June 2010 - Pharo-users - lists.pharo.org

Re: [Pharo-users] Error:invalid utf8 input detected.

by Mariano Martinez Peck

On Thu, Jun 24, 2010 at 12:46 PM, tgc05 <thomas(a)costick.net> wrote: > > Hi Mariano. Thanks for this. I'm new to Pharo and have been away from > Smalltalk for several years (way too long), so right now I am not ready to > start debugging the code; perhaps I will return to this when I have > recovered my "Smalltalk legs" :) I had hoped someone more in touch with > the Pharo project would be able to fix this. > > Don't worry. I lack of time :( (and probably of knoweldege too) > Meanwhile, the point I want to emphasise is that this error shows up for > anyone working through the Pharo By Example book. Right from the start, > the > book advises the reader to use a different image file from the quick start > one provided with Pharo. Doing this, the reader will immediately run into > the "Error:invalid utf8 input detected." problem. > > This could be enough to put some people off the idea of learning Smalltalk, > which I am sure we all want to avoid. Even if they persevere, the > impression this gives if that either Pharo is a bit flakey or the PBE book > is at fault, or the PBE.image file is bad. Or all of these! > > As an aside, I would very much like to be able to contribute errata notices > and suggestions for improved wording for the PBE book. I have ordered the > hard-copy from Lulu.com and will markup any errors and clarifications as I > progress through the book. Does anyone know if I can log errata etc online > somewhere? > yes: "sbe(a)iam.unibe.ch Example" <sbe(a)iam.unibe.ch>, I have cc'ed them. https://www.iam.unibe.ch/mailman/listinfo/sbe-discussion you can find this in http://pharobyexample.org/ on the right where it says "Resources" and then "Discussion list" cheers mariano > > --Thomas. > -- > View this message in context: > http://forum.world.st/Error-invalid-utf8-input-detected-tp2068483p2266740.h… > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > > _______________________________________________ > Pharo-users mailing list > Pharo-users(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users >

June 24, 2010

Re: [Pharo-users] Error:invalid utf8 input detected.

by Mariano Martinez Peck

On Thu, Jun 24, 2010 at 1:08 PM, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr > wrote: > Mariano can you open a ticket with this problem? > It is already open: http://code.google.com/p/pharo/issues/detail?id=2374 > > On Jun 24, 2010, at 10:07 AM, Mariano Martinez Peck wrote: > > > > > > > On Tue, Jun 22, 2010 at 8:17 PM, tgc05 <thomas(a)costick.net> wrote: > > Hi Stef. I would have thought the VM initialize processing could be > changed to avoid this problem, but I don't know the details :) > > > > > > Hi Thomas. I cope paste here what I said before: > > > > "More in details, the problem is that when you pass an image, it is > interpreted as "SmalltalkImage current getSystemAttribute: 1" > > When you drag a second file (in your case a second image) it is > interpreted as source file, not image, and thus the error with the encoding. > > Put a breakpoint in the method startUpAfterLogin if you want to > experiment a bit. > > > > At least with this, you know why it was the problem and how to avoid it. > Maybe we should raise a better error or even better, if I have already > defined an image in the ini file, but I drag another one, override the first > one and take the dragged one. I will ask in Pharodev mailing list." > > > > So what I recommend you is to put a breakpoint in startUpAfterLogin and > start to play. And let us know what happens. > > > > Thanks > > > > Mariano > > > > > > If the problem cannot be fixed, or if it will take time, it would be good > to have the work-around described in the "Pharo By Example" book. That is, > to comment out or delete the line > "ImageFile=Contents\Resources\Pharo-1.0.image" in Pharo.ini. Without this > fix, a new Smalltalker will hit the error as soon as they try to use the > PBE.image file. > > > > Image file management is one of those things that I like to get a clear > understanding of at an early stage when learning a new dev environment. > > > > --Thomas Costick > > _____________________ > > http://twitter.com/3dbloke > > http://blog.3dbloke.com > > > > > > On 22 June 2010 17:47, StÃ©phane Ducasse [via Smalltalk] <[hidden email]> > wrote: > > thanks thomas. > > This problem was reported on the squeak-vm mailing-list and there is not > much we can do. > > May be I'm wrong. > > > > Stef > > > > On Jun 22, 2010, at 6:38 PM, tgc05 wrote: > > > > > > > > Hi. I just want to let people know that this problem is listed on the > Pharo > > > application issues page at > > > > http://code.google.com/p/pharo/issues/detail?id=2374&q=INI%20FILE&colspec=I… > > > > http://code.google.com/p/pharo/issues/detail?id=2374&q=INI%20FILE&colspec=I… > > > > > > > > Issue 2374: Dragging a .image in a Windows VM raises an error > > > > > > Hope this is fixed soon, since it also affects anyone working through > the > > > early sections of the "Pharo By Example" book. > > > > > > --Thomas. > > > > > > -- > > > View this message in context: > http://forum.world.st/Error-invalid-utf8-input-detected-tp2068483p2264408.h… > > > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > > > > > > _______________________________________________ > > > Pharo-users mailing list > > > [hidden email] > > > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users > > > > > > _______________________________________________ > > Pharo-users mailing list > > [hidden email] > > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users > > > > > > View message @ > http://forum.world.st/Error-invalid-utf8-input-detected-tp2068483p2264434.h… > > To unsubscribe from Re: Error:invalid utf8 input detected., click here. > > > > > > > > View this message in context: Re: Error:invalid utf8 input detected. > > > > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > > > > _______________________________________________ > > Pharo-users mailing list > > Pharo-users(a)lists.gforge.inria.fr > > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users > > > > > > _______________________________________________ > > Pharo-users mailing list > > Pharo-users(a)lists.gforge.inria.fr > > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users > > > _______________________________________________ > Pharo-users mailing list > Pharo-users(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users >

