- Pharo-users - lists.pharo.org

[DesktopManager] Ctlr - D (do-it) is blocked after installation of desktop manager

by Torsten Bergmann

>How can I de-activate the ctrl-D shortcut for the Desktop manager for >the time being? By not using DesktopManager. The shortcut handlers are installed upon load initialize. Bye T.

Sept. 5, 2017

Write documentation with wiki like syntax -- how do I activate the rendering?

by Torsten Bergmann

Hi Hannes, make sure - it is a class side method - you have no spaces before the ! marks - you reopen the help browser then it works and creates subtopics. See screenshot attached. Bye T.

Sept. 5, 2017

Re: [Pharo-users] Write documentation with wiki like syntax -- how do I activate the rendering?

by Stephane Ducasse

Hi Hannes I do not know. I do not remember who wrote this help. Stef On Mon, Sep 4, 2017 at 12:01 PM, H. Hirzel <hannes.hirzel(a)gmail.com> wrote: > P.S. wiki syntax rendering does not work in > > a) an image where Pillar is not installed. > b) an image where Pillar is installed. > > Should <wikiStyleHelp> work in Pharo 6.0/6.1 or is the implementation > planned for a later version? > > On 9/4/17, H. Hirzel <hannes.hirzel(a)gmail.com> wrote: >> Hello >> >> The Pharo 6.1 help system has an entry >> 'Write documentation with wiki like syntax' [1] >> >> If I follow these instructions my book named 'The name of the book I >> want to write' >> >> appears in as an entry in the list. >> >> But the wiki content is not rendered. >> >> Which additional steps are needed so that the wiki content is rendered? >> >> I want to get a result such as the 'Welcome to Pharo 6' page, see screen >> shot. >> >> >> Thank you for the answer in advance. >> >> Hannes >> >> >> >> >> >> [1] Usage: >> >> - Create a class-side method on the class you want to put documentation. >> - Add the pragma <wikiStyleHelp:> with the title of the book as parameter >> - The method should answer the documentation as a String (using Pier >> syntax. See http://www.piercms.com/doc/syntax ). >> >> >> >> Example: >> >> MyClass class>>aMethod >> <wikiStyleHelp: #'The name of the book I want to write'> >> ^ ' >> ! Section 1 >> >> Some text for this section >> >> !! Subsection 1.1 >> !!! Subsection 1.1.1 >> !! Subsection 1.2 >> ! Section 2' >> >

Sept. 4, 2017

Re: [Pharo-users] [Pharo-dev] The mooc is looking for forum moderators

by Myroslava Romaniuk

Hi I would like to help too, if possible. On 2 September 2017 at 22:33, Rene Paul Mages (ramix) <pharo(a)rmages.com> wrote: > > > Le 01/09/2017 Ã 11:40, Serge Stinckwich a Ã©crit : > > I should be able to help like last year. > > Count me also in the forum moderators team. > > -- > Amicalement. > Rene Paul Mages ( GnuPG_key 1024D/2CC455D9 ) > http://blog.pharo.fr > > -- Ð Ð¿Ð¾Ð²Ð°Ð³Ð¾Ñ, ÐÐ¸ÑÐ¾ÑÐ»Ð°Ð²Ð° Ð Ð¾Ð¼Ð°Ð½ÑÐº.

Sept. 4, 2017

Re: [Pharo-users] [Pharo-dev] [ann] moldable editor - transcript with adornments

by Alexandre Bergel

Pretty cool! -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > On Sep 3, 2017, at 8:54 PM, Tudor Girba <tudor(a)tudorgirba.com> wrote: > > Hi, > > We are happy to announce that the moldable editor helped us create a richer transcript: GT Transcript. > > The transcript is traditionally a stream of plain text. As we now have an elaborate editor, we can take advantage of it to help us display richer representations. > > The API is backward compatible with the existing transcript. To enable the new features, we introduced a builder. For example: > transcript nextPutAll: âsomethingâ > becomes > transcript next putAll: âsomethingâ > and after #next we can add multiple attributes that we want to affect the following insertion of a text. > > Below you can find an example detailing most of the API. The most notable additions is the support for expandable adornments. For example, #showException: provides an in-place expansion of the stack of the exception context. > > <transcript-api.png> > > To get an idea of how this tool can be useful, take a look at the following video showing the visual logging of a Bloc animation: > https://youtu.be/9VATYNaLwJY > > <transcript-animation.png> > > The code can be found in the new incarnation of GToolkit: > Iceberg enableMetacelloIntegration: true. > Metacello new > baseline: 'GToolkit'; > repository: 'github://feenkcom/gtoolkit/src'; > load. > > Cheers, > The feenk team > > -- > www.tudorgirba.com > www.feenk.com > > âSoftware has no shape. Actually, it has no one shape. It has many." >

