November 2014 - Pharo-users

Re: [Pharo-users] Alternate browser

by Thierry Goubier

Hi Craig, tell me how it goes for you. Things you like in it, things you don't. If you need a bit of a Thierry 2014-11-27 9:31 GMT+01:00 Craig <craig(a)hivemind.net>: > Thanks Sven, > > Never mind. I just installed the September 25 VM and AltBrowser now works > just fine :) > > Craig > > -----Original Message----- > From: Craig [mailto:craig@hivemind.net] > Sent: 27 November 2014 10:11 AM > To: 'Any question about pharo is welcome' > Subject: RE: [Pharo-users] Alternate browser > > Hi Sven, > > My VM is Cog VM 4.0.0 (release) > > Craig > > -----Original Message----- > From: Pharo-users [mailto:pharo-users-bounces@lists.pharo.org] On Behalf > Of Sven Van Caekenberghe > Sent: 27 November 2014 10:06 AM > To: Any question about pharo is welcome > Subject: Re: [Pharo-users] Alternate browser > > You do not have to install anything extra inside the image, Zodiac is a > standard part of Pharo. > > But, as the error says 'plugin missing', you do need to use a VM with the > SSL plugin, like a normal Pharo VM. > > Which VM/platform are you using ? > > >

Nov. 27, 2014

Re: [Pharo-users] ViDI Error: glx not supported

by Rafael Luque

Thank you Yuriy. Which are the supported platforms? 2014-11-27 10:27 GMT+01:00 Yuriy Tymchuk <yuriy.tymchuk(a)me.com>: > > On 27 Nov 2014, at 10:23, kilon alios <kilon.alios(a)gmail.com> wrote: > > What is Vidi ? cant find it in smalltalkhub > > > Hi Kilon, > > ViDI is a tool I'm developing to review the code. I host it on github: > https://github.com/Uko/Vidi/ > > Uko > > > On Thu, Nov 27, 2014 at 10:57 AM, Yuriy Tymchuk <yuriy.tymchuk(a)me.com> > wrote: > >> Hi Rafael, >> >> thank you for your interest in ViDI. I have not used Pharo on Linux, but >> I hope that soon we will find a solution for this :) >> >> Uko >> >> > On 27 Nov 2014, at 01:41, Rafael Luque <rafael.luque.leiva(a)gmail.com> >> wrote: >> > >> > Hi, >> > >> > I installed ViDI on Pharo 4 following the project instructions detailed >> in its GitHub page: >> > >> > Gofer new >> > smalltalkhubUser: 'YuriyTymchuk' >> > project: 'Configuration'; >> > configurationOf: 'Vidi'; >> > load. >> > #ConfigurationOfVidi asClass loadStable >> > >> > When I launch the ViDI option I get the error: "Error: glx not >> supported". >> > >> > I'm using Gentoo Linux with NVidia Optimus graphic card, so I use >> bumblebee to switch to NVidia and launched pharo using optirun command like >> this: >> > >> > $ optirun pharo-ui my-image >> > >> > I get glxspheres64 running successfully using the same procedure. >> > >> > How can I activate GLX support inside the Pharo image? I noted the >> option System > Settings > FFI > "Path to OpenGL library (on linux)" >> however I don't see (or I don't know) how to set this value. >> > >> > Thank you. >> >> >> > >

