August 2017 - Pharo-users - lists.pharo.org

Re: [Pharo-users] YAML parser (2017)

by H. Hirzel

Hello Peter Thank you for the answer. Good news that Phil Back has an done upgraded version of the PetitYAML parser recently. I think what you describe as "mostly complete" will be very fine for my purposes. On 8/18/17, Peter Uhnak <i.uhnak(a)gmail.com> wrote: > Hi, > > Phil Back has kindly fixed the PetitYAML so it mostly works now. > The only problem I've encountered was some weird misparsing of strings > containing slashes, e.g. "5/". > > In any case: > > Install PetitParser (from Catalog or somewhere), load PetitYAML package > (this is already loaded when loading PP from catalog). I just installed Pillar and that pulled in PetitParser. Not sure if it is a good idea now to re-install PetitParser again. In particular there is only PetitParser catalog entry for Pharo 5.0, not 6.0 or 6.1 I assume that can directly load the PetitYAML from the repository instead. Where do I find it? > And then parse your string > > ``` > PPYAMLGrammar parse: ' > language: c > sudo: false > cache: > directories: > - opensmalltalk-vm/.thirdparty-cache > git: > depth: "5"'. > ``` > > > "Dictionary( > 'cache'->a Dictionary( > 'directories'->#('opensmalltalk-vm/.thirdparty-cache') > ) > 'git'->a Dictionary( > 'depth'->'5' > ) > 'language'->'c' > 'sudo'->'false' > )" > Thank you for the example. > Take a look at PPYAMLGrammarTest>>testTravisYml too. > > Peter > --Hannes

Aug. 18, 2017

Re: [Pharo-users] [Pillar] Installed the Pillar document preparation system into 6.1, how do I start using it?

by Cyril Ferlicot

On ven. 18 aoÃ»t 2017 at 21:43, H. Hirzel <hannes.hirzel(a)gmail.com> wrote: > Thank you Cyril for the link to the tutorial. > > > https://ci.inria.fr/pharo-contribution/job/EnterprisePharoBook/lastSuccessf… > > I see that Pillar is a command line tool. The welcome example taken > from this tutorial is: > > Pharo.exe Pillar.image pillar export --to=html > --outputFile=welcome welcome.pillar > > How can I run a command like this from within Pharo in a "playground" > (former workspace)? > > Later on I plan to construct a simple GUI with text boxes for Pillar > sources and have some buttons executing these commands. > > --Hannes > > I remember writing a part "Pillar from Pharo" in this doc. I'm not sure it is still up to date but you can try to check part 7 of the doc I sent. -- Cyril Ferlicot https://ferlicot.fr http://www.synectique.eu 2 rue Jacques PrÃ©vert 01, 59650 Villeneuve d'ascq France

Aug. 18, 2017

Re: [Pharo-users] [Pillar] Installed the Pillar document preparation system into 6.1, how do I start using it?

by H. Hirzel

Thank you Cyril for the link to the tutorial. https://ci.inria.fr/pharo-contribution/job/EnterprisePharoBook/lastSuccessf… I see that Pillar is a command line tool. The welcome example taken from this tutorial is: Pharo.exe Pillar.image pillar export --to=html --outputFile=welcome welcome.pillar How can I run a command like this from within Pharo in a "playground" (former workspace)? Later on I plan to construct a simple GUI with text boxes for Pillar sources and have some buttons executing these commands. --Hannes On 8/18/17, Cyril Ferlicot <cyril.ferlicot(a)gmail.com> wrote: > On ven. 18 aoÃ»t 2017 at 19:44, H. Hirzel <hannes.hirzel(a)gmail.com> wrote: > >> Hello >> >> I installed Pillar through the catalog into Pharo 6.1, I assume. >> >> I had a look into the Help browser to find some documentation or a >> link to the documentation. >> >> I did not find a menu entry in the world menu to open the tool. >> >> How do I start using the tool? >> >> --Hannes >> >> Hi, > > I did not check if it is up to date but there is a tutorial here: > > https://ci.inria.fr/pharo-contribution/job/EnterprisePharoBook/lastSuccessf… > > I hope this can help you to begin. > > There is no tool actually to use Pillar, you write your files and then > there is command lines to generate the output wanted. > -- > Cyril Ferlicot > https://ferlicot.fr > > http://www.synectique.eu > 2 rue Jacques PrÃ©vert 01, > 59650 Villeneuve d'ascq France >

