May 2014 - Pharo-users - lists.pharo.org

Re: [Pharo-users] Updating packages from command line

by Esteban Lorenzano

pharo-vm-nox Pharo.image config http://smalltalkhub.com/mc/bromagosa/StarUOCs/main ConfigurationOfStarUOCs âinstall=development has to work. All out infrastructure is based on that :) Esteban On 02 May 2014, at 15:05, Bernat Romagosa <tibabenfortlapalanca(a)gmail.com> wrote: > Hmm it doesn't seem to work... > > pharo-vm-nox Pharo.image config http://smalltalkhub.com/mc/bromagosa/StarUOCs/main > KeyNotFound: key #ConfigurationOfStarUOCs not found in SystemDictionary > > But the config is there and I can load it from the GUI by doing: > > > Gofer new > smalltalkhubUser: 'bromagosa' project: 'StarUOCs'; > package: 'ConfigurationOfStarUOCs'; > load. > > ConfigurationOfStarUOCs load. > > What can be happening? My version is: > > pharo-vm-nox Pharo.image printVersion > [version] 3.0 #30846 > > > > 2014-05-02 13:51 GMT+02:00 Bernat Romagosa <tibabenfortlapalanca(a)gmail.com>: > I see, thanks a lot! :) > > > 2014-05-02 13:45 GMT+02:00 Sven Van Caekenberghe <sven(a)stfx.eu>: > > The best approach is to use Configurations and the config handler: > > $ ./pharo Pharo.image config > Command line handler for dealing with Metacello configurations from the command line > > Usage: config [--help] <repository url> [<configuration>] [--install[=<version>]] [--group=<group>] [--username=<username>] [--password=<password>] > --help show this help message > <repository url> A Monticello repository name > <configuration> A valid Metacello Configuration name > <version> A valid version for the given configuration > <group> A valid Metacello group name > <username> An optional username to access the configuration's repository > <password> An optional password to access the configuration's repository > > Examples: > # display this help message > pharo Pharo.image config > > # list all configurations of a repository > pharo Pharo.image config $MC_REPOS_URL > > # list all the available versions of a confgurtation > pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo > > # install the stable version > pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo --install > > #install a specific version '1.5' > pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo --install=1.5 > > #install a specific version '1.5' and only a specific group 'Tests' > pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo --install=1.5 --group=Tests > > The following article contains this approach as well: > > http://zn.stfx.eu/zn/build-and-deploy-1st-webapp/ > > http://zn.stfx.eu/zn/build-and-deploy-1st-webapp/#deployingforproduction > > HTH, > > Sven > > On 02 May 2014, at 13:28, Bernat Romagosa <tibabenfortlapalanca(a)gmail.com> wrote: > > > Is there a way to do it? > > > > Here's my attempt: > > > > pharo-vm-nox MyImage.image eval "Gofer new smalltalkhubUser: 'myUser' project: 'MyProject'; package: 'MyPackage'; load. Smalltalk snapshot: true andQuit: true" > > > > then: > > > > pharo-vm-nox MyImage.image eval --no-quit "MyJustLoadedClass start" > > > > results in: > > > > UndefinedObject>>DoIt (MyJustLoadedClass is Undeclared) > > MessageNotUnderstood: receiver of "start" is nil > > > > Thanks! > > Bernat. > > > > -- > > Bernat Romagosa. > > > > > > -- > Bernat Romagosa. > > > > -- > Bernat Romagosa.

