May 2014 - Pharo-users - lists.pharo.org

Re: [Pharo-users] XMLOrderedList Concantenation

by Carlo

Hi The problem seems to be due to the use of an internal collection class of OrderedCollection which has restrictions on use of #at:put:. This means that certain methods will have to delegate to the internal collection class to be âsafeâ; in this scenario it is the XMLOrderedList >>copyReplaceFrom:to:with: I donât have write access to the http://www.smalltalkhub.com/#!/~PharoExtras/XMLParser/ project but here is a unit test and code change that seems to work. Cheers Carlo XMLOrderedListTest>>testConcatenation | anXmlOrderedList expectedConcatenationResult | expectedConcatenationResult := XMLOrderedList new add: '1'; yourself. self shouldnt: [ anXmlOrderedList := expectedConcatenationResult , XMLOrderedList new ] raise: SubscriptOutOfBounds description: 'Expect that concatenation does not fail even though internal collection class of XMLOrderedList is an OrderedCollection. See comment for XMLOrderedList>>copyReplaceFrom:to:with:'. self assert: anXmlOrderedList equals: expectedConcatenationResult. XMLOrderedList >>copyReplaceFrom: start to: stop with: replacementCollection "Delegate to my internal collection class as it may restrict copying and replacing. See comment for OrderedCollection>>copyReplaceFrom:to:with: and OrderedCollection>>at:put:" ^ self collection copyReplaceFrom: start to: stop with: replacementCollection On 05 May 2014, at 7:13 PM, Ben Coman <btc(a)openInWorld.com> wrote: Thanks. That info made it much easier to try. Sorry I didn't end up with an answer for you, but I confirm there is some issue here, or something new I can learn when other chip in. Here is what I tried. * Installed XMLParser (monty.58) from Configuration Browser in Pharo 3. * Ran your code. Got the same error. * From the call stack I observed that XMLOrderedCollection(SequenceableCollection)>>copyReplaceFrom:to:with: has the line "newSequenceableCollection := self species new: newSize." such that it seems your error might be reduced to the question of why the following two snippets fail: d := OrderedCollection new: 1. d at: 1 put: 1. e := OrderedCollection new: 3. e at: 2 put: 1. However I'm sorry that is beyond my knowledge, and I'm hoping someone else can chip in so I can learn something. Pushing on, I noticed that XMLOrderedList has an instance variable /collection/ which holds the OrderedCollection. Now I wonder (without great experience and hoping to learn something) if it smells funny that XMLOrderedList inherits all of SequencableCollection methods that can not operate on /collection/. I noticed that XMLOrderedList was using an inherited SequenceableCollection>>copyReplaceFrom:to:with while OrderedCollection overrode that method with its own. So taking inspiration XMLOrderedList>>copyFrom:to: to override SequencableCollection>>copyReplaceFrom:to:with: to work with /collection/ seems to solve your problem: XMLOrderedList>>copyReplaceFrom: start to: stop with: replacementCollection ^ self newWithCollection: (collection copyReplaceFrom: start to: stop with: replacementCollection ) Along the way I noticed a few (possible) bugs that seems not related to your problem: * When stepping through XMLOrderedList>>setCollection: there is a red-box-of-death for the instance variables, which can be solved by defining the following. XMLOrderedList>>size ^ collection ifNil: [ 0 ] ifNotNil: [ collection size] * In the debugger the /collection/ instance variable is not shown! (e.g. line XMLOrderedList>>at:put:). Can someone confirm this should show? HTH cheers -ben Thushar G R wrote: > > XMLOrderedList belongs to package XML-Parser-Nodes. > > a := XMLOrderedList new. > a add:'1'. > a , XMLOrderedList new. > > Here select all and Do it. On line 3 (a , XMLOrderedList new.) i am expected to get a copy of 'a' , but instead it throws an error SubscriptOutOfBounds. > > > > > OrderedCollection(Object)>>errorSubscriptBounds: > OrderedCollection>>ensureBoundsFrom:to: > OrderedCollection>>at:put: > OrderedCollection(SequenceableCollection)>>replaceFrom:to:with:startingAt: > XMLOrderedList>>replaceFrom:to:with:startingAt: > XMLOrderedList(SequenceableCollection)>>copyReplaceFrom:to:with: > XMLOrderedList(SequenceableCollection)>>, > UndefinedObject>>DoIt > OpalCompiler>>evaluate > SmalltalkEditor>>evaluateSelectionAndDo: > PluggableTextMorph>>inspectIt in Block: [ textMorph editor evaluateSelectionAndDo: [ :resu...etc... > PluggableTextMorph>>handleEdit: in Block: [ result := editBlock value ] > TextMorphForEditView(TextMorph)>>handleEdit: > PluggableTextMorph>>handleEdit: > PluggableTextMorph>>inspectIt > SmalltalkEditor class>>buildSmalltalkEditorKeymappingsOn: in Block: [ :morph | morph inspectIt ] > BlockClosure>>cull: > BlockClosure>>cull:cull: > BlockClosure>>cull:cull:cull: > KMCategoryBinding>>completeMatch:buffer: > KMKeymap>>notifyCompleteMatchTo:buffer: in Block: [ :l | l completeMatch: self buffer: aBuffer ] > Array(SequenceableCollection)>>do: > KMKeymap>>notifyCompleteMatchTo:buffer: > KMKeymap>>onMatchWith:notify:andDo: > KMCategory>>onMatchWith:notify:andDo: in Block: [ :entry | entry onMatchWith: anEventBuffer notify...etc... > Set>>do: > KMCategory>>onMatchWith:notify:andDo: > KMCategoryBinding>>verifyMatchWith:notifying:thenDoing: > KMDispatcher>>dispatch: in Block: [ :aTarget | ... > OrderedCollection>>do: > > > Plese refer to the above stack. > > Thanks in advance. > > thushar > > > On Mon, May 5, 2014 at 6:28 PM, Ben Coman <btc(a)openinworld.com> wrote: > Thushar G R wrote: > Hi, > > I am getting an error while doing this. > > a := XMLOrderedList new. > a add:'1'. > a , XMLOrderedList new. > > Thanks, > > Thushar > I could give you "an answer" ;) - but it would be what you wanted. It would help if you told what the error was, where it occurs (which of the three lines), and what you expect each line is doing (especially the third line). > > Also I don't see XMLOrderedList in the default Pharo image, so it would help if you describe where you got that from and how you installed it. > > cheers -ben > >

