July 2017 - Pharo-users - lists.pharo.org

Re: [Pharo-users] 2 questions around gitlab, gitfiletree, BaselineOf

by Thierry Goubier

Hi Sabine, as far as I remember when I implemented it, the use of a config file shouldn't be an issue, because GitFileTree rewrites exactly the git@SPF_GITLAB the way you would expect, as long as it manages to identify correctly the parts in the URL (and to identify those parts, it relies on Zinc). Now, have you tried with: gitfiletree://SPF_GITLAB/SPF/Spesenfuchs ? Zinc correctly identifies SPF_GITLAB as the host, but it writes it non-capitalized (spf_gitlab), which may makes it miss your .ssh/config entry. In that case, could you add the spf_gitlab entry as well in your config file ? Thierry Le 07/07/2017 Ã 21:32, Sabine Manaa a Ã©crit : > Hi Thierry, Gabriel and Peter, > > thank you very much. First I had a look at this because it would be nice > to load directly from Gitlab (with then generating a local repository > automatically): > > spec repository: > 'gitfiletree://gitlab.intra.example.com/ANiceLib:master/ > <http://example.com/ANiceLib:master/>placeWhereAreThePackages'; > > I did not manage to use it because I would need to give a port as > parameter (we do not use port 22). I chatted in discord with Peter Uhnak. > > It seemed that this is not yet possible because of my case that i do not > use port 22 and I use a config file. > > On the command line, this command succeeds with cloning my repository > from gitlab: > > git clone git@SPF_GITLAB:SPF/Spesenfuchs.git > > > There is a config file which defines my host: > > host SPF_GITLAB > HostName 192.168.1.61 > Port 30001 > > I try to write my baseline with this > > spec repository: 'gitfiletree://SPF_GITLAB:SPF/Spesenfuchs.git'. > > > This did not work in the beginning. > > I played around and found out that there are 2 points where I had to > change the system to make this work: > > 1) ZnUrl>>parseHostPort: > stream atEnd > ifFalse: ["portNumber := Integer readFrom: stream ifFail: [ > ZnPortNotANumber signal ]. > (portNumber between: 1 and: 65535) ifFalse: [ DomainError signalFrom: 1 > to: 65535 ]." > self port: 30001 "portNumber" ] ] > ->> here, it is assumed that there is always a port integer after the : > If i set it hard to my port I skip this problem > > 2) MCFileTreeGitRepository>>basicFromUrl: aZnUrl > here I changed the code also hard from > > repo remoteUrl: 'git@' , aZnUrl host , ':' , path > to > repo remoteUrl: 'git@SPF_GITLAB:SPF/Spesenfuchs.git' > > ->> here, aUZnUrl host is in lowercase but my name is in uppercase > :SPF is missing > > the existing code would make this: > git@spf_gitlab:Spesenfuchs.git > instead of > git@SPF_GITLAB:SPF/Spesenfuchs.git > > With this 2 changes, my code could load. > > So my question: Are this 2 points issues to fix or should I create my > own workaround (create my own loader, not making THIS changes )? > > Regards > Sabine > > > > > > 2017-07-07 16:06 GMT+02:00 gcotelli [via Smalltalk] <[hidden email] > </user/SendEmail.jtp?type=node&node=4953938&i=0>>: > > Hi Sabine, > for your own baseline you don't need to specify a repository. Just > load it with something like: > > Metacello new > baseline: 'RLA24'; > repository: 'filetree://disklocation/repository'; > load: 'Group To Load' > > Also you can have local copies of your dependencies in case you > don't want to use an internet connection for dowloading, just use > the lock command of Metacello to "overwrite" the repository > definitions. For example take a look at: > > https://gist.github.com/gcotelli/d4521656358786ae2aca12a70478980f > <https://gist.github.com/gcotelli/d4521656358786ae2aca12a70478980f> > > Regards, > Gabriel > > > On Fri, Jul 7, 2017 at 10:48 AM, Sabine Manaa <[hidden email] > <http:///user/SendEmail.jtp?type=node&node=4953880&i=0>> wrote: > > Hi, > > we have our own gitlab running now and I succeeded to move our > code from > sthub to it. > I can push my new code into it from Pharo. All fine. > I also created a Baseline (based on my former configurationOf). > Loading the code from others (e.g. seaside) with this baseline > is also fine. > > There are 2 Points where I am sure it could be better (it is worse) > 1) For loading my own code, I currently have a bad solution > It is in the postLoadBaseline and does this: > > | gitRepository | > gitRepository := MCFileTreeRepository new > directory: > '/Applications/Pharo5.0-7.app/Contents/Resources/spf-gitlab/repository' > asFileReference. > {'RKA24-Model' . 'RKA24-System' . 'RKA24-Translator' . > 'RKA24-View' . > 'RKA24-Test' . 'RKA24-Report' . 'RKA24-Overwrites'} > do: [ :each | > Gofer it > repository: gitRepository; > package: each; > load ]. > > I would like to load it within my baseline like this below but I > dont know > what to write in the fileTreeRepository method... > > baseline: spec > <baseline> > spec > for: #common > do: [ spec blessing: #baseline. > spec repository: ##self > fileTreeRepository##. > "here I load all the the oher stuff" > spec > package: 'RKA24-Model'; > package: 'RKA24-System'; > package: 'RKA24-Translator'; > package: 'RKA24-View'; > package: 'RKA24-Test'; > package: 'RKA24-Report'; > package: 'RKA24-Overwrites' ] > > 2) Also, when I take a new Image, I have to do several steps > > load gitfiletree from catalog > add/open my gitfiletree repository from Monticello > load BaselineOfRKA24 manually with > (BaselineOfRKA24 project map at: 'baseline') load > > I think this is not the best way, I would like to make it right. > > Can anyone give me some hints how to improve this two steps? > I use Pharo 5 and I don't want to go to Pharo 6 right now. > I develop on mac and production server is on windows. > > Regards > Sabine > > > > > > -- > View this message in context: > http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp49… > <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp49…> > Sent from the Pharo Smalltalk Users mailing list archive at > Nabble.com. > > > > > ------------------------------------------------------------------------ > If you reply to this email, your message will be added to the > discussion below: > http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp49… > <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp49…> > > To start a new topic under Pharo Smalltalk Users, email [hidden > email] </user/SendEmail.jtp?type=node&node=4953938&i=1> > To unsubscribe from Pharo Smalltalk Users, click here. > NAML > <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instan…> > > > > > ------------------------------------------------------------------------ > View this message in context: Re: 2 questions around gitlab, > gitfiletree, BaselineOf > <http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp49…> > Sent from the Pharo Smalltalk Users mailing list archive > <http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html> at Nabble.com.

