June 2016 - Pharo-users - lists.pharo.org

Re: [Pharo-users] #inform: Changed in 5.0?

by Denis Kudriashov

Hi 2016-06-17 17:10 GMT+02:00 Sean P. DeNigris <sean(a)clipperadams.com>: > During startup, I do `UIManager default inform: aString`. It used to show a > Growl morph, > Do you perform it inside #defer: message?

June 19, 2016

Re: [Pharo-users] #inform: Changed in 5.0?

by stepharo

Hi sean which startup? Stef Le 17/6/16 Ã 17:10, Sean P. DeNigris a Ã©crit : > During startup, I do `UIManager default inform: aString`. It used to show a > Growl morph, but now opens a debugger. Did something change? If so, why and > how do I circumvent the debugger? Thanks. > > > > ----- > Cheers, > Sean > -- > View this message in context: http://forum.world.st/inform-Changed-in-5-0-tp4901478.html > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > >

June 19, 2016

Re: [Pharo-users] Pharo 5 and Seaside

by Mark Bratcher

Ironically I just tried the two approaches Gofer vs. Catalog Browser on the NBSQLite3 package, and in that case the Catalog Browser loaded successfully but Gofer gave me an error. Sent from TypeApp On Jun 19, 2016, 6:42 AM, at 6:42 AM, jtuchel(a)objektfabrik.de wrote: > > >Mark, > >I am sure I didnât load all prerequisites. Thatâs what I thought the >Catalog Browser and its machinery would do for me. If I understand >Estebanâs answer correctly, that is the idea, but for some changes that >havenât been reflected for Seaside3 yet, it didnât work. > >So I guess the snippet you provided is the way to go. > >Thanks for answering and looking into this > >Joachim > >Von: Mark Bratcher >Gesendet: Sonntag, 19. Juni 2016 12:11 >An: pharo-users(a)lists.pharo.org >Betreff: Re: [Pharo-users] Pharo 5 and Seaside > >I'm running Pharo 5 on Windows. When I installed Seaside 3, I just used >the instructions given for Gofer (entered in the Playground and >executed there). I downloaded the base package: >Gofer new >url:'http://www.smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main'; > package: 'ConfigurationOfSeaside3'; > load. >((Smalltalk at: #ConfigurationOfSeaside3) project version: #stable) >load. >I also tried the alternative Gofer instructions shown, and they also >worked without dependency error. So depending upon how you actually did >your load of Seaside 3, maybe you didn't pull in all the dependent >packages. >Mark > >On 6/19/2016 4:31 AM, jtuchel(a)objektfabrik.de wrote: >Hi, > >I just downloaded Pharo 5 from pharo.org clicked on the MacOS X >button), opened the Catalog Browser and wanted to load / install >Seaside. I must admit I didn't read anything before I did... ;-) >Here are a few remarks: >â¢ Download and installation on OS X El Capitan went smoothly, just the >usual security warning ion first opening. Since I know Pharo is no >malware ( ;-) ), this was not an issue >â¢ There are several entries for Seaside, most of them warn me they are >not tested/blessed for Pharo 5. They do not have a "Pharo 5" tag. So >they could possibly be ommitted in this default view? >â¢ The "Seaside 3" entry seems to be the suitable one, but fails with >"This package depends on the following classes: >Â ContextPart" >â¢ it is not really obvious what the difference between "install stable >version" and "install stable version and create group" is. The word >group is something without any meaning in the context of Smalltalk to >me... I clicked on the top-most entry just because I thought it's first >in the menu for a reason. >So I didn't really get far in this Sunday-morning-experiment :-( >Joachim > > > >-- >----------------------------------------------------------------------- >Objektfabrik Joachim Tuchel mailto:jtuchel@objektfabrik.de >Fliederweg 1Â Â Â Â Â Â Â Â Â Â Â Â Â http://www.objektfabrik.de >D-71640 Ludwigsburg http://joachimtuchel.wordpress.com >Telefon: +49 7141 56 10 86 0Â Â Â Â Â Fax: +49 7141 56 10 86 1

June 19, 2016

Re: [Pharo-users] Seamless

by Denis Kudriashov

Hi 2016-06-18 21:45 GMT+02:00 francescoagati <francescoagati1975(a)gmail.com>: > Hi, > i am testing with seamless on pharo 5 and all works really good. the only > problem i see if i try to save the state of the image. if there is a > connection active the vm freeze and stop to work. the only think i can do > is > quit and reopen it losing all changes. > New version is here http://smalltalkhub.com/#!/~Pharo/Seamless (I will announce it soon). Do you use this one?

