- Pharo-users - lists.pharo.org

Re: [Pharo-users] Iceberg and removing packages

by Esteban A. Maringolo

That's exactly what I did. But after synchronizing the repo, the package wasn't listed on Iceberg but it still was in in the repo. It happened with another package in another repo as well. If it happens again I'll let you know. Regards! Esteban A. Maringolo 2017-07-31 7:03 GMT-03:00 Esteban Lorenzano <estebanlm(a)gmail.com>: > Hi, > > In iceberg, you have to go to package tab and say "remove package from disk" > > Esteban > >> On 30 Jul 2017, at 17:01, Esteban A. Maringolo <emaringolo(a)gmail.com> wrote: >> >> I got into the pharo-local/iceberg/... and git rm'ed the directory, >> commited and synchronized the project in Iceberg. >> >> I hope it doesn't break anything since I don't know how much "magic" >> does Iceberg behind the scenes other than automating the git commands >> and providing a centralized UI. >> >> What is the "This is all you need to read to understand Iceberg?" >> document I should read? I read its wiki, but it seems there is more to >> go. >> >> Regards! >> >> Esteban A. Maringolo >> >> >> 2017-07-30 11:28 GMT-03:00 Peter Uhnak <i.uhnak(a)gmail.com>: >>> This was supposedly fixed in April https://github.com/pharo-vcs/iceberg/issues/317 >>> >>> however I had the same issue ~two months ago, so I had to delete the packages by hand. >>> >>> P >>> >>> >>>> On Sun, Jul 30, 2017 at 11:04:20AM -0300, Esteban A. Maringolo wrote: >>>> Hi, >>>> >>>> I'm playing around with Iceberg in Pharo 6, and even when I find the >>>> workflow streamlined, but since it doesn't map 1:1 with git workflow >>>> from other IDEs or command line, I find myself not knowing how to do >>>> certain tasks. >>>> >>>> One thing that happened is that I published a few packages to one of >>>> my repos in Github, then I decided to remove one of the packages from >>>> the repo, then I synchronized it but in the repo there is still is the >>>> package folder for the package I removed. >>>> >>>> What should I do to definitely remove those files from the commit? >>>> >>>> Regards! >>>> >>>> Esteban A. Maringolo >>>> >>> >> >

July 31, 2017

Re: [Pharo-users] Zinc Crash / semaphores

by phil＠highoctane.be

I am doing external REST calls indeed. No caching across WASessions. Phil On Mon, Jul 31, 2017 at 1:00 PM, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: > Do you make any external (REST/network) calls yourself while handling your > requests ? > > Do you do any kind of caching yourself ? > > > On 31 Jul 2017, at 12:40, phil(a)highoctane.be wrote: > > > > I have this crash log on a server. > > > > https://gist.github.com/philippeback/9527b74c081629c2b05466353c4326b3 > > > > It is running on Windows 2012 R2 with a Pharo 5.0 > > There is a SeasideApp. > > > > Is there any known semaphore leak? > > > > Because this app is very lightly used and I was suprised to see this. > > > > Windows may be the cause but never had such an issue in the environment. > > > > TIA > > Phil > > > >

July 31, 2017

Re: [Pharo-users] Zinc Crash / semaphores

by Sven Van Caekenberghe

Do you make any external (REST/network) calls yourself while handling your requests ? Do you do any kind of caching yourself ? > On 31 Jul 2017, at 12:40, phil(a)highoctane.be wrote: > > I have this crash log on a server. > > https://gist.github.com/philippeback/9527b74c081629c2b05466353c4326b3 > > It is running on Windows 2012 R2 with a Pharo 5.0 > There is a SeasideApp. > > Is there any known semaphore leak? > > Because this app is very lightly used and I was suprised to see this. > > Windows may be the cause but never had such an issue in the environment. > > TIA > Phil

July 31, 2017

Zinc Crash / semaphores

by phil＠highoctane.be

I have this crash log on a server. https://gist.github.com/philippeback/9527b74c081629c2b05466353c4326b3 It is running on Windows 2012 R2 with a Pharo 5.0 There is a SeasideApp. Is there any known semaphore leak? Because this app is very lightly used and I was suprised to see this. Windows may be the cause but never had such an issue in the environment. TIA Phil

