June 2016 - Pharo-users - lists.pharo.org

Re: [Pharo-users] OSProcess command with german umlaut does not work

by Sabine Manaa

Hi Sven, thank you very much for your explanation. I will read the pharo book chapter again tomorrow morning. Each time I have to do with encoding, I have to start again with reading....;-( I was not asking for the reason of encoding but because OSProcess command: needs a String and not a Byte Array. But yes, sure, first encode it and then convert it back to a string. Regards and a nice evening Sabine 2016-06-06 19:57 GMT+02:00 Sven Van Caekenberghe-2 [via Smalltalk] < ml-node+s1294792n4899446h21(a)n4.nabble.com>: > > > On 06 Jun 2016, at 17:22, Sabine Manaa <[hidden email] > <http:///user/SendEmail.jtp?type=node&node=4899446&i=0>> wrote: > > > > why ByteArray? > > http://www.unicode.org/faq/utf_bom.html > > A Unicode transformation format (UTF) is an algorithmic mapping from every > Unicode code point (except surrogate code points) to a unique byte > sequence. > > https://en.wikipedia.org/wiki/UTF-8 > > UTF-8 encodes each of the 1,112,064 valid code points in the Unicode code > space (1,114,112 code points minus 2,048 surrogate code points) using one > to four 8-bit bytes (a group of 8 bits is known as an octet in the Unicode > Standard). > > In Pharo > > > https://ci.inria.fr/pharo-contribution/job/EnterprisePharoBook/lastSuccessf… > > Of course, given a ByteArray, whose values are all between 0 and 255 by > definition, you can convert it to a ByteString. That String is not a > correct (Pharo) String anymore, it is like converting a PNG or JPEG to > String, you can do it, it is just wrong. > > When talking to the outside world, be it over a network connection, or via > primitive calls, anything but pure ASCII strings need an encoding. This has > to be agreed upon by both parties. If the receiving party wants UTF-8 > forced into a (kind of) String, that is (still) possible. > > Your initial solution seems to indicate that this is expected. This (ugly) > conversion should be done at an as low level as possible, IMHO. > > Sven > > > > > ------------------------------ > If you reply to this email, your message will be added to the discussion > below: > > http://forum.world.st/OSProcess-command-with-german-umlaut-does-not-work-tp… > To start a new topic under Pharo Smalltalk Users, email > ml-node+s1294792n1310670h65(a)n4.nabble.com > To unsubscribe from Pharo Smalltalk Users, click here > <http://forum.world.st/template/NamlServlet.jtp?macro=unsubscribe_by_code&no…> > . > NAML > <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instan…> > -- View this message in context: http://forum.world.st/OSProcess-command-with-german-umlaut-does-not-work-tp… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

