November 2011 - Pharo-users

Re: [Pharo-users] Load package without warnings

by Francois Stephany

Thanks ! On 08/11/11 16:53, David T. Lewis wrote: > On Tue, Nov 08, 2011 at 04:25:29PM -0800, Francois Stephany wrote: >> >> On another note, it would be handy to be able to write: >> >> (PipeableOSProcess command: 'convert' environment: env ) output >> >> instead of: >> >> (PipeableOSProcess >> command: 'convert' >> environment: env >> workingDir: nil >> input: nil >> output: nil >> error: nil >> errorPipelineStream: nil) output > > Done. Thank you. > > Dave

Nov. 9, 2011

Re: [Pharo-users] ConfigurationOfPostgresV2 (Re: GlorpDBX)

by Sven Van Caekenberghe

On 09 Nov 2011, at 15:23, Mariano Martinez Peck wrote: > Thanks Sven. I fixed it. > Now you should be able to do > > Gofer new > squeaksource: 'MetacelloRepository'; > package: 'ConfigurationOfGlorpDBX'; > load. > > ConfigurationOfGlorpDBX project latestVersion load: 'GlorpPostgresV2NativeWithTests'. > > And everything should be fine. Thanks a lot, Mariano. Sven

Nov. 9, 2011

Re: [Pharo-users] ConfigurationOfPostgresV2 (Re: GlorpDBX)

by Mariano Martinez Peck

Thanks Sven. I fixed it. Now you should be able to do Gofer new squeaksource: 'MetacelloRepository'; package: 'ConfigurationOfGlorpDBX'; load. ConfigurationOfGlorpDBX project latestVersion load: 'GlorpPostgresV2NativeWithTests'. And everything should be fine. Thanks On Tue, Nov 8, 2011 at 6:17 AM, Sven Van Caekenberghe <sven(a)beta9.be> wrote: > Hi, > > As I wrote some time ago: > > On 24 Oct 2011, at 09:38, Sven Van Caekenberghe wrote: > > > A couple of days ago I got it working in 1.3 with the native (non-dbx) > postgresql driver. > > > > I basically did: > > > > Gofer new > > squeaksource: 'MetacelloRepository'; > > package: 'ConfigurationOfGlorpDBX'; > > load. > > > > ConfigurationOfGlorpDBX project latestVersion load: > 'GlorpPostgresV2NativeWithTests'. > > > > I can't remember exactly, but it more or less worked out of the box. > > > > I did some patches for timestamp decoding and blobs, but these won't hit > you right away. > > For the patches, see my two other mails of today. > > I do also have an issue with ConfigurationOfPostgresV2: it depends on > Cryptography, but that is unneccesary on Pharo as I think the only thing > needed is MD5 encoding which Pharo has out of the box. (Cryptography is way > too big). > > I can't seem to figure out where this config actually came from (it says > local package cache in my image), ConfigurationOfGlorpDBX>>#baseline22: says > > spec package: 'GlorpDriverPostgreSQL' with: [ > spec repository: ' > http://www.squeaksource.com/PostgresV2'. > spec postLoadDoIt: > #postLoadGlorpPostgresNativeDriverDBXTalkPharo. > spec requires: #('PostgresV2' 'Glorp' ) ]. > > But I can't find it in http://www.squeaksource.com/PostgresV2 either ;-) > > Anyway, could someone please help to patch ConfigurationOfPostgresV2 to > not load Cryptography on Pharo ? > > Thx, > > Sven > > > > > -- Mariano http://marianopeck.wordpress.com

Nov. 9, 2011

Re: [Pharo-users] Load package without warnings

by David T. Lewis

On Tue, Nov 08, 2011 at 04:25:29PM -0800, Francois Stephany wrote: > > On another note, it would be handy to be able to write: > > (PipeableOSProcess command: 'convert' environment: env ) output > > instead of: > > (PipeableOSProcess > command: 'convert' > environment: env > workingDir: nil > input: nil > output: nil > error: nil > errorPipelineStream: nil) output Done. Thank you. Dave

Nov. 9, 2011

Re: [Pharo-users] Load package without warnings

by Francois Stephany

Hi Dave, Yep, it works fine without any warning when I load CommandShellBase CommandShellCommands CommandShellPiping Thank you ! (ans thanks Sean for your question about $PATH: http://forum.world.st/OSProcess-PATH-td3603346.html ) On another note, it would be handy to be able to write: (PipeableOSProcess command: 'convert' environment: env ) output instead of: (PipeableOSProcess command: 'convert' environment: env workingDir: nil input: nil output: nil error: nil errorPipelineStream: nil) output > Is this a warning about the MVC classes? If so, you can load the > individual CommandShell packages and leave the MVC package out. > In other words, rather than loading CommandShell-dtl.55, you can > load CommandShell-Base-dtl.17 plus CommandShell-Commands-dtl.9 and > so on, but do not load CommandShell-MVC-dtl.2. > > I split CommandShell into individual packages for this reason. If > you want the whole package, you can still load CommandShell-dtl.55 > and ignore the warnings, otherwise you can pick the sub-packages > that you want. > > HTH, > Dave > > -- http://tulipemoutarde.be BE: +32 (0)65 709 131 CA: +1 778 558 3225

