- Pharo-users - lists.pharo.org

Re: [Pharo-users] GitFileTree on Pharo 5.0

by Trussardi Dario Romano

Thanks Dimitris, > > > On Tue, Dec 6, 2016 at 8:46 PM Dimitris Chloupis <kilon.alios(a)gmail.com> wrote: > because you run a very old macos version it may be possible that because Cairo lib has been compiled for more recent macos that this is the source of your problems. > > Try the following commands from inside the folder you installed pharo following my previous instructions The > otool -L ./pharo-vm/Pharo.app/Contents/MacOS/Plugins/libcairo.2.dylib Answer: ./pharo-vm/Pharo.app/Contents/MacOS/Plugins/libcairo.2.dylib: @executable_path/Plugins/libcairo.2.dylib (compatibility version 11203.0.0, current version 11203.14.0) @executable_path/Plugins/libpixman-1.0.dylib (compatibility version 27.0.0, current version 27.0.0) @executable_path/Plugins/libfreetype.6.dylib (compatibility version 15.0.0, current version 15.1.0) @executable_path/Plugins/libpng12.0.dylib (compatibility version 50.0.0, current version 50.0.0) /usr/lib/libz.1.dylib (compatibility version 1.0.0, current version 1.2.5) /System/Library/Frameworks/ApplicationServices.framework/Versions/A/ApplicationServices (compatibility version 1.0.0, current version 48.0.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 1225.1.1) /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation (compatibility version 150.0.0, current version 1253.0.0) /System/Library/Frameworks/CoreGraphics.framework/Versions/A/CoreGraphics (compatibility version 64.0.0, current version 600.0.0) > > This command will print the dependencies of the library and whether your OS libraries are enough to support this library. If one dependency fail then the whole library may fail. > > In that case you will need to locate a build for Cairo for the version of MacOS you are using and replace the dylib file or build it yourself, Without load anything the VGTigerDemo runDemo report into the error debug and into relative terminal ( where a launch the pharo ): dtr$ ./pharo-ui Pharo.image Error: External module not found ExternalLibraryFunction(Object)>>error: ExternalLibraryFunction(Object)>>externalCallFailed ExternalLibraryFunction(ExternalFunction)>>invokeWithArguments: AthensCairoSurface class>>primImage:width:height: FFICalloutAPI>>function:module: AthensCairoSurface class(Object)>>nbCall: AthensCairoSurface class>>primImage:width:height: AthensCairoSurface class>>extent:format: AthensCairoSurface class>>extent: VGTigerDemo>>initialize VGTigerDemo class(Behavior)>>new VGTigerDemo class>>runDemo > > As you may imagine its very difficult for us to continue supporting very old OS , because we are a small community. I do not want to bother. Just see if the issue is resolved on my system, or whether to postpone everything when update the operating system. But the gitFileTree support would be very useful to continue in a certain direction. Cheers, Dario

Dec. 6, 2016

Re: [Pharo-users] GitFileTree on Pharo 5.0

by Dimitris Chloupis

On Tue, Dec 6, 2016 at 8:46 PM Dimitris Chloupis <kilon.alios(a)gmail.com> wrote: > because you run a very old macos version it may be possible that because > Cairo lib has been compiled for more recent macos that this is the source > of your problems. > Try the following commands from inside the folder you installed pharo following my previous instructions otool -L ./pharo-vm/Pharo.app/Contents/MacOS/Plugins/libcairo.2.dylib This command will print the dependencies of the library and whether your OS libraries are enough to support this library. If one dependency fail then the whole library may fail. In that case you will need to locate a build for Cairo for the version of MacOS you are using and replace the dylib file or build it yourself, As you may imagine its very difficult for us to continue supporting very old OS , because we are a small community.

