July 2017 - Pharo-users - lists.pharo.org

Re: [Pharo-users] Looking for small boards and tiny computers which can run Pharo

by Attila Magyar

The esp32 is not capable of running Pharo unfortunatelly. It's not Linux based, it has a realtime operating system called FreeRTOS and the amount of memory it has is also quite limited. It's more like a microcontroller than a single board computer. -- View this message in context: http://forum.world.st/Looking-for-small-boards-and-tiny-computers-which-can… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

July 25, 2017

Re: [Pharo-users] Looking for small boards and tiny computers which can run Pharo

by Tim Mackinnon

Wasnât there another board that Ben was talking about recently - http://blog.openinworld.com/2017/06/evening-with-pharo-esp32/ <http://blog.openinworld.com/2017/06/evening-with-pharo-esp32/> (esp32?) > On 25 Jul 2017, at 09:14, Denis Kudriashov <dionisiydk(a)gmail.com> wrote: > > Hi. > > Pharo works on Beaglebone. And I am pretty sure that it will work on other ARM/Linux based computers > > 2017-07-24 21:30 GMT+02:00 Steven Costiou <steven.costiou(a)kloum.io <mailto:steven.costiou@kloum.io>>: > Hi, > > i am looking for: > > - small hardware, boards/computers, "embeddable" devices, etc. that can run Pharo (except Raspberry pi that i already know) > > - robots, flying drones or things alike with an open linux which can possibly run Pharo > > Could somebody points me to documentation or web sites where such things can be found ? > > Thanks, > > Steven. > >

July 25, 2017

Reef examples?

by Martin Dias

Hello, I've downloaded Reef following esteban's website [1] and wonder if there are some examples of use to try it faster. For the moment I just did the tutorial in the website and it works fine. [1]: http://smallworks.eu/web/projects/reef Cheers, MartÃn

July 25, 2017

Re: [Pharo-users] Looking for small boards and tiny computers which can run Pharo

by Denis Kudriashov

Hi. Pharo works on Beaglebone. And I am pretty sure that it will work on other ARM/Linux based computers 2017-07-24 21:30 GMT+02:00 Steven Costiou <steven.costiou(a)kloum.io>: > Hi, > > i am looking for: > > - small hardware, boards/computers, "embeddable" devices, etc. that can > run Pharo (except Raspberry pi that i already know) > > - robots, flying drones or things alike with an open linux which can > possibly run Pharo > > Could somebody points me to documentation or web sites where such things > can be found ? > > Thanks, > > Steven. >

July 25, 2017

Re: [Pharo-users] Compiling documents with Pillar

by phil＠highoctane.be

https://github.com/cdlm/docker-texlive On Jul 23, 2017 8:38 PM, "Glenn Hoetker" <ghoetker(a)me.com> wrote: > Thanks goodness I'm not the only one who had trouble finding how to do > this. I also look forward to the answer. > > Glenn > > > > Sent from my iPad > > > On Jul 23, 2017, at 11:29 AM, Myroslava Romaniuk <romaniuk(a)ucu.edu.ua> > wrote: > > > > Hi, > > > > how do I compile a document using Pillar if I want to get a PDF? I tried > googling but didn't get anything helpful. Btw I'm using Windows. > > > > Thanks, > > Myroslava > > >

July 25, 2017

Pharo support

by John Pfersich

If you want to support the Pharo project financially, go to https://salt.bountysource.com/teams/pharo or http://association.pharo.org to donate. Sent from my iPad