June 24, 2010

Re: [Pharo-users] Error:invalid utf8 input detected.

by Mariano Martinez Peck

> > > I had hoped someone more in touch with > > the Pharo project would be able to fix this. > > Yes the problem is that we should get a PC for that :) > or a "PC". I have my Mac but with VirtualBox and two images: one with Windows XP and other one with ubuntu :) > We will improve > > > Meanwhile, the point I want to emphasise is that this error shows up for > > anyone working through the Pharo By Example book. Right from the start, > the > > book advises the reader to use a different image file from the quick > start > > one provided with Pharo. Doing this, the reader will immediately run > into > > the "Error:invalid utf8 input detected." problem. > > > > This could be enough to put some people off the idea of learning > Smalltalk, > > which I am sure we all want to avoid. Even if they persevere, the > > impression this gives if that either Pharo is a bit flakey or the PBE > book > > is at fault, or the PBE.image file is bad. Or all of these! > > > > As an aside, I would very much like to be able to contribute errata > notices > > and suggestions for improved wording for the PBE book. I have ordered > the > > hard-copy from Lulu.com and will markup any errors and clarifications as > I > > progress through the book. Does anyone know if I can log errata etc > online > > somewhere? > > > normally on the pharo by example web site > else send that to the discussion list there. > > Stef > > > > --Thomas. > > -- > > View this message in context: > http://forum.world.st/Error-invalid-utf8-input-detected-tp2068483p2266740.h… > > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > > > > _______________________________________________ > > Pharo-users mailing list > > Pharo-users(a)lists.gforge.inria.fr > > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users > > > _______________________________________________ > Pharo-users mailing list > Pharo-users(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users >

June 24, 2010

Re: [Pharo-users] Error:invalid utf8 input detected.