May 2, 2014

Re: [Pharo-users] Updating packages from command line

by Bernat Romagosa

Hmm it doesn't seem to work... *pharo-vm-nox Pharo.image config http://smalltalkhub.com/mc/bromagosa/StarUOCs/main <http://smalltalkhub.com/mc/bromagosa/StarUOCs/main>* *KeyNotFound: key #ConfigurationOfStarUOCs not found in SystemDictionary* But the config is there and I can load it from the GUI by doing: *Gofer new* * smalltalkhubUser: 'bromagosa' project: 'StarUOCs';* * package: 'ConfigurationOfStarUOCs';* * load.* *ConfigurationOfStarUOCs load.* What can be happening? My version is: *pharo-vm-nox Pharo.image printVersion* *[version] 3.0 #30846* 2014-05-02 13:51 GMT+02:00 Bernat Romagosa <tibabenfortlapalanca(a)gmail.com>: > I see, thanks a lot! :) > > > 2014-05-02 13:45 GMT+02:00 Sven Van Caekenberghe <sven(a)stfx.eu>: > > The best approach is to use Configurations and the config handler: >> >> $ ./pharo Pharo.image config >> Command line handler for dealing with Metacello configurations from the >> command line >> >> Usage: config [--help] <repository url> [<configuration>] >> [--install[=<version>]] [--group=<group>] [--username=<username>] >> [--password=<password>] >> --help show this help message >> <repository url> A Monticello repository name >> <configuration> A valid Metacello Configuration name >> <version> A valid version for the given configuration >> <group> A valid Metacello group name >> <username> An optional username to access the >> configuration's repository >> <password> An optional password to access the >> configuration's repository >> >> Examples: >> # display this help message >> pharo Pharo.image config >> >> # list all configurations of a repository >> pharo Pharo.image config $MC_REPOS_URL >> >> # list all the available versions of a confgurtation >> pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo >> >> # install the stable version >> pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo >> --install >> >> #install a specific version '1.5' >> pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo >> --install=1.5 >> >> #install a specific version '1.5' and only a specific group >> 'Tests' >> pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo >> --install=1.5 --group=Tests >> >> The following article contains this approach as well: >> >> http://zn.stfx.eu/zn/build-and-deploy-1st-webapp/ >> >> http://zn.stfx.eu/zn/build-and-deploy-1st-webapp/#deployingforproduction >> >> HTH, >> >> Sven >> >> On 02 May 2014, at 13:28, Bernat Romagosa <tibabenfortlapalanca(a)gmail.com> >> wrote: >> >> > Is there a way to do it? >> > >> > Here's my attempt: >> > >> > pharo-vm-nox MyImage.image eval "Gofer new smalltalkhubUser: 'myUser' >> project: 'MyProject'; package: 'MyPackage'; load. Smalltalk snapshot: true >> andQuit: true" >> > >> > then: >> > >> > pharo-vm-nox MyImage.image eval --no-quit "MyJustLoadedClass start" >> > >> > results in: >> > >> > UndefinedObject>>DoIt (MyJustLoadedClass is Undeclared) >> > MessageNotUnderstood: receiver of "start" is nil >> > >> > Thanks! >> > Bernat. >> > >> > -- >> > Bernat Romagosa. >> >> >> > > > -- > Bernat Romagosa. > -- Bernat Romagosa.

May 2, 2014

Re: [Pharo-users] Video Tutorials about Pharo

by kilon alios

Thanks you guys for your support, I really appreciate it. Stephane had no idea you have uploaded video tutorials, great . I will use them as inspiration for my future tutorials. I have uploaded another one for "Inheritance" and many more are to come. I decided however to also help you with Pharo by Example, since video tutorials are harder to update. That means less frequent video tutorials but I think its a better choice. I do prefer text from video for my own learning as well. And I hope to finish the website draft I have proposed by this weekend, add the section on the debugger and live coding. On Thu, May 1, 2014 at 4:32 PM, stepharo <stepharo(a)free.fr> wrote: > I always wanted to redo my old videos. > http://stephane.ducasse.free.fr/Videos/ > > and this is good that you start. > Keep pushing. > > Stef > > > > On 26/4/14 20:16, kilon alios wrote: > >> Hello pharoers . I have created a playlist in youtube where in the past >> few days I am keep adding new tutorials about the basics of Pharo. >> >> https://www.youtube.com/watch?v=Ol5ivaEATLQ&list= >> PLqbtQ7OkSta0ULYAd7Qdxof851ybh-_m_ >> >> For now I am focusing on the vary basics. So far the tutorials are >> >> 1) Why Pharo -> Explaining why I love Pharo and what Pharo is. >> 2) Install Pharo >> 3) Create a Class >> 4) Workspace Variables >> 5) Instance Variables >> 6) Temporary Variables >> >> I try to keep the duration at most around 10 minutes , if I can around >> 3-4 minutes. My goals is to focus on one or two features per tutorial. >> >> My focus for now is explaining the basics of Pharo the Language and Pharo >> the IDE. I hope however that after that I will have the energy and time to >> focus on Pharo libraries, like Nativeboost, Athens, Roosal , Sockets and >> many more. >> >> If my free time holds and I do not run out of steam, I should be able to >> produce around 30 - 60 hours per year of Video Tutorials that will be able >> to document a ton of Pharo functionality. >> >> Already the Playlist is over an hour long and I try to keep my tutorials >> focused entirely on the practical side. >> >> Your comments and support is greatly appreciated. >> > > >