June 6, 2016

Re: [Pharo-users] OSProcess command with german umlaut does not work

by Sabine Manaa

Sorry, I did a mistake. I reversed it by mistake. asString is needed. does work : OSProcess command: ('cp /Library/WebServer/Documents/reports/bÃ¤r.pdf /Library/WebServer/Documents/reports/test-a.pdf' utf8Encoded asString). does not work (Improper store into indexable object): OSProcess command: ('cp /Library/WebServer/Documents/reports/bÃ¤r.pdf /Library/WebServer/Documents/reports/test-a.pdf' utf8Encoded) I can try on windows tomorrow if you want. 2016-06-06 17:22 GMT+02:00 Sabine Manaa <manaa.sabine(a)gmail.com>: > Hi Sven, > > why ByteArray? > > does not work (Improper store into indexable object): > OSProcess command: ('cp /Library/WebServer/Documents/reports/bÃ¤r.pdf > /Library/WebServer/Documents/reports/test-a.pdf' utf8Encoded asString). > > works: > OSProcess command: ('cp /Library/WebServer/Documents/reports/bÃ¤r.pdf > /Library/WebServer/Documents/reports/test-a.pdf' utf8Encoded) > > Perhaps David can add this here: > > command: aCommandString > "Run a command in a shell process. Similar to the system(3) call in the > standard C library, > except that aCommandString runs asynchronously in a child process. The > command is > run by a ConnectedUnixProcess in order to facilitate command pipelines > within Squeak." > > "UnixProcess thisOSProcess command: 'ls -l /etc'" > > | proc | > pid isNil > ifTrue: > [self class noAccessorAvailable. ^nil] > ifFalse: > [proc := self > forkJob: ExternalUnixOSProcess defaultShellPath > arguments: (Array with: '-c' with: aCommandString utf8Encoded asString) > <<<=== > environment: nil > descriptors: nil. > proc ifNil: [self class noAccessorAvailable]. > ^ proc] > > > regards > Sabine > > >> >> > > 2016-06-06 8:41 GMT+02:00 Sabine Manaa <manaa.sabine(a)gmail.com>: > >> Hi Dave, >> >> I get the german Ã¤ with: >> >> (Character value: 228) asString >> >> Do you want me to go in it and suggest a solution or do you want to try >> to fix it and I test it? >> >> Thanks for helping! >> >> Regards Sabine >> >> 2016-06-05 23:08 GMT+02:00 David T. Lewis [via Smalltalk] <[hidden email] >> <http:///user/SendEmail.jtp?type=node&node=4899318&i=0>>: >> >>> >>> >>> ------------------------------ >>> If you reply to this email, your message will be added to the discussion >>> below: >>> >>> http://forum.world.st/OSProcess-command-with-german-umlaut-does-not-work-tp… >>> To start a new topic under Pharo Smalltalk Users, email [hidden email] >>> <http:///user/SendEmail.jtp?type=node&node=4899318&i=1> >>> To unsubscribe from Pharo Smalltalk Users, click here. >>> NAML >>> <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instan…> >>> >> >> >> ------------------------------ >> View this message in context: Re: OSProcess command with german umlaut >> does not work >> <http://forum.world.st/OSProcess-command-with-german-umlaut-does-not-work-tp…> >> Sent from the Pharo Smalltalk Users mailing list archive >> <http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html> at >> Nabble.com. >> > >