May 5, 2014

Spec Tabs : how to remove proramatically a tab ?

by Glenn CavarlÃ©

Hi, I try to use Tabs with Spec and i would like to remove a tab from the TabManagerModel but it doesn't work. TabManagerModel has a method named #removeTab: which call directly its adapter but the MorphicTabManagerAdapter hasn't the method #removeTab: ... I looked at the TabManager class and its the same, no method to remove a tab. A small example I would like to do : The only solution (or rather a hack) i found it's to add an extension like that: anyone have a clue to do that nicer? And other mistery, why the tabBar is removed when the last tab is closed ? If someone can enlighten me. Regards, ----- Glenn CavarlÃ© -- View this message in context: http://forum.world.st/Spec-Tabs-how-to-remove-proramatically-a-tab-tp475800… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

May 5, 2014

Re: [Pharo-users] XMLOrderedList Concantenation

by Sven Van Caekenberghe

The EyeCollectionInspector show the 'collection view' (what enumeration does), the EyeBasicInspector shows the actual instance variables as well as the variable part (and thus allows a look inside). That is why there are multiple views. On 05 May 2014, at 23:50, Nicolai Hess <nicolaihess(a)web.de> wrote: > 2014-05-05 19:13 GMT+02:00 Ben Coman <btc(a)openinworld.com>: > > Thanks. That info made it much easier to try. Sorry I didn't end up with an answer for you, but I confirm there is some issue here, or something new I can learn when other chip in. > > Here is what I tried. > > * Installed XMLParser (monty.58) from Configuration Browser in Pharo 3. > > * Ran your code. Got the same error. > > * From the call stack I observed that XMLOrderedCollection(SequenceableCollection)>>copyReplaceFrom:to:with: > has the line "newSequenceableCollection := self species new: newSize." such that it seems your error might be reduced to the question of why the following two snippets fail: > d := OrderedCollection new: 1. > d at: 1 put: 1. > > e := OrderedCollection new: 3. > e at: 2 put: 1. > > However I'm sorry that is beyond my knowledge, and I'm hoping someone else can chip in so I can learn something. > > Pushing on, I noticed that XMLOrderedList has an instance variable /collection/ which holds the OrderedCollection. > > Now I wonder (without great experience and hoping to learn something) if it smells funny that XMLOrderedList inherits all of SequencableCollection methods that can not operate on /collection/. > > I noticed that XMLOrderedList was using an inherited SequenceableCollection>>copyReplaceFrom:to:with > while OrderedCollection overrode that method with its own. So taking inspiration XMLOrderedList>>copyFrom:to: to override SequencableCollection>>copyReplaceFrom:to:with: to work with /collection/ > seems to solve your problem: > XMLOrderedList>>copyReplaceFrom: start to: stop with: replacementCollection > ^ self newWithCollection: > (collection copyReplaceFrom: start to: stop with: replacementCollection ) > > > Along the way I noticed a few (possible) bugs that seems not related to your problem: > > * When stepping through XMLOrderedList>>setCollection: > there is a red-box-of-death for the instance variables, which can be solved by defining the following. > XMLOrderedList>>size > ^ collection ifNil: [ 0 ] ifNotNil: [ collection size] > > * In the debugger the /collection/ instance variable is not shown! (e.g. line XMLOrderedList>>at:put:). > Can someone confirm this should show? > > > I think this is the default Collection inspector (EyeCollectionInspector). Debugging > a OrderedCollection behaves the same, the debugger does not show the array and index > instvars. > > nicolai > > > > HTH > cheers -ben > > Thushar G R wrote: >> XMLOrderedList belongs to package XML-Parser-Nodes. >> >> a := XMLOrderedList new. >> a add:'1'. >> a , XMLOrderedList new. >> >> Here select all and Do it. On line 3 (a , XMLOrderedList new.) i am expected to get a copy of 'a' , but instead it throws an error SubscriptOutOfBounds. >> >> >> >> >> OrderedCollection(Object)>>errorSubscriptBounds: >> OrderedCollection>>ensureBoundsFrom:to: >> OrderedCollection>>at:put: >> OrderedCollection(SequenceableCollection)>>replaceFrom:to:with:startingAt: >> XMLOrderedList>>replaceFrom:to:with:startingAt: >> XMLOrderedList(SequenceableCollection)>>copyReplaceFrom:to:with: >> XMLOrderedList(SequenceableCollection)>>, >> UndefinedObject>>DoIt >> OpalCompiler>>evaluate >> SmalltalkEditor>>evaluateSelectionAndDo: >> PluggableTextMorph>>inspectIt in Block: [ textMorph editor evaluateSelectionAndDo: [ :resu...etc... >> PluggableTextMorph>>handleEdit: in Block: [ result := editBlock value ] >> TextMorphForEditView(TextMorph)>>handleEdit: >> PluggableTextMorph>>handleEdit: >> PluggableTextMorph>>inspectIt >> SmalltalkEditor class>>buildSmalltalkEditorKeymappingsOn: in Block: [ :morph | morph inspectIt ] >> BlockClosure>>cull: >> BlockClosure>>cull:cull: >> BlockClosure>>cull:cull:cull: >> KMCategoryBinding>>completeMatch:buffer: >> KMKeymap>>notifyCompleteMatchTo:buffer: in Block: [ :l | l completeMatch: self buffer: aBuffer ] >> Array(SequenceableCollection)>>do: >> KMKeymap>>notifyCompleteMatchTo:buffer: >> KMKeymap>>onMatchWith:notify:andDo: >> KMCategory>>onMatchWith:notify:andDo: in Block: [ :entry | entry onMatchWith: anEventBuffer notify...etc... >> Set>>do: >> KMCategory>>onMatchWith:notify:andDo: >> KMCategoryBinding>>verifyMatchWith:notifying:thenDoing: >> KMDispatcher>>dispatch: in Block: [ :aTarget | ... >> OrderedCollection>>do: >> >> >> Plese refer to the above stack. >> >> Thanks in advance. >> >> thushar >> >> >> On Mon, May 5, 2014 at 6:28 PM, Ben Coman <btc(a)openinworld.com> wrote: >> Thushar G R wrote: >> Hi, >> >> I am getting an error while doing this. >> >> a := XMLOrderedList new. >> a add:'1'. >> a , XMLOrderedList new. >> >> Thanks, >> >> Thushar >> I could give you "an answer" ;) - but it would be what you wanted. It would help if you told what the error was, where it occurs (which of the three lines), and what you expect each line is doing (especially the third line). >> >> Also I don't see XMLOrderedList in the default Pharo image, so it would help if you describe where you got that from and how you installed it. >> >> cheers -ben