Aug. 18, 2017

Re: [Pharo-users] [Pillar] Installed the Pillar document preparation system into 6.1, how do I start using it?

by Cyril Ferlicot

On ven. 18 aoÃ»t 2017 at 19:44, H. Hirzel <hannes.hirzel(a)gmail.com> wrote: > Hello > > I installed Pillar through the catalog into Pharo 6.1, I assume. > > I had a look into the Help browser to find some documentation or a > link to the documentation. > > I did not find a menu entry in the world menu to open the tool. > > How do I start using the tool? > > --Hannes > > Hi, I did not check if it is up to date but there is a tutorial here: https://ci.inria.fr/pharo-contribution/job/EnterprisePharoBook/lastSuccessf… I hope this can help you to begin. There is no tool actually to use Pillar, you write your files and then there is command lines to generate the output wanted. -- Cyril Ferlicot https://ferlicot.fr http://www.synectique.eu 2 rue Jacques PrÃ©vert 01, 59650 Villeneuve d'ascq France

Aug. 18, 2017

Re: [Pharo-users] Installation done last week: Do I have Pharo 6.0 or Pharo 6.1?

by H. Hirzel

Thanks Peter for the clarification. So this means as my 'About box' shows Pharo 6.0 version 60510 I have actually got 6.1. -- Hannes On 8/18/17, Peter Uhnak <i.uhnak(a)gmail.com> wrote: > I don't know what was the exact reasoning why it was chosen to stay this > way... > 60505 is still 6.0, so somewhere between 60506 and 60510 is the split. :-) > > Peter > > > On Fri, Aug 18, 2017 at 04:21:24PM +0200, H. Hirzel wrote: >> Hello >> >> Pharo 6.1 was released on the 24th July 2017. >> Thread [Pharo-dev] [ANN] Pharo 6.1 (summer) released! (35 messages so >> far). >> My question short: Which version do I get when installing? >> >> Last week I on the the 9th August I did >> >> curl get.pharo.org | bash >> >> on Ubuntu 14.04-32bit. Installation was done fully automated. Very >> smooth! Excellent! >> >> Just needed to do in a terminal window >> ./pharo-ui >> to start Pharo 6.x >> >> Now my question: >> >> 'Word menu' -> 'System' -> 'About' >> >> gives me >> >> Pharo 6.0 >> Latest update: #60510 >> >> >> Is the indication 'Pharo 6.0' just an omission in the release process >> and it should say 'Pharo 6.1'? >> Or did I still get 'Pharo 6.0' for some reason? >> >> Thank you for the answer in advance >> >> Hannes >> > >

Aug. 18, 2017

Re: [Pharo-users] What is proper fix for this?

by Offray Vladimir Luna CÃ¡rdenas

On 17/08/17 03:49, Herby VojÄÃk wrote: > Guillermo Polito wrote: >> >> >> Just a thought out of thin air: wasn't filetree supposed to provide >> common ground for this kind of scenarios? If we shared a single >> repository in github that would save us a lot of discussion :P > > I'd prefer on-premise git.smalltalkhub.com, but it's just me. :-( > > Is not just you. I try also to maintain my own critical infrastructure, like DVCS using Fossil, and I'm a huge promoter/believer in community own infrastructure. Would be really nice to have git.smalltalkhub.com using Gogs ( https://gogs.io/ ). The issue is that we're a small community with small resources to have our own infrastructure.... :-/. Cheers, Offray

Aug. 18, 2017

Re: [Pharo-users] Installation done last week: Do I have Pharo 6.0 or Pharo 6.1?