June 19, 2016

Re: [Pharo-users] Pharo 5 and Seaside

by Mark Bratcher

Joachim - Apologies I don't have any experience to offer with the Catalog Browser. I hadn't tried that method for loading the package. I would, however, expect it would do the equivalent action as the Gofer command. It would be an interesting experiment to see if Gofer works with a clean image, just as a comparison. Mark On 6/19/2016 6:41 AM, jtuchel(a)objektfabrik.de wrote: > > Mark, > > I am sure I didnât load all prerequisites. Thatâs what I thought the > Catalog Browser and its machinery would do for me. If I understand > Estebanâs answer correctly, that is the idea, but for some changes > that havenât been reflected for Seaside3 yet, it didnât work. > > So I guess the snippet you provided is the way to go. > > Thanks for answering and looking into this > > Joachim > > *Von: *Mark Bratcher <mailto:mdbratch@gmail.com> > *Gesendet: *Sonntag, 19. Juni 2016 12:11 > *An: *pharo-users(a)lists.pharo.org <mailto:pharo-users@lists.pharo.org> > *Betreff: *Re: [Pharo-users] Pharo 5 and Seaside > > I'm running Pharo 5 on Windows. When I installed Seaside 3, I just > used the instructions given for Gofer (entered in the Playground and > executed there). I downloaded the base package: > > Gofernew > url:'http://www.smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main'; > package:'ConfigurationOfSeaside3'; > load. > ((Smalltalkat:#ConfigurationOfSeaside3)projectversion:#stable)load. > > I also tried the alternative Gofer instructions shown, and they also > worked without dependency error. So depending upon how you actually > did your load of Seaside 3, maybe you didn't pull in all the dependent > packages. > > Mark > > On 6/19/2016 4:31 AM, jtuchel(a)objektfabrik.de > <mailto:jtuchel@objektfabrik.de> wrote: > > Hi, > > I just downloaded Pharo 5 from pharo.org clicked on the MacOS X > button), opened the Catalog Browser and wanted to load / install > Seaside. I must admit I didn't read anything before I did... ;-) > > Here are a few remarks: > > * Download and installation on OS X El Capitan went smoothly, > just the usual security warning ion first opening. Since I > know Pharo is no malware ( ;-) ), this was not an issue > * There are several entries for Seaside, most of them warn me > they are not tested/blessed for Pharo 5. They do not have a > "Pharo 5" tag. So they could possibly be ommitted in this > default view? > * The "Seaside 3" entry seems to be the suitable one, but fails > with "This package depends on the following classes: > ContextPart" > * it is not really obvious what the difference between "install > stable version" and "install stable version and create group" > is. The word group is something without any meaning in the > context of Smalltalk to me... I clicked on the top-most entry > just because I thought it's first in the menu for a reason. > > So I didn't really get far in this Sunday-morning-experiment :-( > > Joachim > > > > -- > > ----------------------------------------------------------------------- > > Objektfabrik Joachim Tuchelmailto:jtuchel@objektfabrik.de > > Fliederweg 1http://www.objektfabrik.de > > D-71640 Ludwigsburghttp://joachimtuchel.wordpress.com > > Telefon: +49 7141 56 10 86 0 Fax: +49 7141 56 10 86 1 >