July 7, 2017

Re: [Pharo-users] installing iceberg

by Tim Mackinnon

There are known problems with iceberg in 64bit pharo6. If you don't yet need 64bit (and you probably don't) - I would say stick to 32bit and get more familiar with things. Soon there will be Pharo 6.1 and then you can upgrade if you need it. Tim Sent from my iPhone > On 7 Jul 2017, at 02:06, sergio ruiz <sergio.rrd(a)gmail.com> wrote: > > I am running pharo 6. > > i am running the 64bit version.. should i be running the 32bit version? > > when i try to run iceberg, I get an error.. but it is installed when i download.. > >> On July 6, 2017 at 5:32:09 PM, Tim Mackinnon (tim(a)testit.works) wrote: >> >> there were some instructions in an email from Esteban - but you only need to do that if you want to run 64bit - otherwise you can stick with the stock Pharo 6 one? > ---- > peace, > sergio > photographer, journalist, visionary > > Public Key: http://bit.ly/29z9fG0 > #BitMessage BM-NBaswViL21xqgg9STRJjaJaUoyiNe2dV > http://www.Village-Buzz.com > http://www.ThoseOptimizeGuys.com > http://www.coffee-black.com > http://www.painlessfrugality.com > http://www.twitter.com/sergio_101 > http://www.facebook.com/sergio101

July 7, 2017

Re: [Pharo-users] Pharo starts completely minimized

by Andreas Sunardi

Where did I see this pharo-ui? I thought I saw it before. I never used it, I always use 'pharo' script/executable, but now I can't find it. I checked windows(P5/P6). linux(P5/P6), mac(P6) and I don't find this pharo-ui. There's -iconic (Pharo 5) and --iconic (Pharo 6) options. $ pharo --help | grep iconic --iconic start up iconified I wonder if that is set in pharo-ui. But again, I can't find pharo-ui file. On Thu, Jul 6, 2017 at 7:24 PM, sergio ruiz <sergio.rrd(a)gmail.com> wrote: > For some reason, every time i start pharo. like: ./pharo-ui Pharo.image > > it starts as a tiny box.. a completely minimized window.. > > any ideas? > > should i be starting it differently? > > Thanks! > > > > ---- > peace, > sergio > photographer, journalist, visionary > > Public Key: http://bit.ly/29z9fG0 > #BitMessage BM-NBaswViL21xqgg9STRJjaJaUoyiNe2dV > http://www.Village-Buzz.com <http://www.village-buzz.com/> > http://www.ThoseOptimizeGuys.com <http://www.thoseoptimizeguys.com/> > http://www.coffee-black.com > http://www.painlessfrugality.com > http://www.twitter.com/sergio_101 > http://www.facebook.com/sergio101 >