Nov. 27, 2014

Re: [Pharo-users] ViDI Error: glx not supported

by Yuriy Tymchuk

> On 27 Nov 2014, at 10:23, kilon alios <kilon.alios(a)gmail.com> wrote: > > What is Vidi ? cant find it in smalltalkhub Hi Kilon, ViDI is a tool Iâm developing to review the code. I host it on github: https://github.com/Uko/Vidi/ <https://github.com/Uko/Vidi/> Uko > > On Thu, Nov 27, 2014 at 10:57 AM, Yuriy Tymchuk <yuriy.tymchuk(a)me.com <mailto:yuriy.tymchuk@me.com>> wrote: > Hi Rafael, > > thank you for your interest in ViDI. I have not used Pharo on Linux, but I hope that soon we will find a solution for this :) > > Uko > > > On 27 Nov 2014, at 01:41, Rafael Luque <rafael.luque.leiva(a)gmail.com <mailto:rafael.luque.leiva@gmail.com>> wrote: > > > > Hi, > > > > I installed ViDI on Pharo 4 following the project instructions detailed in its GitHub page: > > > > Gofer new > > smalltalkhubUser: 'YuriyTymchuk' > > project: 'Configuration'; > > configurationOf: 'Vidi'; > > load. > > #ConfigurationOfVidi asClass loadStable > > > > When I launch the ViDI option I get the error: "Error: glx not supported". > > > > I'm using Gentoo Linux with NVidia Optimus graphic card, so I use bumblebee to switch to NVidia and launched pharo using optirun command like this: > > > > $ optirun pharo-ui my-image > > > > I get glxspheres64 running successfully using the same procedure. > > > > How can I activate GLX support inside the Pharo image? I noted the option System > Settings > FFI > "Path to OpenGL library (on linux)" however I don't see (or I don't know) how to set this value. > > > > Thank you. > > >

Nov. 27, 2014

Re: [Pharo-users] ViDI Error: glx not supported

by Marcus Denker

> On 27 Nov 2014, at 10:23, kilon alios <kilon.alios(a)gmail.com> wrote: > > What is Vidi ? cant find it in smalltalkhub > http://vidi.inf.usi.ch Marcus

Nov. 27, 2014

Re: [Pharo-users] ViDI Error: glx not supported

by kilon alios

What is Vidi ? cant find it in smalltalkhub On Thu, Nov 27, 2014 at 10:57 AM, Yuriy Tymchuk <yuriy.tymchuk(a)me.com> wrote: > Hi Rafael, > > thank you for your interest in ViDI. I have not used Pharo on Linux, but I > hope that soon we will find a solution for this :) > > Uko > > > On 27 Nov 2014, at 01:41, Rafael Luque <rafael.luque.leiva(a)gmail.com> > wrote: > > > > Hi, > > > > I installed ViDI on Pharo 4 following the project instructions detailed > in its GitHub page: > > > > Gofer new > > smalltalkhubUser: 'YuriyTymchuk' > > project: 'Configuration'; > > configurationOf: 'Vidi'; > > load. > > #ConfigurationOfVidi asClass loadStable > > > > When I launch the ViDI option I get the error: "Error: glx not > supported". > > > > I'm using Gentoo Linux with NVidia Optimus graphic card, so I use > bumblebee to switch to NVidia and launched pharo using optirun command like > this: > > > > $ optirun pharo-ui my-image > > > > I get glxspheres64 running successfully using the same procedure. > > > > How can I activate GLX support inside the Pharo image? I noted the > option System > Settings > FFI > "Path to OpenGL library (on linux)" > however I don't see (or I don't know) how to set this value. > > > > Thank you. > > >

Nov. 27, 2014

Re: [Pharo-users] ViDI Error: glx not supported

by Yuriy Tymchuk

Hi Rafael, thank you for your interest in ViDI. I have not used Pharo on Linux, but I hope that soon we will find a solution for this :) Uko > On 27 Nov 2014, at 01:41, Rafael Luque <rafael.luque.leiva(a)gmail.com> wrote: > > Hi, > > I installed ViDI on Pharo 4 following the project instructions detailed in its GitHub page: > > Gofer new > smalltalkhubUser: 'YuriyTymchuk' > project: 'Configuration'; > configurationOf: 'Vidi'; > load. > #ConfigurationOfVidi asClass loadStable > > When I launch the ViDI option I get the error: "Error: glx not supported". > > I'm using Gentoo Linux with NVidia Optimus graphic card, so I use bumblebee to switch to NVidia and launched pharo using optirun command like this: > > $ optirun pharo-ui my-image > > I get glxspheres64 running successfully using the same procedure. > > How can I activate GLX support inside the Pharo image? I noted the option System > Settings > FFI > "Path to OpenGL library (on linux)" however I don't see (or I don't know) how to set this value. > > Thank you.

