June 2017 - Pharo-users - lists.pharo.org

Re: [Pharo-users] How to use HTTPS (SSL) with Zinc

by Sven Van Caekenberghe

> On 24 Jun 2017, at 09:26, Attila Magyar <m.magyar3(a)gmail.com> wrote: > > Teapot uses ZnServer defaultServerClass by default, but you can configure > Teapot to use other kind of ZnServers like this. > > > > This is available only in the latest development version. That's very nice. Thanks for the reply, Attila. (In regular mail, I don't see you code snippet, I copy it here). secureServer := (ZnSecureServer on: 1443) certificate: '/path/to/keypair'; logToTranscript; yourself. teapot := Teapot configure: { #znServer -> secureServer }. teapot GET: '/test' -> 'secure'; start. > -- > View this message in context: http://forum.world.st/How-to-use-HTTPS-SSL-with-Zinc-tp4952461p4952501.html > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. >

June 24, 2017

Re: [Pharo-users] How to use HTTPS (SSL) with Zinc

by Attila Magyar

Sven Van Caekenberghe-2 wrote > (In regular mail, I don't see you code snippet, I copy it here). Hmm, maybe because of the raw text tags. Is this visible? Transcript show: 'Hello world'; cr. -- View this message in context: http://forum.world.st/How-to-use-HTTPS-SSL-with-Zinc-tp4952461p4952503.html Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

June 24, 2017

Re: [Pharo-users] Pharo6 bootstrap how to

by Pavel Krivanek

The question is what is your goal because the bootstrapped image will have in the end (almost) the same content as the default non-bootstrapped image. You probably want to change the content of the produced image wich requires to modify the related baselines and do not load them all. For Dr Geo you will probably want to start with the BaselineOfMorphic however you will probably need a lot of custom modifications. -- Pavel 2017-06-24 9:07 GMT+02:00 Hilaire <hilaire(a)drgeo.eu>: > Just to be sure, it is to build an image from a mini-image, right? So > to get a fairly small Dr. Geo image. > > Le 24/06/2017 Ã 09:00, Hilaire a Ã©crit : > > Thanks, > > > > Can you key in the exact sequence to clone the git repo, I am not used > > to GIT yet. > > > > Hilaire > > -- > Dr. Geo > http://drgeo.eu > > >

June 24, 2017

Re: [Pharo-users] Pharo6 bootstrap how to

by Pavel Krivanek

git clone git@github.com:pharo-project/pharo.git 2017-06-24 9:00 GMT+02:00 Hilaire <hilaire(a)drgeo.eu>: > Thanks, > > Can you key in the exact sequence to clone the git repo, I am not used > to GIT yet. > > Hilaire > > Le 23/06/2017 Ã 22:08, Pavel Krivanek a Ã©crit : > > clone the master branch of > > git@github.com:pharo-project/pharo.git and > > inside this clone do: > > > > -- > Dr. Geo > http://drgeo.eu > > >

June 24, 2017

Re: [Pharo-users] How to use HTTPS (SSL) with Zinc

by Attila Magyar

Teapot uses ZnServer defaultServerClass by default, but you can configure Teapot to use other kind of ZnServers like this. This is available only in the latest development version. -- View this message in context: http://forum.world.st/How-to-use-HTTPS-SSL-with-Zinc-tp4952461p4952501.html Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

June 24, 2017

Re: [Pharo-users] Pharo6 bootstrap how to

by Hilaire

Just to be sure, it is to build an image from a mini-image, right? So to get a fairly small Dr. Geo image. Le 24/06/2017 Ã 09:00, Hilaire a Ã©crit : > Thanks, > > Can you key in the exact sequence to clone the git repo, I am not used > to GIT yet. > > Hilaire -- Dr. Geo http://drgeo.eu

June 24, 2017

Re: [Pharo-users] Pharo6 bootstrap how to

by Hilaire

Thanks, Can you key in the exact sequence to clone the git repo, I am not used to GIT yet. Hilaire Le 23/06/2017 Ã 22:08, Pavel Krivanek a Ã©crit : > clone the master branch of > git@github.com:pharo-project/pharo.git and > inside this clone do: > -- Dr. Geo http://drgeo.eu

June 24, 2017

Re: [Pharo-users] [Glass] How do you develop for gemstone in open source tools (pharo)?