by Peter Uhnak

I don't know what was the exact reasoning why it was chosen to stay this way... 60505 is still 6.0, so somewhere between 60506 and 60510 is the split. :-) Peter On Fri, Aug 18, 2017 at 04:21:24PM +0200, H. Hirzel wrote: > Hello > > Pharo 6.1 was released on the 24th July 2017. > Thread [Pharo-dev] [ANN] Pharo 6.1 (summer) released! (35 messages so far). > My question short: Which version do I get when installing? > > Last week I on the the 9th August I did > > curl get.pharo.org | bash > > on Ubuntu 14.04-32bit. Installation was done fully automated. Very > smooth! Excellent! > > Just needed to do in a terminal window > ./pharo-ui > to start Pharo 6.x > > Now my question: > > 'Word menu' -> 'System' -> 'About' > > gives me > > Pharo 6.0 > Latest update: #60510 > > > Is the indication 'Pharo 6.0' just an omission in the release process > and it should say 'Pharo 6.1'? > Or did I still get 'Pharo 6.0' for some reason? > > Thank you for the answer in advance > > Hannes >

Aug. 18, 2017

Re: [Pharo-users] Pharo 6.1 catalog -- How is the catalog information updated?

by H. Hirzel

I found http://catalog.pharo.org/ and the link 'a note to developers' Following that I see that a ConfigurationOfXYZ file needs to be in http://smalltalkhub.com/mc/Pharo/MetaRepoForPharo60/main So I assume if a newer version of a ConfigurationOfXYZ is put there, the catalog information is updated in the Pharo catalog browser in the image. Is this correct? HH On 8/18/17, H. Hirzel <hannes.hirzel(a)gmail.com> wrote: > Hello > > Where do I find information how the Pharo 6.1 catalog entries are > maintained? > > Thank you in advance > > Hannes >

Aug. 18, 2017

[Pillar] Installed the Pillar document preparation system into 6.1, how do I start using it?

by H. Hirzel

Hello I installed Pillar through the catalog into Pharo 6.1, I assume. I had a look into the Help browser to find some documentation or a link to the documentation. I did not find a menu entry in the world menu to open the tool. How do I start using the tool? --Hannes

Aug. 18, 2017

Re: [Pharo-users] GTInspect auto-update in raw view?

by Andrei Chis

On Thu, Aug 17, 2017 at 9:24 AM, Esteban Lorenzano <estebanlm(a)gmail.com> wrote: > > On 17 Aug 2017, at 01:02, Aliaksei Syrel <alex.syrel(a)gmail.com> wrote: > > Hello Esteban, > > You can enable auto-refresh with: GTInspector enableStepRefresh > For performance reasons it is disabled by default. If you are curious why > I think Andrei could explain a bit more :) > > > I want to know why is disabled and more than that, when will we be able to > make it enabled by default, as before. > Mostly because it was finished just before the Pharo 6 release. I'd say we can enable it by default for Pharo 7 and see if there are any issues. Cheers, Andrei > > Esteban > > > Cheers, > Alex > > On 17 August 2017 at 00:56, Esteban A. Maringolo <emaringolo(a)gmail.com> > wrote: > >> Hi all, >> >> Is there a way to enable the auto-update of instance variables display in >> the GTInspector? >> >> There are cases where the instance is nil, I then initialize it somehow, >> but the variable is still displayed as nil. >> >> I know there is an "Update" button, which BTW should be labeled "refresh" >> instead, to do it manually, but hey, this is Smalltalk, we invented MVC :D >> >> We can consider the previous as a feature, but what I think it is a bug >> is that if the variable is nil, and later it is initialized, nil is still >> displayed, but when clicked the nodes below it shows the variables of the >> new object in the instance variable. >> >> E.g. >> <image.png> >> >> Is this a bug or a feature? >> >> Regards! >> >> Esteban A. Maringolo >> > > >

Aug. 18, 2017