June 6, 2016

Re: [Pharo-users] OSProcess command with german umlaut does not work

by Mariano Martinez Peck

Hi Dave, Sabine, Norbert et all, Few weeks (months?) ago I was also reviewing this topic of encoding a OS(Sub)Process. After surfing a bit the web, I found out the most simple and accurate answer/solution was indeed to set the correct locale and/or text encoding in the computer in question. Anyway...more answers below. Now... what I don't understand from Sabine is.. she said this one works: OSProcess command: ('cp /Library/WebServer/Documents/reports/bÃ¤r.pdf /Library/WebServer/Documents/reports/test-a.pdf' utf8Encoded) *But then my question is...does that work only because she's computer locale is UTF8? Or Unix* automatically decodes it and knows it is utf8?* *If not...should I adapt the #utf8Encoded to the encoding defined by the terminal? mmm* In my OSX box I do have UTF8 set: â¯ locale [13:56:49] LANG="en_US.UTF-8" LC_COLLATE="en_US.UTF-8" LC_CTYPE="en_US.UTF-8" LC_MESSAGES="en_US.UTF-8" LC_MONETARY="en_US.UTF-8" LC_NUMERIC="en_US.UTF-8" LC_TIME="en_US.UTF-8" LC_ALL= On Mon, Jun 6, 2016 at 1:42 PM, David T. Lewis <lewis(a)mail.msen.com> wrote: > Norbert, > > You are probably right. I'm not sure the best way to handle it. > > Dave > > > Dave, > > > >> Am 06.06.2016 um 18:13 schrieb David T. Lewis <lewis(a)mail.msen.com>: > >> > >> Hi Sabine, > >> > >> That's great that #utf8Encoded is working, thanks for confirming. > >> > >> I'll look and see if I can add that to OSProcess (I'm traveling and > >> cannot > >> look at it right now). > >> > >> Mariano - this thread probably applies to OSSubProcess also. > >> > > that would just work if the system locale is utf8, right? Wouldn't it be > > better to making that a setting? > > > > Norbert > > > >> Dave > >> > >>> Hi Sven, > >>> > >>> why ByteArray? > >>> > >>> does not work (Improper store into indexable object): > >>> OSProcess command: ('cp > >>> /Library/WebServer/Documents/reports/bÃ¤r.pdf > >>> /Library/WebServer/Documents/reports/test-a.pdf' utf8Encoded asString). > >>> > >>> works: > >>> OSProcess command: ('cp > >>> /Library/WebServer/Documents/reports/bÃ¤r.pdf > >>> /Library/WebServer/Documents/reports/test-a.pdf' utf8Encoded) > >>> > >>> Perhaps David can add this here: > >>> > >>> command: aCommandString > >>> "Run a command in a shell process. Similar to the system(3) call in the > >>> standard C library, > >>> except that aCommandString runs asynchronously in a child process. The > >>> command is > >>> run by a ConnectedUnixProcess in order to facilitate command pipelines > >>> within Squeak." > >>> > >>> "UnixProcess thisOSProcess command: 'ls -l /etc'" > >>> > >>> | proc | > >>> pid isNil > >>> ifTrue: > >>> [self class noAccessorAvailable. ^nil] > >>> ifFalse: > >>> [proc := self > >>> forkJob: ExternalUnixOSProcess defaultShellPath > >>> arguments: (Array with: '-c' with: aCommandString utf8Encoded asString) > >>> <<<=== > >>> environment: nil > >>> descriptors: nil. > >>> proc ifNil: [self class noAccessorAvailable]. > >>> ^ proc] > >>> > >>> > >>> regards > >>> Sabine > >>> > >>> > >>>> > >>>> > >>> > >>> 2016-06-06 8:41 GMT+02:00 Sabine Manaa <manaa.sabine(a)gmail.com>: > >>> > >>>> Hi Dave, > >>>> > >>>> I get the german Ã¤ with: > >>>> > >>>> (Character value: 228) asString > >>>> > >>>> Do you want me to go in it and suggest a solution or do you want to > >>>> try > >>>> to > >>>> fix it and I test it? > >>>> > >>>> Thanks for helping! > >>>> > >>>> Regards Sabine > >>>> > >>>> 2016-06-05 23:08 GMT+02:00 David T. Lewis [via Smalltalk] <[hidden > >>>> email] > >>>> <http:///user/SendEmail.jtp?type=node&node=4899318&i=0>>: > >>>> > >>>>> > >>>>> > >>>>> ------------------------------ > >>>>> If you reply to this email, your message will be added to the > >>>>> discussion > >>>>> below: > >>>>> > >>>>> > http://forum.world.st/OSProcess-command-with-german-umlaut-does-not-work-tp… > >>>>> To start a new topic under Pharo Smalltalk Users, email [hidden > >>>>> email] > >>>>> <http:///user/SendEmail.jtp?type=node&node=4899318&i=1> > >>>>> To unsubscribe from Pharo Smalltalk Users, click here. > >>>>> NAML > >>>>> < > http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instan… > > > >>>>> > >>>> > >>>> > >>>> ------------------------------ > >>>> View this message in context: Re: OSProcess command with german umlaut > >>>> does not work > >>>> < > http://forum.world.st/OSProcess-command-with-german-umlaut-does-not-work-tp… > > > >>>> Sent from the Pharo Smalltalk Users mailing list archive > >>>> <http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html> at > >>>> Nabble.com. > >>>> > >>> > >> > >> > >> > > > > > > > > -- Mariano http://marianopeck.wordpress.com

