August 2017 - Pharo-users - lists.pharo.org

Re: [Pharo-users] The Spec UI Framework. first translation to korean finish.

by peter yoo

1. compile error report ok i found error cause. look this. ================================ onion@coreonion:/mnt/USERDISK/onion/99_SpecUIíê¸/BuildingUIWithSpec$ make book git submodule update --init mkdir -p ./book-result find . -type d -path ./book-result/ -prune -o -wholename "*/figures" -exec rsync -rR {} ./book-result \; find: warning: -path ./book-result/ will not match anything because it ends with /. cp -R support ./book-result cp .latexmkrc ./book-result ./pillar export --to="latex:sbabook" --outputFile=SpecBooklet SpecBooklet.pillar CCConfigurationError: /mnt/USERDISK/onion/99_SpecUIÃâ¢ÅÃªÂ¸â¬/BuildingUIWithSpec is not a valid directory. PRPillarConfiguration(CCConfiguration)>>error: PRPillarConfiguration(CCConfiguration)>>toDirectory: PRPillarConfiguration(CCConfiguration)>>baseDirectory: ================================ Spec git file location have "korean charactor" then book compile fail. only use location then can compile. and no problem. 2. TeX base ok.. can look this. https://github.com/cdlm/sbabook i know polygrossia. but not use before. i can try some TeX then report later. thanks for community. :D

Aug. 31, 2017

Re: [Pharo-users] [Pillar] Pillar source code of ESUG 2015 presentation? Presentations done with Pillar?

by H. Hirzel

A useful file which shows what is possible to do slides https://github.com/SquareBracketAssociates/PharoMooc/blob/master/Slides/1-T… But nothing about the first slide. Another question: ${ ... something }$ is used to tell Pillar that a new slide is defined and the title is set ${slide:title=Getting a Feel About Syntax}$ What are options to use within ${ ... something }$ ? The pillar tutorial in the Enterprise book [1] does not mention this. --Hannes [1] https://ci.inria.fr/pharo-contribution/job/EnterprisePharoBook/lastSuccessf… On 8/31/17, Cyril Ferlicot <cyril.ferlicot(a)gmail.com> wrote: > Hi, > > I did not check but the first slide is probably written in beamer > direcly. It must be in the template of the slides. > > On Thu, Aug 31, 2017 at 2:53 PM, H. Hirzel <hannes.hirzel(a)gmail.com> wrote: >> Thank yous. >> >> I wonder how the image (or two images?) in the title slide were added. >> >> Example: >> PDF >> >> http://rmod-pharo-mooc.lille.inria.fr/MOOC/Slides/Week1/C019-W1S05-PharoSyn… >> Pillar source: >> https://github.com/SquareBracketAssociates/PharoMooc/blob/master/Slides/Wee… >> >> The code of the first slide contains the meta information, i.e. there >> must be a title template somewhere. Is the template defined within the >> image or is it a separate file outside in the working directory? I did >> not find it yet. >> >> >> Below in { .. } is the definition of the title slide. >> Then >> ${slide:title=Getting a Feel About Syntax}$ >> starts a regular slide. >> >> >> >> { >> "title":"Pharo Syntax in a Nutshell", >> "slidesid":"W1S05" >> } >> >> >> ${slide:title=Getting a Feel About Syntax}$ >> >> Give you the general feel to get started: >> - Overview of syntactical elements and constructs >> - Three kinds of messages to minimize parentheses >> - Overview of block syntax >> This lecture is an ""overview"" >> No stress if you do not get it right now! >> We will repeat in future lectures >> ${slide:title=The Complete Syntax on a Postcard}$ >> No need to understand everything! >> But "everything" is on this screen :) >> >> >> --Hannes >> >> > > > > -- > Cyril Ferlicot > https://ferlicot.fr > > http://www.synectique.eu > 2 rue Jacques PrÃ©vert 01, > 59650 Villeneuve d'ascq France > >

Aug. 31, 2017

Re: [Pharo-users] [Pillar] Pillar source code of ESUG 2015 presentation? Presentations done with Pillar?

