- Pharo-users - lists.pharo.org

Re: [Pharo-users] 2 questions around gitlab, gitfiletree, BaselineOf

by Peter Uhnak

Hi, I had similar issues when using gitfiletree... and in the end I've ended up with this https://github.com/peteruhnak/pharo-scripts/blob/master/config/5.0/openponk… it is not the prettiest thing, however it is automated so I didn't bother improving it. * automatically loads GitFileTree (I also load my own shell, because OSProcess was failing on me hard) * "pre-loads" some dependencies so they point to my local git repositories instead of being pulled from github * if BaselineOf is available in the image, then MC loader will use that (instead of grabbing code from bitbucket/gitlab/github) * #onWarningLog is there to suppress warning about loading from different source (local instead of github), but avialble in transcript iirc * startup script, so I could name the image certain way and it will prepare it for me * (obviously one can use it separately) * used on windows and linux (that's why the platform checking) Peter On Fri, Jul 07, 2017 at 06:48:50AM -0700, Sabine Manaa wrote: > Hi, > > we have our own gitlab running now and I succeeded to move our code from > sthub to it. > I can push my new code into it from Pharo. All fine. > I also created a Baseline (based on my former configurationOf). > Loading the code from others (e.g. seaside) with this baseline is also fine. > > There are 2 Points where I am sure it could be better (it is worse) > 1) For loading my own code, I currently have a bad solution > It is in the postLoadBaseline and does this: > > | gitRepository | > gitRepository := MCFileTreeRepository new > directory: > '/Applications/Pharo5.0-7.app/Contents/Resources/spf-gitlab/repository' > asFileReference. > {'RKA24-Model' . 'RKA24-System' . 'RKA24-Translator' . 'RKA24-View' . > 'RKA24-Test' . 'RKA24-Report' . 'RKA24-Overwrites'} > do: [ :each | > Gofer it > repository: gitRepository; > package: each; > load ]. > > I would like to load it within my baseline like this below but I dont know > what to write in the fileTreeRepository method... > > baseline: spec > <baseline> > spec > for: #common > do: [ spec blessing: #baseline. > spec repository: ##self fileTreeRepository##. > "here I load all the the oher stuff" > spec > package: 'RKA24-Model'; > package: 'RKA24-System'; > package: 'RKA24-Translator'; > package: 'RKA24-View'; > package: 'RKA24-Test'; > package: 'RKA24-Report'; > package: 'RKA24-Overwrites' ] > > 2) Also, when I take a new Image, I have to do several steps > > load gitfiletree from catalog > add/open my gitfiletree repository from Monticello > load BaselineOfRKA24 manually with > (BaselineOfRKA24 project map at: 'baseline') load > > I think this is not the best way, I would like to make it right. > > Can anyone give me some hints how to improve this two steps? > I use Pharo 5 and I don't want to go to Pharo 6 right now. > I develop on mac and production server is on windows. > > Regards > Sabine > > > > > > -- > View this message in context: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp49… > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. >

July 7, 2017

Re: [Pharo-users] How to view hierarchy of multiple classes in a package?

by Denis Kudriashov

2017-07-07 17:52 GMT+02:00 Denis Kudriashov <dionisiydk(a)gmail.com>: > Hi Tim. > Just remembered this thread. > > In latest Calypso you are able select multiple classes and switch to > hierarchy. It will show "composite" hierarchy of all classes instead of > single one. > So if you select all classes (cmd+a) you will get desired behaviour, > Look: â

July 7, 2017

Re: [Pharo-users] How to view hierarchy of multiple classes in a package?

by Denis Kudriashov

Hi Tim. Just remembered this thread. In latest Calypso you are able select multiple classes and switch to hierarchy. It will show "composite" hierarchy of all classes instead of single one. So if you select all classes (cmd+a) you will get desired behaviour, 2016-12-27 17:44 GMT+01:00 Tim Mackinnon <tim(a)testit.works>: > Hi guys - I'm trying to get back into pharo, and check out the advances in > v5. > > Anyway, if I look at a package in the system browser, it shows me classes > in that package (i think my terminology is right here?). > > What confuses me, is his I can see the hire hybrid the classes in relation > to each other? The hier button just shows the hierarchy of the selected > class and not in relation to the others? > > I'm sure at some point pharo and squeak let you see the related > hierarchies of all the classes in the package didn't it? > > This is really useful to help understand the relationship between classes > and pure risky identify useful refactorings. > > I can't see how to do this in pharo anymore? > > Is this functionality that has been lost (which seems a shame)? Or am I > missing another useful browsers? > > Tim > > Sent from my iPhone > >

