May 2013 - Pharo-users - lists.pharo.org

Re: [Pharo-users] How to install SandstoneDb

by Bahman Movaqar

On 2013-05-27 17:42, Mariano Martinez Peck wrote: > Doesn't it have tests? I remember it did... Yes, it does. But as a Smalltalk newbie I have to figure out how to run them :-) > On Mon, May 27, 2013 at 10:11 AM, Bahman Movaqar <Bahman(a)bahmanm.com > <mailto:Bahman@bahmanm.com>> wrote: > > On 2013-05-27 16:16, Bahman Movaqar wrote: > > What is the correct way to install `SandstoneDb' in Pharo 2.0? > With the > > approach Pharo book takes[1], Pharo complains about two other packages > > to be installed as well: `DataStream' and `SmartRefStream'. > > > > TIA, > > > > [1] http://book.pharo-project.org/book/PharoTools/SandstoneDB > > Ah...stupid me. Once I added the `SandstoneDb' repository, I could > follow the instructions in `SandstoneDb' package which read > > "For Pharo2, load SandstoneDb, SandstoneDbTests, > SandstoneDbFileSystemStore, and SandstondDbFuel (required) in > this order." > > And apparently it is installed now. Now I just need to figure out a way > to check if it's really installed :-) > > Thank you people. -- Bahman Movaqar (http://BahmanM.com) ERP Evaluation, Implementation, Deployment Consultant

May 27, 2013

Re: [Pharo-users] How to install SandstoneDb

by Mariano Martinez Peck

Doesn't it have tests? I remember it did... On Mon, May 27, 2013 at 10:11 AM, Bahman Movaqar <Bahman(a)bahmanm.com> wrote: > On 2013-05-27 16:16, Bahman Movaqar wrote: > > What is the correct way to install `SandstoneDb' in Pharo 2.0? With the > > approach Pharo book takes[1], Pharo complains about two other packages > > to be installed as well: `DataStream' and `SmartRefStream'. > > > > TIA, > > > > [1] http://book.pharo-project.org/book/PharoTools/SandstoneDB > > Ah...stupid me. Once I added the `SandstoneDb' repository, I could > follow the instructions in `SandstoneDb' package which read > > "For Pharo2, load SandstoneDb, SandstoneDbTests, > SandstoneDbFileSystemStore, and SandstondDbFuel (required) in > this order." > > And apparently it is installed now. Now I just need to figure out a way > to check if it's really installed :-) > > Thank you people. > > -- > Bahman Movaqar (http://BahmanM.com) > ERP Evaluation, Implementation, Deployment Consultant > > -- Mariano http://marianopeck.wordpress.com

May 27, 2013

Re: [Pharo-users] How to install SandstoneDb

by Bahman Movaqar

On 2013-05-27 16:16, Bahman Movaqar wrote: > What is the correct way to install `SandstoneDb' in Pharo 2.0? With the > approach Pharo book takes[1], Pharo complains about two other packages > to be installed as well: `DataStream' and `SmartRefStream'. > > TIA, > > [1] http://book.pharo-project.org/book/PharoTools/SandstoneDB Ah...stupid me. Once I added the `SandstoneDb' repository, I could follow the instructions in `SandstoneDb' package which read "For Pharo2, load SandstoneDb, SandstoneDbTests, SandstoneDbFileSystemStore, and SandstondDbFuel (required) in this order." And apparently it is installed now. Now I just need to figure out a way to check if it's really installed :-) Thank you people. -- Bahman Movaqar (http://BahmanM.com) ERP Evaluation, Implementation, Deployment Consultant

May 27, 2013

Fwd: Gettext package for 2.0 - information not updated

by Usman Bhatti

Hello, I am looking to see how localization works in Pharo. There is a pharo book chapter that explains how to make it work but the chapter explains the working on Pharo 1.4. http://book.pharo-project.org/book/LanguageAndLibraries/Localisation Recent changes in STHub allow to load the package in Pharo 2.0 but I see a lot of references to FileDirectory (deprecated in 2.0) and hence the tutorial in the book does not work. The other package: System-Localization does not have much documentation so that does not help either. Can someone point to a working tutorial for Pharo localization for 2.0? tx, Usman

May 27, 2013

Re: [Pharo-users] How to install SandstoneDb

by Bahman Movaqar

On 2013-05-27 16:48, phil(a)highoctane.be wrote: > There is sample for an alternative technique (the one between "save the > full image" and "sandstone". > > I kind of ported the example for my own use by using Fuel based saves. > > http://www.smalltalkhub.com/#!/~philippeback/DripfeedIt/packages/DripfeedIt… @Phil: The site says "Page does not exist" which is weird. > You may need the DripfeedIt-Domain package as well as it contains the > domain objects (basic objects mind you). > > > On Mon, May 27, 2013 at 1:58 PM, Sven Van Caekenberghe <sven(a)stfx.eu > <mailto:sven@stfx.eu>> wrote: > > Hi, > > That is because `DataStream' and `SmartRefStream' are old > serialisation technologies. > There is a port of SandstoneDB using Fuel (and FileSystem), AFAIK. > Look at the specific versions on SqueakSource. > I can see that the original author made commits as well, which is > very good. @Sven: Thanks for the explanation. I tried the "Fuel" approach using these instructions[1] but there were errors during compilation. Pharo complained about `SDFileStore' not existing in the image and was unable to compile `SDFuelSerializer'. > There is also http://smalltalkhub.com/#!/~gnaritas/SandstoneDb but I > don't know how it is related. > > Sven > > On 27 May 2013, at 13:46, Bahman Movaqar <Bahman(a)BahmanM.com> wrote: > > > What is the correct way to install `SandstoneDb' in Pharo 2.0? > With the > > approach Pharo book takes[1], Pharo complains about two other packages > > to be installed as well: `DataStream' and `SmartRefStream'. > > > > TIA, > > > > [1] http://book.pharo-project.org/book/PharoTools/SandstoneDB [1] http://marianopeck.wordpress.com/2011/08/19/boosting-sandstonedb-with-fuel/ -- Bahman Movaqar (http://BahmanM.com) ERP Evaluation, Implementation, Deployment Consultant