by Cyril Ferlicot

Hi, I did not check but the first slide is probably written in beamer direcly. It must be in the template of the slides. On Thu, Aug 31, 2017 at 2:53 PM, H. Hirzel <hannes.hirzel(a)gmail.com> wrote: > Thank yous. > > I wonder how the image (or two images?) in the title slide were added. > > Example: > PDF > http://rmod-pharo-mooc.lille.inria.fr/MOOC/Slides/Week1/C019-W1S05-PharoSyn… > Pillar source: https://github.com/SquareBracketAssociates/PharoMooc/blob/master/Slides/Wee… > > The code of the first slide contains the meta information, i.e. there > must be a title template somewhere. Is the template defined within the > image or is it a separate file outside in the working directory? I did > not find it yet. > > > Below in { .. } is the definition of the title slide. > Then > ${slide:title=Getting a Feel About Syntax}$ > starts a regular slide. > > > > { > "title":"Pharo Syntax in a Nutshell", > "slidesid":"W1S05" > } > > > ${slide:title=Getting a Feel About Syntax}$ > > Give you the general feel to get started: > - Overview of syntactical elements and constructs > - Three kinds of messages to minimize parentheses > - Overview of block syntax > This lecture is an ""overview"" > No stress if you do not get it right now! > We will repeat in future lectures > ${slide:title=The Complete Syntax on a Postcard}$ > No need to understand everything! > But "everything" is on this screen :) > > > --Hannes > > -- Cyril Ferlicot https://ferlicot.fr http://www.synectique.eu 2 rue Jacques PrÃ©vert 01, 59650 Villeneuve d'ascq France

Aug. 31, 2017

Re: [Pharo-users] [Pillar] Pillar source code of ESUG 2015 presentation? Presentations done with Pillar?

by H. Hirzel

Thank yous. I wonder how the image (or two images?) in the title slide were added. Example: PDF http://rmod-pharo-mooc.lille.inria.fr/MOOC/Slides/Week1/C019-W1S05-PharoSyn… Pillar source: https://github.com/SquareBracketAssociates/PharoMooc/blob/master/Slides/Wee… The code of the first slide contains the meta information, i.e. there must be a title template somewhere. Is the template defined within the image or is it a separate file outside in the working directory? I did not find it yet. Below in { .. } is the definition of the title slide. Then ${slide:title=Getting a Feel About Syntax}$ starts a regular slide. { "title":"Pharo Syntax in a Nutshell", "slidesid":"W1S05" } ${slide:title=Getting a Feel About Syntax}$ Give you the general feel to get started: - Overview of syntactical elements and constructs - Three kinds of messages to minimize parentheses - Overview of block syntax This lecture is an ""overview"" No stress if you do not get it right now! We will repeat in future lectures ${slide:title=The Complete Syntax on a Postcard}$ No need to understand everything! But "everything" is on this screen :) --Hannes On 8/29/17, Stephane Ducasse <stepharo.self(a)gmail.com> wrote: > except the slides 2 and 3 of the first week :) > But else all the mooc: slides, exercises were made in Pillar > > On Tue, Aug 29, 2017 at 3:39 PM, Peter UhnÃ¡k <i.uhnak(a)gmail.com> wrote: >> All Pharo Mooc slides were made in pillar >> >> e.g. >> >> pillar: >> https://github.com/SquareBracketAssociates/PharoMooc/blob/master/Slides/Wee… >> >> output: >> http://rmod-pharo-mooc.lille.inria.fr/MOOC/Slides/Week3/C019-W3S03-Basic-Va… >> >> ( mooc.pharo.org ) >> >> Peter >> >> On Tue, Aug 29, 2017 at 2:54 PM, H. Hirzel <hannes.hirzel(a)gmail.com> >> wrote: >>> >>> Hello >>> >>> On the slide 14 of the Pillar presentation at ESUG 2015 [1] it says >>> that the presentation was made with Pillar. Is the Pillar source code >>> available somewhere? >>> >>> Other source code examples of presentations made with Pillar are fine as >>> well. >>> >>> Thank you >>> >>> Hannes Hirzel >>> >>> >>> [1] >>> http://esug.org/data/ESUG2015/4%20thursday/1600-1630%20Pilar/Pillar.pdf >>> >> > >

