April 2018 - Pharo-users - lists.pharo.org

Re: [Pharo-users] [SmalltalkCI] loading tonel dependencies?

by Bernardo Ezequiel Contreras

in a fresh 6.1 image , i did this Metacello new baseline: 'EarleyParser'; repository: 'github://vonbecmann/earley-parser/repository'; load. expression in the playground and it works. so there's something bogus in smalltalkCI. On Wed, Apr 11, 2018 at 9:14 PM, Gabriel Cotelli <g.cotelli(a)gmail.com> wrote: > If Iceberg enableMetacelloIntegration is true the load seems to work. But > I think smalltalkCI disabled it for Pharo (see disableIcebergDuring: ). I > don't know why. > > On Wed, Apr 11, 2018 at 6:40 PM, Bernardo Ezequiel Contreras < > vonbecmann(a)gmail.com> wrote: > >> peter, >> are you sure that dependencies of a project in tonel format can be >> loaded? >> >> earley-parser -> linked-list >> >> see https://travis-ci.org/vonbecmann/earley-parser/builds/365332549 >> >> thanks in advance >> >> -- >> Bernardo E.C. >> >> Sent from a cheap desktop computer in South America. >> > > -- Bernardo E.C. Sent from a cheap desktop computer in South America.

April 12, 2018

Re: [Pharo-users] [SmalltalkCI] loading tonel dependencies?

by Gabriel Cotelli

If Iceberg enableMetacelloIntegration is true the load seems to work. But I think smalltalkCI disabled it for Pharo (see disableIcebergDuring: ). I don't know why. On Wed, Apr 11, 2018 at 6:40 PM, Bernardo Ezequiel Contreras < vonbecmann(a)gmail.com> wrote: > peter, > are you sure that dependencies of a project in tonel format can be loaded? > > earley-parser -> linked-list > > see https://travis-ci.org/vonbecmann/earley-parser/builds/365332549 > > thanks in advance > > -- > Bernardo E.C. > > Sent from a cheap desktop computer in South America. >

April 12, 2018

Re: [Pharo-users] [SmalltalkCI] loading tonel dependencies?

by Gabriel Cotelli

Looks more like a Metacello issue. I think smalltalkCI has no control at this point. Probably is the first time someone has a tonel dependency directly from GitHub. If you load your project using just the Metacello API in the playground you should get the same behavior. On Wed, Apr 11, 2018 at 6:40 PM, Bernardo Ezequiel Contreras < vonbecmann(a)gmail.com> wrote: > peter, > are you sure that dependencies of a project in tonel format can be loaded? > > earley-parser -> linked-list > > see https://travis-ci.org/vonbecmann/earley-parser/builds/365332549 > > thanks in advance > > -- > Bernardo E.C. > > Sent from a cheap desktop computer in South America. >

April 12, 2018

migration to 6.1 was super easy.

by PAUL DEBRUICKER

Thanks for all the hard work. It took me about 30 minutes to migrate one of my projects from 32bit Pharo 5 to 64bit 6.1 this afternoon. It has about 40 external dependencies so I thought it would take much longer to get everything sorted.

April 12, 2018

[SmalltalkCI] loading tonel dependencies?

by Bernardo Ezequiel Contreras

peter, are you sure that dependencies of a project in tonel format can be loaded? earley-parser -> linked-list see https://travis-ci.org/vonbecmann/earley-parser/builds/365332549 thanks in advance -- Bernardo E.C. Sent from a cheap desktop computer in South America.

April 11, 2018

Re: [Pharo-users] installation of packages on 6.1

by herby＠mailbox.sk

But it's not easy, as you need username and password and that can be different for each URL. So ssh (with one key) is easier for write-access, IMO. Https is much easier for read(-only) access. On April 11, 2018 11:25:55 PM GMT+02:00, herby(a)mailbox.sk wrote: >Yes, sorry, of course technically you can use https access to push as >well, I just didn't use it for that purpose for long as I always use >ssh for that and so only use of https was to read public repos without >need for authorization. > > >On April 11, 2018 11:21:29 PM GMT+02:00, "Peter UhnÃ¡k" ><i.uhnak(a)gmail.com> wrote: >>> >>> The con is the âread-onlyâ >>> >> >>They are _not_ read-only. If you want to push, they will use http auth >>for >>authentication. (Obviously you need an account for pushing, but that's >>given.) >> >>Peter

April 11, 2018

Re: [Pharo-users] installation of packages on 6.1

by herby＠mailbox.sk

Yes, sorry, of course technically you can use https access to push as well, I just didn't use it for that purpose for long as I always use ssh for that and so only use of https was to read public repos without need for authorization. On April 11, 2018 11:21:29 PM GMT+02:00, "Peter UhnÃ¡k" <i.uhnak(a)gmail.com> wrote: >> >> The con is the âread-onlyâ >> > >They are _not_ read-only. If you want to push, they will use http auth >for >authentication. (Obviously you need an account for pushing, but that's >given.) > >Peter

April 11, 2018

Re: [Pharo-users] installation of packages on 6.1

by Peter UhnÃ¡k

> > The con is the âread-onlyâ > They are _not_ read-only. If you want to push, they will use http auth for authentication. (Obviously you need an account for pushing, but that's given.) Peter

