- Pharo-users - lists.pharo.org

Re: [Pharo-users] installing iceberg

by Norbert Hartl

> Am 08.07.2017 um 08:24 schrieb Stephane Ducasse <stepharo.self(a)gmail.com>: > > Sergio > > You should pay attention we discovered incompatibilities in the libgit lib. > So we will produce a Pharo 6.0.1. I hope it is 6.1 > > Now did you try the latest VM because it should contain the latest > version of the plugin. > Now I do not know what is the status of the of the 64bits. Sven > mentioned that he was using it with iceberg. > 32bits works fine. 64 bits needs to reinstall iceberg but works fine then. The 6.1 willmake that integration so 64 bits will be just fine Norbert > Stef > > >> On Thu, Jul 6, 2017 at 11:02 PM, sergio ruiz <sergio.rrd(a)gmail.com> wrote: >> Hi, all.. >> >> I am trying to install iceberg, and am running into a problem finding >> iceberg.. >> >> looks like i am missing ibgit2.dylib' 'libgit2.0.dylibâ >> >> running macOS.. >> >> any ideas? thanks! >> >> ---- >> peace, >> sergio >> photographer, journalist, visionary >> >> Public Key: http://bit.ly/29z9fG0 >> #BitMessage BM-NBaswViL21xqgg9STRJjaJaUoyiNe2dV >> http://www.Village-Buzz.com >> http://www.ThoseOptimizeGuys.com >> http://www.coffee-black.com >> http://www.painlessfrugality.com >> http://www.twitter.com/sergio_101 >> http://www.facebook.com/sergio101

July 8, 2017

Re: [Pharo-users] Pharo starts completely minimized

by Stephane Ducasse

pharo-ui is a script. On Fri, Jul 7, 2017 at 9:36 PM, Andreas Sunardi <a.sunardi(a)gmail.com> wrote: > Where did I see this pharo-ui? I thought I saw it before. I never used it, I > always use 'pharo' script/executable, but now I can't find it. I checked > windows(P5/P6). linux(P5/P6), mac(P6) and I don't find this pharo-ui. > > There's -iconic (Pharo 5) and --iconic (Pharo 6) options. > > $ pharo --help | grep iconic > --iconic start up iconified > > I wonder if that is set in pharo-ui. But again, I can't find pharo-ui file. > > On Thu, Jul 6, 2017 at 7:24 PM, sergio ruiz <sergio.rrd(a)gmail.com> wrote: >> >> For some reason, every time i start pharo. like: ./pharo-ui Pharo.image >> >> it starts as a tiny box.. a completely minimized window.. >> >> any ideas? >> >> should i be starting it differently? >> >> Thanks! >> >> >> >> ---- >> peace, >> sergio >> photographer, journalist, visionary >> >> Public Key: http://bit.ly/29z9fG0 >> #BitMessage BM-NBaswViL21xqgg9STRJjaJaUoyiNe2dV >> http://www.Village-Buzz.com >> http://www.ThoseOptimizeGuys.com >> http://www.coffee-black.com >> http://www.painlessfrugality.com >> http://www.twitter.com/sergio_101 >> http://www.facebook.com/sergio101 > >