May 27, 2013

Re: [Pharo-users] How to install SandstoneDb

by phil＠highoctane.be

There is sample for an alternative technique (the one between "save the full image" and "sandstone". I kind of ported the example for my own use by using Fuel based saves. http://www.smalltalkhub.com/#!/~philippeback/DripfeedIt/packages/DripfeedIt… You may need the DripfeedIt-Domain package as well as it contains the domain objects (basic objects mind you). Phil On Mon, May 27, 2013 at 1:58 PM, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: > Hi, > > That is because `DataStream' and `SmartRefStream' are old serialisation > technologies. > There is a port of SandstoneDB using Fuel (and FileSystem), AFAIK. > Look at the specific versions on SqueakSource. > I can see that the original author made commits as well, which is very > good. > > There is also http://smalltalkhub.com/#!/~gnaritas/SandstoneDb but I > don't know how it is related. > > Sven > > On 27 May 2013, at 13:46, Bahman Movaqar <Bahman(a)BahmanM.com> wrote: > > > What is the correct way to install `SandstoneDb' in Pharo 2.0? With the > > approach Pharo book takes[1], Pharo complains about two other packages > > to be installed as well: `DataStream' and `SmartRefStream'. > > > > TIA, > > > > [1] http://book.pharo-project.org/book/PharoTools/SandstoneDB > > -- > > Bahman Movaqar (http://BahmanM.com) > > ERP Evaluation, Implementation, Deployment Consultant > > > -- > Sven Van Caekenberghe > Proudly supporting Pharo > http://pharo.org > http://association.pharo.org > http://consortium.pharo.org > > > > > > >

May 27, 2013

Re: [Pharo-users] How to install SandstoneDb

by Sven Van Caekenberghe

Hi, That is because `DataStream' and `SmartRefStream' are old serialisation technologies. There is a port of SandstoneDB using Fuel (and FileSystem), AFAIK. Look at the specific versions on SqueakSource. I can see that the original author made commits as well, which is very good. There is also http://smalltalkhub.com/#!/~gnaritas/SandstoneDb but I don't know how it is related. Sven On 27 May 2013, at 13:46, Bahman Movaqar <Bahman(a)BahmanM.com> wrote: > What is the correct way to install `SandstoneDb' in Pharo 2.0? With the > approach Pharo book takes[1], Pharo complains about two other packages > to be installed as well: `DataStream' and `SmartRefStream'. > > TIA, > > [1] http://book.pharo-project.org/book/PharoTools/SandstoneDB > -- > Bahman Movaqar (http://BahmanM.com) > ERP Evaluation, Implementation, Deployment Consultant -- Sven Van Caekenberghe Proudly supporting Pharo http://pharo.org http://association.pharo.org http://consortium.pharo.org

May 27, 2013

How to install SandstoneDb

by Bahman Movaqar

What is the correct way to install `SandstoneDb' in Pharo 2.0? With the approach Pharo book takes[1], Pharo complains about two other packages to be installed as well: `DataStream' and `SmartRefStream'. TIA, [1] http://book.pharo-project.org/book/PharoTools/SandstoneDB -- Bahman Movaqar (http://BahmanM.com) ERP Evaluation, Implementation, Deployment Consultant

May 27, 2013

Re: [Pharo-users] ORM with PostgreSQL support

by Sven Van Caekenberghe

http://dbxtalk.smallworks.com.ar On 27 May 2013, at 11:08, "phil(a)highoctane.be" <phil(a)highoctane.be> wrote: > http://book.pharo-project.org/book/PharoTools/Glorp/ > > > On Mon, May 27, 2013 at 10:44 AM, Bahman Movaqar <Bahman(a)bahmanm.com> wrote: > Hi all, > > I'm completely new to Smalltalk world so please bear with me. > > Coming from the Java world, I'm used to using an ORM when developing a > database-backed application. What are the options in the Smalltalk > world? I'm specially looking for something that supports PostgreSQL as > that's what I 99.99% of the time use :-) > > Would you please give me some pointers along with links to the > documentations? > > TIA, > > -- > Bahman Movaqar (http://BahmanM.com) > ERP Evaluation, Implementation, Deployment Consultant > > >

May 27, 2013

Re: [Pharo-users] ORM with PostgreSQL support

by phil＠highoctane.be

In fact, check http://www.slideshare.net/esug/dbxtalk and http://rmod.lille.inria.fr/archives/events/2012PharoConf/Slides/2012-PharoC… Phil On Mon, May 27, 2013 at 10:44 AM, Bahman Movaqar <Bahman(a)bahmanm.com> wrote: > Hi all, > > I'm completely new to Smalltalk world so please bear with me. > > Coming from the Java world, I'm used to using an ORM when developing a > database-backed application. What are the options in the Smalltalk > world? I'm specially looking for something that supports PostgreSQL as > that's what I 99.99% of the time use :-) > > Would you please give me some pointers along with links to the > documentations? > > TIA, > > -- > Bahman Movaqar (http://BahmanM.com) > ERP Evaluation, Implementation, Deployment Consultant > > >

May 27, 2013