July 2010 - Pharo-users - lists.pharo.org

Recent Submissions

by Benjamin Van Ryseghem

Ok Stef, so i've separated my work from the Tool-Browser class (there is a bug to fix into the RecentMessageSet class in order to remove useless multiples entries) Gofer new squeaksource: 'PharoTaskForces'; package: 'RecentSubmissions'; load A way to open the alternate viewer is by doing: RecentSubmissions openInWorld Ben

July 19, 2010

Re: [Pharo-users] [Pharo-project] pharo website - screencasts

by Mariano Martinez Peck

maybe it is good to ask pharo users also. I cc'ed them. this is cool laurent :) mariano On Mon, Jul 19, 2010 at 9:10 PM, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr > wrote: > good initiative > > May be you should say > more screencasts at: ... > > On Jul 19, 2010, at 8:55 PM, laurent laffont wrote: > > > Hi, > > > > I've added a "screencast wall" at > http://pharo-project.org/documentation/screencasts > > > > I've tried to put those which best show Pharo for newcommers, feedback > welcome. > > > > Cheers, > > > > Laurent Laffont > > > > http://pharocasts.blogspot.com/ > > http://magaloma.blogspot.com/ > > _______________________________________________ > > Pharo-project mailing list > > Pharo-project(a)lists.gforge.inria.fr > > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

July 19, 2010

Recent Submissions

by Benjamin Van Ryseghem

Hi everybody, I'm a new Smalltalker tutored by StÃ©phane Ducasse who gave me the project to rewrite the "Recent Submissions" tool to improve the UI and the functionalities. I've already done a basic version posted in PharoTaskForces (the RecentMessageSet class in Tool-Browser) on squeaksource, so if anybody have ideas or advice, I'll thank him a lot Benjamin Van Ryseghem

July 19, 2010

Merging

by David McCloskey

I'm trying to merge code in Pharo 1.0 and I figured out how to point the arrows the right way but I can't figure out how to say that I'm done or accept my changes. There are 2 conflicts. If I right click on the message name in the top left pane, I can pick to keep current version, use incoming version, or mark as conflict. This works on a whole-message basis. But I can also click on the arrows in between the 2 versions of code and pick that I want one line from current version, one from incoming version, etc. How can I then say that I want to use the result of that to resolve the conflict? -- Dave McCloskey davemccloskey(a)gmail.com

July 19, 2010

Re: [Pharo-users] [smalltalk-research] [Survey] Assess the cycles in your software

by Laval Jannik

Hi Lukas, The question should be: How many packages are contained in the software you want to analyze ? I change it and commit a new version. Thank you Lukas. Cheers, Jannik On Jul 19, 2010, at 11:22 , Lukas Renggli wrote: > Hi Jannik, > > I can't parse: > > "How much do you think the number of packages of the software?" > > How much what? What is the question? > > Lukas > > On 19 July 2010 08:36, Laval Jannik <jannik.laval(a)gmail.com> wrote: >> Hi Pharoers, and Smalltalkers in general, >> >> Have you seen waited to assess the cycles in your software? Now you can :) >> >> We request some of you to perform an experiment using DSM to see your software package structure and to fix cycles between packages. Our tool shows dependencies between packages and highlight some bad dependencies generating structure cycles. It also helps to understand dependencies. >> >> Your goal is to fill a survey using our tool. >> I prepared a mini-tutorial about DSM and eDSM. It can help you to understand the visualization tool. >> >> To ease the use of our tool, I loaded it in a PharoCore1.2. And there are two archives available: >> - the first contains an image with our tool with a model of Pharo loaded in it, so you can play with our tool on pharo itself. It can be downloaded here: http://dl.dropbox.com/u/7739334/dsmWithPharo.zip. Pay attention, the image is slow. >> - the second contains the same thing without the model of Pharo. Here, you have to load your code, then populate a moose model and use the tool. It can be downloaded here: http://dl.dropbox.com/u/7739334/dsmWithoutPharo.zip >> The two archives contain the tutorial and the survey. If you are a pharo integrator, we suggest you to take the one with Pharo model loaded, else the other. >> >> To use our tool, load your tool in Pharo. Then do "MoosePanel open", and import your software in Moose by "import from Smalltalk image". When it is imported, select your project in the list on the left of MoosePanel, and select "all model packages" on the list on center. >> >> Then, you have two choices: >> - you can scan all your project: right click on "all model packages" and do DSM. >> - or select "all model packages" then select some packages in the next list and right click, do DSM. >> >> After that, you can perform the survey (with reading of the tutorial). We need your answers for the end of August. So, you have two months to do it. >> >> If you have any question, just let me know. >> >> Best regards, >> Jannik. >> >> --- >> Jannik Laval >> PhD Student - Rmod Team - INRIA >> Certified Project Management Associate (IPMA) >> http://www.jannik-laval.eu >> http://rmod.lille.inria.fr >> --- >> >> > > > > -- > Lukas Renggli > www.lukas-renggli.ch --- Jannik Laval

