March 2009 - Pharo-dev - lists.pharo.org

Re: [Pharo-project] about closures integration

by Michael Roberts

I've been offline for a bit but my thoughts would be to go for it and to do it with the current single stream. After all pharo is in progress. Unless someone counters I'm not sure there is time to do this in parallel. If you agree then I would also suggest keeping the milestone page in sync. Cheers Mike On 3/16/09, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: > ok I will try this evening. > > Stef > > On Mar 16, 2009, at 10:16 AM, Damien Cassou wrote: > >> On Sun, Mar 15, 2009 at 10:32 AM, StÃ©phane Ducasse >> <stephane.ducasse(a)inria.fr> wrote: >>> what is the case for the linux and windows one? >> >> Give me an image or the steps to make one and I will tell you if it >> works. The Exupery VM works fine and I use it everyday. >> >> -- >> Damien Cassou >> http://damiencassou.seasidehosting.st >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

March 17, 2009

Re: [Pharo-project] about web site

by Michael Roberts

It's on the web site. I don't understand. It's minimal for sure... On 3/17/09, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: > I just realized that nowehere it was mentioned who was in the > community and the board > > Stef > On Mar 17, 2009, at 2:32 PM, Michael Roberts wrote: > >> Hi stef >> We have had a small section under about/organization for a while I >> think. Is this enough? >> Mike >> On 3/12/09, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: >>> may be we should add a little point explaining that there is a (non- >>> elected) board and a community.... >>> >>> Stef >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