May 2, 2014

Bug in Nautilus - Add Class versus Add Full Class

by kmo

Nautilus gives you two options to create a class: /Add Class/ and /Add Full Class/. But both options give you exactly the same template to fill in. There is no difference between them. This is because the class methods /AbstractTool>>defineFullClassTemplate / and /AbstractTool>>defineClassTemplate / return exactly the same templates. I take it this is a bug. -- View this message in context: http://forum.world.st/Bug-in-Nautilus-Add-Class-versus-Add-Full-Class-tp475… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

May 2, 2014

Re: [Pharo-users] SOAP in Pharo

by S Krish

Or: http://www.magentocommerce.com/api/rest/introduction.html REST is a clean approach.. OAuth2 you can perhaps do with Zinc and SSL.. ( http://blog.doit.st/2011/02/15/cloudforksso-openid-and-oauth-support-for-sm…) On Fri, May 2, 2014 at 6:03 PM, S Krish <krishnamachari.sudhakar(a)gmail.com>wrote: > XML-RPC > > To use XML-RPC, load the following URL into your XML-RPC client: > > http://magentohost/api/xmlrpc/ > > The XML-RPC supports the version 1 of the Magento API. and the API it > supports is quite extensive.. > > > Another Approach: > > One can with some ingenuity mix a bit of groovy to deal with complex SOAP > and reduce it enough for the Pharo to deal with it in XML RPC if you have > to go that way. > > SoapOpera I am sure will give you a bit of grief, unless you plan to fix > it.. while you use it. > > > > > > > On Fri, May 2, 2014 at 5:15 PM, Thushar G R <thushar.gr(a)gmail.com> wrote: > >> Hi, >> XMLRPC may not be enough. I have tried some of the request using the >> XMLRPC and it works but i am not sure if its enough for managing all the >> requests. I am trying to connect to a magento site. and their recommended >> approach is unfortunately soap. SoapOpera updating is a possibility it >> seems, am i right? Also any paid paid solution is not practical for us at >> the momment. >> >> Also i hope the SoapOpera is latest at squeakSource and that it was last >> updated in 2010. >> >> thanks for the replies >> >> Thushar >> >> *G R Thushar* >> *Team Leader(Technology),* >> *Signos Software Solutions Pvt. Ltd.* >> *Ground Floor **A.R Plaza, TC 11/43 (2),* >> *P.M.G Junction,* >> *Thiruvananthapuram, 695004. Kerala, India.* >> >> *Web: www.signossolutions.com <http://www.signossolutions.com>* >> Email: thushar.gr(a)signossolutions.com, thushar.gr(a)gmail.com >> Phone: +919846577772 >> >> >> >> >> >> On Fri, May 2, 2014 at 5:03 PM, phil(a)highoctane.be <phil(a)highoctane.be>wrote: >> >>> Pharo lacks a SOAP stack. >>> >>> This is something that also limits it in environments where a ton of >>> APIs are in SOAP format. E.g. Banks, Insurance, Media, Government >>> (including European Institutions). >>> For SaaS apps, who cares. >>> >>> Java and .NET have full stacks and that's a significant factor for their >>> use. >>> VisualWorks support those: as in: >>> >>> http://www.cincomsmalltalk.com/main/products/visualworks/ >>> >>> - *Major improvements to WSDL 2.0 / SOAP 1.2 to handle updated >>> protocols.