July 7, 2017

Re: [Pharo-users] Cannot keep image running.

by sergio ruiz

Yes! i tried just sending over a regular save..Â let me rebuilt it, and send the correct gig over.. thanks! On July 7, 2017 at 11:07:34 AM, Denis Kudriashov (dionisiydk(a)gmail.com) wrote: How you saved image?Â Doing it from remote playground will lead to such problem because evaluation expects result from server. And after restart server will try return it again.Â ---- peace, sergio photographer, journalist, visionary Public Key:Â http://bit.ly/29z9fG0 #BitMessageÂ BM-NBaswViL21xqgg9STRJjaJaUoyiNe2dV http://www.Village-Buzz.com http://www.ThoseOptimizeGuys.com http://www.coffee-black.com http://www.painlessfrugality.com http://www.twitter.com/sergio_101 http://www.facebook.com/sergio101

July 7, 2017

Re: [Pharo-users] Cannot keep image running.

by Denis Kudriashov

2017-07-07 15:58 GMT+02:00 sergio ruiz <sergio.rrd(a)gmail.com>: > Correct.. Ok. So server image was saved with running server, right? And actually it was saved with connected client. Error shows that after image was saved communication with client was continued. But when server restarts client is not connected to it and server signal timeout because no connection is available. How you saved image? Doing it from remote playground will lead to such problem because evaluation expects result from server. And after restart server will try return it again. To correctly save image evaluate "remotePharo saveImage" from local playground. It take care about such cases (it request server without waiting result).

July 7, 2017

Fwd: How does instant update work in Pharo?

by Offray Vladimir Luna CÃ¡rdenas

Hi, Grafoscopio brings inspiration from IPython/Jupyter[1][2], Leo and, of course, Pharo/Smalltalk (among others). Recently Edward Ream, the main force behind Leo, asked my about the internals of Pharo and I would like to give him a better answer that the one I gave[4] with pointers to detailed literature. [1] http://ipython.org/ [2] http://jupyter.org/ [3] http://leoeditor.com/ [4] https://groups.google.com/forum/#!topic/leo-editor/rYF21GxraT4 So, any details on the following question will be appreciated. Cheers, Offray -------- Forwarded Message -------- Subject: How does instant update work in Pharo? Date: Fri, 7 Jul 2017 03:23:21 -0700 (PDT) From: Edward K. Ream <edreamleo(a)gmail.com> Reply-To: leo-editor(a)googlegroups.com To: leo-editor <leo-editor(a)googlegroups.com> I'm beginning to wonder what the difference is between the Pharo way and #511: reload-leo command. <https://github.com/leo-editor/leo-editor/issues/511> How does Pharo handle changes in object format or methods? How does Pharo recover from crashes due to changed method signatures, invalid calls, etc? Edward -- You received this message because you are subscribed to the Google Groups "leo-editor" group. To unsubscribe from this group and stop receiving emails from it, send an email to leo-editor+unsubscribe(a)googlegroups.com <mailto:leo-editor+unsubscribe@googlegroups.com>. To post to this group, send email to leo-editor(a)googlegroups.com <mailto:leo-editor@googlegroups.com>. Visit this group at https://groups.google.com/group/leo-editor. For more options, visit https://groups.google.com/d/optout.

