November 2013 - Pharo-users

Re: [Pharo-users] Any configuration file parsing library

by GÃ¶ran Krampe

Hi! On 11/28/2013 02:39 PM, Damien Cassou wrote: > Hi, > > I'm looking for a library to parse configuration files. I have no > configuration format yet so I'm open. I was thinking of a typical INI > format: > > [section1] > param1=value1 > param2=value2 > > [section2] > param1=value3 > ... In Gjallar we used the ini format and it often works just fine for "settings". :) But just to throw in something from the sideline, Tirade is also quite nifty: "Section 1" param1: 'value1'. param2: 123. "Section 2" blabla: $a. ...as you can see it is "just Smalltalk messages". One disadvantage of Tirade would be that you need to remember the "." at the end of each message. An advantage is that you don't need to "parse it", you just implement the messages in some class and then you can use the the reader in Tirade to just "feed" those messages to that object. More info: http://goran.krampe.se/category/tirade/ regards, GÃ¶ran

Nov. 28, 2013

Re: [Pharo-users] Any configuration file parsing library

by Sven Van Caekenberghe

Hi Damien, On 28 Nov 2013, at 15:10, Damien Cassou <damien.cassou(a)gmail.com> wrote: > On Thu, Nov 28, 2013 at 2:39 PM, Damien Cassou <damien.cassou(a)gmail.com> wrote: >> I'm looking for a library to parse configuration files. > > > My colleagues thought using STON could be a good idea. Would you use > STON to write a configuration file? Yes, definitively. If you write it out with the pretty print option, it is quite readable/editable. You can also both read and write. If non-smalltalkers are involved, JSON is a simpler alternative that requires more work from your side. Sven > -- > Damien Cassou > http://damiencassou.seasidehosting.st > > "Success is the ability to go from one failure to another without > losing enthusiasm." > Winston Churchill >

Nov. 28, 2013

Re: [Pharo-users] Any configuration file parsing library

by Damien Cassou

On Thu, Nov 28, 2013 at 2:39 PM, Damien Cassou <damien.cassou(a)gmail.com> wrote: > I'm looking for a library to parse configuration files. My colleagues thought using STON could be a good idea. Would you use STON to write a configuration file? -- Damien Cassou http://damiencassou.seasidehosting.st "Success is the ability to go from one failure to another without losing enthusiasm." Winston Churchill

Nov. 28, 2013

Re: [Pharo-users] Any configuration file parsing library

by phil＠highoctane.be

www.jarober.com/blog/blogView?showComments=true&printTitle=ST_4U_397:_INI_F… On Thursday, November 28, 2013, Damien Cassou wrote: > Hi, > > I'm looking for a library to parse configuration files. I have no > configuration format yet so I'm open. I was thinking of a typical INI > format: > > [section1] > param1=value1 > param2=value2 > > [section2] > param1=value3 > ... > > -- > Damien Cassou > http://damiencassou.seasidehosting.st > > "Success is the ability to go from one failure to another without > losing enthusiasm." > Winston Churchill > > > -- --- Philippe Back Dramatic Performance Improvements Mob: +32(0) 478 650 140 | Fax: +32 (0) 70 408 027 Mail:phil@highoctane.be | Web: http://philippeback.eu Blog: http://philippeback.be | Twitter: @philippeback Youtube: http://www.youtube.com/user/philippeback/videos High Octane SPRL rue cour Boisacq 101 | 1301 Bierges | Belgium Pharo Consortium Member - http://consortium.pharo.org/ Featured on the Software Process and Measurement Cast - http://spamcast.libsyn.com Sparx Systems Enterprise Architect and Ability Engineering EADocX Value Added Reseller

Nov. 28, 2013

Re: [Pharo-users] Any configuration file parsing library

by phil＠highoctane.be

map.squeak.org/package/3b80fe5d-5762-4e52-9943-f98d6f35851b On Thursday, November 28, 2013, Damien Cassou wrote: > Hi, > > I'm looking for a library to parse configuration files. I have no > configuration format yet so I'm open. I was thinking of a typical INI > format: > > [section1] > param1=value1 > param2=value2 > > [section2] > param1=value3 > ... > > -- > Damien Cassou > http://damiencassou.seasidehosting.st > > "Success is the ability to go from one failure to another without > losing enthusiasm." > Winston Churchill > > > -- --- Philippe Back Dramatic Performance Improvements Mob: +32(0) 478 650 140 | Fax: +32 (0) 70 408 027 Mail:phil@highoctane.be | Web: http://philippeback.eu Blog: http://philippeback.be | Twitter: @philippeback Youtube: http://www.youtube.com/user/philippeback/videos High Octane SPRL rue cour Boisacq 101 | 1301 Bierges | Belgium Pharo Consortium Member - http://consortium.pharo.org/ Featured on the Software Process and Measurement Cast - http://spamcast.libsyn.com Sparx Systems Enterprise Architect and Ability Engineering EADocX Value Added Reseller

Nov. 28, 2013

Re: [Pharo-users] Any configuration file parsing library

by Sven Van Caekenberghe

There is INIFile in the Configuration Browser. But I know nothing about it, Torsten wrote it I guess. On 28 Nov 2013, at 14:39, Damien Cassou <damien.cassou(a)gmail.com> wrote: > Hi, > > I'm looking for a library to parse configuration files. I have no > configuration format yet so I'm open. I was thinking of a typical INI > format: > > [section1] > param1=value1 > param2=value2 > > [section2] > param1=value3 > ... > > -- > Damien Cassou > http://damiencassou.seasidehosting.st > > "Success is the ability to go from one failure to another without > losing enthusiasm." > Winston Churchill >

