September 2018 - Pharo-users

Re: [Pharo-users] Ready to use Roassal?

by Peter Uhnak

Not sure if this is already fixed in P7, but in P6 sometimes the catalog would not load properly... so one has to close pharo and open it again... probably not the best experience for non-pharo user. Also, if your user is using linux, they also need to have libcairo(i386) installed, otherwise Roassal will not work. Peter On Sun, Sep 9, 2018 at 2:16 PM Hilaire <hilaire(a)drgeo.eu> wrote: > Hello Alexandre, > > Afterward, I have indicated that to this non-pharo user. > > > Le 09/09/2018 Ã 11:36, Alexandre Bergel via Pharo-users a Ã©crit : > > The agilevisualization.com website says: > > > > "Installing Roassal is easy. You need to install Pharo. Open the Catalog > browser, and select Roassal. A video illustrating these steps is online.â > > > > How can I improve the installation instruction? > > > > Also, the Quickstart chapter details the steps: > > > http://agilevisualization.com/AgileVisualization/QuickStart/0101-QuickStart… > I was confused as I did not find this zip file ready to download, as > described in this quick start page. > > Hilaire > > -- > Dr. Geo > http://drgeo.eu > > > >

Sept. 9, 2018

Re: [Pharo-users] [Pharo-dev] Pharo and Docker (some steps)

by Pierce Ng

On Mon, Aug 20, 2018 at 03:10:58PM +0200, Torsten Bergmann wrote: > I recently played with Pharo and Docker and summarized some of my > steps in a small tutorial in my Pharo wiki: Monkey saw, and monkey did. :-) Here's my report on my experimentation: http://www.samadhiweb.com/blog/2018.09.09.docker.html Pierce

Sept. 9, 2018

Re: [Pharo-users] Ready to use Roassal?

by Hilaire

Hello Alexandre, Afterward, I have indicated that to this non-pharo user. Le 09/09/2018 Ã 11:36, Alexandre Bergel via Pharo-users a Ã©critÂ : > The agilevisualization.com website says: > > "Installing Roassal is easy. You need to install Pharo. Open the Catalog browser, and select Roassal. A video illustrating these steps is online.â > > How can I improve the installation instruction? > > Also, the Quickstart chapter details the steps: > http://agilevisualization.com/AgileVisualization/QuickStart/0101-QuickStart… I was confused as I did not find this zip file ready to download, as described in this quick start page. Hilaire -- Dr. Geo http://drgeo.eu

Sept. 9, 2018

Re: [Pharo-users] Ready to use Roassal?

by Alexandre Bergel

Hi Hilaire, > Is there a ready to download and to use Roassal for end user? I am not sure what you mean. For non-pharo user? > I found nothing on http://agilevisualization.com/ I can point a user to. > User unaware of Pharo, Smalltalk, etc. The agilevisualization.com website says: "Installing Roassal is easy. You need to install Pharo. Open the Catalog browser, and select Roassal. A video illustrating these steps is online.â How can I improve the installation instruction? Also, the Quickstart chapter details the steps: http://agilevisualization.com/AgileVisualization/QuickStart/0101-QuickStart… Cheers, Alexandre

Sept. 9, 2018

Re: [Pharo-users] memorizing data between tests

by Ben Coman

That seems to be exactly what I'm looking for. Thanks Peter. cheers -ben On Sun, 9 Sep 2018 at 16:11, Peter Uhnak <i.uhnak(a)gmail.com> wrote: > Hi Ben, > > take a look at TestResource (its comment and subclasses). It should do > what you are looking for. > > Peter > > On Sun, Sep 9, 2018 at 8:08 AM Ben Coman <btc(a)openinworld.com> wrote: > >> Say I want to write ten tests for different aspects of a web service >> point. >> Apart from the risk of relying on an external service, >> I'd like to poll the web service once rather than ten times. >> I wondering about the feasibility of memorizing data between test methods. >> Taking for example... >> TestCase subclass: #MyTest ... >> >> My understanding is that MyTest >> setUp is run once per test method. >> What I guess is missing is a #groupSetup that would be called at the >> start of a running a group of tests. >> >> MyTest >> groupSetup >> memorized := Dictionary new. >> >> MyTest >> getLiveDataOncePerRun >> ^ memorized at: 'data' ifAbsentPut: [ZnClient new get: ' >> http://someservice.com/liveData1'. >> >> MyTest >> test1 >> |data| >> data := self getLiveDataOncePerRun . >> self assert: data result1 equals: 'expected result 1' >> >> MyTest >> test2 >> |data| >> data := self getLiveDataOncePerRun. >> self assert: data result2 equals: 'expected result 2' >> >> cheers -ben >> >>

