I saw that it's possible to get the content of x11 clipboard in C using > x11 libs That's what the VM does inside (there's a link to the VM code in the first link above). Peter

March 24, 2015

Re: [Pharo-users] Settings browser

by Alain Plantec

Hello Hilaire, you do it but not with a pickOne list. Yes I know it would be very cool to be able to do with a pickOne. Have a look at the setting chapter (The Setting Framework) https://ci.inria.fr/pharo-contribution/view/Books/job/DeepIntoPharo/ At the end of the chapter I explained how to extend the setting browser. You will see how to implement this preference setting: Cheers Alain > Le 24 mars 2015 Ã 20:39, Hilaire <hilaire(a)drgeo.eu> a Ã©crit : > > Le 24/03/2015 18:30, Peter UhnÃ¡k a Ã©crit : >> take a look at WidgetExamples class>>exampleBasicControls >> one of the inputs is a morph drop list. >> > > Hi Peter, I know but my question is about using such morph drop list > from the Settings browser. > > Hilaire > > -- > Dr. Geo - http://drgeo.eu > iStoa - http://istoa.drgeo.eu > > >

March 24, 2015

XClipboard

by Julien Delplanque

Hi everyone, I already send a mail here about my copy/paste that doesn't work between Chromium and Pharo3/4. Since I use more and more Pharo and I don't want to move from Chromium, I tried to find a solution to my problem and so I did. Ok, I must admit, it's brutal but I managed to get the content from the clipboard (after copying something from chromium) using 'xclip -o' with PipeableOSProcess help. So I looked at Clipboard>>clipboardText | string decodedString | string := self primitiveClipboardText. (string isEmpty or: [string = contents asString]) ifTrue: [^ contents]. decodedString := string convertFromWithConverter: UTF8TextConverter new. decodedString := decodedString replaceAll: 10 asCharacter with: 13 asCharacter. ^ decodedString = contents asString ifTrue: [contents] ifFalse: [decodedString asText]. and overrided it in UnixClipboard>>clipboardText as follow: UnixClipboard>>clipboardText | string decodedString | string := (PipeableOSProcess command: '/usr/bin/xclip -o') output. decodedString := string convertFromWithConverter: UTF8TextConverter new. decodedString := decodedString replaceAll: 10 asCharacter with: 13 asCharacter. ^ decodedString = contents asString ifTrue: [contents] ifFalse: [decodedString asText]. This trick works pretty well for me even if I'm sure it's not the best way to do it. I saw that it's possible to get the content of x11 clipboard in C using x11 libs but I think it would be a waste of time to implement it and then call C code from Pharo since I think the way I did it is fast enough. So that's why I choose this quick solution. Anyway, I send this mail to inform that I made with this called XClipboard, simply load it with: Gofer new url: 'http://smalltalkhub.com/mc/JulienDelplanque/XClipboard/main'; package: #ConfigurationOfXClipboard; load. ConfigurationOfXClipboard loadDevelopment. if you want to look at it. What do you think about it? Is there a better way to do that easily? Does anyone see a problem with this "quick fix"? As I said for me it works well for the moment but I can't be certain it will in any case. Thanks in advance, Julien

March 24, 2015