July 7, 2017

Re: [Pharo-users] 2 questions around gitlab, gitfiletree, BaselineOf

by Sabine Manaa

Hi Thierry, Gabriel and Peter, thank you very much. First I had a look at this because it would be nice to load directly from Gitlab (with then generating a local repository automatically): spec repository: 'gitfiletree://gitlab.intra.example.com/ANiceLib:master/ placeWhereAreThePackages'; I did not manage to use it because I would need to give a port as parameter (we do not use port 22). I chatted in discord with Peter Uhnak. It seemed that this is not yet possible because of my case that i do not use port 22 and I use a config file. On the command line, this command succeeds with cloning my repository from gitlab: git clone git@SPF_GITLAB:SPF/Spesenfuchs.git There is a config file which defines my host: host SPF_GITLAB HostName 192.168.1.61 Port 30001 I try to write my baseline with this spec repository: 'gitfiletree://SPF_GITLAB:SPF/Spesenfuchs.git'. This did not work in the beginning. I played around and found out that there are 2 points where I had to change the system to make this work: 1) ZnUrl>>parseHostPort: stream atEnd ifFalse: ["portNumber := Integer readFrom: stream ifFail: [ ZnPortNotANumber signal ]. (portNumber between: 1 and: 65535) ifFalse: [ DomainError signalFrom: 1 to: 65535 ]." self port: 30001 "portNumber" ] ] ->> here, it is assumed that there is always a port integer after the : If i set it hard to my port I skip this problem 2) MCFileTreeGitRepository>>basicFromUrl: aZnUrl here I changed the code also hard from repo remoteUrl: 'git@' , aZnUrl host , ':' , path to repo remoteUrl: 'git@SPF_GITLAB:SPF/Spesenfuchs.git' ->> here, aUZnUrl host is in lowercase but my name is in uppercase :SPF is missing the existing code would make this: git@spf_gitlab:Spesenfuchs.git instead of git@SPF_GITLAB:SPF/Spesenfuchs.git With this 2 changes, my code could load. So my question: Are this 2 points issues to fix or should I create my own workaround (create my own loader, not making THIS changes )? Regards Sabine 2017-07-07 16:06 GMT+02:00 gcotelli [via Smalltalk] < ml+s1294792n4953880h75(a)n4.nabble.com>: > Hi Sabine, > for your own baseline you don't need to specify a repository. Just load it > with something like: > > Metacello new > baseline: 'RLA24'; > repository: 'filetree://disklocation/repository'; > load: 'Group To Load' > > Also you can have local copies of your dependencies in case you don't want > to use an internet connection for dowloading, just use the lock command of > Metacello to "overwrite" the repository definitions. For example take a > look at: > > https://gist.github.com/gcotelli/d4521656358786ae2aca12a70478980f > > Regards, > Gabriel > > > On Fri, Jul 7, 2017 at 10:48 AM, Sabine Manaa <[hidden email] > <http:///user/SendEmail.jtp?type=node&node=4953880&i=0>> wrote: > >> Hi, >> >> we have our own gitlab running now and I succeeded to move our code from >> sthub to it. >> I can push my new code into it from Pharo. All fine. >> I also created a Baseline (based on my former configurationOf). >> Loading the code from others (e.g. seaside) with this baseline is also >> fine. >> >> There are 2 Points where I am sure it could be better (it is worse) >> 1) For loading my own code, I currently have a bad solution >> It is in the postLoadBaseline and does this: >> >> | gitRepository | >> gitRepository := MCFileTreeRepository new >> directory: >> '/Applications/Pharo5.0-7.app/Contents/Resources/spf-gitlab/repository' >> asFileReference. >> {'RKA24-Model' . 'RKA24-System' . 'RKA24-Translator' . >> 'RKA24-View' . >> 'RKA24-Test' . 'RKA24-Report' . 'RKA24-Overwrites'} >> do: [ :each | >> Gofer it >> repository: gitRepository; >> package: each; >> load ]. >> >> I would like to load it within my baseline like this below but I dont know >> what to write in the fileTreeRepository method... >> >> baseline: spec >> <baseline> >> spec >> for: #common >> do: [ spec blessing: #baseline. >> spec repository: ##self fileTreeRepository##. >> "here I load all the the oher stuff" >> spec >> package: 'RKA24-Model'; >> package: 'RKA24-System'; >> package: 'RKA24-Translator'; >> package: 'RKA24-View'; >> package: 'RKA24-Test'; >> package: 'RKA24-Report'; >> package: 'RKA24-Overwrites' ] >> >> 2) Also, when I take a new Image, I have to do several steps >> >> load gitfiletree from catalog >> add/open my gitfiletree repository from Monticello >> load BaselineOfRKA24 manually with >> (BaselineOfRKA24 project map at: 'baseline') load >> >> I think this is not the best way, I would like to make it right. >> >> Can anyone give me some hints how to improve this two steps? >> I use Pharo 5 and I don't want to go to Pharo 6 right now. >> I develop on mac and production server is on windows. >> >> Regards >> Sabine >> >> >> >> >> >> -- >> View this message in context: http://forum.world.st/2-questi >> ons-around-gitlab-gitfiletree-BaselineOf-tp4953877.html >> Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. >> >> > > > ------------------------------ > If you reply to this email, your message will be added to the discussion > below: > http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf- > tp4953877p4953880.html > To start a new topic under Pharo Smalltalk Users, email > ml+s1294792n1310670h65(a)n4.nabble.com > To unsubscribe from Pharo Smalltalk Users, click here > <http://forum.world.st/template/NamlServlet.jtp?macro=unsubscribe_by_code&no…> > . > NAML > <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instan…> > -- View this message in context: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp49… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

