March 2014 - Pharo-dev - lists.pharo.org

Re: [Pharo-dev] Please add me to PharoExtras

by Damien Cassou

done On Mon, Mar 17, 2014 at 10:42 AM, Stephan Eggermont <stephan(a)stack.nl> wrote: > So I can save a working version of ConfigurationOfXMLSupport > (it cannot load XMLWriter, due to a missing mc) > > Stephan > -- Damien Cassou http://damiencassou.seasidehosting.st "Success is the ability to go from one failure to another without losing enthusiasm." Winston Churchill

March 17, 2014

Re: [Pharo-dev] Roassal 3D empty windows

by Ronie Salgado

Hi Nicolai, What are your system specs?, specially your graphic card. Roassal3D requires a graphic card with at least OpenGL 2.0 support. Try updating your graphic drivers Greetings, Ronie 2014-03-17 11:03 GMT-03:00 Alexandre Bergel <alexandre.bergel(a)me.com>: > Oh... Have you tried to update Athens and NBOpenGL ? Maybe you are using an > old version of them. > Maybe an old version of OpenGL is installed on your Window? > > Ronie, any idea what's going on? > > Alexandre > > > On Mar 17, 2014, at 10:55 AM, Nicolai Hess <nicolaihess(a)web.de> wrote: > > > Thank you Alexandre, > > this was what I tried under windows, (I wasn't sure if this is still the > right way to do it, I > > read it the Roassal3dTutorial.pdf). > > But it doesn't work. Either I am getting empty windows or (with an other > > NBOpenGL version) > > Frame buffer is incomplete: GL_FRAMEBUFFER_UNSUPPORTED') > > > > I tried this once with linux too, and it didn't worked. But I am not > sure how long ago :) > > I'll try it again and report back. > > > > (Another note, after downloading the configuration, this: > > (Smalltalk at: #ConfigurationOfRoassal3d) loadDevelopment > > takes awfully long on windows (~ 5 min). > > I am sure it was much faster on linux, any idea how that can be?) > > > > > > > > > > > > > > 2014-03-17 14:34 GMT+01:00 Alexandre Bergel <alexandre.bergel(a)me.com>: > > Hi Nicolai, > > > > Roassal3d works well with the last Pharo 3.0. > > You just need to execute the following incantation: > > > > -=-=-=-=-=-=-=-=-= > > Gofer new smalltalkhubUser: 'ronsaldo' project: 'roassal3d'; package: > 'ConfigurationOfRoassal3d'; load. (Smalltalk at: #ConfigurationOfRoassal3d) > loadDevelopment > > -=-=-=-=-=-=-=-=-= > > > > This does not work for you? > > It works well on OSX and on Linux > > > > Alexandre > > > > > > On Mar 15, 2014, at 10:52 AM, Nicolai Hess <nicolaihess(a)web.de> wrote: > > > > > Hi, > > > > > > what could be the reason, that any Roassal3d example from the > > > Roassal3DTutorial.pdf only shows white empty windows? > > > > > > I loaded ConfigurationOfRoassal3d-RonieSalgado.10 and > > > (Smalltalk at: > > > #ConfigurationOfRoassal3d) loadDevelopment > > > > > > Any ideas? > > > > > > > > > regards > > > Nicolai > > > > > > > -- > > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > > Alexandre Bergel http://www.bergel.eu > > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > > > > > > > > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre Bergel http://www.bergel.eu > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > >

March 17, 2014

Re: [Pharo-dev] pharo sound should be working

by Esteban Lorenzano

can you check with the latest vm now? btwâ¦ you need to install: sudo apt-get install libasound2-plugins:i386 in order to prevent warnings. On 15 Mar 2014, at 00:03, Nicolai Hess <nicolaihess(a)web.de> wrote: > 2014-03-14 21:43 GMT+01:00 Esteban Lorenzano <estebanlm(a)gmail.com>: > Hi, > > so I committed some changes to allow soundplugin to work on the pharovm. > can you please download and test in your platforms? > > Works on windows > > > > (remember, in linux you need libasound2 dependency installed) > > it does not work on linux Ubuntu 12.04.2 LTS > (I have installed libasound2). > > Why don't we include the pulse config again and build the vm-sound-pulse module as well? > As I described it in the issue 12493, vm-sound-oss is buildable too. But current > linux distribution don't provide the older OSS sound system. > (it worked for me with ubuntu 10.04 but not with 12.04) > > > cheers, > Esteban > >