June 6, 2016

Re: [Pharo-users] OSProcess command with german umlaut does not work

by David T. Lewis

Norbert, You are probably right. I'm not sure the best way to handle it. Dave > Dave, > >> Am 06.06.2016 um 18:13 schrieb David T. Lewis <lewis(a)mail.msen.com>: >> >> Hi Sabine, >> >> That's great that #utf8Encoded is working, thanks for confirming. >> >> I'll look and see if I can add that to OSProcess (I'm traveling and >> cannot >> look at it right now). >> >> Mariano - this thread probably applies to OSSubProcess also. >> > that would just work if the system locale is utf8, right? Wouldn't it be > better to making that a setting? > > Norbert > >> Dave >> >>> Hi Sven, >>> >>> why ByteArray? >>> >>> does not work (Improper store into indexable object): >>> OSProcess command: ('cp >>> /Library/WebServer/Documents/reports/bÃÂ¤r.pdf >>> /Library/WebServer/Documents/reports/test-a.pdf' utf8Encoded asString). >>> >>> works: >>> OSProcess command: ('cp >>> /Library/WebServer/Documents/reports/bÃÂ¤r.pdf >>> /Library/WebServer/Documents/reports/test-a.pdf' utf8Encoded) >>> >>> Perhaps David can add this here: >>> >>> command: aCommandString >>> "Run a command in a shell process. Similar to the system(3) call in the >>> standard C library, >>> except that aCommandString runs asynchronously in a child process. The >>> command is >>> run by a ConnectedUnixProcess in order to facilitate command pipelines >>> within Squeak." >>> >>> "UnixProcess thisOSProcess command: 'ls -l /etc'" >>> >>> | proc | >>> pid isNil >>> ifTrue: >>> [self class noAccessorAvailable. ^nil] >>> ifFalse: >>> [proc := self >>> forkJob: ExternalUnixOSProcess defaultShellPath >>> arguments: (Array with: '-c' with: aCommandString utf8Encoded asString) >>> <<<=== >>> environment: nil >>> descriptors: nil. >>> proc ifNil: [self class noAccessorAvailable]. >>> ^ proc] >>> >>> >>> regards >>> Sabine >>> >>> >>>> >>>> >>> >>> 2016-06-06 8:41 GMT+02:00 Sabine Manaa <manaa.sabine(a)gmail.com>: >>> >>>> Hi Dave, >>>> >>>> I get the german ÃÂ¤ with: >>>> >>>> (Character value: 228) asString >>>> >>>> Do you want me to go in it and suggest a solution or do you want to >>>> try >>>> to >>>> fix it and I test it? >>>> >>>> Thanks for helping! >>>> >>>> Regards Sabine >>>> >>>> 2016-06-05 23:08 GMT+02:00 David T. Lewis [via Smalltalk] <[hidden >>>> email] >>>> <http:///user/SendEmail.jtp?type=node&node=4899318&i=0>>: >>>> >>>>> >>>>> >>>>> ------------------------------ >>>>> If you reply to this email, your message will be added to the >>>>> discussion >>>>> below: >>>>> >>>>> http://forum.world.st/OSProcess-command-with-german-umlaut-does-not-work-tp… >>>>> To start a new topic under Pharo Smalltalk Users, email [hidden >>>>> email] >>>>> <http:///user/SendEmail.jtp?type=node&node=4899318&i=1> >>>>> To unsubscribe from Pharo Smalltalk Users, click here. >>>>> NAML >>>>> <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instan…> >>>>> >>>> >>>> >>>> ------------------------------ >>>> View this message in context: Re: OSProcess command with german umlaut >>>> does not work >>>> <http://forum.world.st/OSProcess-command-with-german-umlaut-does-not-work-tp…> >>>> Sent from the Pharo Smalltalk Users mailing list archive >>>> <http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html> at >>>> Nabble.com. >>>> >>> >> >> >> > >

June 6, 2016

Re: [Pharo-users] OSProcess command with german umlaut does not work

by Norbert Hartl

Dave, > Am 06.06.2016 um 18:13 schrieb David T. Lewis <lewis(a)mail.msen.com>: > > Hi Sabine, > > That's great that #utf8Encoded is working, thanks for confirming. > > I'll look and see if I can add that to OSProcess (I'm traveling and cannot > look at it right now). > > Mariano - this thread probably applies to OSSubProcess also. > that would just work if the system locale is utf8, right? Wouldn't it be better to making that a setting? Norbert > Dave > >> Hi Sven, >> >> why ByteArray? >> >> does not work (Improper store into indexable object): >> OSProcess command: ('cp /Library/WebServer/Documents/reports/bÃÂ¤r.pdf >> /Library/WebServer/Documents/reports/test-a.pdf' utf8Encoded asString). >> >> works: >> OSProcess command: ('cp /Library/WebServer/Documents/reports/bÃÂ¤r.pdf >> /Library/WebServer/Documents/reports/test-a.pdf' utf8Encoded) >> >> Perhaps David can add this here: >> >> command: aCommandString >> "Run a command in a shell process. Similar to the system(3) call in the >> standard C library, >> except that aCommandString runs asynchronously in a child process. The >> command is >> run by a ConnectedUnixProcess in order to facilitate command pipelines >> within Squeak." >> >> "UnixProcess thisOSProcess command: 'ls -l /etc'" >> >> | proc | >> pid isNil >> ifTrue: >> [self class noAccessorAvailable. ^nil] >> ifFalse: >> [proc := self >> forkJob: ExternalUnixOSProcess defaultShellPath >> arguments: (Array with: '-c' with: aCommandString utf8Encoded asString) >> <<<=== >> environment: nil >> descriptors: nil. >> proc ifNil: [self class noAccessorAvailable]. >> ^ proc] >> >> >> regards >> Sabine >> >> >>> >>> >> >> 2016-06-06 8:41 GMT+02:00 Sabine Manaa <manaa.sabine(a)gmail.com>: >> >>> Hi Dave, >>> >>> I get the german ÃÂ¤ with: >>> >>> (Character value: 228) asString >>> >>> Do you want me to go in it and suggest a solution or do you want to try >>> to >>> fix it and I test it? >>> >>> Thanks for helping! >>> >>> Regards Sabine >>> >>> 2016-06-05 23:08 GMT+02:00 David T. Lewis [via Smalltalk] <[hidden >>> email] >>> <http:///user/SendEmail.jtp?type=node&node=4899318&i=0>>: >>> >>>> >>>> >>>> ------------------------------ >>>> If you reply to this email, your message will be added to the >>>> discussion >>>> below: >>>> >>>> http://forum.world.st/OSProcess-command-with-german-umlaut-does-not-work-tp… >>>> To start a new topic under Pharo Smalltalk Users, email [hidden email] >>>> <http:///user/SendEmail.jtp?type=node&node=4899318&i=1> >>>> To unsubscribe from Pharo Smalltalk Users, click here. >>>> NAML >>>> <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instan…> >>>> >>> >>> >>> ------------------------------ >>> View this message in context: Re: OSProcess command with german umlaut >>> does not work >>> <http://forum.world.st/OSProcess-command-with-german-umlaut-does-not-work-tp…> >>> Sent from the Pharo Smalltalk Users mailing list archive >>> <http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html> at >>> Nabble.com. >>> >> > > >