Nov. 9, 2011

Re: [Pharo-users] Load package without warnings

by David T. Lewis

On Mon, Nov 07, 2011 at 06:53:32PM -0800, Francois Stephany wrote: > Hi list, > > Is there a way to load packages without having to click 'Proceed' when > you get warnings ? > > I'd like to add CommandShell in a metacello configuration loaded on a > headless server... Is this a warning about the MVC classes? If so, you can load the individual CommandShell packages and leave the MVC package out. In other words, rather than loading CommandShell-dtl.55, you can load CommandShell-Base-dtl.17 plus CommandShell-Commands-dtl.9 and so on, but do not load CommandShell-MVC-dtl.2. I split CommandShell into individual packages for this reason. If you want the whole package, you can still load CommandShell-dtl.55 and ignore the warnings, otherwise you can pick the sub-packages that you want. HTH, Dave

Nov. 8, 2011

ConfigurationOfPostgresV2 (Re: GlorpDBX)

by Sven Van Caekenberghe

Hi, As I wrote some time ago: On 24 Oct 2011, at 09:38, Sven Van Caekenberghe wrote: > A couple of days ago I got it working in 1.3 with the native (non-dbx) postgresql driver. > > I basically did: > > Gofer new > squeaksource: 'MetacelloRepository'; > package: 'ConfigurationOfGlorpDBX'; > load. > > ConfigurationOfGlorpDBX project latestVersion load: 'GlorpPostgresV2NativeWithTests'. > > I can't remember exactly, but it more or less worked out of the box. > > I did some patches for timestamp decoding and blobs, but these won't hit you right away. For the patches, see my two other mails of today. I do also have an issue with ConfigurationOfPostgresV2: it depends on Cryptography, but that is unneccesary on Pharo as I think the only thing needed is MD5 encoding which Pharo has out of the box. (Cryptography is way too big). I can't seem to figure out where this config actually came from (it says local package cache in my image), ConfigurationOfGlorpDBX>>#baseline22: says spec package: 'GlorpDriverPostgreSQL' with: [ spec repository: 'http://www.squeaksource.com/PostgresV2'. spec postLoadDoIt: #postLoadGlorpPostgresNativeDriverDBXTalkPharo. spec requires: #('PostgresV2' 'Glorp' ) ]. But I can't find it in http://www.squeaksource.com/PostgresV2 either ;-) Anyway, could someone please help to patch ConfigurationOfPostgresV2 to not load Cryptography on Pharo ? Thx, Sven

Nov. 8, 2011

Re: [Pharo-users] Load package without warnings

by StÃ©phane Ducasse

I do not know :) Let us wait for people waking up did you check suppress warning? Stef On Nov 8, 2011, at 8:31 AM, FranÃ§ois Stephany wrote: > Is it not the case at the moment when loading packages on images tested with Jenkins? > > On Nov 7, 2011 10:52 PM, "StÃ©phane Ducasse" <stephane.ducasse(a)inria.fr> wrote: > Would be nice to have. > We should have more warning and optional ui only on non headless images instead of the inverse. > > Stef > > On Nov 8, 2011, at 3:53 AM, Francois Stephany wrote: > > > Hi list, > > > > Is there a way to load packages without having to click 'Proceed' when you get warnings ? > > > > I'd like to add CommandShell in a metacello configuration loaded on a headless server... > > > > > > Cheers, > > > > Francois > > > >

Nov. 8, 2011

Re: [Pharo-users] Load package without warnings

by FranÃ§ois Stephany

Is it not the case at the moment when loading packages on images tested with Jenkins? On Nov 7, 2011 10:52 PM, "StÃ©phane Ducasse" <stephane.ducasse(a)inria.fr> wrote: > Would be nice to have. > We should have more warning and optional ui only on non headless images > instead of the inverse. > > Stef > > On Nov 8, 2011, at 3:53 AM, Francois Stephany wrote: > > > Hi list, > > > > Is there a way to load packages without having to click 'Proceed' when > you get warnings ? > > > > I'd like to add CommandShell in a metacello configuration loaded on a > headless server... > > > > > > Cheers, > > > > Francois > > > > >

Nov. 8, 2011

Re: [Pharo-users] Load package without warnings

by StÃ©phane Ducasse

Would be nice to have. We should have more warning and optional ui only on non headless images instead of the inverse. Stef On Nov 8, 2011, at 3:53 AM, Francois Stephany wrote: > Hi list, > > Is there a way to load packages without having to click 'Proceed' when you get warnings ? > > I'd like to add CommandShell in a metacello configuration loaded on a headless server... > > > Cheers, > > Francois >

Nov. 8, 2011