May 5, 2014

Re: [Pharo-users] XMLOrderedList Concantenation

by Nicolai Hess

2014-05-05 19:13 GMT+02:00 Ben Coman <btc(a)openinworld.com>: > > Thanks. That info made it much easier to try. Sorry I didn't end up with > an answer for you, but I confirm there is some issue here, or something new > I can learn when other chip in. > > Here is what I tried. > > * Installed XMLParser (monty.58) from Configuration Browser in Pharo 3. > > * Ran your code. Got the same error. > > * From the call stack I observed that > XMLOrderedCollection(SequenceableCollection)>>copyReplaceFrom:to:with: > has the line "newSequenceableCollection := self species new: newSize." > such that it seems your error might be reduced to the question of why the > following two snippets fail: > d := OrderedCollection new: 1. > d at: 1 put: 1. > > e := OrderedCollection new: 3. > e at: 2 put: 1. > > However I'm sorry that is beyond my knowledge, and I'm hoping someone else > can chip in so I can learn something. > > Pushing on, I noticed that XMLOrderedList has an instance variable > /collection/ which holds the OrderedCollection. > > Now I wonder (without great experience and hoping to learn something) if > it smells funny that XMLOrderedList inherits all of SequencableCollection > methods that can not operate on /collection/. > > I noticed that XMLOrderedList was using an inherited > SequenceableCollection>>copyReplaceFrom:to:with > while OrderedCollection overrode that method with its own. So taking > inspiration XMLOrderedList>>copyFrom:to: to override > SequencableCollection>>copyReplaceFrom:to:with: to work with /collection/ > seems to solve your problem: > XMLOrderedList>>copyReplaceFrom: start to: stop with: > replacementCollection > ^ self newWithCollection: > (collection copyReplaceFrom: start to: stop with: > replacementCollection ) > > > Along the way I noticed a few (possible) bugs that seems not related to > your problem: > > * When stepping through XMLOrderedList>>setCollection: > there is a red-box-of-death for the instance variables, which can be > solved by defining the following. > XMLOrderedList>>size > ^ collection ifNil: [ 0 ] ifNotNil: [ collection size] > > * In the debugger the /collection/ instance variable is not shown! (e.g. > line XMLOrderedList>>at:put:). > Can someone confirm this should show? > I think this is the default Collection inspector (EyeCollectionInspector). Debugging a OrderedCollection behaves the same, the debugger does not show the array and index instvars. nicolai > HTH > cheers -ben > > Thushar G R wrote: > > XMLOrderedList belongs to package XML-Parser-Nodes. > > a := XMLOrderedList new. > a add:'1'. > a , XMLOrderedList new. > > Here select all and Do it. On line 3 (a , XMLOrderedList new.) i am > expected to get a copy of 'a' , but instead it throws an error > SubscriptOutOfBounds. > > > > > OrderedCollection(Object)>>errorSubscriptBounds: > OrderedCollection>>ensureBoundsFrom:to: > OrderedCollection>>at:put: > OrderedCollection(SequenceableCollection)>>replaceFrom:to:with:startingAt: > XMLOrderedList>>replaceFrom:to:with:startingAt: > XMLOrderedList(SequenceableCollection)>>copyReplaceFrom:to:with: > XMLOrderedList(SequenceableCollection)>>, > UndefinedObject>>DoIt > OpalCompiler>>evaluate > SmalltalkEditor>>evaluateSelectionAndDo: > PluggableTextMorph>>inspectIt in Block: [ textMorph editor > evaluateSelectionAndDo: [ :resu...etc... > PluggableTextMorph>>handleEdit: in Block: [ result := editBlock value ] > TextMorphForEditView(TextMorph)>>handleEdit: > PluggableTextMorph>>handleEdit: > PluggableTextMorph>>inspectIt > SmalltalkEditor class>>buildSmalltalkEditorKeymappingsOn: in Block: [ > :morph | morph inspectIt ] > BlockClosure>>cull: > BlockClosure>>cull:cull: > BlockClosure>>cull:cull:cull: > KMCategoryBinding>>completeMatch:buffer: > KMKeymap>>notifyCompleteMatchTo:buffer: in Block: [ :l | l completeMatch: > self buffer: aBuffer ] > Array(SequenceableCollection)>>do: > KMKeymap>>notifyCompleteMatchTo:buffer: > KMKeymap>>onMatchWith:notify:andDo: > KMCategory>>onMatchWith:notify:andDo: in Block: [ :entry | entry > onMatchWith: anEventBuffer notify...etc... > Set>>do: > KMCategory>>onMatchWith:notify:andDo: > KMCategoryBinding>>verifyMatchWith:notifying:thenDoing: > KMDispatcher>>dispatch: in Block: [ :aTarget | ... > OrderedCollection>>do: > > > Plese refer to the above stack. > > Thanks in advance. > > thushar > > > On Mon, May 5, 2014 at 6:28 PM, Ben Coman <btc(a)openinworld.com> wrote: > >> Thushar G R wrote: >> >>> Hi, >>> >>> I am getting an error while doing this. >>> >>> a := XMLOrderedList new. >>> a add:'1'. >>> a , XMLOrderedList new. >>> >>> Thanks, >>> >>> Thushar >>> >> I could give you "an answer" ;) - but it would be what you wanted. It >> would help if you told what the error was, where it occurs (which of the >> three lines), and what you expect each line is doing (especially the third >> line). >> >> Also I don't see XMLOrderedList in the default Pharo image, so it would >> help if you describe where you got that from and how you installed it. >> >> cheers -ben >> >> > >

May 5, 2014

Re: [Pharo-users] compiling Pillar files locally (for LaserGame book)

by pharo4Stef＠free.fr

> Is TEXLive required for the PDF compilation? > Maybe the setup I reported [1] for PBE1 on Windows would be similar? > However I now have access to a Mavericks machine. Would that be a > better option? What tools would you use to edit with ? (this is my > first Mac - something to google for would be useful) I used either texmate or emacs (damien did a mode for pillar). But do not bother too much if you edit and break ping me and I will fix problems. Stef > > I see that [2] runs ./download.sh > so perhaps that is all that is required in this case for the LaserGame > book? > > [1] http://blog.openinworld.com/2012/05/contributing-to-pbe/ regarding > [2] > https://ci.inria.fr/pharo-contribution/job/PharoLaserGame/lastSuccessfulBui… > > cheers -ben > > >