* >>> >>> FWIW, my approach is to have a Java endpoint that will pass stuff back >>> and forth through RabbitMQ or whatever middleware. >>> >>> When you get into SOAP over JMS, with JMS being WebsphereMQ for example, >>> well, things get complicated, especially when you factor in certificates. >>> And sometimes you need compliance and certification. >>> >>> IBM has a product to help solve those things: >>> http://www-03.ibm.com/software/products/en/datapower. >>> I led a team that used it extensively for a couple of months. It works >>> well. The price tag is quite hard to swallow for little systems and >>> companies. >>> >>> <featurelist> >>> >>> "The IBMÂ® WebSphereÂ® DataPowerÂ® Service Gateway XG45 appliance helps you >>> secure and govern web traffic more effectively. It provides an advanced >>> data threat reduction and security enforcement layer for web and >>> on-premises applications, while giving you the flexibility to deploy new >>> applications rapidly. >>> >>> The IBM WebSphere DataPower Service Gateway XG45 appliance helps you: >>> >>> - Strengthen compliance using robust data protection, policy >>> enforcement and auditing capabilities >>> - Gain âfront-line defenseâ for inbound and outbound traffic through >>> a web 2.0 gateway. >>> - Separate security concerns from application code with an optional >>> hardware security module (HSM) that is certified for FIPS 140-2 Level 3. >>> - Integrate applications for improved application and database >>> connectivity." >>> >>> </featurelist> >>> >>> If you have something around, you can bridge SOAP to whatever, including >>> REST. The new versions do support JSON etc as well. >>> >>> >>> Phil >>> >>> >>> >>> On Fri, May 2, 2014 at 12:26 PM, S Krish < >>> krishnamachari.sudhakar(a)gmail.com> wrote: >>> >>>> Are you looking for a SOAP client for RPC style calls or document >>>> format. >>>> >>>> For the former adding a simple SOAP Envelope to the request and using >>>> ZnClient should work fairly well. >>>> >>>> But if you are looking for something like : >>>> http://www.soapclient.com/soaptest.html to be used against a declared >>>> WSDL.. I doubt if any exists. >>>> >>>> Look at the XMLRPC package and see if you can work from there.. if you >>>> need to adapt something.. >>>> >>>> >>>> On Fri, May 2, 2014 at 3:29 PM, Thushar G R <thushar.gr(a)gmail.com>wrote: >>>> >>>>> Hi, >>>>> >>>>> Do we have a SOAP client in pharo? I checked SoapOpera but seems its >>>>> too old to work with latest pharo 2.0. >>>>> >>>>> Thanks, >>>>> >>>>> >>>> >>> >> >