Dec. 6, 2016

Re: [Pharo-users] GitFileTree on Pharo 5.0

by Dimitris Chloupis

because you run a very old macos version it may be possible that because Cairo lib has been compiled for more recent macos that this is the source of your problems. But I already told you to test Athens without installing anything including Roassal to be certain that this is actually a cairo problem. On Tue, Dec 6, 2016 at 4:10 PM Trussardi Dario Romano < dario.trussardi(a)tiscali.it> wrote: > Ciao, > > from terminal i create a /opt/pharo folder and run your command. > > If you go to the applications there is a folder called Utilities and > inside it there is a terminal application open it and issue the following > commands > > mkdir pharo > cd pharo > curl get.pharo.org | bash > ./pharo-ui Pharo.image > > First command will make folder, second will enter the folder, third will > dowload the standard stable version of pharo to the folder, foruth will > launch pharo. > > Then when pharo opens > > the Pharo is right open > > follow the instruction Esteban gave you to test that Athens works as it > should. > > > The Roassal2 is not load in the image. > > I load it from Pharo Project Catalog. > > I select the Roassal2 project and do the Install stable version. > > ( a this point i have a strange dialog behaviour : > > when the system open a dialog with: > > Question > > Roassal2 has not been marked as tested for Pharo5.0! > > Do you want to continue (installation could fail )? > > when i i select the yes or no button the dialog with the same question is > often redispaly. ) > > Do not install anything before testings. Then if everything works proceed > and install one thing, only, then test it, then install the next one etc. > > > After install the Roassal2 like above and do the VGTigerDemo runDemo > > answer the same error: > > ExternalLibraryFunction(Object)>>error: > > ExternalLibraryFunction(Object)>>externalCallFailed > > ExternalLibraryFunction(ExternalFunction)>>invokeWithArguments: > > AthensCairoSurface class>>primImage:width:height: > > AthensCairoSurface class>>extent:format: > > AthensCairoSurface class>>extent: > > VGTigerDemo>>initialize > > VGTigerDemo class(Behavior)>>new > > VGTigerDemo class>>runDemo > > Thanks, > > Dario > > Moving step by step will help us pin point your problem > > I suspect maybe something went crazy , it happens from time to time in > pharo, recently I had a nasty corruption with Pharo 6. If it happens once, > its ok , if it happens frequently its a problem. > > > On Mon, Dec 5, 2016 at 6:35 PM Trussardi Dario Romano < > dario.trussardi(a)tiscali.it> wrote: > > Ciao, > > Pharo is unable to access a library it needs; this is the native boost > plugin which is normally bundled with it (and the cairo lib?)... > > Guys, anybody with a mac around there? > > Thierry > > > > > thanks Dimitris. > > Nativeboost has been removed and been replaced by UFFI, all libraries that > used Nativeboost are now using UFFI including the Cairo backend library for > Athens. > > > OK, but what i need to do for load UFFI Cairo library > > and for load the UFFI library required by GitFileTree Pharo support? > > > I wrong to install Pharo 5.0 on my MacBookPro with OS X 10.7.5. ? > > If right remember i install Pharo 5.0 from http://pharo.org/download > link > > > Thanks. > Dario > > >

Dec. 6, 2016

Re: [Pharo-users] Execute Tet pdflib

by pauguillot＠girona.com

Ok, that's the best that i can do. -Pau |bin pdf pdfAsText result| bin := '"C:\Program Files\PDFlib\TET 5.0 64-bit\bin\tet.exe"'. pdf := '"C:\*\document.pdf"'. pdfAsText := 'C:\*\document.txt' asFileReference. OS2Process command: bin, ' --samedir ', pdf. [ pdfAsText exists ] whileFalse: [ (Delay forMilliseconds: 1) wait ]. (Delay forMilliseconds: 300) wait. result := pdfAsText contents. pdfAsText delete. result A 2016-12-06 00:43, Ben Coman escriguÃ©: > On Tue, Dec 6, 2016 at 4:28 AM, <pauguillot(a)girona.com> wrote: >> Hello, >> >> 1- I need help to extract a selected text from a pdf document. >> Tet pdflib can do that and i need help to execute command line using >> Pharo. >> I am able to do the work using a bat file but i think we can do >> better. > > Someone else will need ot help for that. > >> >> 2- How we can code properly the delay (when we wait the Bat file) > > Can you expand on the problem. > "(Delay forMilliseconds: 500)wait." looks fine to me. > > cheers -ben > > >> >> Thank you for your help. >> >> >> https://www.pdflib.com/products/tet/ >> >> |bat pdf stream pdfAsText contents | >> bat := 'C:\some\code.bat'. >> pdf := 'C:\some\document.pdf'. >> stream := bat asFileReference writeStream. >> >> "Console Windows code" >> stream nextPutAll: 'CD "C:\Program Files\PDFlib\TET 5.0 >> 64-bit\bin"'; >> nextPut: Character linefeed; >> nextPutAll: 'TET --samedir --lastpage last-1 --pageopt >> "includebox={ >> {98.38 693.32 253.41 709.91} {522.70 183.66 595 226.30} {416.97 >> 574.79 479 >> 598.03} {401.33 773.91 453 789.55} {294.18 575.74 369.56 598.5} >> {295.6 492.3 >> 373.35 524.43} {150.53 414.55 219.28 438.25} {47.17 494.67 98.85 >> 520.75} >> {112.26 684.01 193.66 698.03} {533.61 212.57 595 620} {100.75 657.29 >> 217.85 >> 673.41}}"'; >> nextPut: Character space; >> nextPutAll: pdf; >> nextPut: Character linefeed; >> nextPutAll: 'EXIT'; >> close. >> OS2Process command: bat. >> >> pdfAsText := String streamContents: [ :s | 1 to: (pdf size - 4) do: [ >> :i | s >> nextPut: (pdf at: i) ]. s nextPutAll: '.txt'; close ]. >> "C:\some\document.txt" >> (Delay forMilliseconds: 500)wait. >> contents := pdfAsText asFileReference contents. >> bat asFileReference delete. >> pdfAsText asFileReference delete. >> contents >> >> ================================================================ >> Missatge enviat a travÃ©s del Webmail de Girona.com >> http://www.girona.com >> ================================================================ >> >> ================================================================ Missatge enviat a travÃ©s del Webmail de Girona.com http://www.girona.com ================================================================