July 8, 2017

Re: [Pharo-users] Pharo starts completely minimized

by Stephane Ducasse

Yes this happens to me too. Can you add a bug entry? Stef On Fri, Jul 7, 2017 at 9:36 PM, Andreas Sunardi <a.sunardi(a)gmail.com> wrote: > Where did I see this pharo-ui? I thought I saw it before. I never used it, I > always use 'pharo' script/executable, but now I can't find it. I checked > windows(P5/P6). linux(P5/P6), mac(P6) and I don't find this pharo-ui. > > There's -iconic (Pharo 5) and --iconic (Pharo 6) options. > > $ pharo --help | grep iconic > --iconic start up iconified > > I wonder if that is set in pharo-ui. But again, I can't find pharo-ui file. > > On Thu, Jul 6, 2017 at 7:24 PM, sergio ruiz <sergio.rrd(a)gmail.com> wrote: >> >> For some reason, every time i start pharo. like: ./pharo-ui Pharo.image >> >> it starts as a tiny box.. a completely minimized window.. >> >> any ideas? >> >> should i be starting it differently? >> >> Thanks! >> >> >> >> ---- >> peace, >> sergio >> photographer, journalist, visionary >> >> Public Key: http://bit.ly/29z9fG0 >> #BitMessage BM-NBaswViL21xqgg9STRJjaJaUoyiNe2dV >> http://www.Village-Buzz.com >> http://www.ThoseOptimizeGuys.com >> http://www.coffee-black.com >> http://www.painlessfrugality.com >> http://www.twitter.com/sergio_101 >> http://www.facebook.com/sergio101 > >

July 8, 2017

Re: [Pharo-users] installing iceberg

by Stephane Ducasse

Sergio You should pay attention we discovered incompatibilities in the libgit lib. So we will produce a Pharo 6.0.1. Now did you try the latest VM because it should contain the latest version of the plugin. Now I do not know what is the status of the of the 64bits. Sven mentioned that he was using it with iceberg. Stef On Thu, Jul 6, 2017 at 11:02 PM, sergio ruiz <sergio.rrd(a)gmail.com> wrote: > Hi, all.. > > I am trying to install iceberg, and am running into a problem finding > iceberg.. > > looks like i am missing ibgit2.dylib' 'libgit2.0.dylibâ > > running macOS.. > > any ideas? thanks! > > ---- > peace, > sergio > photographer, journalist, visionary > > Public Key: http://bit.ly/29z9fG0 > #BitMessage BM-NBaswViL21xqgg9STRJjaJaUoyiNe2dV > http://www.Village-Buzz.com > http://www.ThoseOptimizeGuys.com > http://www.coffee-black.com > http://www.painlessfrugality.com > http://www.twitter.com/sergio_101 > http://www.facebook.com/sergio101