Nov. 27, 2014

Re: [Pharo-users] Alternate browser

by Craig

Thanks Sven, Never mind. I just installed the September 25 VM and AltBrowser now works just fine :) Craig -----Original Message----- From: Craig [mailto:craig@hivemind.net] Sent: 27 November 2014 10:11 AM To: 'Any question about pharo is welcome' Subject: RE: [Pharo-users] Alternate browser Hi Sven, My VM is Cog VM 4.0.0 (release) Craig -----Original Message----- From: Pharo-users [mailto:pharo-users-bounces@lists.pharo.org] On Behalf Of Sven Van Caekenberghe Sent: 27 November 2014 10:06 AM To: Any question about pharo is welcome Subject: Re: [Pharo-users] Alternate browser You do not have to install anything extra inside the image, Zodiac is a standard part of Pharo. But, as the error says 'plugin missing', you do need to use a VM with the SSL plugin, like a normal Pharo VM. Which VM/platform are you using ?

Nov. 27, 2014

Re: [Pharo-users] Alternate browser

by Sven Van Caekenberghe

That is not the Pharo VM. And you didn't tell me which platform you are on. If you are on Linux, you need libSqueakSSL next to your VM binary. $ ldd bin/libSqueakSSL.so linux-gate.so.1 => (0xffffe000) libssl.so.0.9.8 => /usr/lib32/i686/cmov/libssl.so.0.9.8 (0xf768e000) libc.so.6 => /lib32/libc.so.6 (0xf753a000) libcrypto.so.0.9.8 => /usr/lib32/i686/cmov/libcrypto.so.0.9.8 (0xf73f7000) libdl.so.2 => /lib32/libdl.so.2 (0xf73f3000) libz.so.1 => /usr/lib32/libz.so.1 (0xf73de000) /lib/ld-linux.so.2 (0xf76e6000) Note that on a 64-bit system, you need 32-bit SSL libraries on your system. > On 27 Nov 2014, at 09:11, Craig <craig(a)hivemind.net> wrote: > > Hi Sven, > > My VM is Cog VM 4.0.0 (release) > > Craig > > -----Original Message----- > From: Pharo-users [mailto:pharo-users-bounces@lists.pharo.org] On Behalf Of Sven Van Caekenberghe > Sent: 27 November 2014 10:06 AM > To: Any question about pharo is welcome > Subject: Re: [Pharo-users] Alternate browser > > You do not have to install anything extra inside the image, Zodiac is a standard part of Pharo. > > But, as the error says 'plugin missing', you do need to use a VM with the SSL plugin, like a normal Pharo VM. > > Which VM/platform are you using ? > >

Nov. 27, 2014

Re: [Pharo-users] Alternate browser

by phil＠highoctane.be

AltBrowser loads ok in my 3.0 on PharoVM. Phil â

Nov. 27, 2014

Re: [Pharo-users] Alternate browser

by Craig

Hi Sven, My VM is Cog VM 4.0.0 (release) Craig -----Original Message----- From: Pharo-users [mailto:pharo-users-bounces@lists.pharo.org] On Behalf Of Sven Van Caekenberghe Sent: 27 November 2014 10:06 AM To: Any question about pharo is welcome Subject: Re: [Pharo-users] Alternate browser You do not have to install anything extra inside the image, Zodiac is a standard part of Pharo. But, as the error says 'plugin missing', you do need to use a VM with the SSL plugin, like a normal Pharo VM. Which VM/platform are you using ?

Nov. 27, 2014