Dec. 6, 2016

Re: [Pharo-users] GitFileTree on Pharo 5.0

by Trussardi Dario Romano

Ciao, > I run Pharo 5.0 with no problems on a Macbook Pro, but itâs running OS X v. 10.12.1. Any reason your OS is backdated? i have a MacBookPro with OS X 10.7.5. with much work on it. The upgrade to a the last supported OS X on my book ( 10.11.6 ) is very problematic because with the upgrade the system can't restart, and consequently I should reformat the disk. This is no time for such risk. Cheers, Dario > > Andrew Glynn > > From: Pharo-users <pharo-users-bounces(a)lists.pharo.org> on behalf of Trussardi Dario Romano <dario.trussardi(a)tiscali.it> > Reply-To: Any question about pharo is welcome <pharo-users(a)lists.pharo.org> > Date: Monday, December 5, 2016 at 11:34 AM > To: Any question about pharo is welcome <pharo-users(a)lists.pharo.org> > Subject: Re: [Pharo-users] GitFileTree on Pharo 5.0 > > Ciao, > > >>> Pharo is unable to access a library it needs; this is the native boost plugin which is normally bundled with it (and the cairo lib?)... >>> >>> Guys, anybody with a mac around there? >>> >>> Thierry >> >> > > thanks Dimitris. > > >> Nativeboost has been removed and been replaced by UFFI, all libraries that used Nativeboost are now using UFFI including the Cairo backend library for Athens. > > OK, but what i need to do for load UFFI Cairo library > > and for load the UFFI library required by GitFileTree Pharo support? > > > I wrong to install Pharo 5.0 on my MacBookPro with OS X 10.7.5. ? > > If right remember i install Pharo 5.0 from http://pharo.org/download link > > > Thanks. > > Dario