Sept. 4, 2017

Re: [Pharo-users] [DesktopManager] Ctlr - D (do-it) is blocked after installation of desktop manager

by H. Hirzel

Hello Torsten Thank you for the explanation. How can I de-activate the ctrl-D shortcut for the Desktop manager for the time being? I'd like ctrl-D only execute the 'do -it'. Hitting 'ctrl-D' twice with the desktop manager installed did not work for some reason. And it is inconvenient. Because do-it is a much more frequent operation for me than switching the desktop. Kind regards Hannes On 9/4/17, Tim Mackinnon <tim(a)testit.works> wrote: > Interesting, but how is it that Ctrl-B works for Browse and is also a meta > key for Ctrl-B + Ctlr+N? I think there is a a way to support both - whether > its worth it is another question (and I suspect the complication of > supporting it might not be worthwhile, and some of the old key combinations > like Ctrl-B and Ctrl-N might need deprecating as there are meta key > equivalents as when I looked through the existing code it is quite > complicated and in need of a cleanup). > > Tim > >> On 4 Sep 2017, at 10:52, Torsten Bergmann <astares(a)gmx.de> wrote: >> >> Hi Hannes, >> >> The desktop manager uses "key combinations" always starting with CTRL+D >> (like "Desktop") >> so one can easily remember the possibilities: >> >> CTRL + D followed by CTRL + DââââDesktop Displayâ to display and switch >> between all desktops >> CTRL + D followed by CTRL + AââââDesktop Addâ to add a new desktop >> CTRL + D followed by CTRL + NââââDesktop Nextâ to go to next desktop >> CTRL + D followed by CTRL + PââââDesktop Previousâ to go to previous >> desktop >> CTRL + D followed by CTRL + BââââDesktop Backgroundâ to choose a >> background >> CTRL + D followed by CTRL + FââââDesktop Fullscreenâ to switch fullscreen >> option >> >> as can be seen in >> >> https://www.youtube.com/watch?v=zpLY7uQnPsg >> >> but unfortunately CTRL+D ("single key") is also used for the "do it" in a >> playground. >> >> As the shortcut handler of the desktop manager is only triggered when the >> full key sequence is >> pressed the code can only check if the active hand is in an editor and >> allow the do it then. >> At least that is the only solution I've found to this problem so far. >> >> This leads to the unfortunate effect you have to press CTRL+D twice in the >> playground once the desktop >> manager is loaded. >> >> But nonetheless the "do it" is still possible - you only have to hit >> CTRL+D twice in the playground. >> Hope this helps! >> >> Bye >> T. >> > > >

Sept. 4, 2017

Re: [Pharo-users] Gofer loads wrong version?

by Herby VojÄÃk

Herby VojÄÃk wrote: > Hello! > > As I need to load specific version of Glorp with my fix, and I did not > find out how to force-override it in my baseline, I tried to load it > post-the-baseline via Gofer: > > (Gofer new smalltalkhubUser: 'DBXTalk' project: 'Glorp') > package: 'Glorp'; > version: 'Glorp-HerbyVojcik.127'; > load. > > But it actually looks like this: [see attached bogusgofer.png]. > > OTOH, after the image loads the tests pass and monticello browser looks > like this: [see attached mbloaded127.png]. > > Am I doing something wrong? I am a bit afraid what is actually loaded / > if it won't break b/c of inconsistent state. P.S.: Epicea shows "Loading 127 and 129". I only wanted to load 127. ??? > Herby