July 7, 2017

Re: [Pharo-users] 2 questions around gitlab, gitfiletree, BaselineOf

by Gabriel Cotelli

Hi Sabine, for your own baseline you don't need to specify a repository. Just load it with something like: Metacello new baseline: 'RLA24'; repository: 'filetree://disklocation/repository'; load: 'Group To Load' Also you can have local copies of your dependencies in case you don't want to use an internet connection for dowloading, just use the lock command of Metacello to "overwrite" the repository definitions. For example take a look at: https://gist.github.com/gcotelli/d4521656358786ae2aca12a70478980f Regards, Gabriel On Fri, Jul 7, 2017 at 10:48 AM, Sabine Manaa <manaa.sabine(a)gmail.com> wrote: > Hi, > > we have our own gitlab running now and I succeeded to move our code from > sthub to it. > I can push my new code into it from Pharo. All fine. > I also created a Baseline (based on my former configurationOf). > Loading the code from others (e.g. seaside) with this baseline is also > fine. > > There are 2 Points where I am sure it could be better (it is worse) > 1) For loading my own code, I currently have a bad solution > It is in the postLoadBaseline and does this: > > | gitRepository | > gitRepository := MCFileTreeRepository new > directory: > '/Applications/Pharo5.0-7.app/Contents/Resources/spf-gitlab/repository' > asFileReference. > {'RKA24-Model' . 'RKA24-System' . 'RKA24-Translator' . > 'RKA24-View' . > 'RKA24-Test' . 'RKA24-Report' . 'RKA24-Overwrites'} > do: [ :each | > Gofer it > repository: gitRepository; > package: each; > load ]. > > I would like to load it within my baseline like this below but I dont know > what to write in the fileTreeRepository method... > > baseline: spec > <baseline> > spec > for: #common > do: [ spec blessing: #baseline. > spec repository: ##self fileTreeRepository##. > "here I load all the the oher stuff" > spec > package: 'RKA24-Model'; > package: 'RKA24-System'; > package: 'RKA24-Translator'; > package: 'RKA24-View'; > package: 'RKA24-Test'; > package: 'RKA24-Report'; > package: 'RKA24-Overwrites' ] > > 2) Also, when I take a new Image, I have to do several steps > > load gitfiletree from catalog > add/open my gitfiletree repository from Monticello > load BaselineOfRKA24 manually with > (BaselineOfRKA24 project map at: 'baseline') load > > I think this is not the best way, I would like to make it right. > > Can anyone give me some hints how to improve this two steps? > I use Pharo 5 and I don't want to go to Pharo 6 right now. > I develop on mac and production server is on windows. > > Regards > Sabine > > > > > > -- > View this message in context: http://forum.world.st/2- > questions-around-gitlab-gitfiletree-BaselineOf-tp4953877.html > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > >

July 7, 2017

Re: [Pharo-users] 2 questions around gitlab, gitfiletree, BaselineOf

by Thierry Goubier

Hi Sabine, I have makefiles to do the sort of thing you describe automatically (build an image from local, git managed repositories) and a baseline: I write stuff like ./pharo-cli pharo/Pharo.image --no-default-preferences eval --save Metacello new baseline: \'MyProject\'\; repository:\'gitfiletree://`pwd`/../src/\'\; load (works once gitfiletree has been loaded) notice the `pwd` embedded in there which allows you to put your local git clone anywhere you like. One thing I can't do, however, is having a dependency in BaselineOfMyProject to a locally hosted project (say BaselineOfANiceLib stored in ~/Project2017/ClientX/) because when I write the baseline, I can't be sure where it will be on-disk. If you're ok with gitfiletree doing the clone from gitlab on its own, one could still write a direct access to your internal gitlab server, in the baseline of MyProject, like that: spec repository: 'gitfiletree:// gitlab.intra.example.com/ANiceLib:master/placeWhereAreThePackages'; The oldest such scripts I have are for Pharo3. Does that answer your questions ? Thierry 2017-07-07 15:48 GMT+02:00 Sabine Manaa <manaa.sabine(a)gmail.com>: > Hi, > > we have our own gitlab running now and I succeeded to move our code from > sthub to it. > I can push my new code into it from Pharo. All fine. > I also created a Baseline (based on my former configurationOf). > Loading the code from others (e.g. seaside) with this baseline is also > fine. > > There are 2 Points where I am sure it could be better (it is worse) > 1) For loading my own code, I currently have a bad solution > It is in the postLoadBaseline and does this: > > | gitRepository | > gitRepository := MCFileTreeRepository new > directory: > '/Applications/Pharo5.0-7.app/Contents/Resources/spf-gitlab/repository' > asFileReference. > {'RKA24-Model' . 'RKA24-System' . 'RKA24-Translator' . > 'RKA24-View' . > 'RKA24-Test' . 'RKA24-Report' . 'RKA24-Overwrites'} > do: [ :each | > Gofer it > repository: gitRepository; > package: each; > load ]. > > I would like to load it within my baseline like this below but I dont know > what to write in the fileTreeRepository method... > > baseline: spec > <baseline> > spec > for: #common > do: [ spec blessing: #baseline. > spec repository: ##self fileTreeRepository##. > "here I load all the the oher stuff" > spec > package: 'RKA24-Model'; > package: 'RKA24-System'; > package: 'RKA24-Translator'; > package: 'RKA24-View'; > package: 'RKA24-Test'; > package: 'RKA24-Report'; > package: 'RKA24-Overwrites' ] > > 2) Also, when I take a new Image, I have to do several steps > > load gitfiletree from catalog > add/open my gitfiletree repository from Monticello > load BaselineOfRKA24 manually with > (BaselineOfRKA24 project map at: 'baseline') load > > I think this is not the best way, I would like to make it right. > > Can anyone give me some hints how to improve this two steps? > I use Pharo 5 and I don't want to go to Pharo 6 right now. > I develop on mac and production server is on windows. > > Regards > Sabine > > > > > > -- > View this message in context: http://forum.world.st/2- > questions-around-gitlab-gitfiletree-BaselineOf-tp4953877.html > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > >

July 7, 2017

Re: [Pharo-users] Cannot keep image running.

by sergio ruiz

Correct.. it looks like the root of the problem is: Â OPTimedOutError On July 7, 2017 at 9:40:21 AM, Denis Kudriashov (dionisiydk(a)gmail.com) wrote: And the error which you show is on server side? ---- peace, sergio photographer, journalist, visionary Public Key:Â http://bit.ly/29z9fG0 #BitMessageÂ BM-NBaswViL21xqgg9STRJjaJaUoyiNe2dV http://www.Village-Buzz.com http://www.ThoseOptimizeGuys.com http://www.coffee-black.com http://www.painlessfrugality.com http://www.twitter.com/sergio_101 http://www.facebook.com/sergio101

July 7, 2017

Re: [Pharo-users] Should I be running 32bit or 64bit pharo 6?

by sergio ruiz

I have just been doing: wget -O- get.pharo.org/64 | bash is this ok? On July 7, 2017 at 9:50:21 AM, Alistair Grant (akgrant0710(a)gmail.com) wrote: If you're on Ubuntu, the snap install includes the 32bit dependencies. Instructions are inÂ https://pharo.fogbugz.com/f/cases/20147 (From my phone) Cheers, Alistair On 7 Jul. 2017 14:06, "sergio ruiz" <sergio.rrd(a)gmail.com> wrote: I am running the remote (live server - linux) and my development machine(macOS) 64bit.. On July 7, 2017 at 4:51:05 AM, Denis Kudriashov (dionisiydk(a)gmail.com) wrote: It depends on you. 64bits makes linux installation easy - no need to thing about 32bits dependency. Â ---- peace, sergio photographer, journalist, visionary Public Key:Â http://bit.ly/29z9fG0 #BitMessageÂ BM-NBaswViL21xqgg9STRJjaJaUoyiNe2dV http://www.Village-Buzz.com http://www.ThoseOptimizeGuys.com http://www.coffee-black.com http://www.painlessfrugality.com http://www.twitter.com/sergio_101 http://www.facebook.com/sergio101 ---- peace, sergio photographer, journalist, visionary Public Key:Â http://bit.ly/29z9fG0 #BitMessageÂ BM-NBaswViL21xqgg9STRJjaJaUoyiNe2dV http://www.Village-Buzz.com http://www.ThoseOptimizeGuys.com http://www.coffee-black.com http://www.painlessfrugality.com http://www.twitter.com/sergio_101 http://www.facebook.com/sergio101

July 7, 2017