March 17, 2009

Re: [Pharo-project] World Graphics and Halos

by Rob Rothwell

Well...it worked! Steph...do you need any/all of the changes that have been put out packaged up? I am thinking of the SketchMorphRepainting, and the HaloMorphRefactoring... There was also a PluggableTextMorph-scrollSelectionIntoView from a week or more ago that scrolls the editor when you try to highlight beyond the size of the window... Take care, Rob 2009/3/17 Gary Chambers <gazzaguru2(a)btinternet.com> > Bitter experience! > > Regards, Gary > > ----- Original Message ----- > *From:* Rob Rothwell <r.j.rothwell(a)gmail.com> > *To:* Pharo-project(a)lists.gforge.inria.fr > *Sent:* Tuesday, March 17, 2009 11:49 AM > *Subject:* Re: [Pharo-project] World Graphics and Halos > > How do you guys KNOW this stuff???! > > Rob > > 2009/3/17 Gary Chambers <gazzaguru2(a)btinternet.com> > >> Try this one ;-) >> >> Regards, Gary >> >> ----- Original Message ----- From: "StÃ©phane Ducasse" < >> stephane.ducasse(a)inria.fr> >> To: <Pharo-project(a)lists.gforge.inria.fr> >> Sent: Tuesday, March 17, 2009 10:19 AM >> >> Subject: Re: [Pharo-project] World Graphics and Halos >> >> >> do you have a nice little cs :) >> >> Stef >> >> On Mar 17, 2009, at 11:09 AM, Gary Chambers wrote: >> >> If we are going to use the optimised general case in Morph (a valid >>> thing to do given the default drawOn: implementation) then I guess >>> we need to check all implementors of drawOn: to do a proper >>> areasRemainingToFill: if they are not standard and have non-opaque >>> regions. >>> >>> Changing HaloMorph>>defaultColor to answer Color transparent fixes >>> this one... In fact, for HaloMorph, #borderWidth should be overriden >>> with the showBoundsInHalo/World logic and #defaultBorderColor to >>> return Preferences menuSelectionColor. #drawOn: can then be removed. >>> >>> Regards, Gary >>> ----- Original Message ----- >>> From: Rob Rothwell >>> To: Pharo-project(a)lists.gforge.inria.fr >>> Sent: Monday, March 16, 2009 7:39 PM >>> Subject: Re: [Pharo-project] World Graphics and Halos >>> >>> Yes... >>> >>> Preferences resetHaloSpecifications "works," but notice that when >>> selecting a "plain old" Morph (like Morph new), it is overwritten by >>> the background color... >>> >>> Rob >>> >>> On Mon, Mar 16, 2009 at 3:20 PM, StÃ©phane Ducasse < >>> stephane.ducasse(a)inria.fr >>> > wrote: >>> Ok I got it and I opened an issue. >>> >>> Stef >>> >>> On Mar 16, 2009, at 11:52 AM, Gary Chambers wrote: >>> >>> > Not one of mine... >>> > The halo item in question is the addPaintBgdHandle which is still >>> > present in >>> > the images but removed. >>> > Preferences resetHaloSpecifications needs to be invoked. >>> > >>> > Regards, Gary >>> > >>> > ----- Original Message ----- >>> > From: "StÃ©phane Ducasse" <stephane.ducasse(a)inria.fr> >>> > To: <Pharo-project(a)lists.gforge.inria.fr> >>> > Sent: Monday, March 16, 2009 10:12 AM >>> > Subject: Re: [Pharo-project] World Graphics and Halos >>> > >>> > >>> >> Once you arrive to a fix point >>> >> let me know what I should integrate. >>> >> Stef >>> >> >>> >> On Mar 15, 2009, at 12:24 PM, Gary Chambers wrote: >>> >> >>> >>> I noticed the halo problem in the dev image too. Resetting the >>> halo >>> >>> specs is needed since one has been removed... >>> >>> >>> >>> Regards, Gary >>> >>> ----- Original Message ----- >>> >>> From: Rob Rothwell >>> >>> To: Pharo-project(a)lists.gforge.inria.fr >>> >>> Sent: Saturday, March 14, 2009 11:35 PM >>> >>> Subject: Re: [Pharo-project] World Graphics and Halos >>> >>> >>> >>> Yep...that seemed to fix it! >>> >>> >>> >>> Now if I could just figure out how to remove a Morph from the >>> World >>> >>> without Halos! >>> >>> >>> >>> If I do System->About it is so big now that it won't all fit on my >>> >>> screen, so I can't reach the ok button to close it and I am stuck >>> >>> with it! >>> >>> >>> >>> Rob >>> >>> >>> >>> On Sat, Mar 14, 2009 at 7:11 PM, Henrik Sperre Johansen >>> >>> <henrik.s.johansen(a)veloxit.no >>> >>>> wrote: >>> >>> Attached a .cs to the issue with a fix, also including the >>> solution >>> >>> Gary suggested for the taskbar-issue that was reported. >>> >>> (I don't know how to remove methods in .cs files, and haven't yet >>> >>> gotten around to learn how to make slices, so >>> >>> BorderedMorph>>areasRemainingToFill: would have to be removed by >>> >>> hand..) >>> >>> >>> >>> Cheers, >>> >>> Henry >>> >>> >>> >>> On 14.03.2009 22:04, Rob Rothwell wrote: >>> >>>> >>> >>>> Done. >>> >>>> >>> >>>> Issues 655 >>> >>>> >>> >>>> On Mar 14, 2009, at 8:14 PM, Rob Rothwell wrote: >>> >>>> >>> >>>>> Hi all, >>> >>>>> >>> >>>>> Open up a 10250 dev image and click anywhere within the bounds >>> of >>> >>>>> the "Pharo" graphic. >>> >>>>> >>> >>>>> The world menu pops up and leaves part of itself behind when you >>> >>>>> click somewhere else on the screen. >>> >>> >>> >>> >>> >>> _______________________________________________ >>> >>> Pharo-project mailing list >>> >>> Pharo-project(a)lists.gforge.inria.fr >>> >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo- >>> project >>> >>> >>> >>> >>> >>> >>> >>> _______________________________________________ >>> >>> Pharo-project mailing list >>> >>> Pharo-project(a)lists.gforge.inria.fr >>> >>> >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project________… >>> >>> Pharo-project mailing list >>> >>> Pharo-project(a)lists.gforge.inria.fr >>> >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo- >>> project >>> >> >>> >> >>> >> _______________________________________________ >>> >> Pharo-project mailing list >>> >> Pharo-project(a)lists.gforge.inria.fr >>> >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> > >>> > >>> > _______________________________________________ >>> > Pharo-project mailing list >>> > Pharo-project(a)lists.gforge.inria.fr >>> > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> > >>> >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >>> >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project________… >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > ------------------------------ > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