May 2, 2014

Re: [Pharo-users] SOAP in Pharo

by S Krish

XML-RPC To use XML-RPC, load the following URL into your XML-RPC client: http://magentohost/api/xmlrpc/ The XML-RPC supports the version 1 of the Magento API. and the API it supports is quite extensive.. Another Approach: One can with some ingenuity mix a bit of groovy to deal with complex SOAP and reduce it enough for the Pharo to deal with it in XML RPC if you have to go that way. SoapOpera I am sure will give you a bit of grief, unless you plan to fix it.. while you use it. On Fri, May 2, 2014 at 5:15 PM, Thushar G R <thushar.gr(a)gmail.com> wrote: > Hi, > XMLRPC may not be enough. I have tried some of the request using the > XMLRPC and it works but i am not sure if its enough for managing all the > requests. I am trying to connect to a magento site. and their recommended > approach is unfortunately soap. SoapOpera updating is a possibility it > seems, am i right? Also any paid paid solution is not practical for us at > the momment. > > Also i hope the SoapOpera is latest at squeakSource and that it was last > updated in 2010. > > thanks for the replies > > Thushar > > *G R Thushar* > *Team Leader(Technology),* > *Signos Software Solutions Pvt. Ltd.* > *Ground Floor **A.R Plaza, TC 11/43 (2),* > *P.M.G Junction,* > *Thiruvananthapuram, 695004. Kerala, India.* > > *Web: www.signossolutions.com <http://www.signossolutions.com>* > Email: thushar.gr(a)signossolutions.com, thushar.gr(a)gmail.com > Phone: +919846577772 > > > > > > On Fri, May 2, 2014 at 5:03 PM, phil(a)highoctane.be <phil(a)highoctane.be>wrote: > >> Pharo lacks a SOAP stack. >> >> This is something that also limits it in environments where a ton of APIs >> are in SOAP format. E.g. Banks, Insurance, Media, Government (including >> European Institutions). >> For SaaS apps, who cares. >> >> Java and .NET have full stacks and that's a significant factor for their >> use. >> VisualWorks support those: as in: >> >> http://www.cincomsmalltalk.com/main/products/visualworks/ >> >> - *Major improvements to WSDL 2.0 / SOAP 1.2 to handle updated >> protocols.* >> >> FWIW, my approach is to have a Java endpoint that will pass stuff back >> and forth through RabbitMQ or whatever middleware. >> >> When you get into SOAP over JMS, with JMS being WebsphereMQ for example, >> well, things get complicated, especially when you factor in certificates. >> And sometimes you need compliance and certification. >> >> IBM has a product to help solve those things: >> http://www-03.ibm.com/software/products/en/datapower. >> I led a team that used it extensively for a couple of months. It works >> well. The price tag is quite hard to swallow for little systems and >> companies. >> >> <featurelist> >> >> "The IBMÂ® WebSphereÂ® DataPowerÂ® Service Gateway XG45 appliance helps you >> secure and govern web traffic more effectively. It provides an advanced >> data threat reduction and security enforcement layer for web and >> on-premises applications, while giving you the flexibility to deploy new >> applications rapidly. >> >> The IBM WebSphere DataPower Service Gateway XG45 appliance helps you: >> >> - Strengthen compliance using robust data protection, policy >> enforcement and auditing capabilities >> - Gain âfront-line defenseâ for inbound and outbound traffic through >> a web 2.0 gateway. >> - Separate security concerns from application code with an optional >> hardware security module (HSM) that is certified for FIPS 140-2 Level 3. >> - Integrate applications for improved application and database >> connectivity." >> >> </featurelist> >> >> If you have something around, you can bridge SOAP to whatever, including >> REST. The new versions do support JSON etc as well. >> >> >> Phil >> >> >> >> On Fri, May 2, 2014 at 12:26 PM, S Krish < >> krishnamachari.sudhakar(a)gmail.com> wrote: >> >>> Are you looking for a SOAP client for RPC style calls or document format. >>> >>> For the former adding a simple SOAP Envelope to the request and using >>> ZnClient should work fairly well. >>> >>> But if you are looking for something like : >>> http://www.soapclient.com/soaptest.html to be used against a declared >>> WSDL.. I doubt if any exists. >>> >>> Look at the XMLRPC package and see if you can work from there.. if you >>> need to adapt something.. >>> >>> >>> On Fri, May 2, 2014 at 3:29 PM, Thushar G R <thushar.gr(a)gmail.com>wrote: >>> >>>> Hi, >>>> >>>> Do we have a SOAP client in pharo? I checked SoapOpera but seems its >>>> too old to work with latest pharo 2.0. >>>> >>>> Thanks, >>>> >>>> >>> >> >