June 19, 2016

Re: [Pharo-users] Can't get an SQLite connection to work

by Mark Bratcher

Forgot to mention... I tried a few different strings for the connectFromString, but here are a couple of examples I tried, with the same error: connection := GADriver fromConnectionString: 'SQLite3:///home/mark/Desktop/pharo5.0/projects/test_data.db'. connection := GADriver fromConnectionString: 'SQLite3://home/mark/Desktop/pharo5.0/projects/test_data.db'. connection := GADriver fromConnectionString: 'SQLite3://filename:/home/mark/Desktop/pharo5.0/projects/test_data.db'. Then the error would occur on an attempt to connect: connection connect On 6/19/2016 6:35 AM, Mark Bratcher wrote: > Hello. > > When I try to connect to an SQLite database using the DBXTalk/Garage > SQLite3 driver, I made sure I had the SQLite driver .so file in the > proper location and everything. Ultimately, the error I'm getting now > is: "KeyNotFound: key #filename not found in Dictionary". > > I also tried using NBSQLite3, but have not been able to successfully > load it with the instructions given on smalltalkhub.com for the stable > version. The Gofer load results in the error, "MessageNotUnderstood: > receiver of "forCurrentPlatform" is nil". > > I did quite a bit of investigating of each of these errors and can't > seem to find my way around them. Has anyone else encountered them or > are these a sign of something obvious I'm doing incorrectly? I know > I've haven't given much information here, so if there's something > specific you need to know, please ask. :) > > Mark >

June 19, 2016

Re: [Pharo-users] Pharo 5 and Seaside

by jtuchel＠objektfabrik.de

Mark, I am sure I didnât load all prerequisites. Thatâs what I thought the Catalog Browser and its machinery would do for me. If I understand Estebanâs answer correctly, that is the idea, but for some changes that havenât been reflected for Seaside3 yet, it didnât work. So I guess the snippet you provided is the way to go. Thanks for answering and looking into this Joachim Von: Mark Bratcher Gesendet: Sonntag, 19. Juni 2016 12:11 An: pharo-users(a)lists.pharo.org Betreff: Re: [Pharo-users] Pharo 5 and Seaside I'm running Pharo 5 on Windows. When I installed Seaside 3, I just used the instructions given for Gofer (entered in the Playground and executed there). I downloaded the base package: Gofer new url:'http://www.smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main'; package: 'ConfigurationOfSeaside3'; load. ((Smalltalk at: #ConfigurationOfSeaside3) project version: #stable) load. I also tried the alternative Gofer instructions shown, and they also worked without dependency error. So depending upon how you actually did your load of Seaside 3, maybe you didn't pull in all the dependent packages. Mark On 6/19/2016 4:31 AM, jtuchel(a)objektfabrik.de wrote: Hi, I just downloaded Pharo 5 from pharo.org clicked on the MacOS X button), opened the Catalog Browser and wanted to load / install Seaside. I must admit I didn't read anything before I did... ;-) Here are a few remarks: â¢ Download and installation on OS X El Capitan went smoothly, just the usual security warning ion first opening. Since I know Pharo is no malware ( ;-) ), this was not an issue â¢ There are several entries for Seaside, most of them warn me they are not tested/blessed for Pharo 5. They do not have a "Pharo 5" tag. So they could possibly be ommitted in this default view? â¢ The "Seaside 3" entry seems to be the suitable one, but fails with "This package depends on the following classes: Â ContextPart" â¢ it is not really obvious what the difference between "install stable version" and "install stable version and create group" is. The word group is something without any meaning in the context of Smalltalk to me... I clicked on the top-most entry just because I thought it's first in the menu for a reason. So I didn't really get far in this Sunday-morning-experiment :-( Joachim -- ----------------------------------------------------------------------- Objektfabrik Joachim Tuchel mailto:jtuchel@objektfabrik.de Fliederweg 1Â Â Â Â Â Â Â Â Â Â Â Â Â http://www.objektfabrik.de D-71640 Ludwigsburg http://joachimtuchel.wordpress.com Telefon: +49 7141 56 10 86 0Â Â Â Â Â Fax: +49 7141 56 10 86 1

June 19, 2016

Can't get an SQLite connection to work

by Mark Bratcher

Hello. When I try to connect to an SQLite database using the DBXTalk/Garage SQLite3 driver, I made sure I had the SQLite driver .so file in the proper location and everything. Ultimately, the error I'm getting now is: "KeyNotFound: key #filename not found in Dictionary". I also tried using NBSQLite3, but have not been able to successfully load it with the instructions given on smalltalkhub.com for the stable version. The Gofer load results in the error, "MessageNotUnderstood: receiver of "forCurrentPlatform" is nil". I did quite a bit of investigating of each of these errors and can't seem to find my way around them. Has anyone else encountered them or are these a sign of something obvious I'm doing incorrectly? I know I've haven't given much information here, so if there's something specific you need to know, please ask. :) Mark

