- Pharo-users - lists.pharo.org

Re: [Pharo-users] sharing context/variables between multiple playgrounds

by Marcus Denker

> On 31 Aug 2017, at 17:46, Sean P. DeNigris <sean(a)clipperadams.com> wrote: > > Pavel Krivanek-3 wrote >> In that cases I simply make them global. > > It seems that a variable defined with a capitalized name in an inspector is > still local. How do you make it global? Something like: `Smalltalk globals > at: #MyVar put: expression`? > Yes, there was a discussion about fixing the inspectorâ¦ I have a fixâ¦ but not yet the time to integrate it: https://pharo.fogbugz.com/f/cases/20254/Playground-should-ask-to-create-cla… Marcus

Aug. 31, 2017

Re: [Pharo-users] sharing context/variables between multiple playgrounds

by Sean P. DeNigris

Pavel Krivanek-3 wrote > In that cases I simply make them global. It seems that a variable defined with a capitalized name in an inspector is still local. How do you make it global? Something like: `Smalltalk globals at: #MyVar put: expression`? ----- Cheers, Sean -- Sent from: http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html

Aug. 31, 2017

Re: [Pharo-users] The Spec UI Framework. first translation to korean finish.

by Damien Pollet

Hi Peter, On 31 August 2017 at 16:04, peter yoo <onionmixer(a)gmail.com> wrote: > > Spec git file location have "korean charactor" then book compile fail. > Yeahâ¦ non-ascii characters and spaces in file names often cause problemsâ¦ However in this case, it might be due to differences between various encodings: - what your system is using for file names - what you wrote into pillar.conf (is it UTF-8 or some korean-specific encoding?) - what pillar reads pillar.conf as (that should be UTF-8 and nothing else, in my opinion) - how Pharo converts strings to filenames (I doubt there is any conversion there, as different platforms accept and support different encodings) > 2. TeX base > ok.. can look this. > https://github.com/cdlm/sbabook > > i know polygrossia. but not use before. i can try some TeX then report > later. > I just managed to write korean characters in an sbabook document (see below, this compiles with lualatex). Unfortunately the documentation for kotex and oblivoir are all in korean so I didnt' get much out of them. It looks like simply loading kotex and picking fonts with enough international coverage is enough, though. Polyglossia has an option for korean but it conflicts with something else; maybe this is explained in the oblivoir documentation ? \documentclass{sbabook} \usepackage[cjk,hangul]{kotex} \usepackage{noto} \usepackage{polyglossia} \setmainlanguage{english} \begin{document} \section{Latin alphabet} Hello world. Äu vi parolas la esperanton? \section{CJK} (Chinese) ä½ å¥½, æ©æ¨, (Japanese) ããã«ã¡ã¯, (Korean, hangul) ìëíì¸ì. \end{document}

Aug. 31, 2017

Re: [Pharo-users] [Pillar] Pillar source code of ESUG 2015 presentation? Presentations done with Pillar?

by Cyril Ferlicot

There is some doc in the section 3.12 of the documentation https://ci.inria.fr/pharo-contribution/job/EnterprisePharoBook/lastSuccessf… I don't know if everything is here but there is some doc at least :) On Thu, Aug 31, 2017 at 4:08 PM, H. Hirzel <hannes.hirzel(a)gmail.com> wrote: > On 8/31/17, H. Hirzel <hannes.hirzel(a)gmail.com> wrote: >> A useful file which shows what is possible to do slides >> >> https://github.com/SquareBracketAssociates/PharoMooc/blob/master/Slides/1-T… > > Correction: > This file shows how to do slides with Pillar > > https://github.com/SquareBracketAssociates/PharoMooc/blob/master/Slides/1-T… > > My questions thus are specifically: > > 1. How do I do a title slide? > 2. What do I do inside the ${....}$ . > Where do I find documentation on the options for these $ enclosed commands? > > --Hannes > -- Cyril Ferlicot https://ferlicot.fr http://www.synectique.eu 2 rue Jacques PrÃ©vert 01, 59650 Villeneuve d'ascq France

Aug. 31, 2017

Re: [Pharo-users] [Pillar] Pillar source code of ESUG 2015 presentation? Presentations done with Pillar?

by H. Hirzel

On 8/31/17, H. Hirzel <hannes.hirzel(a)gmail.com> wrote: > A useful file which shows what is possible to do slides > > https://github.com/SquareBracketAssociates/PharoMooc/blob/master/Slides/1-T… Correction: This file shows how to do slides with Pillar https://github.com/SquareBracketAssociates/PharoMooc/blob/master/Slides/1-T… My questions thus are specifically: 1. How do I do a title slide? 2. What do I do inside the ${....}$ . Where do I find documentation on the options for these $ enclosed commands? --Hannes