Dec. 6, 2016

Re: [Pharo-users] GitFileTree on Pharo 5.0

by Trussardi Dario Romano

Ciao, from terminal i create a /opt/pharo folder and run your command. > If you go to the applications there is a folder called Utilities and inside it there is a terminal application open it and issue the following commands > > mkdir pharo > cd pharo > curl get.pharo.org | bash > ./pharo-ui Pharo.image > > First command will make folder, second will enter the folder, third will dowload the standard stable version of pharo to the folder, foruth will launch pharo. > > Then when pharo opens the Pharo is right open > follow the instruction Esteban gave you to test that Athens works as it should. The Roassal2 is not load in the image. I load it from Pharo Project Catalog. I select the Roassal2 project and do the Install stable version. ( a this point i have a strange dialog behaviour : when the system open a dialog with: Question Roassal2 has not been marked as tested for Pharo5.0! Do you want to continue (installation could fail )? when i i select the yes or no button the dialog with the same question is often redispaly. ) > Do not install anything before testings. Then if everything works proceed and install one thing, only, then test it, then install the next one etc. After install the Roassal2 like above and do the VGTigerDemo runDemo answer the same error: ExternalLibraryFunction(Object)>>error: ExternalLibraryFunction(Object)>>externalCallFailed ExternalLibraryFunction(ExternalFunction)>>invokeWithArguments: AthensCairoSurface class>>primImage:width:height: AthensCairoSurface class>>extent:format: AthensCairoSurface class>>extent: VGTigerDemo>>initialize VGTigerDemo class(Behavior)>>new VGTigerDemo class>>runDemo Thanks, Dario > Moving step by step will help us pin point your problem > > I suspect maybe something went crazy , it happens from time to time in pharo, recently I had a nasty corruption with Pharo 6. If it happens once, its ok , if it happens frequently its a problem. > > > On Mon, Dec 5, 2016 at 6:35 PM Trussardi Dario Romano <dario.trussardi(a)tiscali.it> wrote: > Ciao, > >> Pharo is unable to access a library it needs; this is the native boost plugin which is normally bundled with it (and the cairo lib?)... >> >> Guys, anybody with a mac around there? >> >> Thierry >> >> > > thanks Dimitris. > >> Nativeboost has been removed and been replaced by UFFI, all libraries that used Nativeboost are now using UFFI including the Cairo backend library for Athens. > > OK, but what i need to do for load UFFI Cairo library > > and for load the UFFI library required by GitFileTree Pharo support? > > > I wrong to install Pharo 5.0 on my MacBookPro with OS X 10.7.5. ? > > If right remember i install Pharo 5.0 from http://pharo.org/download link > > > Thanks. > > Dario