April 11, 2018

Re: [Pharo-users] installation of packages on 6.1

by herby＠mailbox.sk

To make things merrier, when you set procotol to https, you don't need anything of the cruft from before: no ssh keys, no setting up an account, setting git username etc. You get read-only access to all public github:// and bitbucket:// repos with no additional setup. The con is the âread-onlyâ - you cannot (easily) develop / contribute to them. But if your only concern is to be able to load dependencies, setting protocol to https is easiest way to go. Herby On April 11, 2018 11:23:24 AM GMT+02:00, "Herbert VojÄÃk" <herby(a)mailbox.sk> wrote: >No, it is possible to install them without github account. > >You need to set protocol to https: > >Iceberg enableMetacelloIntegration: true; remoteTypeSelector: >#httpsUrl. > >Herby > >Baveco, Hans wrote: >> Thanks Ben! >> >> I created a github account, installed git and git bash, created SSH >> keys, added keys to my github account, and changed the settings in >> Pharo to use these keys, and finally was able to install the packages > >> I wanted to try. (roassal2 still not installing though). >> >> Question remains, is this really the only way to get these packages >> that live on github into the image? I had no plans to work with >> git/github, but was now forced to spent quite some time on it.... >> >> Cheers, >> >> Hans >> >> *From:*Ben Coman <btc(a)openinworld.com> >> *Sent:* maandag 9 april 2018 22:54 >> *To:* Any question about pharo is welcome ><pharo-users(a)lists.pharo.org> >> *Subject:* Re: [Pharo-users] installation of packages on 6.1 >> >> On 6 April 2018 at 00:02, Baveco, Hans <hans.baveco@ >wur.nl >> <mailto:hans.baveco@wur.nl>> wrote: >> >> Trying to install Territorial the installation got stuck on the >> installation of Roassal2 1.35, with error >âLGitObjectNotInitializedâ >> >> Transcript says: >> >> âProject: Roassal2 1.35 >> >> I got an error while cloning: There was an authentication error >> while trying to execute the operation: error authenticating: >> failed connecting agent. >> >> This happens usually because you didn't provide a valid set of >> credentials. >> >> You may fix this problem in different ways: >> >> 1. adding your keys to ssh-agent, executing ssh-add ~/.ssh/id_rsa >> in your command line. >> >> 2. adding your keys in settings (open settings browser search for >> "Use custom SSH keys" and >> >> add your public and private keys). >> >> 3. using HTTPS instead SSH (Just use an url in the form >> HTTPS://etc.git) I will try to clone the HTTPS variant.â >> >> I have encountered this several t >imes before, for different >> packages (on windows 7, pharo 6.1 (Image: Pharo6.0 [Latest >update: >> #60540])) and have no idea how to deal with this. >> >> Any suggestions? >> >> Hans >> >> On Windows you need to use option 2. World Menu > Settings > etc... >> >> cheers -ben >>

April 11, 2018

Re: [Pharo-users] installation of packages on 6.1

by Offray Vladimir Luna CÃ¡rdenas

Hi Baveco, You don't need all this overcomplex Git paraphernalia to install a package. I had a really unpleasant morning one day because of that and mention it on the list and was corrected for the Bloc package. Unfortunately the default documentation for some package still thinks in the painful "Git way" (TM) of getting a package. Despite that, I think that proper branching and creating a bridge with file system versioning is needed. I hope to be able to help/hold until Iceberg Fossil integration works without going the Git Way for my own package but providing the advantages of file based DVCS. Cheers, Offray On 11/04/18 04:23, Herbert VojÄÃk wrote: > No, it is possible to install them without github account. > > You need to set protocol to https: > > Â Iceberg enableMetacelloIntegration: true; remoteTypeSelector: #httpsUrl. > > Herby > > Baveco, Hans wrote: >> Thanks Ben! >> >> I created a github account, installed git and git bash, created SSH >> keys, added keys to my github account, and changed the settings in >> Pharo to use these keys, and finally was able to install the packages >> I wanted to try. (roassal2 still not installing though). >> >> Question remains, is this really the only way to get these packages >> that live on github into the image? I had no plans to work with >> git/github, but was now forced to spent quite some time on it.... >> >> Cheers, >> >> Hans >> >> *From:*Ben Coman <btc(a)openinworld.com> >> *Sent:* maandag 9 april 2018 22:54 >> *To:* Any question about pharo is welcome <pharo-users(a)lists.pharo.org> >> *Subject:* Re: [Pharo-users] installation of packages on 6.1 >> >> On 6 April 2018 at 00:02, Baveco, Hans <hans.baveco@ > wur.nl >> <mailto:hans.baveco@wur.nl>> wrote: >> >> Â Â Â Trying to install Territorial the installation got stuck on the >> Â Â Â installation of Roassal2 1.35, with error âLGitObjectNotInitializedâ >> >> Â Â Â Transcript says: >> >> Â Â Â âProject: Roassal2 1.35 >> >> Â Â Â I got an error while cloning: There was an authentication error >> Â Â Â while trying to execute the operation: error authenticating: >> Â Â Â failed connecting agent. >> >> Â Â Â This happens usually because you didn't provide a valid set of >> Â Â Â credentials. >> >> Â Â Â You may fix this problem in different ways: >> >> Â Â Â 1. adding your keys to ssh-agent, executing ssh-add ~/.ssh/id_rsa >> Â Â Â in your command line. >> >> Â Â Â 2. adding your keys in settings (open settings browser search for >> Â Â Â "Use custom SSH keys" and >> >> Â Â Â add your public and private keys). >> >> Â Â Â 3. using HTTPS instead SSH (Just use an url in the form >> Â Â Â HTTPS://etc.git) I will try to clone the HTTPS variant.â >> >> Â Â Â I have encountered this several t > imes before, for different >> Â Â Â packages (on windows 7, pharo 6.1 (Image: Pharo6.0 [Latest update: >> Â Â Â #60540])) and have no idea how to deal with this. >> >> Â Â Â Any suggestions? >> >> Â Â Â Hans >> >> On Windows you need to use option 2. World Menu > Settings > etc... >> >> cheers -ben >> > >

April 11, 2018