Aug. 31, 2017

Re: [Pharo-users] The Spec UI Framework. first translation to korean finish.

by peter yoo

1. compile error report ok i found error cause. look this. ================================ onion@coreonion:/mnt/USERDISK/onion/99_SpecUIíê¸/BuildingUIWithSpec$ make book git submodule update --init mkdir -p ./book-result find . -type d -path ./book-result/ -prune -o -wholename "*/figures" -exec rsync -rR {} ./book-result \; find: warning: -path ./book-result/ will not match anything because it ends with /. cp -R support ./book-result cp .latexmkrc ./book-result ./pillar export --to="latex:sbabook" --outputFile=SpecBooklet SpecBooklet.pillar CCConfigurationError: /mnt/USERDISK/onion/99_SpecUIÃâ¢ÅÃªÂ¸â¬/BuildingUIWithSpec is not a valid directory. PRPillarConfiguration(CCConfiguration)>>error: PRPillarConfiguration(CCConfiguration)>>toDirectory: PRPillarConfiguration(CCConfiguration)>>baseDirectory: ================================ Spec git file location have "korean charactor" then book compile fail. only use location then can compile. and no problem. 2. TeX base ok.. can look this. https://github.com/cdlm/sbabook i know polygrossia. but not use before. i can try some TeX then report later. thanks for community. :D

Aug. 31, 2017

Re: [Pharo-users] [Pillar] Pillar source code of ESUG 2015 presentation? Presentations done with Pillar?

by H. Hirzel

A useful file which shows what is possible to do slides https://github.com/SquareBracketAssociates/PharoMooc/blob/master/Slides/1-T… But nothing about the first slide. Another question: ${ ... something }$ is used to tell Pillar that a new slide is defined and the title is set ${slide:title=Getting a Feel About Syntax}$ What are options to use within ${ ... something }$ ? The pillar tutorial in the Enterprise book [1] does not mention this. --Hannes [1] https://ci.inria.fr/pharo-contribution/job/EnterprisePharoBook/lastSuccessf… On 8/31/17, Cyril Ferlicot <cyril.ferlicot(a)gmail.com> wrote: > Hi, > > I did not check but the first slide is probably written in beamer > direcly. It must be in the template of the slides. > > On Thu, Aug 31, 2017 at 2:53 PM, H. Hirzel <hannes.hirzel(a)gmail.com> wrote: >> Thank yous. >> >> I wonder how the image (or two images?) in the title slide were added. >> >> Example: >> PDF >> >> http://rmod-pharo-mooc.lille.inria.fr/MOOC/Slides/Week1/C019-W1S05-PharoSyn… >> Pillar source: >> https://github.com/SquareBracketAssociates/PharoMooc/blob/master/Slides/Wee… >> >> The code of the first slide contains the meta information, i.e. there >> must be a title template somewhere. Is the template defined within the >> image or is it a separate file outside in the working directory? I did >> not find it yet. >> >> >> Below in { .. } is the definition of the title slide. >> Then >> ${slide:title=Getting a Feel About Syntax}$ >> starts a regular slide. >> >> >> >> { >> "title":"Pharo Syntax in a Nutshell", >> "slidesid":"W1S05" >> } >> >> >> ${slide:title=Getting a Feel About Syntax}$ >> >> Give you the general feel to get started: >> - Overview of syntactical elements and constructs >> - Three kinds of messages to minimize parentheses >> - Overview of block syntax >> This lecture is an ""overview"" >> No stress if you do not get it right now! >> We will repeat in future lectures >> ${slide:title=The Complete Syntax on a Postcard}$ >> No need to understand everything! >> But "everything" is on this screen :) >> >> >> --Hannes >> >> > > > > -- > Cyril Ferlicot > https://ferlicot.fr > > http://www.synectique.eu > 2 rue Jacques PrÃ©vert 01, > 59650 Villeneuve d'ascq France > >

Aug. 31, 2017

Re: [Pharo-users] [Pillar] Pillar source code of ESUG 2015 presentation? Presentations done with Pillar?