by StÃ©phane Ducasse

Mariano can you open a ticket with this problem? On Jun 24, 2010, at 10:07 AM, Mariano Martinez Peck wrote: > > > On Tue, Jun 22, 2010 at 8:17 PM, tgc05 <thomas(a)costick.net> wrote: > Hi Stef. I would have thought the VM initialize processing could be changed to avoid this problem, but I don't know the details :) > > > Hi Thomas. I cope paste here what I said before: > > "More in details, the problem is that when you pass an image, it is interpreted as "SmalltalkImage current getSystemAttribute: 1" > When you drag a second file (in your case a second image) it is interpreted as source file, not image, and thus the error with the encoding. > Put a breakpoint in the method startUpAfterLogin if you want to experiment a bit. > > At least with this, you know why it was the problem and how to avoid it. Maybe we should raise a better error or even better, if I have already defined an image in the ini file, but I drag another one, override the first one and take the dragged one. I will ask in Pharodev mailing list." > > So what I recommend you is to put a breakpoint in startUpAfterLogin and start to play. And let us know what happens. > > Thanks > > Mariano > > > If the problem cannot be fixed, or if it will take time, it would be good to have the work-around described in the "Pharo By Example" book. That is, to comment out or delete the line "ImageFile=Contents\Resources\Pharo-1.0.image" in Pharo.ini. Without this fix, a new Smalltalker will hit the error as soon as they try to use the PBE.image file. > > Image file management is one of those things that I like to get a clear understanding of at an early stage when learning a new dev environment. > > --Thomas Costick > _____________________ > http://twitter.com/3dbloke > http://blog.3dbloke.com > > > On 22 June 2010 17:47, StÃ©phane Ducasse [via Smalltalk] <[hidden email]> wrote: > thanks thomas. > This problem was reported on the squeak-vm mailing-list and there is not much we can do. > May be I'm wrong. > > Stef > > On Jun 22, 2010, at 6:38 PM, tgc05 wrote: > > > > > Hi. I just want to let people know that this problem is listed on the Pharo > > application issues page at > > http://code.google.com/p/pharo/issues/detail?id=2374&q=INI%20FILE&colspec=I… > > http://code.google.com/p/pharo/issues/detail?id=2374&q=INI%20FILE&colspec=I… > > > > > Issue 2374: Dragging a .image in a Windows VM raises an error > > > > Hope this is fixed soon, since it also affects anyone working through the > > early sections of the "Pharo By Example" book. > > > > --Thomas. > > > > -- > > View this message in context: http://forum.world.st/Error-invalid-utf8-input-detected-tp2068483p2264408.h… > > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > > > > _______________________________________________ > > Pharo-users mailing list > > [hidden email] > > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users > > > _______________________________________________ > Pharo-users mailing list > [hidden email] > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users > > > View message @ http://forum.world.st/Error-invalid-utf8-input-detected-tp2068483p2264434.h… > To unsubscribe from Re: Error:invalid utf8 input detected., click here. > > > > View this message in context: Re: Error:invalid utf8 input detected. > > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > > _______________________________________________ > Pharo-users mailing list > Pharo-users(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users > > > _______________________________________________ > Pharo-users mailing list > Pharo-users(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users

June 24, 2010

Re: [Pharo-users] Error:invalid utf8 input detected.

by StÃ©phane Ducasse

On Jun 24, 2010, at 12:46 PM, tgc05 wrote: > > Hi Mariano. Thanks for this. I'm new to Pharo and have been away from > Smalltalk for several years (way too long), so right now I am not ready to > start debugging the code; perhaps I will return to this when I have > recovered my "Smalltalk legs" :) the debugger is your best friend do not close it. But I understand your current problem > I had hoped someone more in touch with > the Pharo project would be able to fix this. Yes the problem is that we should get a PC for that :) We will improve > Meanwhile, the point I want to emphasise is that this error shows up for > anyone working through the Pharo By Example book. Right from the start, the > book advises the reader to use a different image file from the quick start > one provided with Pharo. Doing this, the reader will immediately run into > the "Error:invalid utf8 input detected." problem. > > This could be enough to put some people off the idea of learning Smalltalk, > which I am sure we all want to avoid. Even if they persevere, the > impression this gives if that either Pharo is a bit flakey or the PBE book > is at fault, or the PBE.image file is bad. Or all of these! > > As an aside, I would very much like to be able to contribute errata notices > and suggestions for improved wording for the PBE book. I have ordered the > hard-copy from Lulu.com and will markup any errors and clarifications as I > progress through the book. Does anyone know if I can log errata etc online > somewhere? normally on the pharo by example web site else send that to the discussion list there. Stef > > --Thomas. > -- > View this message in context: http://forum.world.st/Error-invalid-utf8-input-detected-tp2068483p2266740.h… > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. > > _______________________________________________ > Pharo-users mailing list > Pharo-users(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users

June 24, 2010

Re: [Pharo-users] Error:invalid utf8 input detected.