July 31, 2017

Re: [Pharo-users] Iceberg and removing packages

by Esteban Lorenzano

Hi, In iceberg, you have to go to package tab and say "remove package from disk" Esteban > On 30 Jul 2017, at 17:01, Esteban A. Maringolo <emaringolo(a)gmail.com> wrote: > > I got into the pharo-local/iceberg/... and git rm'ed the directory, > commited and synchronized the project in Iceberg. > > I hope it doesn't break anything since I don't know how much "magic" > does Iceberg behind the scenes other than automating the git commands > and providing a centralized UI. > > What is the "This is all you need to read to understand Iceberg?" > document I should read? I read its wiki, but it seems there is more to > go. > > Regards! > > Esteban A. Maringolo > > > 2017-07-30 11:28 GMT-03:00 Peter Uhnak <i.uhnak(a)gmail.com>: >> This was supposedly fixed in April https://github.com/pharo-vcs/iceberg/issues/317 >> >> however I had the same issue ~two months ago, so I had to delete the packages by hand. >> >> P >> >> >>> On Sun, Jul 30, 2017 at 11:04:20AM -0300, Esteban A. Maringolo wrote: >>> Hi, >>> >>> I'm playing around with Iceberg in Pharo 6, and even when I find the >>> workflow streamlined, but since it doesn't map 1:1 with git workflow >>> from other IDEs or command line, I find myself not knowing how to do >>> certain tasks. >>> >>> One thing that happened is that I published a few packages to one of >>> my repos in Github, then I decided to remove one of the packages from >>> the repo, then I synchronized it but in the repo there is still is the >>> package folder for the package I removed. >>> >>> What should I do to definitely remove those files from the commit? >>> >>> Regards! >>> >>> Esteban A. Maringolo >>> >> >

July 31, 2017

Re: [Pharo-users] Performance of zero conf install since 6.1 seems very slow?

by Guillermo Polito

I think it's the entire file server. The thing, i think, is that the VM is much smaller than the image or the sources to download. On Mon, Jul 31, 2017 at 2:26 AM, Tim Mackinnon <tim(a)testit.works> wrote: > Actually its all over the place - the times vary from seconds (like it > used to work) to 5-10 mins. Itâs not very reliable - so. I hope it can be > fixed (although it does seem that the image download is usually the one > Iâve noticed to slow down dramatically). Iâm still trying to sort out some > caching on my end to hopefully lessen the impact of this down stream where > my CI lives. > > Tim > > On 31 Jul 2017, at 00:12, Tim Mackinnon <tim(a)testit.works> wrote: > > Iâm still seeing very slow download response times - so Iâve started to > work on better caching Inria downloads in my build script - however in > doing this, I notice that its not the VM that takes time to download (its > as quick as always) its the image? e.g. (http://files.pharo.org/ > get-files/61/pharo64.zip) > > Why would this file take so much longer than than the vm? (As in minutes > vs. Seconds) > > Tim > > On 26 Jul 2017, at 12:59, Tim Mackinnon <tim(a)testit.works> wrote: > > Yes I see the same - it was seconds and now minutes. > > Maybe it is worth having a mirror for CI (or does it get edge cached > anyway- probably not from what we are seeing, but possibly if could be?) > > Tim > > Sent from my iPhone > > On 26 Jul 2017, at 09:17, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: > > it may been related to recent INRIA infrastructure changes. > there is nothing 6.1 itself can do with that (6.1 is just a bunch of zips) > > Esteban > > On 26 Jul 2017, at 09:44, Guillermo Polito <guillermopolito(a)gmail.com> > wrote: > > We were also seeing it yesterday. In travis, 10m to download an image (and > thus timeout). Before it took seconds. > > On Wed, Jul 26, 2017 at 9:41 AM, Denis Kudriashov <dionisiydk(a)gmail.com> > wrote: > >> Hi. >> >> I don't know answer. But what time it takes before? >> >> 2017-07-26 9:30 GMT+02:00 Tim Mackinnon <tim(a)testit.works>: >> >>> Hi - has anyone else noticed that since 6.1 - using zero conf for >>> installs is very very slow (it takes minutes to download pharo64.zip when >>> using >>> >>> curl get.pharo.org/64/ | bash >>> >>> >>> This is both on my local computer but also on the gitlab ci server? Is >>> it possibly something isnât configured right? >>> >>> Tim >>> >> >> > > > -- > > Guille Polito > > Research Engineer > French National Center for Scientific Research - *http://www.cnrs.fr* > <http://www.cnrs.fr/> > > > *Web:* *http://guillep.github.io* <http://guillep.github.io/> > *Phone: *+33 06 52 70 66 13 <+33%206%2052%2070%2066%2013> > > > > > -- Guille Polito Research Engineer French National Center for Scientific Research - *http://www.cnrs.fr* <http://www.cnrs.fr> *Web:* *http://guillep.github.io* <http://guillep.github.io> *Phone: *+33 06 52 70 66 13