Sept. 9, 2018

Re: [Pharo-users] memorizing data between tests

by Peter Uhnak

Hi Ben, take a look at TestResource (its comment and subclasses). It should do what you are looking for. Peter On Sun, Sep 9, 2018 at 8:08 AM Ben Coman <btc(a)openinworld.com> wrote: > Say I want to write ten tests for different aspects of a web service point. > Apart from the risk of relying on an external service, > I'd like to poll the web service once rather than ten times. > I wondering about the feasibility of memorizing data between test methods. > Taking for example... > TestCase subclass: #MyTest ... > > My understanding is that MyTest >> setUp is run once per test method. > What I guess is missing is a #groupSetup that would be called at the start > of a running a group of tests. > > MyTest >> groupSetup > memorized := Dictionary new. > > MyTest >> getLiveDataOncePerRun > ^ memorized at: 'data' ifAbsentPut: [ZnClient new get: ' > http://someservice.com/liveData1'. > > MyTest >> test1 > |data| > data := self getLiveDataOncePerRun . > self assert: data result1 equals: 'expected result 1' > > MyTest >> test2 > |data| > data := self getLiveDataOncePerRun. > self assert: data result2 equals: 'expected result 2' > > cheers -ben > >

Sept. 9, 2018

memorizing data between tests

by Ben Coman

Say I want to write ten tests for different aspects of a web service point. Apart from the risk of relying on an external service, I'd like to poll the web service once rather than ten times. I wondering about the feasibility of memorizing data between test methods. Taking for example... TestCase subclass: #MyTest ... My understanding is that MyTest >> setUp is run once per test method. What I guess is missing is a #groupSetup that would be called at the start of a running a group of tests. MyTest >> groupSetup memorized := Dictionary new. MyTest >> getLiveDataOncePerRun ^ memorized at: 'data' ifAbsentPut: [ZnClient new get: ' http://someservice.com/liveData1'. MyTest >> test1 |data| data := self getLiveDataOncePerRun . self assert: data result1 equals: 'expected result 1' MyTest >> test2 |data| data := self getLiveDataOncePerRun. self assert: data result2 equals: 'expected result 2' cheers -ben

Sept. 9, 2018

Camp Smalltalk Sunday in Cagliari

by CÃ©drick BÃ©ler

Hi all, Just to inform that a Camp Smalltalk will be at the terrace of the CaffÃ¨ delle Arti starting at 10am. CaffÃ¨ delle Arti Via del Fossario, 1, 09124 Cagliari CA, Italie +39 392 396 3958 https://goo.gl/maps/WMRhdSCeZL62 Feel free to join

Sept. 8, 2018

Re: [Pharo-users] Ready to use Roassal?

by H. Hirzel

On 9/8/18, H. Hirzel <hannes.hirzel(a)gmail.com> wrote: > An easy to way to get it: > > It is included in the 'Moose Suite' distribution available through the > 'Pharo Launcher'. This is what you get when you go to http://pharo.org/web/download works very fine on Linux (Ubuntu 16.04 in my case) > > Another option is to load it through the catalog: > > see recent question on this list --Fri, Aug 24, 2018 > > Subject: Roassal installation in Pharo 6.1 through the catalog? > > > --Hannes > > > > > On 9/8/18, Hilaire <hilaire(a)drgeo.eu> wrote: >> Hi, >> >> Is there a ready to download and to use Roassal for end user? >> >> I found nothing on http://agilevisualization.com/ I can point a user to. >> User unaware of Pharo, Smalltalk, etc. >> >> Closest things I found is http://moosetechnology.org/#install. And >> likely instructions will not work for a linux user. >> >> Thanks >> >> Hilaire >> >> -- >> Dr. Geo >> http://drgeo.eu >> >> >> >> >

Sept. 8, 2018

Re: [Pharo-users] Ready to use Roassal?

by H. Hirzel

An easy to way to get it: It is included in the 'Moose Suite' distribution available through the 'Pharo Launcher'. Another option is to load it through the catalog: see recent question on this list --Fri, Aug 24, 2018 Subject: Roassal installation in Pharo 6.1 through the catalog? --Hannes On 9/8/18, Hilaire <hilaire(a)drgeo.eu> wrote: > Hi, > > Is there a ready to download and to use Roassal for end user? > > I found nothing on http://agilevisualization.com/ I can point a user to. > User unaware of Pharo, Smalltalk, etc. > > Closest things I found is http://moosetechnology.org/#install. And > likely instructions will not work for a linux user. > > Thanks > > Hilaire > > -- > Dr. Geo > http://drgeo.eu > > > >

Sept. 8, 2018