July 25, 2017

Re: [Pharo-users] Cloning code from GitHub using Iceberg

by Thierry Goubier

Le 24/07/2017 Ã 21:55, HernÃ¡n Morales Durand a Ã©crit : > 2017-07-24 4:29 GMT-03:00 Alistair Grant <akgrant0710(a)gmail.com>: >> Hi Hernan, >> >> On Sun, Jul 23, 2017 at 06:22:52PM -0300, Hern??n Morales Durand wrote: >>> Hi guys, >>> >>> I am trying to import code - in Pharo 6 - from a GitHub repository: >>> https://github.com/jigyasa-grover/CORMAS-Pharo. The repository doesn't >>> include a Baseline, and so it is not loadable using a Metacello >>> expression right? >>> >>> I've tried to clone it with Iceberg with Remote URL: >>> https://github.com/jigyasa-grover/CORMAS-Pharo.git >>> >>> I ended with a "Repository CORMAS-Pharo is invalid" so I wonder what's >>> exactly is invalid? I can browse the history but I don't know if any >>> code from that repository was already loaded in my image. >>> >>> The URL should be specified as the ghost text suggest? Currently the >>> ghost text is: git@github.com:user/project.git >>> >>> Should I fill the "Code subdirectory" field? >> >> I just: >> >> 1. opened Icerberg >> 2. pressed "Clone repository" >> 3. Entered https://github.com/jigyasa-grover/CORMAS-Pharo.git as the URL >> 4. Left the subdirectory blank (opening the repository in a browser you >> can see that the packages are in the top level directory) >> 5. Clicked Create repository >> 6. Selected the repository, the packages tab and loaded the >> ConfigurationOfComas >> >> without any problem. >> >> Pharo 6.0 >> Latest update: #60501 >> > > Thank you! This worked also in 6.1. > >> Is there an easy way to tell which version of Iceberg I have loaded? >> I'm sure it is 0.5.x, but not what the x is. > > It would be nice to have something like > > (RPackage organizer packageNamed: 'Iceberg') version This information is available via Metacello, if it was properly loaded via a configuration. (MetacelloProjectRegistration registry registrationForExactClassNamed: ConfigurationOfIceberg ifAbsent: [ ]) ifNotNil: [:r | r printString] See MetacelloProjectRegistration>>#printOn: for the details of querying the spec of the project. Baselines have no version information; if there is (like in git-based scenario), it is in the repository url and one has to decrypt it. Thierry > Cheers, > > HernÃ¡n > >> >> Cheers, >> Alistair >> > >

July 24, 2017

Re: [Pharo-users] Cloning code from GitHub using Iceberg

by HernÃ¡n Morales Durand

2017-07-24 4:29 GMT-03:00 Alistair Grant <akgrant0710(a)gmail.com>: > Hi Hernan, > > On Sun, Jul 23, 2017 at 06:22:52PM -0300, Hern??n Morales Durand wrote: >> Hi guys, >> >> I am trying to import code - in Pharo 6 - from a GitHub repository: >> https://github.com/jigyasa-grover/CORMAS-Pharo. The repository doesn't >> include a Baseline, and so it is not loadable using a Metacello >> expression right? >> >> I've tried to clone it with Iceberg with Remote URL: >> https://github.com/jigyasa-grover/CORMAS-Pharo.git >> >> I ended with a "Repository CORMAS-Pharo is invalid" so I wonder what's >> exactly is invalid? I can browse the history but I don't know if any >> code from that repository was already loaded in my image. >> >> The URL should be specified as the ghost text suggest? Currently the >> ghost text is: git@github.com:user/project.git >> >> Should I fill the "Code subdirectory" field? > > I just: > > 1. opened Icerberg > 2. pressed "Clone repository" > 3. Entered https://github.com/jigyasa-grover/CORMAS-Pharo.git as the URL > 4. Left the subdirectory blank (opening the repository in a browser you > can see that the packages are in the top level directory) > 5. Clicked Create repository > 6. Selected the repository, the packages tab and loaded the > ConfigurationOfComas > > without any problem. > > Pharo 6.0 > Latest update: #60501 > Thank you! This worked also in 6.1. > Is there an easy way to tell which version of Iceberg I have loaded? > I'm sure it is 0.5.x, but not what the x is. It would be nice to have something like (RPackage organizer packageNamed: 'Iceberg') version Cheers, HernÃ¡n > > Cheers, > Alistair >

July 24, 2017

Looking for small boards and tiny computers which can run Pharo

by Steven Costiou

Hi, i am looking for: - small hardware, boards/computers, "embeddable" devices, etc. that can run Pharo (except Raspberry pi that i already know) - robots, flying drones or things alike with an open linux which can possibly run Pharo Could somebody points me to documentation or web sites where such things can be found ? Thanks, Steven.

July 24, 2017

Re: [Pharo-users] Cloning code from GitHub using Iceberg

by HernÃ¡n Morales Durand

Hello Jigyasa, For now I am reading the Cormas mailing-list and annotating requirements, issues, etc. Also I started to port the VW UI (the easy parts) to Pharo. I will post some questions on the mailing-list tomorrow. Thank you, HernÃ¡n 2017-07-24 13:30 GMT-03:00 Jigyasa Grover <grover.jigyasa1(a)gmail.com>: > Hello HernÃ¡n, I guess you were able to resolve the issue. Any queries ? > > Also, really glad you are playing with the CORMAS Pharo project Any vision > or specific task you are planning to work ? :) > > Thank You > > Best > Jigyasa Grover > > > > -- > View this message in context: http://forum.world.st/Cloning-code-from-GitHub-using-Iceberg-tp4956481p4956… > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. >

July 24, 2017