by Cyril Ferlicot

Hi, I did not check but the first slide is probably written in beamer direcly. It must be in the template of the slides. On Thu, Aug 31, 2017 at 2:53 PM, H. Hirzel <hannes.hirzel(a)gmail.com> wrote: > Thank yous. > > I wonder how the image (or two images?) in the title slide were added. > > Example: > PDF > http://rmod-pharo-mooc.lille.inria.fr/MOOC/Slides/Week1/C019-W1S05-PharoSyn… > Pillar source: https://github.com/SquareBracketAssociates/PharoMooc/blob/master/Slides/Wee… > > The code of the first slide contains the meta information, i.e. there > must be a title template somewhere. Is the template defined within the > image or is it a separate file outside in the working directory? I did > not find it yet. > > > Below in { .. } is the definition of the title slide. > Then > ${slide:title=Getting a Feel About Syntax}$ > starts a regular slide. > > > > { > "title":"Pharo Syntax in a Nutshell", > "slidesid":"W1S05" > } > > > ${slide:title=Getting a Feel About Syntax}$ > > Give you the general feel to get started: > - Overview of syntactical elements and constructs > - Three kinds of messages to minimize parentheses > - Overview of block syntax > This lecture is an ""overview"" > No stress if you do not get it right now! > We will repeat in future lectures > ${slide:title=The Complete Syntax on a Postcard}$ > No need to understand everything! > But "everything" is on this screen :) > > > --Hannes > > -- Cyril Ferlicot https://ferlicot.fr http://www.synectique.eu 2 rue Jacques PrÃ©vert 01, 59650 Villeneuve d'ascq France

Aug. 31, 2017

Re: [Pharo-users] [Pillar] Pillar source code of ESUG 2015 presentation? Presentations done with Pillar?

by H. Hirzel

Thank yous. I wonder how the image (or two images?) in the title slide were added. Example: PDF http://rmod-pharo-mooc.lille.inria.fr/MOOC/Slides/Week1/C019-W1S05-PharoSyn… Pillar source: https://github.com/SquareBracketAssociates/PharoMooc/blob/master/Slides/Wee… The code of the first slide contains the meta information, i.e. there must be a title template somewhere. Is the template defined within the image or is it a separate file outside in the working directory? I did not find it yet. Below in { .. } is the definition of the title slide. Then ${slide:title=Getting a Feel About Syntax}$ starts a regular slide. { "title":"Pharo Syntax in a Nutshell", "slidesid":"W1S05" } ${slide:title=Getting a Feel About Syntax}$ Give you the general feel to get started: - Overview of syntactical elements and constructs - Three kinds of messages to minimize parentheses - Overview of block syntax This lecture is an ""overview"" No stress if you do not get it right now! We will repeat in future lectures ${slide:title=The Complete Syntax on a Postcard}$ No need to understand everything! But "everything" is on this screen :) --Hannes On 8/29/17, Stephane Ducasse <stepharo.self(a)gmail.com> wrote: > except the slides 2 and 3 of the first week :) > But else all the mooc: slides, exercises were made in Pillar > > On Tue, Aug 29, 2017 at 3:39 PM, Peter UhnÃ¡k <i.uhnak(a)gmail.com> wrote: >> All Pharo Mooc slides were made in pillar >> >> e.g. >> >> pillar: >> https://github.com/SquareBracketAssociates/PharoMooc/blob/master/Slides/Wee… >> >> output: >> http://rmod-pharo-mooc.lille.inria.fr/MOOC/Slides/Week3/C019-W3S03-Basic-Va… >> >> ( mooc.pharo.org ) >> >> Peter >> >> On Tue, Aug 29, 2017 at 2:54 PM, H. Hirzel <hannes.hirzel(a)gmail.com> >> wrote: >>> >>> Hello >>> >>> On the slide 14 of the Pillar presentation at ESUG 2015 [1] it says >>> that the presentation was made with Pillar. Is the Pillar source code >>> available somewhere? >>> >>> Other source code examples of presentations made with Pillar are fine as >>> well. >>> >>> Thank you >>> >>> Hannes Hirzel >>> >>> >>> [1] >>> http://esug.org/data/ESUG2015/4%20thursday/1600-1630%20Pilar/Pillar.pdf >>> >> > >

Aug. 31, 2017

Re: [Pharo-users] [Pillar] How do I open the Pillar editor in Pharo 6?

by H. Hirzel

On 8/30/17, Offray Vladimir Luna CÃ¡rdenas <offray.luna(a)mutabit.com> wrote: > Works pretty well! See the screen below. Confirmation that it works well. First it did not but in a pristine image done with curl get.pharo.org | bash (Ubuntu 14.04) then in a Pharo playground Metacello new smalltalkhubUser: 'Pier' project: 'Pillar'; configuration: 'Pillar'; version: #stable; load. The Pillar editor works fine, see screen shot. Many thanks to Doru for the info about the Pillar installation invocation! (Not sure about the status of the Pillar Pharo 6 catalog entry, two weeks ago the Pillar editor did not work). --Hannes

Aug. 31, 2017