July 8, 2017

Re: [Pharo-users] 2 questions around gitlab, gitfiletree, BaselineOf

by Sabine Manaa

Hi Thierry, changing my hostname into lowercase letters and changing from :spf to /spf fixed all my issues. The config file is read and so, the right port is found :-) This is so great, thank you all very much. I can proceed then wit the startup files. Regards Sabine 2017-07-08 0:09 GMT+02:00 Thierry Goubier [via Smalltalk] < ml+s1294792n4953950h45(a)n4.nabble.com>: > Hi Sabine, > > as far as I remember when I implemented it, the use of a config file > shouldn't be an issue, because GitFileTree rewrites exactly the > git@SPF_GITLAB the way you would expect, as long as it manages to > identify correctly the parts in the URL (and to identify those parts, it > relies on Zinc). > > Now, have you tried with: > > gitfiletree://SPF_GITLAB/SPF/Spesenfuchs > > ? > > Zinc correctly identifies SPF_GITLAB as the host, but it writes it > non-capitalized (spf_gitlab), which may makes it miss your .ssh/config > entry. > > In that case, could you add the spf_gitlab entry as well in your config > file ? > > Thierry > > Le 07/07/2017 Ã 21:32, Sabine Manaa a Ã©crit : > > > Hi Thierry, Gabriel and Peter, > > > > thank you very much. First I had a look at this because it would be nice > > to load directly from Gitlab (with then generating a local repository > > automatically): > > > > spec repository: > > 'gitfiletree://gitlab.intra.example.com/ANiceLib:master/ > > <http://example.com/ANiceLib:master/>placeWhereAreThePackages'; > > > > I did not manage to use it because I would need to give a port as > > parameter (we do not use port 22). I chatted in discord with Peter > Uhnak. > > > > It seemed that this is not yet possible because of my case that i do not > > use port 22 and I use a config file. > > > > On the command line, this command succeeds with cloning my repository > > from gitlab: > > > > git clone git@SPF_GITLAB:SPF/Spesenfuchs.git > > > > > > There is a config file which defines my host: > > > > host SPF_GITLAB > > HostName 192.168.1.61 > > Port 30001 > > > > I try to write my baseline with this > > > > spec repository: 'gitfiletree://SPF_GITLAB:SPF/Spesenfuchs.git'. > > > > > > This did not work in the beginning. > > > > I played around and found out that there are 2 points where I had to > > change the system to make this work: > > > > 1) ZnUrl>>parseHostPort: > > stream atEnd > > ifFalse: ["portNumber := Integer readFrom: stream ifFail: [ > > ZnPortNotANumber signal ]. > > (portNumber between: 1 and: 65535) ifFalse: [ DomainError signalFrom: 1 > > to: 65535 ]." > > self port: 30001 "portNumber" ] ] > > ->> here, it is assumed that there is always a port integer after the : > > If i set it hard to my port I skip this problem > > > > 2) MCFileTreeGitRepository>>basicFromUrl: aZnUrl > > here I changed the code also hard from > > > > repo remoteUrl: 'git@' , aZnUrl host , ':' , path > > to > > repo remoteUrl: 'git@SPF_GITLAB:SPF/Spesenfuchs.git' > > > > ->> here, aUZnUrl host is in lowercase but my name is in uppercase > > :SPF is missing > > > > the existing code would make this: > > git@spf_gitlab:Spesenfuchs.git > > instead of > > git@SPF_GITLAB:SPF/Spesenfuchs.git > > > > With this 2 changes, my code could load. > > > > So my question: Are this 2 points issues to fix or should I create my > > own workaround (create my own loader, not making THIS changes )? > > > > Regards > > Sabine > > > > > > > > > > > > 2017-07-07 16:06 GMT+02:00 gcotelli [via Smalltalk] <[hidden email] > > </user/SendEmail.jtp?type=node&node=4953938&i=0>>: > > > > Hi Sabine, > > for your own baseline you don't need to specify a repository. Just > > load it with something like: > > > > Metacello new > > baseline: 'RLA24'; > > repository: 'filetree://disklocation/repository'; > > load: 'Group To Load' > > > > Also you can have local copies of your dependencies in case you > > don't want to use an internet connection for dowloading, just use > > the lock command of Metacello to "overwrite" the repository > > definitions. For example take a look at: > > > > https://gist.github.com/gcotelli/d4521656358786ae2aca12a70478980f > > <https://gist.github.com/gcotelli/d4521656358786ae2aca12a70478980f> > > > > Regards, > > Gabriel > > > > > > On Fri, Jul 7, 2017 at 10:48 AM, Sabine Manaa <[hidden email] > > <http:///user/SendEmail.jtp?type=node&node=4953880&i=0>> wrote: > > > > Hi, > > > > we have our own gitlab running now and I succeeded to move our > > code from > > sthub to it. > > I can push my new code into it from Pharo. All fine. > > I also created a Baseline (based on my former configurationOf). > > Loading the code from others (e.g. seaside) with this baseline > > is also fine. > > > > There are 2 Points where I am sure it could be better (it is > worse) > > 1) For loading my own code, I currently have a bad solution > > It is in the postLoadBaseline and does this: > > > > | gitRepository | > > gitRepository := MCFileTreeRepository new > > directory: > > '/Applications/Pharo5.0-7.app/Contents/Resources/spf-gitlab/repository' > > > asFileReference. > > {'RKA24-Model' . 'RKA24-System' . 'RKA24-Translator' . > > 'RKA24-View' . > > 'RKA24-Test' . 'RKA24-Report' . 'RKA24-Overwrites'} > > do: [ :each | > > Gofer it > > repository: gitRepository; > > package: each; > > load ]. > > > > I would like to load it within my baseline like this below but I > > dont know > > what to write in the fileTreeRepository method... > > > > baseline: spec > > <baseline> > > spec > > for: #common > > do: [ spec blessing: #baseline. > > spec repository: ##self > > fileTreeRepository##. > > "here I load all the the oher stuff" > > spec > > package: 'RKA24-Model'; > > package: 'RKA24-System'; > > package: 'RKA24-Translator'; > > package: 'RKA24-View'; > > package: 'RKA24-Test'; > > package: 'RKA24-Report'; > > package: 'RKA24-Overwrites' ] > > > > 2) Also, when I take a new Image, I have to do several steps > > > > load gitfiletree from catalog > > add/open my gitfiletree repository from Monticello > > load BaselineOfRKA24 manually with > > (BaselineOfRKA24 project map at: 'baseline') load > > > > I think this is not the best way, I would like to make it right. > > > > Can anyone give me some hints how to improve this two steps? > > I use Pharo 5 and I don't want to go to Pharo 6 right now. > > I develop on mac and production server is on windows. > > > > Regards > > Sabine > > > > > > > > > > > > -- > > View this message in context: > > http://forum.world.st/2-questions-around-gitlab- > gitfiletree-BaselineOf-tp4953877.html > > <http://forum.world.st/2-questions-around-gitlab- > gitfiletree-BaselineOf-tp4953877.html> > > Sent from the Pharo Smalltalk Users mailing list archive at > > Nabble.com. > > > > > > > > > > ------------------------------------------------------------------------ > > > If you reply to this email, your message will be added to the > > discussion below: > > http://forum.world.st/2-questions-around-gitlab- > gitfiletree-BaselineOf-tp4953877p4953880.html > > <http://forum.world.st/2-questions-around-gitlab- > gitfiletree-BaselineOf-tp4953877p4953880.html> > > > > To start a new topic under Pharo Smalltalk Users, email [hidden > > email] </user/SendEmail.jtp?type=node&node=4953938&i=1> > > To unsubscribe from Pharo Smalltalk Users, click here. > > NAML > > <http://forum.world.st/template/NamlServlet.jtp? > macro=macro_viewer&id=instant_html%21nabble%3Aemail.naml& > base=nabble.naml.namespaces.BasicNamespace-nabble.view. > web.template.NabbleNamespace-nabble.view.web.template. > NodeNamespace&breadcrumbs=notify_subscribers%21nabble% > 3Aemail.naml-instant_emails%21nabble%3Aemail.naml-send_ > instant_email%21nabble%3Aemail.naml> > > > > > > > > > > ------------------------------------------------------------------------ > > > View this message in context: Re: 2 questions around gitlab, > > gitfiletree, BaselineOf > > <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf- > tp4953877p4953938.html> > > Sent from the Pharo Smalltalk Users mailing list archive > > <http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html> at > Nabble.com. > > > > > ------------------------------ > If you reply to this email, your message will be added to the discussion > below: > http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf- > tp4953877p4953950.html > To start a new topic under Pharo Smalltalk Users, email > ml+s1294792n1310670h65(a)n4.nabble.com > To unsubscribe from Pharo Smalltalk Users, click here > <http://forum.world.st/template/NamlServlet.jtp?macro=unsubscribe_by_code&no…> > . > NAML > <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instan…> > -- View this message in context: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp49… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