July 19, 2010

[Survey] Assess the cycles in your software

by Laval Jannik

Hi Pharoers, and Smalltalkers in general, Have you seen waited to assess the cycles in your software? Now you can :) We request some of you to perform an experiment using DSM to see your software package structure and to fix cycles between packages. Our tool shows dependencies between packages and highlight some bad dependencies generating structure cycles. It also helps to understand dependencies. Your goal is to fill a survey using our tool. I prepared a mini-tutorial about DSM and eDSM. It can help you to understand the visualization tool. To ease the use of our tool, I loaded it in a PharoCore1.2. And there are two archives available: - the first contains an image with our tool with a model of Pharo loaded in it, so you can play with our tool on pharo itself. It can be downloaded here: http://dl.dropbox.com/u/7739334/dsmWithPharo.zip. Pay attention, the image is slow. - the second contains the same thing without the model of Pharo. Here, you have to load your code, then populate a moose model and use the tool. It can be downloaded here: http://dl.dropbox.com/u/7739334/dsmWithoutPharo.zip The two archives contain the tutorial and the survey. If you are a pharo integrator, we suggest you to take the one with Pharo model loaded, else the other. To use our tool, load your tool in Pharo. Then do "MoosePanel open", and import your software in Moose by "import from Smalltalk image". When it is imported, select your project in the list on the left of MoosePanel, and select "all model packages" on the list on center. Then, you have two choices: - you can scan all your project: right click on "all model packages" and do DSM. - or select "all model packages" then select some packages in the next list and right click, do DSM. After that, you can perform the survey (with reading of the tutorial). We need your answers for the end of August. So, you have two months to do it. If you have any question, just let me know. Best regards, Jannik. --- Jannik Laval PhD Student - Rmod Team - INRIA Certified Project Management Associate (IPMA) http://www.jannik-laval.eu http://rmod.lille.inria.fr ---

July 19, 2010

Fwd: [ANN 1.1] pre-built core 1.1 #11410 RELEASE

by Marcus Denker

Begin forwarded message: > From: Marcus Denker <marcus.denker(a)inria.fr> > Date: July 17, 2010 11:45:51 AM GMT+02:00 > To: "Pharo-project(a)lists.gforge.inria.fr Development" <Pharo-project(a)lists.gforge.inria.fr> > Subject: [ANN 1.1] pre-built core 1.1 #11410 RELEASE > > > https://gforge.inria.fr/frs/download.php/27288/PharoCore-1.1-11410.zip > > -- > Marcus Denker -- http://www.marcusdenker.de > INRIA Lille -- Nord Europe. Team RMoD. > -- Marcus Denker -- http://www.marcusdenker.de INRIA Lille -- Nord Europe. Team RMoD.

July 18, 2010

Re: [Pharo-users] [Pharo-project] Pharocasts: Start Pharo on GNU/Linux

by StÃ©phane Ducasse

This is good we will have a really nice set of videos for beginners. May be after we will have to organize them. Stef On Jul 17, 2010, at 11:38 PM, laurent laffont wrote: > For beginners, how to download image, sources, VM and open Pharo. Start spreading :) > > http://pharocasts.blogspot.com/2010/07/pharo-install.html > > Cheers, > > Laurent Laffont > > http://pharocasts.blogspot.com/ > http://magaloma.blogspot.com/ > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

July 18, 2010

Pharocasts: Start Pharo on GNU/Linux

by laurent laffont

For beginners, how to download image, sources, VM and open Pharo. Start spreading :) http://pharocasts.blogspot.com/2010/07/pharo-install.html Cheers, Laurent Laffont http://pharocasts.blogspot.com/ http://magaloma.blogspot.com/

July 17, 2010

Re: [Pharo-users] How to make "extract method" preserve my formatting?

by Lukas Renggli

It is currently not possible to preserve the original formatting with the "extract method" refactoring, since the refactoring causes quite significant changes in two methods. You can however fine-tune the way the refactoring engine should format code in such cases in the setting browser. Lukas On 15 July 2010 23:44, Pat Maddox <patmaddox(a)me.com> wrote: > The extract method refactoring works great but always formats my code in a way that I hate. Â It indents certain things way too much, adds parens where I don't want them, etc. Â Is there a way for it to preserve my formatting? Â I wrote the code to be nice and readable to me, and I'd like to keep it that way. > > Pat > > _______________________________________________ > Pharo-users mailing list > Pharo-users(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users > -- Lukas Renggli www.lukas-renggli.ch

July 16, 2010