March 17, 2014

Re: [Pharo-dev] NBOpenGL on Windows

by Igor Stasenko

On 17 March 2014 12:13, Nicolai Hess <nicolaihess(a)web.de> wrote: > > 2014-03-17 11:49 GMT+01:00 Igor Stasenko <siguctua(a)gmail.com>: > > https://ci.inria.fr/pharo-contribution/job/NBOpenGL/ >> >> >> On 16 March 2014 00:02, Nicolai Hess <nicolaihess(a)web.de> wrote: >> >>> Is there a working version (maybe with examples) >>> for NBOpenGL on Windows? >>> >>> >>> >> >> >> -- >> Best regards, >> Igor Stasenko. >> > > > Thank you Igor, > > now the question is, what to do with this? > It looks like the same version I would get on installing Roassal3D, which > doesn't > work (all windows are empty). > > Running > GLViewportMorph new openInWorld > or > GLTTRenderingDemo new openInWorld > results in an error > NBGLFrameBuffer(Object)>>error: > 'Frame buffer is incomplete: GL_FRAMEBUFFER_UNSUPPORTED' > > so your graphics card/driver don't supports requested configuration of framebuffer used in demo. all you have to do is to implement own, which will work on your machine. since you got that message, the NBOpenGL works fine. > > Nicolai > > > > -- Best regards, Igor Stasenko.

March 17, 2014

Re: [Pharo-dev] Roassal 3D empty windows

by Alexandre Bergel

Ohâ¦ Have you tried to update Athens and NBOpenGL ? Maybe you are using an old version of them. Maybe an old version of OpenGL is installed on your Window? Ronie, any idea whatâs going on? Alexandre On Mar 17, 2014, at 10:55 AM, Nicolai Hess <nicolaihess(a)web.de> wrote: > Thank you Alexandre, > this was what I tried under windows, (I wasn't sure if this is still the right way to do it, I > read it the Roassal3dTutorial.pdf). > But it doesn't work. Either I am getting empty windows or (with an other > NBOpenGL version) > Frame buffer is incomplete: GL_FRAMEBUFFER_UNSUPPORTED') > > I tried this once with linux too, and it didn't worked. But I am not sure how long ago :) > I'll try it again and report back. > > (Another note, after downloading the configuration, this: > (Smalltalk at: #ConfigurationOfRoassal3d) loadDevelopment > takes awfully long on windows (~ 5 min). > I am sure it was much faster on linux, any idea how that can be?) > > > > > > > 2014-03-17 14:34 GMT+01:00 Alexandre Bergel <alexandre.bergel(a)me.com>: > Hi Nicolai, > > Roassal3d works well with the last Pharo 3.0. > You just need to execute the following incantation: > > -=-=-=-=-=-=-=-=-= > Gofer new smalltalkhubUser: 'ronsaldo' project: 'roassal3d'; package: 'ConfigurationOfRoassal3d'; load. (Smalltalk at: #ConfigurationOfRoassal3d) loadDevelopment > -=-=-=-=-=-=-=-=-= > > This does not work for you? > It works well on OSX and on Linux > > Alexandre > > > On Mar 15, 2014, at 10:52 AM, Nicolai Hess <nicolaihess(a)web.de> wrote: > > > Hi, > > > > what could be the reason, that any Roassal3d example from the > > Roassal3DTutorial.pdf only shows white empty windows? > > > > I loaded ConfigurationOfRoassal3d-RonieSalgado.10 and > > (Smalltalk at: > > #ConfigurationOfRoassal3d) loadDevelopment > > > > Any ideas? > > > > > > regards > > Nicolai > > > > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre Bergel http://www.bergel.eu > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > > -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.