March 17, 2009

Re: [Pharo-project] about web site

by StÃ©phane Ducasse

I just realized that nowehere it was mentioned who was in the community and the board Stef On Mar 17, 2009, at 2:32 PM, Michael Roberts wrote: > Hi stef > We have had a small section under about/organization for a while I > think. Is this enough? > Mike > On 3/12/09, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: >> may be we should add a little point explaining that there is a (non- >> elected) board and a community.... >> >> Stef >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

March 17, 2009

Re: [Pharo-project] World Graphics and Halos

by Gary Chambers

Bitter experience! Regards, Gary ----- Original Message ----- From: Rob Rothwell To: Pharo-project(a)lists.gforge.inria.fr Sent: Tuesday, March 17, 2009 11:49 AM Subject: Re: [Pharo-project] World Graphics and Halos How do you guys KNOW this stuff???! Rob 2009/3/17 Gary Chambers <gazzaguru2(a)btinternet.com> Try this one ;-) Regards, Gary ----- Original Message ----- From: "StÃ©phane Ducasse" <stephane.ducasse(a)inria.fr> To: <Pharo-project(a)lists.gforge.inria.fr> Sent: Tuesday, March 17, 2009 10:19 AM Subject: Re: [Pharo-project] World Graphics and Halos do you have a nice little cs :) Stef On Mar 17, 2009, at 11:09 AM, Gary Chambers wrote: If we are going to use the optimised general case in Morph (a valid thing to do given the default drawOn: implementation) then I guess we need to check all implementors of drawOn: to do a proper areasRemainingToFill: if they are not standard and have non-opaque regions. Changing HaloMorph>>defaultColor to answer Color transparent fixes this one... In fact, for HaloMorph, #borderWidth should be overriden with the showBoundsInHalo/World logic and #defaultBorderColor to return Preferences menuSelectionColor. #drawOn: can then be removed. Regards, Gary ----- Original Message ----- From: Rob Rothwell To: Pharo-project(a)lists.gforge.inria.fr Sent: Monday, March 16, 2009 7:39 PM Subject: Re: [Pharo-project] World Graphics and Halos Yes... Preferences resetHaloSpecifications "works," but notice that when selecting a "plain old" Morph (like Morph new), it is overwritten by the background color... Rob On Mon, Mar 16, 2009 at 3:20 PM, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr > wrote: Ok I got it and I opened an issue. Stef On Mar 16, 2009, at 11:52 AM, Gary Chambers wrote: > Not one of mine... > The halo item in question is the addPaintBgdHandle which is still > present in > the images but removed. > Preferences resetHaloSpecifications needs to be invoked. > > Regards, Gary > > ----- Original Message ----- > From: "StÃ©phane Ducasse" <stephane.ducasse(a)inria.fr> > To: <Pharo-project(a)lists.gforge.inria.fr> > Sent: Monday, March 16, 2009 10:12 AM > Subject: Re: [Pharo-project] World Graphics and Halos > > >> Once you arrive to a fix point >> let me know what I should integrate. >> Stef >> >> On Mar 15, 2009, at 12:24 PM, Gary Chambers wrote: >> >>> I noticed the halo problem in the dev image too. Resetting the halo >>> specs is needed since one has been removed... >>> >>> Regards, Gary >>> ----- Original Message ----- >>> From: Rob Rothwell >>> To: Pharo-project(a)lists.gforge.inria.fr >>> Sent: Saturday, March 14, 2009 11:35 PM >>> Subject: Re: [Pharo-project] World Graphics and Halos >>> >>> Yep...that seemed to fix it! >>> >>> Now if I could just figure out how to remove a Morph from the World >>> without Halos! >>> >>> If I do System->About it is so big now that it won't all fit on my >>> screen, so I can't reach the ok button to close it and I am stuck >>> with it! >>> >>> Rob >>> >>> On Sat, Mar 14, 2009 at 7:11 PM, Henrik Sperre Johansen >>> <henrik.s.johansen(a)veloxit.no >>>> wrote: >>> Attached a .cs to the issue with a fix, also including the solution >>> Gary suggested for the taskbar-issue that was reported. >>> (I don't know how to remove methods in .cs files, and haven't yet >>> gotten around to learn how to make slices, so >>> BorderedMorph>>areasRemainingToFill: would have to be removed by >>> hand..) >>> >>> Cheers, >>> Henry >>> >>> On 14.03.2009 22:04, Rob Rothwell wrote: >>>> >>>> Done. >>>> >>>> Issues 655 >>>> >>>> On Mar 14, 2009, at 8:14 PM, Rob Rothwell wrote: >>>> >>>>> Hi all, >>>>> >>>>> Open up a 10250 dev image and click anywhere within the bounds of >>>>> the "Pharo" graphic. >>>>> >>>>> The world menu pops up and leaves part of itself behind when you >>>>> click somewhere else on the screen. >>> >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo- project >>> >>> >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project________… >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo- project >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > _______________________________________________ Pharo-project mailing list Pharo-project(a)lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project _______________________________________________ Pharo-project mailing list Pharo-project(a)lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project________… Pharo-project mailing list Pharo-project(a)lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project _______________________________________________ Pharo-project mailing list Pharo-project(a)lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project _______________________________________________ Pharo-project mailing list Pharo-project(a)lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project ------------------------------------------------------------------------------ _______________________________________________ Pharo-project mailing list Pharo-project(a)lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