Aug. 31, 2017

Re: [Pharo-users] [Pillar] How do I open the Pillar editor in Pharo 6?

by H. Hirzel

On 8/30/17, Offray Vladimir Luna CÃ¡rdenas <offray.luna(a)mutabit.com> wrote: > Works pretty well! See the screen below. Confirmation that it works well. First it did not but in a pristine image done with curl get.pharo.org | bash (Ubuntu 14.04) then in a Pharo playground Metacello new smalltalkhubUser: 'Pier' project: 'Pillar'; configuration: 'Pillar'; version: #stable; load. The Pillar editor works fine, see screen shot. Many thanks to Doru for the info about the Pillar installation invocation! (Not sure about the status of the Pillar Pharo 6 catalog entry, two weeks ago the Pillar editor did not work). --Hannes

Aug. 31, 2017

Re: [Pharo-users] Engineering notation

by Dimitris Chloupis

Nope I did not know that. I don't see my self using it any time soon because I like my code as English like as possible but It definitely can be useful in some cases. On Wed, Aug 30, 2017 at 11:49 PM Andreas Sunardi <a.sunardi(a)gmail.com> wrote: > I probably telling what has been known for ages, but some months ago I was > pleasantly surprise to find a space is not needed between the receiver and > the message when the receiver is a number. Because of that I'm able to > define, for example #u, #n and #k for micron, nano and kilo units, and use > them as in 1u, 1n and 1k. > > I don't know if this is intended or not, but I'm using it to my benefit. I > want to share this in case some body finds this and thinks it should be > fixed. I'm pleading to leave it as is. > > -- > Andreas Sunardi >

Aug. 31, 2017

Re: [Pharo-users] Engineering notation

by Peter UhnÃ¡k

Keep in mind that autoformatting will add the space. On Thu, Aug 31, 2017 at 8:54 AM, Marcus Denker <marcus.denker(a)inria.fr> wrote: > yes, some people use > > 1halt. > +1halt. ;)

Aug. 31, 2017

Re: [Pharo-users] Engineering notation

by Marcus Denker

yes, some people use 1halt. instead of self halt as it is less characters to typeâ¦ Marcus > On 30 Aug 2017, at 22:48, Andreas Sunardi <a.sunardi(a)gmail.com> wrote: > > I probably telling what has been known for ages, but some months ago I was pleasantly surprise to find a space is not needed between the receiver and the message when the receiver is a number. Because of that I'm able to define, for example #u, #n and #k for micron, nano and kilo units, and use them as in 1u, 1n and 1k. > > I don't know if this is intended or not, but I'm using it to my benefit. I want to share this in case some body finds this and thinks it should be fixed. I'm pleading to leave it as is. > > -- > Andreas Sunardi

Aug. 31, 2017

Using different C libraries

by Andreas Sunardi

In Pharo 6's bin/pharo script, there is the following comment: # On some linuxes there multiple versions of the C library. If the image uses # libc (e.g. through the FFI) then it must use the same version that the VM uses # and so it should take precedence over /lib libc. This is done by setting # LD_LIBRARY_PATH appropriately, based on ldd's idea of the libc use by the VM My background story is I want to run Pharo 6, needing glibc > 2.15, in CentOS 6 that has glibc 2.12. I've built and installed 2.17 locally. (in another email thread Esteban has provided a better solution, which I haven't tried). I'm not sure if the comment is only referring to 32-bit and 64-bit versions or different glibc versions. Is it intended for user to be able to use different C library versions, as in glibc 2.15 vs 2.17 vs. 2.19? If it is, I claim it does not work and I'm curious if there is desire to support it. (It isn't an issue anymore for me and I can share my story how I got it to work. It isn't a clean way by any means, but hopefully it provides enough information) -- Andreas

Aug. 30, 2017

Pharo 6 FileSystem>>changeDirectory: is missing

by Andreas Sunardi

I found FileSystem class has changed from Pharo 5 to Pharo 6. I've been using FileSystem>>changeDirectory to make my program (Pharo 5) runs in the current working directory (thus able to find local files). This is now broken because #changeDirectory doesn't exist anymore. The change seems intentional. Question: Is there a different way in Pharo 6 do set working directory or is this a bug? -- Andreas

Aug. 30, 2017