June 6, 2016

Re: [Pharo-users] OSProcess command with german umlaut does not work

by David T. Lewis

Hi Sabine, That's great that #utf8Encoded is working, thanks for confirming. I'll look and see if I can add that to OSProcess (I'm traveling and cannot look at it right now). Mariano - this thread probably applies to OSSubProcess also. Dave > Hi Sven, > > why ByteArray? > > does not work (Improper store into indexable object): > OSProcess command: ('cp /Library/WebServer/Documents/reports/bÃÂ¤r.pdf > /Library/WebServer/Documents/reports/test-a.pdf' utf8Encoded asString). > > works: > OSProcess command: ('cp /Library/WebServer/Documents/reports/bÃÂ¤r.pdf > /Library/WebServer/Documents/reports/test-a.pdf' utf8Encoded) > > Perhaps David can add this here: > > command: aCommandString > "Run a command in a shell process. Similar to the system(3) call in the > standard C library, > except that aCommandString runs asynchronously in a child process. The > command is > run by a ConnectedUnixProcess in order to facilitate command pipelines > within Squeak." > > "UnixProcess thisOSProcess command: 'ls -l /etc'" > > | proc | > pid isNil > ifTrue: > [self class noAccessorAvailable. ^nil] > ifFalse: > [proc := self > forkJob: ExternalUnixOSProcess defaultShellPath > arguments: (Array with: '-c' with: aCommandString utf8Encoded asString) > <<<=== > environment: nil > descriptors: nil. > proc ifNil: [self class noAccessorAvailable]. > ^ proc] > > > regards > Sabine > > >> >> > > 2016-06-06 8:41 GMT+02:00 Sabine Manaa <manaa.sabine(a)gmail.com>: > >> Hi Dave, >> >> I get the german ÃÂ¤ with: >> >> (Character value: 228) asString >> >> Do you want me to go in it and suggest a solution or do you want to try >> to >> fix it and I test it? >> >> Thanks for helping! >> >> Regards Sabine >> >> 2016-06-05 23:08 GMT+02:00 David T. Lewis [via Smalltalk] <[hidden >> email] >> <http:///user/SendEmail.jtp?type=node&node=4899318&i=0>>: >> >>> >>> >>> ------------------------------ >>> If you reply to this email, your message will be added to the >>> discussion >>> below: >>> >>> http://forum.world.st/OSProcess-command-with-german-umlaut-does-not-work-tp… >>> To start a new topic under Pharo Smalltalk Users, email [hidden email] >>> <http:///user/SendEmail.jtp?type=node&node=4899318&i=1> >>> To unsubscribe from Pharo Smalltalk Users, click here. >>> NAML >>> <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instan…> >>> >> >> >> ------------------------------ >> View this message in context: Re: OSProcess command with german umlaut >> does not work >> <http://forum.world.st/OSProcess-command-with-german-umlaut-does-not-work-tp…> >> Sent from the Pharo Smalltalk Users mailing list archive >> <http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html> at >> Nabble.com. >> >

June 6, 2016

magma for pharo 5.

by francescoagati

Hi, someone know the state of Magma for pharo5? there is a port of magma for pharo 5? -- View this message in context: http://forum.world.st/magma-for-pharo-5-tp4899426.html Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