March 17, 2014

Re: [Pharo-dev] Roassal 3D empty windows

by Nicolai Hess

Thank you Alexandre, this was what I tried under windows, (I wasn't sure if this is still the right way to do it, I read it the Roassal3dTutorial.pdf). But it doesn't work. Either I am getting empty windows or (with an other NBOpenGL version) Frame buffer is incomplete: GL_FRAMEBUFFER_UNSUPPORTED') I tried this once with linux too, and it didn't worked. But I am not sure how long ago :) I'll try it again and report back. (Another note, after downloading the configuration, this: (Smalltalk at: #ConfigurationOfRoassal3d) loadDevelopment takes awfully long on windows (~ 5 min). I am sure it was much faster on linux, any idea how that can be?) 2014-03-17 14:34 GMT+01:00 Alexandre Bergel <alexandre.bergel(a)me.com>: > Hi Nicolai, > > Roassal3d works well with the last Pharo 3.0. > You just need to execute the following incantation: > > -=-=-=-=-=-=-=-=-= > Gofer new smalltalkhubUser: 'ronsaldo' project: 'roassal3d'; package: > 'ConfigurationOfRoassal3d'; load. (Smalltalk at: #ConfigurationOfRoassal3d) > loadDevelopment > -=-=-=-=-=-=-=-=-= > > This does not work for you? > It works well on OSX and on Linux > > Alexandre > > > On Mar 15, 2014, at 10:52 AM, Nicolai Hess <nicolaihess(a)web.de> wrote: > > > Hi, > > > > what could be the reason, that any Roassal3d example from the > > Roassal3DTutorial.pdf only shows white empty windows? > > > > I loaded ConfigurationOfRoassal3d-RonieSalgado.10 and > > (Smalltalk at: > > #ConfigurationOfRoassal3d) loadDevelopment > > > > Any ideas? > > > > > > regards > > Nicolai > > > > -- > _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: > Alexandre Bergel http://www.bergel.eu > ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;. > > > >

March 17, 2014

Re: [Pharo-dev] WhatsUp from: 2014-03-17 until: 2014-03-31

by Esteban Lorenzano

On 17 Mar 2014, at 07:00, seaside(a)rmod.lille.inria.fr wrote: > Hi! We're sending this automatic email twice a month, to give the community an opportunity to easily know what's happening and to coordinate efforts. Just answer informally, and feel free to spawn discussions thereafter! > > ### Here's what I've been up to since the last WhatsUp: > > - $HEROIC_ACHIEVEMENTS_OR_DISMAL_FAILURES_OR_SIMPLE_BORING_NECESSARY_TASKS - preparing vm for release pharo3 > > ### What's next, until 2014-03-31 (*): > > - $NEXT_STEPS_TOWARDS_WORLD_DOMINATION - prepare pharo3 for release :) > > (*) we'll be expecting results by then ;) >

March 17, 2014

Re: [Pharo-dev] WhatsUp from: 2014-03-17 until: 2014-03-31

by Ben Coman

seaside(a)rmod.lille.inria.fr wrote: > Hi! We're sending this automatic email twice a month, to give the community an opportunity to easily know what's happening and to coordinate efforts. Just answer informally, and feel free to spawn discussions thereafter! > > ### Here's what I've been up to since the last WhatsUp: * Had a dozen or so bug fixes integrated. Surprised myself by how far I could dig into the system and it still made sense. I've learnt a lot about corners of the system I'd normally never poke around in. Its been fun. > ### What's next, until 2014-03-31 (*): > > Squash more bugs.

March 17, 2014

Re: [Pharo-dev] Roassal 3D empty windows

by Alexandre Bergel

Hi Nicolai, Roassal3d works well with the last Pharo 3.0. You just need to execute the following incantation: -=-=-=-=-=-=-=-=-= Gofer new smalltalkhubUser: 'ronsaldo' project: 'roassal3d'; package: 'ConfigurationOfRoassal3d'; load. (Smalltalk at: #ConfigurationOfRoassal3d) loadDevelopment -=-=-=-=-=-=-=-=-= This does not work for you? It works well on OSX and on Linux Alexandre On Mar 15, 2014, at 10:52 AM, Nicolai Hess <nicolaihess(a)web.de> wrote: > Hi, > > what could be the reason, that any Roassal3d example from the > Roassal3DTutorial.pdf only shows white empty windows? > > I loaded ConfigurationOfRoassal3d-RonieSalgado.10 and > (Smalltalk at: > #ConfigurationOfRoassal3d) loadDevelopment > > Any ideas? > > > regards > Nicolai > -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.

March 17, 2014

Re: [Pharo-dev] NBOpenGL on Windows

by Igor Stasenko

https://ci.inria.fr/pharo-contribution/job/NBOpenGL/ On 16 March 2014 00:02, Nicolai Hess <nicolaihess(a)web.de> wrote: > Is there a working version (maybe with examples) > for NBOpenGL on Windows? > > > -- Best regards, Igor Stasenko.

March 17, 2014