July 31, 2017

Re: [Pharo-users] How to export critics from Critic Browser?

by HernÃ¡n Morales Durand

It looks super cool. Thank you Peter! HernÃ¡n 2017-07-31 4:07 GMT-03:00 Peter Uhnak <i.uhnak(a)gmail.com>: > Hi, > > I did a small experiment on Travis short while ago that collects the QAs and prints them to output log. > > Script (you would be interested only in the Smalltalk part of the code): https://github.com/peteruhnak/ugly-pharo-code/blob/master/qa-testing.sh > > Travis output (expand line 400): https://travis-ci.org/peteruhnak/ugly-pharo-code#L400 > > Peter > > On Mon, Jul 31, 2017 at 01:38:31AM -0300, HernÃ¡n Morales Durand wrote: >> Hi, >> >> I'm using Pharo 6.1 and I want to export a report of Critics Browser results. >> Is there a way to save the results? >> >> It would be nice to have a CSV, to record historical analysis of my >> progress, then plot using Roassal, etc. >> >> Cheers, >> >> HernÃ¡n >> >

July 31, 2017

Re: [Pharo-users] How to export critics from Critic Browser?

by Peter Uhnak

Hi, I did a small experiment on Travis short while ago that collects the QAs and prints them to output log. Script (you would be interested only in the Smalltalk part of the code): https://github.com/peteruhnak/ugly-pharo-code/blob/master/qa-testing.sh Travis output (expand line 400): https://travis-ci.org/peteruhnak/ugly-pharo-code#L400 Peter On Mon, Jul 31, 2017 at 01:38:31AM -0300, HernÃ¡n Morales Durand wrote: > Hi, > > I'm using Pharo 6.1 and I want to export a report of Critics Browser results. > Is there a way to save the results? > > It would be nice to have a CSV, to record historical analysis of my > progress, then plot using Roassal, etc. > > Cheers, > > HernÃ¡n >

July 31, 2017

How to export critics from Critic Browser?

by HernÃ¡n Morales Durand

Hi, I'm using Pharo 6.1 and I want to export a report of Critics Browser results. Is there a way to save the results? It would be nice to have a CSV, to record historical analysis of my progress, then plot using Roassal, etc. Cheers, HernÃ¡n

July 31, 2017

Spotter question. "Spotter" search keyword need font setting from Pharo Setting Value.

by peter yoo

I'm korean user. pharo using mac or linux. I'm always change font setting. because want look korean characters(so simple) but can't using spotter. GLMRubTextFieldMorph font value have hard coding inside.(maybe... look a "SourceSansPro". my pharo using another font now.) spotter result is ok. because GLMScrollPaneBandBrick font value from "Pharo Setting Value". how can change spotter keyword font value? I'm newbie. detail explanation request please. I want fix and understand. thanks to pharo community. always :D -- http://lookandwalk.com http://looknw.com | http://onionmixer.net peter yoo(Jonghwa Yoo). ROK

July 31, 2017