July 7, 2017

Re: [Pharo-users] Cannot keep image running.

by sergio ruiz

Hey, Denis.. Thanks SO MUCH for all of your help over the past few days.. I think I have my PharmIDE all set up correctly now, and itâs doing just fine.. Thank you for all your work on this project.. i will evangelize for sure! On July 7, 2017 at 11:07:34 AM, Denis Kudriashov (dionisiydk(a)gmail.com) wrote: How you saved image?Â Doing it from remote playground will lead to such problem because evaluation expects result from server. And after restart server will try return it again.Â To correctly save image evaluate "remotePharo saveImage"Â from local playground. It take care about such cases (it request server without waiting result). ---- peace, sergio photographer, journalist, visionary Public Key:Â http://bit.ly/29z9fG0 #BitMessageÂ BM-NBaswViL21xqgg9STRJjaJaUoyiNe2dV http://www.Village-Buzz.com http://www.ThoseOptimizeGuys.com http://www.coffee-black.com http://www.painlessfrugality.com http://www.twitter.com/sergio_101 http://www.facebook.com/sergio101

July 7, 2017

Re: [Pharo-users] 2 questions around gitlab, gitfiletree, BaselineOf

by Peter Uhnak

Hi, I had similar issues when using gitfiletree... and in the end I've ended up with this https://github.com/peteruhnak/pharo-scripts/blob/master/config/5.0/openponk… it is not the prettiest thing, however it is automated so I didn't bother improving it. * automatically loads GitFileTree (I also load my own shell, because OSProcess was failing on me hard) * "pre-loads" some dependencies so they point to my local git repositories instead of being pulled from github * if BaselineOf is available in the image, then MC loader will use that (instead of grabbing code from bitbucket/gitlab/github) * #onWarningLog is there to suppress warning about loading from different source (local instead of github), but avialble in transcript iirc * startup script, so I could name the image certain way and it will prepare it for me * (obviously one can use it separately) * used on windows and linux (that's why the platform checking) Peter On Fri, Jul 07, 2017 at 06:48:50AM -0700, Sabine Manaa wrote: > Hi, > > we have our own gitlab running now and I succeeded to move our code from > sthub to it. > I can push my new code into it from Pharo. All fine. > I also created a Baseline (based on my former configurationOf). > Loading the code from others (e.g. seaside) with this baseline is also fine. > > There are 2 Points where I am sure it could be better (it is worse) > 1) For loading my own code, I currently have a bad solution > It is in the postLoadBaseline and does this: > > | gitRepository | > gitRepository := MCFileTreeRepository new > directory: > '/Applications/Pharo5.0-7.app/Contents/Resources/spf-gitlab/repository' > asFileReference. > {'RKA24-Model' . 'RKA24-System' . 'RKA24-Translator' . 'RKA24-View' . > 'RKA24-Test' . 'RKA24-Report' . 'RKA24-Overwrites'} > do: [ :each | > Gofer it > repository: gitRepository; > package: each; > load ]. > > I would like to load it within my baseline like this below but I dont know > what to write in the fileTreeRepository method... > > baseline: spec > <baseline> > spec > for: #common > do: [ spec blessing: #baseline. > spec repository: ##self fileTreeRepository##. > "here I load all the the oher stuff" > spec > package: 'RKA24-Model'; > package: 'RKA24-System'; > package: 'RKA24-Translator'; > package: 'RKA24-View'; > package: 'RKA24-Test'; > package: 'RKA24-Report'; > package: 'RKA24-Overwrites' ] > > 2) Also, when I take a new Image, I have to do several steps > > load gitfiletree from catalog > add/open my gitfiletree repository from Monticello > load BaselineOfRKA24 manually with > (BaselineOfRKA24 project map at: 'baseline') load > > I think this is not the best way, I would like to make it right. > > Can anyone give me some hints how to improve this two steps? > I use Pharo 5 and I don't want to go to Pharo 6 right now. > I develop on mac and production server is on windows. > > Regards > Sabine > > > > > > -- > View this message in context: http://forum.world.st/2-questions-around-gitlab-gitfiletree-BaselineOf-tp49… > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. >