July 8, 2017

Re: [Pharo-users] 2 questions around gitlab, gitfiletree, BaselineOf

by Thierry Goubier

Hi Sabine, as far as I remember when I implemented it, the use of a config file shouldn't be an issue, because GitFileTree rewrites exactly the git@SPF_GITLAB the way you would expect, as long as it manages to identify correctly the parts in the URL (and to identify those parts, it relies on Zinc). Now, have you tried with: gitfiletree://SPF_GITLAB/SPF/Spesenfuchs ? Zinc correctly identifies SPF_GITLAB as the host, but it writes it non-capitalized (spf_gitlab), which may makes it miss your .ssh/config entry. In that case, could you add the spf_gitlab entry as well in your config file ? Thierry Le 07/07/2017 Ã 21:32, Sabine Manaa a Ã©crit : > Hi Thierry, Gabriel and Peter, > > thank you very much. First I had a look at this because it would be nice > to load directly from Gitlab (with then generating a local repository > automatically): > > spec repository: > 'gitfiletree://gitlab.intra.example.com/ANiceLib:master/ > <http://example.com/ANiceLib:master/>placeWhereAreThePackages'; > > I did not manage to use it because I would need to give a port as > parameter (we do not use port 22). I chatted in discord with Peter Uhnak. > > It seemed that this is not yet possible because of my case that i do not > use port 22 and I use a config file. > > On the command line, this command succeeds with cloning my repository > from gitlab: > > git clone git@SPF_GITLAB:SPF/Spesenfuchs.git > > > There is a config file which defines my host: > > host SPF_GITLAB > HostName 192.168.1.61 > Port 30001 > > I try to write my baseline with this > > spec repository: 'gitfiletree://SPF_GITLAB:SPF/Spesenfuchs.git'. > > > This did not work in the beginning. > > I played around and found out that there are 2 points where I had to > change the system to make this work: > > 1) ZnUrl>>parseHostPort: > stream atEnd > ifFalse: ["portNumber := Integer readFrom: stream ifFail: [ > ZnPortNotANumber signal ]. > (portNumber between: 1 and: 65535) ifFalse: [ DomainError signalFrom: 1 > to: 65535 ]." > self port: 30001 "portNumber" ] ] > ->> here, it is assumed that there is always a port integer after the : > If i set it hard to my port I skip this problem > > 2) MCFileTreeGitRepository>>basicFromUrl: aZnUrl > here I changed the code also hard from > > repo remoteUrl: 'git@' , aZnUrl host , ':' , path > to > repo remoteUrl: 'git@SPF_GITLAB:SPF/Spesenfuchs.git' > > ->> here, aUZnUrl host is in lowercase but my name is in uppercase > :SPF is missing > > the existing code would make this: > git@spf_gitlab:Spesenfuchs.git > instead of > git@SPF_GITLAB:SPF/Spesenfuchs.git > > With this 2 changes, my code could load. > > So my question: Are this 2 points issues to fix or should I create my > own workaround (create my own loader, not making THIS changes )? > > Regards > Sabine > > > > > > 2017-07-07 16:06 GMT+02:00 gcotelli [via Smalltalk] <[hidden email] > </user/SendEmail.jtp?type=node&node=4953938&i=0>>: > > Hi Sabine, > for your own baseline you don't need to specify a repository. Just > load it with something like: > > Metacello new > baseline: 'RLA24'; > repository: 'filetree://disklocation/repository'; > load: 'Group To Load' > > Also you can have local copies of your dependencies in case you > don't want to use an internet connection for dowloading, just use > the lock command of Metacello to "overwrite" the repository > definitions. For example take a look at: > > https://gist.github.com/gcotelli/d4521656358786ae2aca12a70478980f > <https://gist.github.com/gcotelli/d4521656358786ae2aca12a70478980f> > > Regards, > Gabriel > > > On Fri, Jul 7, 2017 at 10:48 AM, Sabine Manaa <[hidden email] > <http:///user/SendEmail.jtp?type=node&node=4953880&i=0>> wrote: > > Hi, > > we have our own gitlab running now and I succeeded to move our > code from > sthub to it. > I can push my new code into it from Pharo. All fine. > I also created a Baseline (based on my former configurationOf). > Loading the code from others (e.g. seaside) with this baseline > is also fine. > > There are 2 Points where I am sure it could be better (it is worse) > 1) For loading my own code, I currently have a bad solution > It is in the postLoadBaseline and does this: > > | gitRepository | > gitRepository := MCFileTreeRepository new > directory: > '/Applications/Pharo5.0-7.app/Contents/Resources/spf-gitlab/repository' > asFileReference. > {'RKA24-Model' . 'RKA24-System' . 'RKA24-Translator' . > 'RKA24-View' . > 'RKA24-Test' . 'RKA24-Report' . 'RKA24-Overwrites'} > do: [ :each | > Gofer it > repository: gitRepository; > package: each; > load ]. > > I would like to load it within my baseline like this below but I > dont know > what to write in the fileTreeRepository method... > > baseline: spec > <baseline> > spec > for: #common > do: [ spec blessing: #baseline. > spec repository: ##self > fileTreeRepository##. > "here I load all the the oher stuff" > spec > package: 'RKA24-Model'; > package: 'RKA24-System'; > package: 'RKA24-Translator'; > package: 'RKA24-View'; > package: 'RKA24-Test'; > package: 'RKA24-Report'; > package: 'RKA24-Overwrites' ] > > 2) Also, when I take a new Image, I have to do several steps > > load gitfiletree from catalog > add/open my gitfiletree repository from Monticello > load BaselineOfRKA24 manually with > (BaselineOfRKA24 project map at: 'baseline') load > > I think this is not the best way, I would like to make it right. > > Can anyone give me some hints how to improve this two steps? > I use Pharo 5 and I don't want to go to Pharo 6 right now. > I develop on mac and production server is on windows. > > Regards > Sabine > > > > > > -- > View this message in context: > http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp49… > <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp49…> > Sent from the Pharo Smalltalk Users mailing list archive at > Nabble.com. > > > > > ------------------------------------------------------------------------ > If you reply to this email, your message will be added to the > discussion below: > http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp49… > <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp49…> > > To start a new topic under Pharo Smalltalk Users, email [hidden > email] </user/SendEmail.jtp?type=node&node=4953938&i=1> > To unsubscribe from Pharo Smalltalk Users, click here. > NAML > <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instan…> > > > > > ------------------------------------------------------------------------ > View this message in context: Re: 2 questions around gitlab, > gitfiletree, BaselineOf > <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp49…> > Sent from the Pharo Smalltalk Users mailing list archive > <http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html> at Nabble.com.