Nov. 28, 2013

Any configuration file parsing library

by Damien Cassou

Hi, I'm looking for a library to parse configuration files. I have no configuration format yet so I'm open. I was thinking of a typical INI format: [section1] param1=value1 param2=value2 [section2] param1=value3 ... -- Damien Cassou http://damiencassou.seasidehosting.st "Success is the ability to go from one failure to another without losing enthusiasm." Winston Churchill

Nov. 28, 2013

Re: [Pharo-users] reporting bugs

by btc＠openinworld.com

Nov. 28, 2013

Re: [Pharo-users] [Voyage] #selectAll:sortBy: not implemented?

by VÃctor Casado

Hi Johan, Thanks a lot for report the update and of course for been working on it, will be of great help! If I have any suggestions I'll let you know. Regards, -- View this message in context: http://forum.world.st/Voyage-selectAll-sortBy-not-implemented-tp4725324p472… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

Nov. 28, 2013

Re: [Pharo-users] reporting bugs

by Sven Van Caekenberghe

Thx! Upvoted https://news.ycombinator.com/item?id=6814011 as well On 28 Nov 2013, at 12:01, phil(a)highoctane.be wrote: > Link is in the right margin. > > and in the text as well from now on. > > --- > Philippe Back > Dramatic Performance Improvements > Mob: +32(0) 478 650 140 | Fax: +32 (0) 70 408 027 > Mail:phil@highoctane.be | Web: http://philippeback.eu > Blog: http://philippeback.be | Twitter: @philippeback > Youtube: http://www.youtube.com/user/philippeback/videos > > High Octane SPRL > rue cour Boisacq 101 | 1301 Bierges | Belgium > > Pharo Consortium Member - http://consortium.pharo.org/ > Featured on the Software Process and Measurement Cast - http://spamcast.libsyn.com > Sparx Systems Enterprise Architect and Ability Engineering EADocX Value Added Reseller > > > > > On Thu, Nov 28, 2013 at 11:47 AM, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: > Yes, great! > > One remark though: could the movie be embedded differently ? I have no flash player (sucks too much CPU), but now, I cannot even see a link (to view it in Chrome with its builtin flash). Could you add a plain link as well, please ? > > Thx, > > Sven > > On 28 Nov 2013, at 11:38, Benjamin <Benjamin.VanRyseghem.Pharo(a)gmail.com> wrote: > > > Looks great :) > > > > Thanks for the contribution :) > > Ben > > > > On 28 Nov 2013, at 11:13, phil(a)highoctane.be wrote: > > > >> Due to the somewhat unclear process, I updated the issue tracking page with some details about registration along with pictures. > >> > >> http://www.pharo-project.org/community/issue-tracking > >> > >> Tell me if you see things that aren't right. > >> > >> Phil > >> > >> > >> > >> > >> On Thu, Nov 28, 2013 at 10:42 AM, Yuriy Tymchuk <yuriy.tymchuk(a)me.com> wrote: > >> > >> On 28 Nov 2013, at 10:28, Nicolai Hess <nicolaihess(a)web.de> wrote: > >> > >>> Thank you all for your help. > >>> I already tried http://bugs.pharo.org/issues/register (month ago and now again),but nothing happened. > >>> I missed that part where I have to use "forgot password" to even get an initial password. > >>> Can you write this important part right on the initial fogbugz page. For those people who don't > >>> watch tutorial videos :-) > >> > >> Yes, also I couldnât make my me.com mail to work. I hope that soon we will have normal bug tracker :) > >> > >> Uko > >> > >>> > >>> > >>> > >>> > >>> 2013/11/28 Benjamin <Benjamin.VanRyseghem.Pharo(a)gmail.com> > >>> There is also this perm link :) > >>> > >>> http://bugs.pharo.org/issues/register > >>> > >>> Ben > >>> > >>> On 28 Nov 2013, at 09:45, phil(a)highoctane.be wrote: > >>> > >>>> http://bugs.pharo.org/issues/ > >>>> > >>>> Register link on top: You can register to the FogBugz issue tracker here. > >>>> > >>>> Enjoy, > >>>> > >>>> --- > >>>> Philippe Back > >>>> Dramatic Performance Improvements > >>>> Mob: +32(0) 478 650 140 | Fax: +32 (0) 70 408 027 > >>>> Mail:phil@highoctane.be | Web: http://philippeback.eu > >>>> Blog: http://philippeback.be | Twitter: @philippeback > >>>> Youtube: http://www.youtube.com/user/philippeback/videos > >>>> > >>>> High Octane SPRL > >>>> rue cour Boisacq 101 | 1301 Bierges | Belgium > >>>> > >>>> Pharo Consortium Member - http://consortium.pharo.org/ > >>>> Featured on the Software Process and Measurement Cast - http://spamcast.libsyn.com > >>>> Sparx Systems Enterprise Architect and Ability Engineering EADocX Value Added Reseller > >>>> > >>>> > >>>> > >>>> > >>>> On Thu, Nov 28, 2013 at 9:19 AM, Nicolai Hess <nicolaihess(a)web.de> wrote: > >>>> What do I have to do for getting access to pharo.fogbugz.com for bug reporting? > >>>> > >>>> regards > >>>> Nicolai > >>>> > >>>> > >>> > >>> > >> > >> > > > > > >

Nov. 28, 2013