by tgc05

Hi Mariano. Thanks for this. I'm new to Pharo and have been away from Smalltalk for several years (way too long), so right now I am not ready to start debugging the code; perhaps I will return to this when I have recovered my "Smalltalk legs" :) I had hoped someone more in touch with the Pharo project would be able to fix this. Meanwhile, the point I want to emphasise is that this error shows up for anyone working through the Pharo By Example book. Right from the start, the book advises the reader to use a different image file from the quick start one provided with Pharo. Doing this, the reader will immediately run into the "Error:invalid utf8 input detected." problem. This could be enough to put some people off the idea of learning Smalltalk, which I am sure we all want to avoid. Even if they persevere, the impression this gives if that either Pharo is a bit flakey or the PBE book is at fault, or the PBE.image file is bad. Or all of these! As an aside, I would very much like to be able to contribute errata notices and suggestions for improved wording for the PBE book. I have ordered the hard-copy from Lulu.com and will markup any errors and clarifications as I progress through the book. Does anyone know if I can log errata etc online somewhere? --Thomas. -- View this message in context: http://forum.world.st/Error-invalid-utf8-input-detected-tp2068483p2266742.h… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

June 24, 2010

Re: [Pharo-users] Error:invalid utf8 input detected.

by tgc05

Hi Mariano. Thanks for this. I'm new to Pharo and have been away from Smalltalk for several years (way too long), so right now I am not ready to start debugging the code; perhaps I will return to this when I have recovered my "Smalltalk legs" :) I had hoped someone more in touch with the Pharo project would be able to fix this. Meanwhile, the point I want to emphasise is that this error shows up for anyone working through the Pharo By Example book. Right from the start, the book advises the reader to use a different image file from the quick start one provided with Pharo. Doing this, the reader will immediately run into the "Error:invalid utf8 input detected." problem. This could be enough to put some people off the idea of learning Smalltalk, which I am sure we all want to avoid. Even if they persevere, the impression this gives if that either Pharo is a bit flakey or the PBE book is at fault, or the PBE.image file is bad. Or all of these! As an aside, I would very much like to be able to contribute errata notices and suggestions for improved wording for the PBE book. I have ordered the hard-copy from Lulu.com and will markup any errors and clarifications as I progress through the book. Does anyone know if I can log errata etc online somewhere? --Thomas. -- View this message in context: http://forum.world.st/Error-invalid-utf8-input-detected-tp2068483p2266740.h… Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com.