Sept. 4, 2017

Gofer loads wrong version?

by Herby VojÄÃk

Hello! As I need to load specific version of Glorp with my fix, and I did not find out how to force-override it in my baseline, I tried to load it post-the-baseline via Gofer: (Gofer new smalltalkhubUser: 'DBXTalk' project: 'Glorp') package: 'Glorp'; version: 'Glorp-HerbyVojcik.127'; load. But it actually looks like this: [see attached bogusgofer.png]. OTOH, after the image loads the tests pass and monticello browser looks like this: [see attached mbloaded127.png]. Am I doing something wrong? I am a bit afraid what is actually loaded / if it won't break b/c of inconsistent state. Herby

Sept. 4, 2017

Re: [Pharo-users] Write documentation with wiki like syntax -- how do I activate the rendering?

by H. Hirzel

P.S. wiki syntax rendering does not work in a) an image where Pillar is not installed. b) an image where Pillar is installed. Should <wikiStyleHelp> work in Pharo 6.0/6.1 or is the implementation planned for a later version? On 9/4/17, H. Hirzel <hannes.hirzel(a)gmail.com> wrote: > Hello > > The Pharo 6.1 help system has an entry > 'Write documentation with wiki like syntax' [1] > > If I follow these instructions my book named 'The name of the book I > want to write' > > appears in as an entry in the list. > > But the wiki content is not rendered. > > Which additional steps are needed so that the wiki content is rendered? > > I want to get a result such as the 'Welcome to Pharo 6' page, see screen > shot. > > > Thank you for the answer in advance. > > Hannes > > > > > > [1] Usage: > > - Create a class-side method on the class you want to put documentation. > - Add the pragma <wikiStyleHelp:> with the title of the book as parameter > - The method should answer the documentation as a String (using Pier > syntax. See http://www.piercms.com/doc/syntax ). > > > > Example: > > MyClass class>>aMethod > <wikiStyleHelp: #'The name of the book I want to write'> > ^ ' > ! Section 1 > > Some text for this section > > !! Subsection 1.1 > !!! Subsection 1.1.1 > !! Subsection 1.2 > ! Section 2' >

Sept. 4, 2017

Re: [Pharo-users] [DesktopManager] Ctlr - D (do-it) is blocked after installation of desktop manager

by Tim Mackinnon

Interesting, but how is it that Ctrl-B works for Browse and is also a meta key for Ctrl-B + Ctlr+N? I think there is a a way to support both - whether its worth it is another question (and I suspect the complication of supporting it might not be worthwhile, and some of the old key combinations like Ctrl-B and Ctrl-N might need deprecating as there are meta key equivalents as when I looked through the existing code it is quite complicated and in need of a cleanup). Tim > On 4 Sep 2017, at 10:52, Torsten Bergmann <astares(a)gmx.de> wrote: > > Hi Hannes, > > The desktop manager uses "key combinations" always starting with CTRL+D (like "Desktop") > so one can easily remember the possibilities: > > CTRL + D followed by CTRL + DââââDesktop Displayâ to display and switch between all desktops > CTRL + D followed by CTRL + AââââDesktop Addâ to add a new desktop > CTRL + D followed by CTRL + NââââDesktop Nextâ to go to next desktop > CTRL + D followed by CTRL + PââââDesktop Previousâ to go to previous desktop > CTRL + D followed by CTRL + BââââDesktop Backgroundâ to choose a background > CTRL + D followed by CTRL + FââââDesktop Fullscreenâ to switch fullscreen option > > as can be seen in > > https://www.youtube.com/watch?v=zpLY7uQnPsg > > but unfortunately CTRL+D ("single key") is also used for the "do it" in a playground. > > As the shortcut handler of the desktop manager is only triggered when the full key sequence is > pressed the code can only check if the active hand is in an editor and allow the do it then. > At least that is the only solution I've found to this problem so far. > > This leads to the unfortunate effect you have to press CTRL+D twice in the playground once the desktop > manager is loaded. > > But nonetheless the "do it" is still possible - you only have to hit CTRL+D twice in the playground. > Hope this helps! > > Bye > T. >

Sept. 4, 2017