March 17, 2009

Re: [Pharo-project] about web site

by Michael Roberts

Hi stef We have had a small section under about/organization for a while I think. Is this enough? Mike On 3/12/09, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: > may be we should add a little point explaining that there is a (non- > elected) board and a community.... > > Stef > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

March 17, 2009

Re: [Pharo-project] World Graphics and Halos

by Rob Rothwell

How do you guys KNOW this stuff???! Rob 2009/3/17 Gary Chambers <gazzaguru2(a)btinternet.com> > Try this one ;-) > > Regards, Gary > > ----- Original Message ----- From: "StÃ©phane Ducasse" < > stephane.ducasse(a)inria.fr> > To: <Pharo-project(a)lists.gforge.inria.fr> > Sent: Tuesday, March 17, 2009 10:19 AM > > Subject: Re: [Pharo-project] World Graphics and Halos > > > do you have a nice little cs :) > > Stef > > On Mar 17, 2009, at 11:09 AM, Gary Chambers wrote: > > If we are going to use the optimised general case in Morph (a valid >> thing to do given the default drawOn: implementation) then I guess >> we need to check all implementors of drawOn: to do a proper >> areasRemainingToFill: if they are not standard and have non-opaque >> regions. >> >> Changing HaloMorph>>defaultColor to answer Color transparent fixes >> this one... In fact, for HaloMorph, #borderWidth should be overriden >> with the showBoundsInHalo/World logic and #defaultBorderColor to >> return Preferences menuSelectionColor. #drawOn: can then be removed. >> >> Regards, Gary >> ----- Original Message ----- >> From: Rob Rothwell >> To: Pharo-project(a)lists.gforge.inria.fr >> Sent: Monday, March 16, 2009 7:39 PM >> Subject: Re: [Pharo-project] World Graphics and Halos >> >> Yes... >> >> Preferences resetHaloSpecifications "works," but notice that when >> selecting a "plain old" Morph (like Morph new), it is overwritten by >> the background color... >> >> Rob >> >> On Mon, Mar 16, 2009 at 3:20 PM, StÃ©phane Ducasse < >> stephane.ducasse(a)inria.fr >> > wrote: >> Ok I got it and I opened an issue. >> >> Stef >> >> On Mar 16, 2009, at 11:52 AM, Gary Chambers wrote: >> >> > Not one of mine... >> > The halo item in question is the addPaintBgdHandle which is still >> > present in >> > the images but removed. >> > Preferences resetHaloSpecifications needs to be invoked. >> > >> > Regards, Gary >> > >> > ----- Original Message ----- >> > From: "StÃ©phane Ducasse" <stephane.ducasse(a)inria.fr> >> > To: <Pharo-project(a)lists.gforge.inria.fr> >> > Sent: Monday, March 16, 2009 10:12 AM >> > Subject: Re: [Pharo-project] World Graphics and Halos >> > >> > >> >> Once you arrive to a fix point >> >> let me know what I should integrate. >> >> Stef >> >> >> >> On Mar 15, 2009, at 12:24 PM, Gary Chambers wrote: >> >> >> >>> I noticed the halo problem in the dev image too. Resetting the >> halo >> >>> specs is needed since one has been removed... >> >>> >> >>> Regards, Gary >> >>> ----- Original Message ----- >> >>> From: Rob Rothwell >> >>> To: Pharo-project(a)lists.gforge.inria.fr >> >>> Sent: Saturday, March 14, 2009 11:35 PM >> >>> Subject: Re: [Pharo-project] World Graphics and Halos >> >>> >> >>> Yep...that seemed to fix it! >> >>> >> >>> Now if I could just figure out how to remove a Morph from the >> World >> >>> without Halos! >> >>> >> >>> If I do System->About it is so big now that it won't all fit on my >> >>> screen, so I can't reach the ok button to close it and I am stuck >> >>> with it! >> >>> >> >>> Rob >> >>> >> >>> On Sat, Mar 14, 2009 at 7:11 PM, Henrik Sperre Johansen >> >>> <henrik.s.johansen(a)veloxit.no >> >>>> wrote: >> >>> Attached a .cs to the issue with a fix, also including the >> solution >> >>> Gary suggested for the taskbar-issue that was reported. >> >>> (I don't know how to remove methods in .cs files, and haven't yet >> >>> gotten around to learn how to make slices, so >> >>> BorderedMorph>>areasRemainingToFill: would have to be removed by >> >>> hand..) >> >>> >> >>> Cheers, >> >>> Henry >> >>> >> >>> On 14.03.2009 22:04, Rob Rothwell wrote: >> >>>> >> >>>> Done. >> >>>> >> >>>> Issues 655 >> >>>> >> >>>> On Mar 14, 2009, at 8:14 PM, Rob Rothwell wrote: >> >>>> >> >>>>> Hi all, >> >>>>> >> >>>>> Open up a 10250 dev image and click anywhere within the bounds >> of >> >>>>> the "Pharo" graphic. >> >>>>> >> >>>>> The world menu pops up and leaves part of itself behind when you >> >>>>> click somewhere else on the screen. >> >>> >> >>> >> >>> _______________________________________________ >> >>> Pharo-project mailing list >> >>> Pharo-project(a)lists.gforge.inria.fr >> >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo- >> project >> >>> >> >>> >> >>> >> >>> _______________________________________________ >> >>> Pharo-project mailing list >> >>> Pharo-project(a)lists.gforge.inria.fr >> >>> >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project________… >> >>> Pharo-project mailing list >> >>> Pharo-project(a)lists.gforge.inria.fr >> >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo- >> project >> >> >> >> >> >> _______________________________________________ >> >> Pharo-project mailing list >> >> Pharo-project(a)lists.gforge.inria.fr >> >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > >> > >> > _______________________________________________ >> > Pharo-project mailing list >> > Pharo-project(a)lists.gforge.inria.fr >> > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project________… >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