June 24, 2010

Re: [Pharo-users] VM/Settings for Deploy

by laurent laffont

On Thu, Jun 24, 2010 at 10:03 AM, Mariano Martinez Peck < marianopeck(a)gmail.com> wrote: > > > On Wed, Jun 23, 2010 at 11:03 AM, Sven Van Caekenberghe <sven(a)beta9.be>wrote: > >> Hi, >> >> I am very happy that I managed to create a very small deploy image based >> on Pharo-1.1-11400-rc2. This image contains all of Seaside and >> Glorp/PostgreSQL and is still only about 12Mb. All this thanks to >> ScriptLoader's #cleanUpForProduction. >> >> Thanks a lot to all who made this possible. >> >> I noticed however that this image is handling my HTTP/Seaside benchmark >> consistenly faster on my Mac, about 80 to 85 req/s (Mac OS X 10.6.4, 2.4 Ghz >> Intel Core 2 Duo with 4GB RAM) than on my server (RHEL 4 (update 7), 2 Ghz >> AMD Opteron 175 Dual Core with 4GB RAM), about 55 to 65 req/s. >> >> On my Mac I use the Squeak 4.2.4beta1U VM, on my server the >> Squeak-4.0.3.2202 Unix VM. >> >> Next I tried the Squeak-4.0.3.2202 VM on my Mac. This resulted in about 60 >> to 70 req/s. >> >> Is it normal that the Unix VM is slower than the Mac VM ? >> > Hi, I've struggled on this and finally give up. It seems Linux VM can be better than MacOSX one: - http://forum.world.st/Squeak-VM-FT2Plugin-all-Pharo-1-0-rc3-tests-green-tp1… - http://forum.world.st/Squeak-VM-FT2Plugin-all-Pharo-1-0-rc3-tests-green-tp1… But how is a secret: http://forum.world.st/Squeak-VM-FT2Plugin-all-Pharo-1-0-rc3-tests-green-tp1… I will help if you work on building the VM for Linux. Cheers, Laurent Laffont http://pharocasts.blogspot.com/ http://magaloma.blogspot.com/ > > > For what I have been experimenting, and with the default configuration, > yes. > I mean, if you go to the website, download both VMs, and run, I think that > yes. Maybe compiling Linux vms with particular flags in the configure, you > may have better results. > > I said this in another thread I people said I was talking bullship, so, I > won't talk any more. > > I let you two links in case you are interested to read: > > > http://forum.world.st/Pharo-apparently-slow-on-linux-td1304643.html#a1304643 > > > http://forum.world.st/Squeak-VM-FT2Plugin-all-Pharo-1-0-rc3-tests-green-tp1… > > > >> Shouldn't a Linux server box be faster at networking/IO/CPU than a MacBook >> Pro running the full Mac OS X GUI ? >> > > > not necessary. Because you depends on the VM I think. > > > >> >> Is there anything simple (low hanging fruit kind of stuff) that I can do >> to improve performance, either using command line options to the VM or using >> settings at the image level ? >> > > > yes. First the flags when compiling the VM. Check the version of GCC. > Then you can check all the parameters of the GC and etc...but I have no > idea how to tune this. > > >> I currently run the VM with: >> >> Squeak-4.0.3.2202-linux_i386/bin/squeak -vm-display-null >> -vm-sound-null deploy.image >> >> What are others using in the Seaside deploy area ? >> >> Thanks, >> >> Sven >> >> >> _______________________________________________ >> Pharo-users mailing list >> Pharo-users(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users >> > > > _______________________________________________ > Pharo-users mailing list > Pharo-users(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users > >

June 24, 2010

Re: [Pharo-users] Error:invalid utf8 input detected.

by Mariano Martinez Peck

On Tue, Jun 22, 2010 at 8:17 PM, tgc05 <thomas(a)costick.net> wrote: > Hi Stef. I would have thought the VM initialize processing could be > changed to avoid this problem, but I don't know the details :) > > Hi Thomas. I cope paste here what I said before: "More in details, the problem is that when you pass an image, it is interpreted as "SmalltalkImage current getSystemAttribute: 1" When you drag a second file (in your case a second image) it is interpreted as source file, not image, and thus the error with the encoding. Put a breakpoint in the method startUpAfterLogin if you want to experiment a bit. At least with this, you know why it was the problem and how to avoid it. Maybe we should raise a better error or even better, if I have already defined an image in the ini file, but I drag another one, override the first one and take the dragged one. I will ask in Pharodev mailing list." So what I recommend you is to put a breakpoint in startUpAfterLogin and start to play. And let us know what happens. Thanks Mariano > If the problem cannot be fixed, or if it will take time, it would be good > to have the work-around described in the "*Pharo By Example*" book. That > is, to comment out or delete the line " > ImageFile=Contents\Resources\Pharo-1.0.image" in Pharo.ini. Without this > fix, a new Smalltalker will hit the error as soon as they try to use the > PBE.image file. > > Image file management is one of those things that I like to get a clear > understanding of at an early stage when learning a new dev environment. > > --Thomas Costick > _____________________ > http://twitter.com/3dbloke > http://blog.3dbloke.com <http://blog.3dbloke.com?by-user=t> > > > On 22 June 2010 17:47, StÃ©phane Ducasse [via Smalltalk] <[hidden email]<http://user/SendEmail.jtp?type=node&node=2264560&i=0> > > wrote: > >> thanks thomas. >> This problem was reported on the squeak-vm mailing-list and there is not >> much we can do. >> May be I'm wrong. >> >> Stef >> >> On Jun 22, 2010, at 6:38 PM, tgc05 wrote: >> >> > >> > Hi. I just want to let people know that this problem is listed on the >> Pharo >> > application issues page at >> > >> http://code.google.com/p/pharo/issues/detail?id=2374&q=INI%20FILE&colspec=I… >> > >> http://code.google.com/p/pharo/issues/detail?id=2374&q=INI%20FILE&colspec=I… >> >> >> > >> > Issue 2374: Dragging a .image in a Windows VM raises an error >> > >> > Hope this is fixed soon, since it also affects anyone working through >> the >> > early sections of the "Pharo By Example" book. >> > >> > --Thomas. >> > >> > -- >> > View this message in context: >> http://forum.world.st/Error-invalid-utf8-input-detected-tp2068483p2264408.h…<http://forum.world.st/Error-invalid-utf8-input-detected-tp2068483p2264408.h…> >> > Sent from the Pharo Smalltalk Users mailing list archive at Nabble.com. >> > >> > _______________________________________________ >> > Pharo-users mailing list >> > [hidden email] <http://user/SendEmail.jtp?type=node&node=2264434&i=0> >> > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users >> >> >> _______________________________________________ >> Pharo-users mailing list >> [hidden email] <http://user/SendEmail.jtp?type=node&node=2264434&i=1> >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users >> >> >> ------------------------------ >> View message @ >> http://forum.world.st/Error-invalid-utf8-input-detected-tp2068483p2264434.h…<http://forum.world.st/Error-invalid-utf8-input-detected-tp2068483p2264434.h…> >> To unsubscribe from Re: Error:invalid utf8 input detected., click here. >> >> > > ------------------------------ > View this message in context: Re: Error:invalid utf8 input detected.<http://forum.world.st/Error-invalid-utf8-input-detected-tp2068483p2264560.h…> > > Sent from the Pharo Smalltalk Users mailing list archive<http://forum.world.st/Pharo-Smalltalk-Users-f1310670.html>at Nabble.com. > > _______________________________________________ > Pharo-users mailing list > Pharo-users(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users > >