June 6, 2016

Re: [Pharo-users] OSProcess command with german umlaut does not work

by Sabine Manaa

Hi Sven, why ByteArray? does not work (Improper store into indexable object): OSProcess command: ('cp /Library/WebServer/Documents/reports/bÃ¤r.pdf /Library/WebServer/Documents/reports/test-a.pdf' utf8Encoded asString). works: OSProcess command: ('cp /Library/WebServer/Documents/reports/bÃ¤r.pdf /Library/WebServer/Documents/reports/test-a.pdf' utf8Encoded) Perhaps David can add this here: command: aCommandString "Run a command in a shell process. Similar to the system(3) call in the standard C library, except that aCommandString runs asynchronously in a child process. The command is run by a ConnectedUnixProcess in order to facilitate command pipelines within Squeak." "UnixProcess thisOSProcess command: 'ls -l /etc'" | proc | pid isNil ifTrue: [self class noAccessorAvailable. ^nil] ifFalse: [proc := self forkJob: ExternalUnixOSProcess defaultShellPath arguments: (Array with: '-c' with: aCommandString utf8Encoded asString) <<<=== environment: nil descriptors: nil. proc ifNil: [self class noAccessorAvailable]. ^ proc] regards Sabine > > 2016-06-06 8:41 GMT+02:00 Sabine Manaa <manaa.sabine(a)gmail.com>: > Hi Dave, > > I get the german Ã¤ with: > > (Character value: 228) asString > > Do you want me to go in it and suggest a solution or do you want to try to > fix it and I test it? > > Thanks for helping! > > Regards Sabine > > 2016-06-05 23:08 GMT+02:00 David T. Lewis [via Smalltalk] <[hidden email] > <http:///user/SendEmail.jtp?type=node&node=4899318&i=0>>: > >> >> >> ------------------------------ >> If you reply to this email, your message will be added to the discussion >> below: >> >> http://forum.world.st/OSProcess-command-with-german-umlaut-does-not-work-tp… >> To start a new topic under Pharo Smalltalk Users, email [hidden email] >> <http:///user/SendEmail.jtp?type=node&node=4899318&i=1> >> To unsubscribe from Pharo Smalltalk Users, click here. >> NAML >> <http://forum.world.st/template/NamlServlet.jtp?macro=macro_viewer&id=instan…> >> > > > ------------------------------ > View this message in context: Re: OSProcess command with german umlaut > does not work > <http://forum.world.st/OSProcess-command-with-german-umlaut-does-not-work-tp…> > Sent from the Pharo Smalltalk Users mailing list archive > <http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html> at Nabble.com. >

June 6, 2016

Re: [Pharo-users] One comment to new Pharo5 debugger

by Johan Fabry

That looks really great ! It solves the practical problem and, for me, also addresses the conceptual issues that Doru has. Doru, what do you think of this solution? The buttons are still connected to the stack, they are just below the stack instead of on top. I also donât see why a âStackâ label is necessary, so it makes sense to me to remove it to gain some space. -- Does this mail seem too brief? Sorry for that, I donât mean to be rude! Please see http://emailcharter.org <http://emailcharter.org/> . Johan Fabry - http://pleiad.cl/~jfabry PLEIAD and RyCh labs - Computer Science Department (DCC) - University of Chile > On Jun 4, 2016, at 13:36, Gabriel Cotelli <g.cotelli(a)gmail.com> wrote: > > Well I put the buttons on the left on purpose because in the case you're debugging source code the content tends to be on the left half of the screen. So this keeps the actions close to the decision on what to use.

June 6, 2016

Re: [Pharo-users] [ANN] Glorp-SQLite3 for Pharo 5

by Pierce Ng

On Sun, Jun 05, 2016 at 03:38:17PM -0700, francescoagati wrote: > NBSQLite3DatabaseAccessor isn't present. i have substitute with > DatabaseAccessor. > but i have this error unable to connect Try this: | login accessor | login := Login new database: UDBCSQLite3Platform new; host: SmalltalkImage current imagePath asFileReference parent fullName, FileSystem disk delimiter asString; port: ''; username: ''; password: ''; databaseName: 'sodbxtestu.db'; yourself. PharoDatabaseAccessor DefaultDriver: GlorpSQLite3Driver. accessor := PharoDatabaseAccessor forLogin: login. accessor login. (accessor executeSQLString: 'select * from sqlite_master') explore. accessor logout. Pierce

June 6, 2016