July 7, 2017

Re: [Pharo-users] How to view hierarchy of multiple classes in a package?

by Denis Kudriashov

2017-07-07 17:52 GMT+02:00 Denis Kudriashov <dionisiydk(a)gmail.com>: > Hi Tim. > Just remembered this thread. > > In latest Calypso you are able select multiple classes and switch to > hierarchy. It will show "composite" hierarchy of all classes instead of > single one. > So if you select all classes (cmd+a) you will get desired behaviour, > Look: â

July 7, 2017

Re: [Pharo-users] How to view hierarchy of multiple classes in a package?

by Denis Kudriashov

Hi Tim. Just remembered this thread. In latest Calypso you are able select multiple classes and switch to hierarchy. It will show "composite" hierarchy of all classes instead of single one. So if you select all classes (cmd+a) you will get desired behaviour, 2016-12-27 17:44 GMT+01:00 Tim Mackinnon <tim(a)testit.works>: > Hi guys - I'm trying to get back into pharo, and check out the advances in > v5. > > Anyway, if I look at a package in the system browser, it shows me classes > in that package (i think my terminology is right here?). > > What confuses me, is his I can see the hire hybrid the classes in relation > to each other? The hier button just shows the hierarchy of the selected > class and not in relation to the others? > > I'm sure at some point pharo and squeak let you see the related > hierarchies of all the classes in the package didn't it? > > This is really useful to help understand the relationship between classes > and pure risky identify useful refactorings. > > I can't see how to do this in pharo anymore? > > Is this functionality that has been lost (which seems a shame)? Or am I > missing another useful browsers? > > Tim > > Sent from my iPhone > >

July 7, 2017

Re: [Pharo-users] Cannot keep image running.

by sergio ruiz

Yes! i tried just sending over a regular save..Â let me rebuilt it, and send the correct gig over.. thanks! On July 7, 2017 at 11:07:34 AM, Denis Kudriashov (dionisiydk(a)gmail.com) wrote: How you saved image?Â Doing it from remote playground will lead to such problem because evaluation expects result from server. And after restart server will try return it again.Â ---- peace, sergio photographer, journalist, visionary Public Key:Â http://bit.ly/29z9fG0 #BitMessageÂ BM-NBaswViL21xqgg9STRJjaJaUoyiNe2dV http://www.Village-Buzz.com http://www.ThoseOptimizeGuys.com http://www.coffee-black.com http://www.painlessfrugality.com http://www.twitter.com/sergio_101 http://www.facebook.com/sergio101

July 7, 2017

Re: [Pharo-users] Cannot keep image running.

by Denis Kudriashov

2017-07-07 15:58 GMT+02:00 sergio ruiz <sergio.rrd(a)gmail.com>: > Correct.. Ok. So server image was saved with running server, right? And actually it was saved with connected client. Error shows that after image was saved communication with client was continued. But when server restarts client is not connected to it and server signal timeout because no connection is available. How you saved image? Doing it from remote playground will lead to such problem because evaluation expects result from server. And after restart server will try return it again. To correctly save image evaluate "remotePharo saveImage" from local playground. It take care about such cases (it request server without waiting result).

July 7, 2017