May 5, 2014

Re: [Pharo-users] No sources files on http://pharo.org/download

by Sven Van Caekenberghe

I was referring to the zero-config one: $ curl get.pharo.org/vm | bash [...] $ ls pharo-vm Pharo.app PharoV20.sources __MACOSX PharoV10.sources PharoV30.sources But they should be in the other ones as well. On 05 May 2014, at 20:28, Johan Fabry <jfabry(a)dcc.uchile.cl> wrote: > > About the VM download including the sources, thatâs apparently not the case. The mac vm download yields only an .app file and dragging an image to the .app pops up the no sources notification. (Pharo cannot locate the sources file named /Users/jfabry/Research/Pharo/Pharo-3.0/Pharo-Image-3.0-latest/PharoV30.sources.) > > On May 5, 2014, at 1:04 PM, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: > >> In http://files.pharo.org/sources/ you can find >> >> http://files.pharo.org/sources/PharoV30.sources >> http://files.pharo.org/sources/PharoV30.sources.zip >> >> And if you use a very recent VM you get them for free ;-) >> >> On 05 May 2014, at 18:49, Johan Fabry <jfabry(a)dcc.uchile.cl> wrote: >> >>> Hi all, >>> >>> looking at the http://pharo.org/download page, I do not find a download link for the sources. Thereâs the one-click, the image, and the vmâs but not a link to the sources. Similiarly, in http://files.pharo.org or http://files.pharo.org/image/ I cannot find the sources. >>> >>> >>> ---> Save our in-boxes! http://emailcharter.org <--- >>> >>> Johan Fabry - http://pleiad.cl/~jfabry >>> PLEIAD lab - Computer Science Department (DCC) - University of Chile >>> >>> >> >> >> > > > > ---> Save our in-boxes! http://emailcharter.org <--- > > Johan Fabry - http://pleiad.cl/~jfabry > PLEIAD lab - Computer Science Department (DCC) - University of Chile > >

May 5, 2014

Re: [Pharo-users] No sources files on http://pharo.org/download

by Sergi Reyner

Use the setting, Luke? That works for me. Cheers, Sergi 2014-05-05 19:28 GMT+01:00 Johan Fabry <jfabry(a)dcc.uchile.cl>: > > About the VM download including the sources, thatâs apparently not the > case. The mac vm download yields only an .app file and dragging an image to > the .app pops up the no sources notification. (Pharo cannot locate the > sources file named > /Users/jfabry/Research/Pharo/Pharo-3.0/Pharo-Image-3.0-latest/PharoV30.sources.) > > On May 5, 2014, at 1:04 PM, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: > > > In http://files.pharo.org/sources/ you can find > > > > http://files.pharo.org/sources/PharoV30.sources > > http://files.pharo.org/sources/PharoV30.sources.zip > > > > And if you use a very recent VM you get them for free ;-) > > > > On 05 May 2014, at 18:49, Johan Fabry <jfabry(a)dcc.uchile.cl> wrote: > > > >> Hi all, > >> > >> looking at the http://pharo.org/download page, I do not find a > download link for the sources. Thereâs the one-click, the image, and the > vmâs but not a link to the sources. Similiarly, in http://files.pharo.orgor > http://files.pharo.org/image/ I cannot find the sources. > >> > >> > >> ---> Save our in-boxes! http://emailcharter.org <--- > >> > >> Johan Fabry - http://pleiad.cl/~jfabry > >> PLEIAD lab - Computer Science Department (DCC) - University of Chile > >> > >> > > > > > > > > > > ---> Save our in-boxes! http://emailcharter.org <--- > > Johan Fabry - http://pleiad.cl/~jfabry > PLEIAD lab - Computer Science Department (DCC) - University of Chile > > >