Dec. 6, 2016

Re: [Pharo-users] GitFileTree on Pharo 5.0

by Trussardi Dario Romano

Ciao Ben, > hi Dario, > > Reading back through the thread, it seems it works when you start > Pharo one way, but not another way. > Can you report the VM versions for each way.. > World menu > System > System Reporter > VM GeneralImage In the first case ( from Pharo on desktop ): ----- /Users/dtr/Desktop/Pharo5.0.app/Contents/Resources/Pharo5.0.image Pharo5.0 Latest update: #50763 Unnamed Virtual Machine --------------- /Users/dtr/Desktop/Pharo5.0.app/Contents/MacOS/Pharo CoInterpreter VMMaker.oscog-HolgerHansPeterFreyther.1880 uuid: 16138eb3-2390-40f5-a6c8-15f0494936f8 Oct 10 2016 StackToRegisterMappingCogit VMMaker.oscog-HolgerHansPeterFreyther.1880 uuid: 16138eb3-2390-40f5-a6c8-15f0494936f8 Oct 10 2016 git@github.com:pharo-project/pharo-vm.git Commit: 06744effac0f0aa3b4b32e17636448f9d51d6707 Date: 2016-09-30 08:40:43 +0200 By: GitHub <noreply(a)github.com> Mac Cocoa Cog 5.8b12 21-Sep-10 >1B0534FA-246C-47C5-AB29-7A76C81CCDCB< VMMaker versionString git@github.com:pharo-project/pharo-vm.git Commit: 06744effac0f0aa3b4b32e17636448f9d51d6707 Date: 2016-09-30 08:40:43 +0200 By: GitHub <noreply(a)github.com> CoInterpreter VMMaker.oscog-HolgerHansPeterFreyther.1880 uuid: 16138eb3-2390-40f5-a6c8-15f0494936f8 Oct 10 2016 StackToRegisterMappingCogit VMMaker.oscog-HolgerHansPeterFreyther.1880 uuid: 16138eb3-2390-40f5-a6c8-15f0494936f8 Oct 10 2016 In the second case ( a specific image into package ) Image ----- /Users/dtr/Desktop/Pharo5.0.app/Contents/Resources/Pharo5.0-161205.image Pharo5.0 Latest update: #50763 Unnamed Virtual Machine --------------- /Users/dtr/Desktop/Pharo5.0.app/Contents/MacOS/Pharo CoInterpreter VMMaker.oscog-HolgerHansPeterFreyther.1880 uuid: 16138eb3-2390-40f5-a6c8-15f0494936f8 Oct 10 2016 StackToRegisterMappingCogit VMMaker.oscog-HolgerHansPeterFreyther.1880 uuid: 16138eb3-2390-40f5-a6c8-15f0494936f8 Oct 10 2016 git@github.com:pharo-project/pharo-vm.git Commit: 06744effac0f0aa3b4b32e17636448f9d51d6707 Date: 2016-09-30 08:40:43 +0200 By: GitHub <noreply(a)github.com> Mac Cocoa Cog 5.8b12 21-Sep-10 >1B0534FA-246C-47C5-AB29-7A76C81CCDCB< VMMaker versionString git@github.com:pharo-project/pharo-vm.git Commit: 06744effac0f0aa3b4b32e17636448f9d51d6707 Date: 2016-09-30 08:40:43 +0200 By: GitHub <noreply(a)github.com> CoInterpreter VMMaker.oscog-HolgerHansPeterFreyther.1880 uuid: 16138eb3-2390-40f5-a6c8-15f0494936f8 Oct 10 2016 StackToRegisterMappingCogit VMMaker.oscog-HolgerHansPeterFreyther.1880 uuid: 16138eb3-2390-40f5-a6c8-15f0494936f8 Oct 10 2016 In a new Pharo 5.0 folder ( following Dimitris command : mkdir pharo cd pharo curl get.pharo.org | bash ./pharo-ui Pharo.image ) Image ----- /opt/pharo/Pharo.image Pharo5.0 Latest update: #50764 Unnamed Virtual Machine --------------- /opt/pharo/pharo-vm/Pharo.app/Contents/MacOS/Pharo CoInterpreter VMMaker.oscog-HolgerHansPeterFreyther.1880 uuid: 16138eb3-2390-40f5-a6c8-15f0494936f8 Oct 10 2016 StackToRegisterMappingCogit VMMaker.oscog-HolgerHansPeterFreyther.1880 uuid: 16138eb3-2390-40f5-a6c8-15f0494936f8 Oct 10 2016 git@github.com:pharo-project/pharo-vm.git Commit: 06744effac0f0aa3b4b32e17636448f9d51d6707 Date: 2016-09-30 08:40:43 +0200 By: GitHub <noreply(a)github.com> Mac Cocoa Cog 5.8b12 21-Sep-10 >1B0534FA-246C-47C5-AB29-7A76C81CCDCB< VMMaker versionString git@github.com:pharo-project/pharo-vm.git Commit: 06744effac0f0aa3b4b32e17636448f9d51d6707 Date: 2016-09-30 08:40:43 +0200 By: GitHub <noreply(a)github.com> CoInterpreter VMMaker.oscog-HolgerHansPeterFreyther.1880 uuid: 16138eb3-2390-40f5-a6c8-15f0494936f8 Oct 10 2016 StackToRegisterMappingCogit VMMaker.oscog-HolgerHansPeterFreyther.1880 uuid: 16138eb3-2390-40f5-a6c8-15f0494936f8 Oct 10 2016 > > Is one of those ways you start Pharo is using Pharo Launcher? No, i use Pharo Launcher only for Pharo 4.0. Not for Pharo 5.0 Thanks, Dario > In the settings you can point it to a new VM you download. > > cheers -ben > > On Tue, Dec 6, 2016 at 2:16 AM, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: >> >>> On 5 Dec 2016, at 19:05, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: >>> >>> Yes, try this, I think you might be using the wrong VM. >> >> yes :) >> >>> >>>> On 5 Dec 2016, at 18:41, Dimitris Chloupis <kilon.alios(a)gmail.com> wrote: >>>> >>>> If you go to the applications there is a folder called Utilities and inside it there is a terminal application open it and issue the following commands >>>> >>>> mkdir pharo >>>> cd pharo >>>> curl get.pharo.org | bash >>>> ./pharo-ui Pharo.image >>>> >>>> First command will make folder, second will enter the folder, third will dowload the standard stable version of pharo to the folder, foruth will launch pharo. >>>> >>>> Then when pharo opens follow the instruction Esteban gave you to test that Athens works as it should. Do not install anything before testings. Then if everything works proceed and install one thing, only, then test it, then install the next one etc. >>>> >>>> Moving step by step will help us pin point your problem >>>> >>>> I suspect maybe something went crazy , it happens from time to time in pharo, recently I had a nasty corruption with Pharo 6. If it happens once, its ok , if it happens frequently its a problem. >>>> >>>> >>>> On Mon, Dec 5, 2016 at 6:35 PM Trussardi Dario Romano <dario.trussardi(a)tiscali.it> wrote: >>>> Ciao, >>>> >>>>> Pharo is unable to access a library it needs; this is the native boost plugin which is normally bundled with it (and the cairo lib?)... >>>>> >>>>> Guys, anybody with a mac around there? >>>>> >>>>> Thierry >>>>> >>>>> >>>> >>>> thanks Dimitris. >>>> >>>>> Nativeboost has been removed and been replaced by UFFI, all libraries that used Nativeboost are now using UFFI including the Cairo backend library for Athens. >>>> >>>> OK, but what i need to do for load UFFI Cairo library >>>> >>>> and for load the UFFI library required by GitFileTree Pharo support? >>>> >>>> >>>> I wrong to install Pharo 5.0 on my MacBookPro with OS X 10.7.5. ? >>>> >>>> If right remember i install Pharo 5.0 from http://pharo.org/download link >>>> >>>> >>>> Thanks. >>>> >>>> Dario >>> >>> >> >> >