May 2, 2014

Re: [Pharo-users] Updating packages from command line

by Bernat Romagosa

I see, thanks a lot! :) 2014-05-02 13:45 GMT+02:00 Sven Van Caekenberghe <sven(a)stfx.eu>: > The best approach is to use Configurations and the config handler: > > $ ./pharo Pharo.image config > Command line handler for dealing with Metacello configurations from the > command line > > Usage: config [--help] <repository url> [<configuration>] > [--install[=<version>]] [--group=<group>] [--username=<username>] > [--password=<password>] > --help show this help message > <repository url> A Monticello repository name > <configuration> A valid Metacello Configuration name > <version> A valid version for the given configuration > <group> A valid Metacello group name > <username> An optional username to access the > configuration's repository > <password> An optional password to access the > configuration's repository > > Examples: > # display this help message > pharo Pharo.image config > > # list all configurations of a repository > pharo Pharo.image config $MC_REPOS_URL > > # list all the available versions of a confgurtation > pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo > > # install the stable version > pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo --install > > #install a specific version '1.5' > pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo > --install=1.5 > > #install a specific version '1.5' and only a specific group 'Tests' > pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo > --install=1.5 --group=Tests > > The following article contains this approach as well: > > http://zn.stfx.eu/zn/build-and-deploy-1st-webapp/ > > http://zn.stfx.eu/zn/build-and-deploy-1st-webapp/#deployingforproduction > > HTH, > > Sven > > On 02 May 2014, at 13:28, Bernat Romagosa <tibabenfortlapalanca(a)gmail.com> > wrote: > > > Is there a way to do it? > > > > Here's my attempt: > > > > pharo-vm-nox MyImage.image eval "Gofer new smalltalkhubUser: 'myUser' > project: 'MyProject'; package: 'MyPackage'; load. Smalltalk snapshot: true > andQuit: true" > > > > then: > > > > pharo-vm-nox MyImage.image eval --no-quit "MyJustLoadedClass start" > > > > results in: > > > > UndefinedObject>>DoIt (MyJustLoadedClass is Undeclared) > > MessageNotUnderstood: receiver of "start" is nil > > > > Thanks! > > Bernat. > > > > -- > > Bernat Romagosa. > > > -- Bernat Romagosa.

May 2, 2014

Re: [Pharo-users] Updating packages from command line

by Sven Van Caekenberghe

The best approach is to use Configurations and the config handler: $ ./pharo Pharo.image config Command line handler for dealing with Metacello configurations from the command line Usage: config [--help] <repository url> [<configuration>] [--install[=<version>]] [--group=<group>] [--username=<username>] [--password=<password>] --help show this help message <repository url> A Monticello repository name <configuration> A valid Metacello Configuration name <version> A valid version for the given configuration <group> A valid Metacello group name <username> An optional username to access the configuration's repository <password> An optional password to access the configuration's repository Examples: # display this help message pharo Pharo.image config # list all configurations of a repository pharo Pharo.image config $MC_REPOS_URL # list all the available versions of a confgurtation pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo # install the stable version pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo --install #install a specific version '1.5' pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo --install=1.5 #install a specific version '1.5' and only a specific group 'Tests' pharo Pharo.image config $MC_REPOS_URL ConfigurationOfFoo --install=1.5 --group=Tests The following article contains this approach as well: http://zn.stfx.eu/zn/build-and-deploy-1st-webapp/ http://zn.stfx.eu/zn/build-and-deploy-1st-webapp/#deployingforproduction HTH, Sven On 02 May 2014, at 13:28, Bernat Romagosa <tibabenfortlapalanca(a)gmail.com> wrote: > Is there a way to do it? > > Here's my attempt: > > pharo-vm-nox MyImage.image eval "Gofer new smalltalkhubUser: 'myUser' project: 'MyProject'; package: 'MyPackage'; load. Smalltalk snapshot: true andQuit: true" > > then: > > pharo-vm-nox MyImage.image eval --no-quit "MyJustLoadedClass start" > > results in: > > UndefinedObject>>DoIt (MyJustLoadedClass is Undeclared) > MessageNotUnderstood: receiver of "start" is nil > > Thanks! > Bernat. > > -- > Bernat Romagosa.