July 7, 2017

Re: [Pharo-users] installing iceberg

by Tim Mackinnon

There are known problems with iceberg in 64bit pharo6. If you don't yet need 64bit (and you probably don't) - I would say stick to 32bit and get more familiar with things. Soon there will be Pharo 6.1 and then you can upgrade if you need it. Tim Sent from my iPhone > On 7 Jul 2017, at 02:06, sergio ruiz <sergio.rrd(a)gmail.com> wrote: > > I am running pharo 6. > > i am running the 64bit version.. should i be running the 32bit version? > > when i try to run iceberg, I get an error.. but it is installed when i download.. > >> On July 6, 2017 at 5:32:09 PM, Tim Mackinnon (tim(a)testit.works) wrote: >> >> there were some instructions in an email from Esteban - but you only need to do that if you want to run 64bit - otherwise you can stick with the stock Pharo 6 one? > ---- > peace, > sergio > photographer, journalist, visionary > > Public Key: http://bit.ly/29z9fG0 > #BitMessage BM-NBaswViL21xqgg9STRJjaJaUoyiNe2dV > http://www.Village-Buzz.com > http://www.ThoseOptimizeGuys.com > http://www.coffee-black.com > http://www.painlessfrugality.com > http://www.twitter.com/sergio_101 > http://www.facebook.com/sergio101