June 24, 2010

Re: [Pharo-users] VM/Settings for Deploy

by Mariano Martinez Peck

On Wed, Jun 23, 2010 at 11:03 AM, Sven Van Caekenberghe <sven(a)beta9.be>wrote: > Hi, > > I am very happy that I managed to create a very small deploy image based on > Pharo-1.1-11400-rc2. This image contains all of Seaside and Glorp/PostgreSQL > and is still only about 12Mb. All this thanks to ScriptLoader's > #cleanUpForProduction. > > Thanks a lot to all who made this possible. > > I noticed however that this image is handling my HTTP/Seaside benchmark > consistenly faster on my Mac, about 80 to 85 req/s (Mac OS X 10.6.4, 2.4 Ghz > Intel Core 2 Duo with 4GB RAM) than on my server (RHEL 4 (update 7), 2 Ghz > AMD Opteron 175 Dual Core with 4GB RAM), about 55 to 65 req/s. > > On my Mac I use the Squeak 4.2.4beta1U VM, on my server the > Squeak-4.0.3.2202 Unix VM. > > Next I tried the Squeak-4.0.3.2202 VM on my Mac. This resulted in about 60 > to 70 req/s. > > Is it normal that the Unix VM is slower than the Mac VM ? > For what I have been experimenting, and with the default configuration, yes. I mean, if you go to the website, download both VMs, and run, I think that yes. Maybe compiling Linux vms with particular flags in the configure, you may have better results. I said this in another thread I people said I was talking bullship, so, I won't talk any more. I let you two links in case you are interested to read: http://forum.world.st/Pharo-apparently-slow-on-linux-td1304643.html#a1304643 http://forum.world.st/Squeak-VM-FT2Plugin-all-Pharo-1-0-rc3-tests-green-tp1… > Shouldn't a Linux server box be faster at networking/IO/CPU than a MacBook > Pro running the full Mac OS X GUI ? > not necessary. Because you depends on the VM I think. > > Is there anything simple (low hanging fruit kind of stuff) that I can do to > improve performance, either using command line options to the VM or using > settings at the image level ? > yes. First the flags when compiling the VM. Check the version of GCC. Then you can check all the parameters of the GC and etc...but I have no idea how to tune this. > I currently run the VM with: > > Squeak-4.0.3.2202-linux_i386/bin/squeak -vm-display-null > -vm-sound-null deploy.image > > What are others using in the Seaside deploy area ? > > Thanks, > > Sven > > > _______________________________________________ > Pharo-users mailing list > Pharo-users(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-users >

June 24, 2010