Dec. 6, 2016

Re: [Pharo-users] Debugger and stepping over a function that will have a DNU

by Marcus Denker

> On 6 Dec 2016, at 07:10, Marcus Denker <marcus.denker(a)inria.fr> wrote: > > >> On 5 Dec 2016, at 19:10, Holger Freyther <holger(a)freyther.de> wrote: >> >> >>> On 05 Dec 2016, at 13:03, Denis Kudriashov <dionisiydk(a)gmail.com> wrote: >>> >>> >> >> Dear Denis, >> >> >>> It was fixed here 16877 and here 19108. (last allows interrupt in such cases) >> >> is this in Pharo5 or will it show up in Pharo5? >> > > These are good candidates for back porting. I will put it on my TODO. I added an issue to not forget: https://pharo.fogbugz.com/f/cases/19424/Backport-Debugger-step-fixes-to-Pha… <https://pharo.fogbugz.com/f/cases/19424/Backport-Debugger-step-fixes-to-Pha…> Marcus

Dec. 6, 2016

Re: [Pharo-users] Debugger and stepping over a function that will have a DNU

by Denis Kudriashov

2016-12-05 23:10 GMT+01:00 Holger Freyther <holger(a)freyther.de>: > > It was fixed here 16877 and here 19108. (last allows interrupt in such > cases) > > is this in Pharo5 or will it show up in Pharo5? It was fixed only in Pharo 6. it should be mentioned in issue parameters

Dec. 6, 2016

Re: [Pharo-users] Mustache and section

by Damien Pollet

https://github.com/zalando/beard is in Scala :p On 5 December 2016 at 21:54, Stephane Ducasse <stepharo.self(a)gmail.com> wrote: > You mean that you would like to invent a much better mustache. > We could keep mustache as it is and invent Beard or rouquaflette :) > > On Mon, Dec 5, 2016 at 12:35 PM, Norbert Hartl <norbert(a)hartl.name> wrote: > >> I agree. But there is also a point in sharing mustache templates between >> different runtimes. Altering mustache does not make it very mustache >> anymore. And it will make it slower. I put that on my ever growing list of >> things to do. Maybe a switch could bring the best of both worlds. >> >> Norbert >> >> Am 05.12.2016 um 16:24 schrieb Stephane Ducasse <stepharo.self(a)gmail.com >> >: >> >> having a nicer mustache can be cool :) >> >> On Mon, Dec 5, 2016 at 6:25 AM, Norbert Hartl <norbert(a)hartl.name> wrote: >> >>> Ok. I think about that again. It might be a useful thing to have >>> although not supported IMHO by other mustache implementations. >>> >>> Norbert >>> >>> > Am 04.12.2016 um 18:19 schrieb Hilaire <hilaire(a)drgeo.eu>: >>> > >>> > Okay. >>> > Indeed, my bypass was to copy the label in the list. >>> > >>> > Thank you for your answer. >>> > >>> > Hilaire >>> > >>> >> Le 04/12/2016 Ã 08:14, Norbert Hartl a Ã©crit : >>> >>>> So far in my attempt the #label tag is not processed. >>> >>>> >>> >>>> Am I interpreting something wrongly? >>> >>>> >>> >> No, what you want is not possible. To achieve it you should copy >>> label into the elements of the list section. >>> >> >>> >> Norbert >>> > >>> > -- >>> > Dr. Geo >>> > http://drgeo.eu >>> > >>> > >>> >>> >>> >> >

Dec. 6, 2016