May 2, 2014

Re: [Pharo-users] SOAP in Pharo

by Thushar G R

Hi, XMLRPC may not be enough. I have tried some of the request using the XMLRPC and it works but i am not sure if its enough for managing all the requests. I am trying to connect to a magento site. and their recommended approach is unfortunately soap. SoapOpera updating is a possibility it seems, am i right? Also any paid paid solution is not practical for us at the momment. Also i hope the SoapOpera is latest at squeakSource and that it was last updated in 2010. thanks for the replies Thushar *G R Thushar* *Team Leader(Technology),* *Signos Software Solutions Pvt. Ltd.* *Ground Floor **A.R Plaza, TC 11/43 (2),* *P.M.G Junction,* *Thiruvananthapuram, 695004. Kerala, India.* *Web: www.signossolutions.com <http://www.signossolutions.com>* Email: thushar.gr(a)signossolutions.com, thushar.gr(a)gmail.com Phone: +919846577772 On Fri, May 2, 2014 at 5:03 PM, phil(a)highoctane.be <phil(a)highoctane.be>wrote: > Pharo lacks a SOAP stack. > > This is something that also limits it in environments where a ton of APIs > are in SOAP format. E.g. Banks, Insurance, Media, Government (including > European Institutions). > For SaaS apps, who cares. > > Java and .NET have full stacks and that's a significant factor for their > use. > VisualWorks support those: as in: > > http://www.cincomsmalltalk.com/main/products/visualworks/ > > - *Major improvements to WSDL 2.0 / SOAP 1.2 to handle updated > protocols.* > > FWIW, my approach is to have a Java endpoint that will pass stuff back and > forth through RabbitMQ or whatever middleware. > > When you get into SOAP over JMS, with JMS being WebsphereMQ for example, > well, things get complicated, especially when you factor in certificates. > And sometimes you need compliance and certification. > > IBM has a product to help solve those things: > http://www-03.ibm.com/software/products/en/datapower. > I led a team that used it extensively for a couple of months. It works > well. The price tag is quite hard to swallow for little systems and > companies. > > <featurelist> > > "The IBMÂ® WebSphereÂ® DataPowerÂ® Service Gateway XG45 appliance helps you > secure and govern web traffic more effectively. It provides an advanced > data threat reduction and security enforcement layer for web and > on-premises applications, while giving you the flexibility to deploy new > applications rapidly. > > The IBM WebSphere DataPower Service Gateway XG45 appliance helps you: > > - Strengthen compliance using robust data protection, policy > enforcement and auditing capabilities > - Gain âfront-line defenseâ for inbound and outbound traffic through a > web 2.0 gateway. > - Separate security concerns from application code with an optional > hardware security module (HSM) that is certified for FIPS 140-2 Level 3. > - Integrate applications for improved application and database > connectivity." > > </featurelist> > > If you have something around, you can bridge SOAP to whatever, including > REST. The new versions do support JSON etc as well. > > > Phil > > > > On Fri, May 2, 2014 at 12:26 PM, S Krish < > krishnamachari.sudhakar(a)gmail.com> wrote: > >> Are you looking for a SOAP client for RPC style calls or document format. >> >> For the former adding a simple SOAP Envelope to the request and using >> ZnClient should work fairly well. >> >> But if you are looking for something like : >> http://www.soapclient.com/soaptest.html to be used against a declared >> WSDL.. I doubt if any exists. >> >> Look at the XMLRPC package and see if you can work from there.. if you >> need to adapt something.. >> >> >> On Fri, May 2, 2014 at 3:29 PM, Thushar G R <thushar.gr(a)gmail.com> wrote: >> >>> Hi, >>> >>> Do we have a SOAP client in pharo? I checked SoapOpera but seems its too >>> old to work with latest pharo 2.0. >>> >>> Thanks, >>> >>> >> >

May 2, 2014

Re: [Pharo-users] Updating packages from command line

by GOUBIER Thierry

What I use is eval --save: pharo-vm-nox MyImage.image eval --save "Gofer new smalltalkhubUser: 'myUser' project: 'MyProject'; package: 'MyPackage'; load Thierry ________________________________ De : Pharo-users [pharo-users-bounces(a)lists.pharo.org] de la part de Bernat Romagosa [tibabenfortlapalanca(a)gmail.com] EnvoyÃ© : vendredi 2 mai 2014 13:28 Ã : Any question about pharo is welcome Objet : [Pharo-users] Updating packages from command line Is there a way to do it? Here's my attempt: pharo-vm-nox MyImage.image eval "Gofer new smalltalkhubUser: 'myUser' project: 'MyProject'; package: 'MyPackage'; load. Smalltalk snapshot: true andQuit: true" then: pharo-vm-nox MyImage.image eval --no-quit "MyJustLoadedClass start" results in: UndefinedObject>>DoIt (MyJustLoadedClass is Undeclared) MessageNotUnderstood: receiver of "start" is nil Thanks! Bernat. -- Bernat Romagosa.

May 2, 2014