March 17, 2009

Re: [Pharo-project] World Graphics and Halos

by Gary Chambers

Try this one ;-) Regards, Gary ----- Original Message ----- From: "StÃ©phane Ducasse" <stephane.ducasse(a)inria.fr> To: <Pharo-project(a)lists.gforge.inria.fr> Sent: Tuesday, March 17, 2009 10:19 AM Subject: Re: [Pharo-project] World Graphics and Halos do you have a nice little cs :) Stef On Mar 17, 2009, at 11:09 AM, Gary Chambers wrote: > If we are going to use the optimised general case in Morph (a valid > thing to do given the default drawOn: implementation) then I guess > we need to check all implementors of drawOn: to do a proper > areasRemainingToFill: if they are not standard and have non-opaque > regions. > > Changing HaloMorph>>defaultColor to answer Color transparent fixes > this one... In fact, for HaloMorph, #borderWidth should be overriden > with the showBoundsInHalo/World logic and #defaultBorderColor to > return Preferences menuSelectionColor. #drawOn: can then be removed. > > Regards, Gary > ----- Original Message ----- > From: Rob Rothwell > To: Pharo-project(a)lists.gforge.inria.fr > Sent: Monday, March 16, 2009 7:39 PM > Subject: Re: [Pharo-project] World Graphics and Halos > > Yes... > > Preferences resetHaloSpecifications "works," but notice that when > selecting a "plain old" Morph (like Morph new), it is overwritten by > the background color... > > Rob > > On Mon, Mar 16, 2009 at 3:20 PM, StÃ©phane Ducasse > <stephane.ducasse(a)inria.fr > > wrote: > Ok I got it and I opened an issue. > > Stef > > On Mar 16, 2009, at 11:52 AM, Gary Chambers wrote: > > > Not one of mine... > > The halo item in question is the addPaintBgdHandle which is still > > present in > > the images but removed. > > Preferences resetHaloSpecifications needs to be invoked. > > > > Regards, Gary > > > > ----- Original Message ----- > > From: "StÃ©phane Ducasse" <stephane.ducasse(a)inria.fr> > > To: <Pharo-project(a)lists.gforge.inria.fr> > > Sent: Monday, March 16, 2009 10:12 AM > > Subject: Re: [Pharo-project] World Graphics and Halos > > > > > >> Once you arrive to a fix point > >> let me know what I should integrate. > >> Stef > >> > >> On Mar 15, 2009, at 12:24 PM, Gary Chambers wrote: > >> > >>> I noticed the halo problem in the dev image too. Resetting the > halo > >>> specs is needed since one has been removed... > >>> > >>> Regards, Gary > >>> ----- Original Message ----- > >>> From: Rob Rothwell > >>> To: Pharo-project(a)lists.gforge.inria.fr > >>> Sent: Saturday, March 14, 2009 11:35 PM > >>> Subject: Re: [Pharo-project] World Graphics and Halos > >>> > >>> Yep...that seemed to fix it! > >>> > >>> Now if I could just figure out how to remove a Morph from the > World > >>> without Halos! > >>> > >>> If I do System->About it is so big now that it won't all fit on my > >>> screen, so I can't reach the ok button to close it and I am stuck > >>> with it! > >>> > >>> Rob > >>> > >>> On Sat, Mar 14, 2009 at 7:11 PM, Henrik Sperre Johansen > >>> <henrik.s.johansen(a)veloxit.no > >>>> wrote: > >>> Attached a .cs to the issue with a fix, also including the > solution > >>> Gary suggested for the taskbar-issue that was reported. > >>> (I don't know how to remove methods in .cs files, and haven't yet > >>> gotten around to learn how to make slices, so > >>> BorderedMorph>>areasRemainingToFill: would have to be removed by > >>> hand..) > >>> > >>> Cheers, > >>> Henry > >>> > >>> On 14.03.2009 22:04, Rob Rothwell wrote: > >>>> > >>>> Done. > >>>> > >>>> Issues 655 > >>>> > >>>> On Mar 14, 2009, at 8:14 PM, Rob Rothwell wrote: > >>>> > >>>>> Hi all, > >>>>> > >>>>> Open up a 10250 dev image and click anywhere within the bounds > of > >>>>> the "Pharo" graphic. > >>>>> > >>>>> The world menu pops up and leaves part of itself behind when you > >>>>> click somewhere else on the screen. > >>> > >>> > >>> _______________________________________________ > >>> Pharo-project mailing list > >>> Pharo-project(a)lists.gforge.inria.fr > >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo- > project > >>> > >>> > >>> > >>> _______________________________________________ > >>> Pharo-project mailing list > >>> Pharo-project(a)lists.gforge.inria.fr > >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project________… > >>> Pharo-project mailing list > >>> Pharo-project(a)lists.gforge.inria.fr > >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo- > project > >> > >> > >> _______________________________________________ > >> Pharo-project mailing list > >> Pharo-project(a)lists.gforge.inria.fr > >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > > > > _______________________________________________ > > Pharo-project mailing list > > Pharo-project(a)lists.gforge.inria.fr > > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project________… > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project _______________________________________________ Pharo-project mailing list Pharo-project(a)lists.gforge.inria.fr http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project