June 19, 2016

Re: [Pharo-users] Pharo 5 and Seaside

by Mark Bratcher

I'm running Pharo 5 on Windows. When I installed Seaside 3, I just used the instructions given for Gofer (entered in the Playground and executed there). I downloaded the base package: Gofer new url:'http://www.smalltalkhub.com/mc/Seaside/MetacelloConfigurations/main'; package: 'ConfigurationOfSeaside3'; load. ((Smalltalk at: #ConfigurationOfSeaside3) project version: #stable) load. I also tried the alternative Gofer instructions shown, and they also worked without dependency error. So depending upon how you actually did your load of Seaside 3, maybe you didn't pull in all the dependent packages. Mark On 6/19/2016 4:31 AM, jtuchel(a)objektfabrik.de wrote: > > Hi, > > > I just downloaded Pharo 5 from pharo.org clicked on the MacOS X > button), opened the Catalog Browser and wanted to load / install > Seaside. I must admit I didn't read anything before I did... ;-) > > Here are a few remarks: > > * Download and installation on OS X El Capitan went smoothly, just > the usual security warning ion first opening. Since I know Pharo > is no malware ( ;-) ), this was not an issue > * There are several entries for Seaside, most of them warn me they > are not tested/blessed for Pharo 5. They do not have a "Pharo 5" > tag. So they could possibly be ommitted in this default view? > * The "Seaside 3" entry seems to be the suitable one, but fails with > "This package depends on the following classes: > ContextPart" > * it is not really obvious what the difference between "install > stable version" and "install stable version and create group" is. > The word group is something without any meaning in the context of > Smalltalk to me... I clicked on the top-most entry just because I > thought it's first in the menu for a reason. > > So I didn't really get far in this Sunday-morning-experiment :-( > > Joachim > > > > -- > ----------------------------------------------------------------------- > Objektfabrik Joachim Tuchelmailto:jtuchel@objektfabrik.de > Fliederweg 1http://www.objektfabrik.de > D-71640 Ludwigsburghttp://joachimtuchel.wordpress.com > Telefon: +49 7141 56 10 86 0 Fax: +49 7141 56 10 86 1 >

June 19, 2016

Re: [Pharo-users] Pharo 5 and Seaside

by Esteban Lorenzano

Hi, thanks for the feedbackâ¦ yes we are in the process of cleaning the catalog, to make thing easy. In the case of Seaside, the problem is that configuration convention name changed these years and then there are older and newer configurations coexisting (30, 3, etc.). As you correctly guessed, correct one is Seaside3. About the catalog, yes, probably is not clear at allâ¦ it refers to âcreate a group in browserâ, which is handy for install projects and see them all reunitedâ¦ cheers, Esteban > On 19 Jun 2016, at 10:31, jtuchel(a)objektfabrik.de wrote: > > Hi, > > > I just downloaded Pharo 5 from pharo.org clicked on the MacOS X button), opened the Catalog Browser and wanted to load / install Seaside. I must admit I didn't read anything before I did... ;-) > Here are a few remarks: > > Download and installation on OS X El Capitan went smoothly, just the usual security warning ion first opening. Since I know Pharo is no malware ( ;-) ), this was not an issue > There are several entries for Seaside, most of them warn me they are not tested/blessed for Pharo 5. They do not have a "Pharo 5" tag. So they could possibly be ommitted in this default view? > The "Seaside 3" entry seems to be the suitable one, but fails with "This package depends on the following classes: > ContextPart" > it is not really obvious what the difference between "install stable version" and "install stable version and create group" is. The word group is something without any meaning in the context of Smalltalk to me... I clicked on the top-most entry just because I thought it's first in the menu for a reason. > So I didn't really get far in this Sunday-morning-experiment :-( > > Joachim > > > -- > ----------------------------------------------------------------------- > Objektfabrik Joachim Tuchel mailto:jtuchel@objektfabrik.de <mailto:jtuchel@objektfabrik.de> > Fliederweg 1 http://www.objektfabrik.de <http://www.objektfabrik.de/> > D-71640 Ludwigsburg http://joachimtuchel.wordpress.com <http://joachimtuchel.wordpress.com/> > Telefon: +49 7141 56 10 86 0 Fax: +49 7141 56 10 86 1 >

June 19, 2016