July 7, 2017

Re: [Pharo-users] Pharo starts completely minimized

by Andreas Sunardi

Where did I see this pharo-ui? I thought I saw it before. I never used it, I always use 'pharo' script/executable, but now I can't find it. I checked windows(P5/P6). linux(P5/P6), mac(P6) and I don't find this pharo-ui. There's -iconic (Pharo 5) and --iconic (Pharo 6) options. $ pharo --help | grep iconic --iconic start up iconified I wonder if that is set in pharo-ui. But again, I can't find pharo-ui file. On Thu, Jul 6, 2017 at 7:24 PM, sergio ruiz <sergio.rrd(a)gmail.com> wrote: > For some reason, every time i start pharo. like: ./pharo-ui Pharo.image > > it starts as a tiny box.. a completely minimized window.. > > any ideas? > > should i be starting it differently? > > Thanks! > > > > ---- > peace, > sergio > photographer, journalist, visionary > > Public Key: http://bit.ly/29z9fG0 > #BitMessage BM-NBaswViL21xqgg9STRJjaJaUoyiNe2dV > http://www.Village-Buzz.com <http://www.village-buzz.com/> > http://www.ThoseOptimizeGuys.com <http://www.thoseoptimizeguys.com/> > http://www.coffee-black.com > http://www.painlessfrugality.com > http://www.twitter.com/sergio_101 > http://www.facebook.com/sergio101 >