March 17, 2009

Re: [Pharo-project] World Graphics and Halos

by Henrik Johansen

I believe this might be something like what he's talking of. Cheers, Henry StÃ©phane Ducasse wrote: > do you have a nice little cs :) > > Stef > > On Mar 17, 2009, at 11:09 AM, Gary Chambers wrote: > > >> If we are going to use the optimised general case in Morph (a valid >> thing to do given the default drawOn: implementation) then I guess >> we need to check all implementors of drawOn: to do a proper >> areasRemainingToFill: if they are not standard and have non-opaque >> regions. >> >> Changing HaloMorph>>defaultColor to answer Color transparent fixes >> this one... In fact, for HaloMorph, #borderWidth should be overriden >> with the showBoundsInHalo/World logic and #defaultBorderColor to >> return Preferences menuSelectionColor. #drawOn: can then be removed. >> >> Regards, Gary >> ----- Original Message ----- >> From: Rob Rothwell >> To: Pharo-project(a)lists.gforge.inria.fr >> Sent: Monday, March 16, 2009 7:39 PM >> Subject: Re: [Pharo-project] World Graphics and Halos >> >> Yes... >> >> Preferences resetHaloSpecifications "works," but notice that when >> selecting a "plain old" Morph (like Morph new), it is overwritten by >> the background color... >> >> Rob >> >> On Mon, Mar 16, 2009 at 3:20 PM, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr >> >>> wrote: >>> >> Ok I got it and I opened an issue. >> >> Stef >> >> On Mar 16, 2009, at 11:52 AM, Gary Chambers wrote: >> >> >>> Not one of mine... >>> The halo item in question is the addPaintBgdHandle which is still >>> present in >>> the images but removed. >>> Preferences resetHaloSpecifications needs to be invoked. >>> >>> Regards, Gary >>> >>> ----- Original Message ----- >>> From: "StÃ©phane Ducasse" <stephane.ducasse(a)inria.fr> >>> To: <Pharo-project(a)lists.gforge.inria.fr> >>> Sent: Monday, March 16, 2009 10:12 AM >>> Subject: Re: [Pharo-project] World Graphics and Halos >>> >>> >>> >>>> Once you arrive to a fix point >>>> let me know what I should integrate. >>>> Stef >>>> >>>> On Mar 15, 2009, at 12:24 PM, Gary Chambers wrote: >>>> >>>> >>>>> I noticed the halo problem in the dev image too. Resetting the >>>>> >> halo >> >>>>> specs is needed since one has been removed... >>>>> >>>>> Regards, Gary >>>>> ----- Original Message ----- >>>>> From: Rob Rothwell >>>>> To: Pharo-project(a)lists.gforge.inria.fr >>>>> Sent: Saturday, March 14, 2009 11:35 PM >>>>> Subject: Re: [Pharo-project] World Graphics and Halos >>>>> >>>>> Yep...that seemed to fix it! >>>>> >>>>> Now if I could just figure out how to remove a Morph from the >>>>> >> World >> >>>>> without Halos! >>>>> >>>>> If I do System->About it is so big now that it won't all fit on my >>>>> screen, so I can't reach the ok button to close it and I am stuck >>>>> with it! >>>>> >>>>> Rob >>>>> >>>>> On Sat, Mar 14, 2009 at 7:11 PM, Henrik Sperre Johansen >>>>> <henrik.s.johansen(a)veloxit.no >>>>> >>>>>> wrote: >>>>>> >>>>> Attached a .cs to the issue with a fix, also including the >>>>> >> solution >> >>>>> Gary suggested for the taskbar-issue that was reported. >>>>> (I don't know how to remove methods in .cs files, and haven't yet >>>>> gotten around to learn how to make slices, so >>>>> BorderedMorph>>areasRemainingToFill: would have to be removed by >>>>> hand..) >>>>> >>>>> Cheers, >>>>> Henry >>>>> >>>>> On 14.03.2009 22:04, Rob Rothwell wrote: >>>>> >>>>>> Done. >>>>>> >>>>>> Issues 655 >>>>>> >>>>>> On Mar 14, 2009, at 8:14 PM, Rob Rothwell wrote: >>>>>> >>>>>> >>>>>>> Hi all, >>>>>>> >>>>>>> Open up a 10250 dev image and click anywhere within the bounds >>>>>>> >> of >> >>>>>>> the "Pharo" graphic. >>>>>>> >>>>>>> The world menu pops up and leaves part of itself behind when you >>>>>>> click somewhere else on the screen. >>>>>>> >>>>> _______________________________________________ >>>>> Pharo-project mailing list >>>>> Pharo-project(a)lists.gforge.inria.fr >>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo- >>>>> >> project >> >>>>> >>>>> _______________________________________________ >>>>> Pharo-project mailing list >>>>> Pharo-project(a)lists.gforge.inria.fr >>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project________… >>>>> Pharo-project mailing list >>>>> Pharo-project(a)lists.gforge.inria.fr >>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo- >>>>> >> project >> >>>> _______________________________________________ >>>> Pharo-project mailing list >>>> Pharo-project(a)lists.gforge.inria.fr >>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >>> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project________… >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >> > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > >

March 17, 2009

Re: [Pharo-project] Losing click event

by StÃ©phane Ducasse

wanna want to kill them all those oddlySteppers.... Stef On Mar 17, 2009, at 11:13 AM, Gary Chambers wrote: > Yeah, the otherworldySteppers is part of my cleanup script too ;-) > (which > deals with the TransferMorphs, I think). > > Regards, Gary > > ----- Original Message ----- > From: "David RÃ¶thlisberger" <squeak(a)webcitas.ch> > To: <Pharo-project(a)lists.gforge.inria.fr> > Sent: Monday, March 16, 2009 10:18 PM > Subject: Re: [Pharo-project] Losing click event > > >> >>> Have you tried the following? >>> TransferMorph allInstances do: [:ea | ea delete] >> >> or: >> Utilities cleanseOtherWorldlySteppers >> >> David >> >>> from >>> http://lists.squeakfoundation.org/pipermail/squeak-dev/2008-December/133369… >>> HTH, >>> Adrian >>> >>> On Mar 16, 2009, at 17:17 , Hilaire Fernandes wrote: >>> >>>> No, there is no hidden morph. There is a variation in the bug, as >>>> for >>>> some time I need to move slighly the mouse to get the clic event >>>> handled. >>>> I remove all Morph from screen including taskbar, does not get >>>> better. >>>> I try with different theme >>>> Nothing special in the process browser, at least no process I can >>>> kill. >>>> I saw it is reported in Mantis >>>> http://bugs.squeak.org/view.php?id=7039 >>>> >>>> It seems the problem started to occure from a debugging session >>>> with >>>> seaside >>>> >>>> >>>> 2009/3/16 Gary Chambers <gazzaguru2(a)btinternet.com>: >>>>> Not seen that recently, since I fixed the DockingBar (if you use >>>>> one) >>>>> layering and the putting of minimised window (invisible with >>>>> taskbar) well >>>>> offscreen. Perhaps you have an inivisble Morph around (World >>>>> submorphs >>>>> should verify). >>>>> >>>>> Regards, Gary >>>>> >>>>> ----- Original Message ----- >>>>> From: "Hilaire Fernandes" <hilaire(a)ofset.org> >>>>> To: "Pharo Development" <pharo-project(a)lists.gforge.inria.fr> >>>>> Sent: Monday, March 16, 2009 1:17 PM >>>>> Subject: [Pharo-project] Losing click event >>>>> >>>>> >>>>>> I have something strange happening in an image. >>>>>> >>>>>> Randomly, mouse click event seems to be lost. I have to click >>>>>> two or >>>>>> three times to get the event handled. It happens anywhere in the >>>>>> image. >>>>>> Is there a way to fix that? >>>>>> >>>>>> Hilaire >>>>>> -- >>>>>> http://blog.ofset.org/hilaire >>>>>> >>>>>> _______________________________________________ >>>>>> Pharo-project mailing list >>>>>> Pharo-project(a)lists.gforge.inria.fr >>>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>>>> >>>>> _______________________________________________ >>>>> Pharo-project mailing list >>>>> Pharo-project(a)lists.gforge.inria.fr >>>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo- >>>>> project >>>>> >>>> >>>> >>>> -- >>>> http://blog.ofset.org/hilaire >>>> >>>> _______________________________________________ >>>> Pharo-project mailing list >>>> Pharo-project(a)lists.gforge.inria.fr >>>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >>> >>> _______________________________________________ >>> Pharo-project mailing list >>> Pharo-project(a)lists.gforge.inria.fr >>> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >>> >>> >> >> >> >> _______________________________________________ >> Pharo-project mailing list >> Pharo-project(a)lists.gforge.inria.fr >> http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project > > > _______________________________________________ > Pharo-project mailing list > Pharo-project(a)lists.gforge.inria.fr > http://lists.gforge.inria.fr/cgi-bin/mailman/listinfo/pharo-project >

March 17, 2009