May 5, 2014

Re: [Pharo-users] No sources files on http://pharo.org/download

by Johan Fabry

About the VM download including the sources, thatâs apparently not the case. The mac vm download yields only an .app file and dragging an image to the .app pops up the no sources notification. (Pharo cannot locate the sources file named /Users/jfabry/Research/Pharo/Pharo-3.0/Pharo-Image-3.0-latest/PharoV30.sources.) On May 5, 2014, at 1:04 PM, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: > In http://files.pharo.org/sources/ you can find > > http://files.pharo.org/sources/PharoV30.sources > http://files.pharo.org/sources/PharoV30.sources.zip > > And if you use a very recent VM you get them for free ;-) > > On 05 May 2014, at 18:49, Johan Fabry <jfabry(a)dcc.uchile.cl> wrote: > >> Hi all, >> >> looking at the http://pharo.org/download page, I do not find a download link for the sources. Thereâs the one-click, the image, and the vmâs but not a link to the sources. Similiarly, in http://files.pharo.org or http://files.pharo.org/image/ I cannot find the sources. >> >> >> ---> Save our in-boxes! http://emailcharter.org <--- >> >> Johan Fabry - http://pleiad.cl/~jfabry >> PLEIAD lab - Computer Science Department (DCC) - University of Chile >> >> > > > ---> Save our in-boxes! http://emailcharter.org <--- Johan Fabry - http://pleiad.cl/~jfabry PLEIAD lab - Computer Science Department (DCC) - University of Chile

May 5, 2014

Re: [Pharo-users] No sources files on http://pharo.org/download

by Johan Fabry

Ok thanks! Maybe it would be worthwhile to point that out on the webpage ... On May 5, 2014, at 1:04 PM, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: > In http://files.pharo.org/sources/ you can find > > http://files.pharo.org/sources/PharoV30.sources > http://files.pharo.org/sources/PharoV30.sources.zip > > And if you use a very recent VM you get them for free ;-) > > On 05 May 2014, at 18:49, Johan Fabry <jfabry(a)dcc.uchile.cl> wrote: > >> Hi all, >> >> looking at the http://pharo.org/download page, I do not find a download link for the sources. Thereâs the one-click, the image, and the vmâs but not a link to the sources. Similiarly, in http://files.pharo.org or http://files.pharo.org/image/ I cannot find the sources. >> >> >> ---> Save our in-boxes! http://emailcharter.org <--- >> >> Johan Fabry - http://pleiad.cl/~jfabry >> PLEIAD lab - Computer Science Department (DCC) - University of Chile >> >> > > > ---> Save our in-boxes! http://emailcharter.org <--- Johan Fabry - http://pleiad.cl/~jfabry PLEIAD lab - Computer Science Department (DCC) - University of Chile

May 5, 2014

Re: [Pharo-users] compiling Pillar files locally (for LaserGame book)

by Ignacio Sniechowski

Ben, 1) Yes, it is possible. You could check the compile.sh script that is in the PharoForTheEnterprise repository in GitHub. It does exactly that. 2) Yes you have to have TEXLive installed. 3) If you install it on Mavericks check the paths. TexLive now install into a weird location and you should add that location to your path or else you'll get an error. 4) To edit pillar text I use TextMate with Uko's bundle. best Nacho *Lic. Ignacio Sniechowski, MBA* On Mon, May 5, 2014 at 2:42 PM, Ben Coman <btc(a)openinworld.com> wrote: > > I've haven't been able to find any instructions on how to compile Pillar > files locally. Any pointers? > Is TEXLive required for the PDF compilation? > Maybe the setup I reported [1] for PBE1 on Windows would be similar? > However I now have access to a Mavericks machine. Would that be a better > option? What tools would you use to edit with ? (this is my first Mac - > something to google for would be useful) > > I see that [2] runs ./download.sh > so perhaps that is all that is required in this case for the LaserGame > book? > > [1] http://blog.openinworld.com/2012/05/contributing-to-pbe/ regarding > [2] https://ci.inria.fr/pharo-contribution/job/PharoLaserGame/ > lastSuccessfulBuild/console > > cheers -ben > > >

May 5, 2014