July 7, 2017

Re: [Pharo-users] 2 questions around gitlab, gitfiletree, BaselineOf

by Sabine Manaa

Hi Thierry, Gabriel and Peter, thank you very much. First I had a look at this because it would be nice to load directly from Gitlab (with then generating a local repository automatically): spec repository: 'gitfiletree://gitlab.intra.example.com/ANiceLib:master/ placeWhereAreThePackages'; I did not manage to use it because I would need to give a port as parameter (we do not use port 22). I chatted in discord with Peter Uhnak. It seemed that this is not yet possible because of my case that i do not use port 22 and I use a config file. On the command line, this command succeeds with cloning my repository from gitlab: git clone git@SPF_GITLAB:SPF/Spesenfuchs.git There is a config file which defines my host: host SPF_GITLAB HostName 192.168.1.61 Port 30001 I try to write my baseline with this spec repository: 'gitfiletree://SPF_GITLAB:SPF/Spesenfuchs.git'. This did not work in the beginning. I played around and found out that there are 2 points where I had to change the system to make this work: 1) ZnUrl>>parseHostPort: stream atEnd ifFalse: ["portNumber := Integer readFrom: stream ifFail: [ ZnPortNotANumber signal ]. (portNumber between: 1 and: 65535) ifFalse: [ DomainError signalFrom: 1 to: 65535 ]." self port: 30001 "portNumber" ] ] ->> here, it is assumed that there is always a port integer after the : If i set it hard to my port I skip this problem 2) MCFileTreeGitRepository>>basicFromUrl: aZnUrl here I changed the code also hard from repo remoteUrl: 'git@' , aZnUrl host , ':' , path to repo remoteUrl: 'git@SPF_GITLAB:SPF/Spesenfuchs.git' ->> here, aUZnUrl host is in lowercase but my name is in uppercase :SPF is missing the existing code would make this: git@spf_gitlab:Spesenfuchs.git instead of git@SPF_GITLAB:SPF/Spesenfuchs.git With this 2 changes, my code could load. So my question: Are this 2 points issues to fix or should I create my own workaround (create my own loader, not making THIS changes )? Regards Sabine 2017-07-07 16:06 GMT+02:00 gcotelli [via Smalltalk] < ml+s1294792n4953880h75(a)n4.nabble.com>: > Hi Sabine, > for your own baseline you don't need to specify a repository. Just load it > with something like: > > Metacello new > baseline: 'RLA24'; > repository: 'filetree://disklocation/repository'; > load: 'Group To Load' > > Also you can have local copies of your dependencies in case you don't want > to use an internet connection for dowloading, just use the lock command of > Metacello to "overwrite" the repository definitions. For example take a > look at: > > https://gist.github.com/gcotelli/d4521656358786ae2aca12a70478980f > > Regards, > Gabriel > > > On Fri, Jul 7, 2017 at 10:48 AM, Sabine Manaa <[hidden email] > <http:///user/SendEmail.jtp?type=node&node=4953880&i=0>> wrote: > >> Hi, >> >> we have our own gitlab running now and I succeeded to move our code from >> sthub to it. >> I can push my new code into it from Pharo. All fine. >> I also created a Baseline (based on my former configurationOf). >> Loading the code from others (e.g. seaside) with this baseline is also >> fine. >> >> There are 2 Points where I am sure it could be better (it is worse) >> 1) For loading my own code, I currently have a bad solution >> It is in the postLoadBaseline and does this: >> >> | gitRepository | >> gitRepository := MCFileTreeRepository new >> directory: >> '/Applications/Pharo5.0-7.app/Contents/Resources/spf-gitlab/repository' >> asFileReference. >> {'RKA24-Model' . 'RKA24-System' . 'RKA24-Translator' . >> 'RKA24-View' . >> 'RKA24-Test' . 'RKA24-Report' . 'RKA24-Overwrites'} >> do: [ :each | >> Gofer it >> repository: gitRepository; >> package: each; >> load ]. >> >> I would like to load it within my baseline like this below but I dont know >> what to write in the fileTreeRepository method... >> >> baseline: spec >> <baseline> >> spec >> for: #common >> do: [ spec blessing: #baseline. >> spec repository: ##self fileTreeRepository##. >> "here I load all the the oher stuff" >> spec >> package: 'RKA24-Model'; >> package: 'RKA24-System'; >> package: 'RKA24-Translator'; >> package: 'RKA24-View'; >> package: 'RKA24-Test'; >> package: 'RKA24-Report'; >> package: 'RKA24-Overwrites' ] >> >> 2) Also, when I take a new Image, I have to do several steps >> >> load gitfiletree from catalog >> add/open my gitfiletree repository from Monticello >> load BaselineOfRKA24 manually with >> (BaselineOfRKA24 project map at: 'baseline') load >> >> I think this is not the best way, I would like to make it right. >> >> Can anyone give me some hints how to improve this two steps? >> I use Pharo 5 and I don't want to go to Pharo 6 right now. >> I develop on mac and production server is on windows. >> >> Regards >> Sabine >> >> >> >> >> >> -- >> View this message in context: http://forum.world.st/2-questi >> ons-around-gitlab-gitfiletree-BaselineOf-tp4953877.html >> Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. >> >> > > > ------------------------------ > If you reply to this email, your message will be added to the discussion > below: > http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf- > tp4953877p4953880.html > To start a new topic under Pharo Smalltalk Users, email > ml+s1294792n1310670h65(a)n4.nabble.com > To unsubscribe from Pharo Smalltalk Users, click here > <http://forum.world.st/template/NamlServlet.jtp?macro=unsubscribe_by_code&no…> > . > NAML > <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instan…> > -- View this message in context: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp49… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

July 7, 2017

Re: [Pharo-users] Cannot keep image running.

by sergio ruiz

Hey, Denis.. Thanks SO MUCH for all of your help over the past few days.. I think I have my PharmIDE all set up correctly now, and itâs doing just fine.. Thank you for all your work on this project.. i will evangelize for sure! On July 7, 2017 at 11:07:34 AM, Denis Kudriashov (dionisiydk(a)gmail.com) wrote: How you saved image?Â Doing it from remote playground will lead to such problem because evaluation expects result from server. And after restart server will try return it again.Â To correctly save image evaluate "remotePharo saveImage"Â from local playground. It take care about such cases (it request server without waiting result). ---- peace, sergio photographer, journalist, visionary Public Key:Â http://bit.ly/29z9fG0 #BitMessageÂ BM-NBaswViL21xqgg9STRJjaJaUoyiNe2dV http://www.Village-Buzz.com http://www.ThoseOptimizeGuys.com http://www.coffee-black.com http://www.painlessfrugality.com http://www.twitter.com/sergio_101 http://www.facebook.com/sergio101

July 7, 2017