by Tudor Girba

Hi, gt4gemstone is indeed a new project. The initial target of gt4gemstone is actually to support scenario 3). In this situation, even if you develop in Pharo, once you deploy your application you still want to be able to inspect/debug GemStone. In this situation, you want to have the same experience as you do in Pharo, including the extensions to the tools. Indeed, the project also contains an initial code browser (including senders/implementors) and its first target to support quick code modifications. Of course, that browser can evolve and this can lead to a full fledged experience of completely developing remotely from Pharo to GemStone. Calypso is indeed a very interesting project, but at the moment it is Pharo specific. One thing Andrei did in gt4gemstone is serialize the Glamour presentations and browsers. This is quite powerful and fast and adds another argument to the idea that browsers should be built mostly declarative. One direction we brainstormed about with Denis is to learn from the experience of both gt4gemstone and Calypso and find a common ground. But, this is future work. Cheers, Doru > On Jun 23, 2017, at 1:03 PM, Mariano Martinez Peck <marianopeck(a)gmail.com> wrote: > > > > On Thu, Jun 22, 2017 at 6:16 PM, Petr Fischer via Glass <glass(a)lists.gemtalksystems.com> wrote: > Hello, I'm curious how _comfortably_ develop software for Gemstone, which is the preferred/best way (and future)? > > 1) tODE - OK, a decent amount of work was inserted to it to make it work somehow. Decent tools with git support, a lot of windows (autolayouting required), very basic inspector, based on obsolete Pharo3, no autocomplete, weird auto code formating etc. :( > Will the development continue (better inspectors, autocomplete, etc)? > > 2) gt4gemstone - new project based on GT tools, great playground/workspace/inspectors, running in latest Pharo, but again, just basic browser, no autocompletion, no syntax coloring (so far), but modern way > What is the plan? Write proper class browser and code editor again from scratch? > There is amazing new browser for Pharo, Calypso, which has remote browsing capabilities (but probably different remoting/proxy layer than gt tools) - is possible to utilize this project for remote Gemstone browsing in future? > > 3) develop in Pharo, then deploy to Gemstone > With some compatibility layers, there is possibility to develop application/business logic in Pharo (with bare collections, dicts, containers etc.) and then deploy code to Gemstone and test. Nice scenario, latest modern dev tools (browsers, inspectors, versioning) from Pharo, but on the dev side in Pharo, no transaction logic (test transaction logic with junit impossible/not available etc.), also not compatible class library - so also with drawbacks with different Smalltalk implementation chaos :( > I would very much like to get involved with Gemstone dev, but it scratches a bit now. > > > Hi Hi Petr, > > I personally do 3). I like developing on Pharo and keep doing that on each latest stable release. And yeah, you must have some compatibility layers, you must keep a ConfigurationOf working on both platforms, different class libraries (files, etc), etc. This takes time at the beginning, but then it gets easier and easier. I still use tODE for evaluating code (workspace), browsing GemStone specific code (browser), debug (stored continuations), and for developing the GemStone specific code. > > > 4) > > I think you made a good summary. In all those cases, you still consider GemStone like both things, the language interpreter PLUS the persistency. There is one last approach which uses GemStone mostly only for "persistence". In this scenario you would use GemStone similarly to what you do with a normal relational DB, that is, you open a connection, then do something. Dale went a bit further and developed a simple Voyage kind of API with this idea in mind. Anyway, below are some interesting links. > > > [0] https://github.com/GsDevKit/gsDevKitHome/blob/dev/docs/articles/gsDevKitSer… > [1] https://github.com/dalehenrich/Tugrik > > [2] https://github.com/dalehenrich/voyage > > [3] http://www.slideshare.net/esug/tugrik-a-new-persistence-option-for-pharo > > > > Thanks! pf > _______________________________________________ > Glass mailing list > Glass(a)lists.gemtalksystems.com > http://lists.gemtalksystems.com/mailman/listinfo/glass > > > > -- > Mariano > http://marianopeck.wordpress.com -- www.tudorgirba.com www.feenk.com "There are no old things, there are only old ways of looking at them."

June 24, 2017

Re: [Pharo-users] How to use HTTPS (SSL) with Zinc

by horrido

Okay, I think I understand. There are two server instances, one for http and one for https. How do I get Teapot to use the one for https??? horrido wrote > I discovered that I skipped an important step in creating the SSL cert. > HTTPS is now working. However, for some reason, it's not finding my Teapot > routes. The route that worked in http://localhost:1701/login, for example, > no longer works in https://localhost:1443/login. I'm investigating... -- View this message in context: http://forum.world.st/How-to-use-HTTPS-SSL-with-Zinc-tp4952461p4952493.html Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

June 24, 2017

Re: [Pharo-users] How to use HTTPS (SSL) with Zinc

by horrido

I discovered that I skipped an important step in creating the SSL cert. HTTPS is now working. However, for some reason, it's not finding my Teapot routes. The route that worked in http://localhost:1701/login, for example, no longer works in https://localhost:1443/login. I'm investigating... -- View this message in context: http://forum.world.st/How-to-use-HTTPS-SSL-with-Zinc-tp4952461p4952492.html Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

June 24, 2017