Richard, Am 07.01.21 um 07:15 schrieb Richard O'Keefe:
You aren't sure what point I was making?
exactly, the thread you answered was about a possible bug in NeoCSV parser. Your post was about your doubts about the claim of efficiency on the parser's web site. So you threw in some completely unrelated topic and started by sounding more or less destructive (maybe this is a word too harsh, but I am not a native english speaker... maybe "challenging" is a better word?). I cannot comment on the efficiency of NeoCSV, other than it is fast enough for my use case and it gives me the option of combining reading CSV and producing objects in one run, even if some checks, backpointering, whatever has to be done after the parsing. It has a nice API and is supported quite well. The thread and Sven's reaction underline this last statement quite impressively: my bug was fixed within hours.
How about the one I actually wrote down:  What test data was NeoCSV benchmarked with  and can I get my hands on it?
That is a valid question. It is off-topic in the thread, however. And maybe your tone was a bit less kind than it should be. Nevertheless, the discussion itself is worth its own thread. If the raw speed of reading lots of CSV data is of concern in a use case, we should look for and at alternatives. You are of course free to ask about alternatives, present your measurements or alternative implementation and ask for comments, ideas, all kinds of input. That's what yields progress.
THAT is the point. The data points I showed (and many others I have not) are not satisfactory to me.
Fine and absolutely worth discussing. Maybe in its own discussion thread and started with a friendly invitation for discussion. Your post was more like "Oh, and, by the way, NeoCSV sucks". Maybe unintended, but that is what I read.
I have been searching for CSV test collections. One site offered 6 files of which only one downloaded. I found a "benchmark suite" for CSV containing no actual CSV files. So where *else* should I look for benchmark data than associated with a parser people in this community are generally happy with that is described as "efficient"?
So you would like the developers of NeoCSV to provide test data that allows for benchmarking and comparison? A valid point.
Is it so unreasonable to suspect that my results might be a fluke? Is it bad manners to assume that something described as efficient has tests showing that?
Well, no. It is absolutely okay to ask if a claim like "efficient" can be proven. You are free to present better choices and discuss your definition of efficiency. For me personally, your post sounded a bit like some earlier ones of yours which seemed to have no other point than "I have something better, but I won't show you". Hence my reaction. I may have read something into your post that you haven't written into it. Sorry for that. Joachim
On Wed, 6 Jan 2021 at 22:23, jtuchel@objektfabrik.de <mailto:jtuchel@objektfabrik.de> <jtuchel@objektfabrik.de <mailto:jtuchel@objektfabrik.de>> wrote:
Richard,
I am not sure what point you are trying to make here. You have something cooler and faster? Great, how about sharing? You could make a faster one when it doesn't convert numbers and stuff? Great. I guess the time will be spent after parsing in 95% of the use cases. It depends. And that is exactly what you are saying. The word efficient means nothing without context. How is that related to this thread?
I think this thread mostly shows the strength of a community, especially when there are members who are active, friendly and highly motivated. My problem git solved in blazing speed without me paying anything for it. Just because Sven thought my problem could be other people's problem as well.
I am happy with NeoCSV's speed, even if there may be more lightweigt and faster solutions. Tbh, my main concern with NeoCSV is not speed, but how well I can understand problems and fix them. I care about data types on parsing. A non-configurable csv parser gives me a bunch of dictionaries and Strings. That could be a waste of cycles and memory once you need the data as objects. My use case is not importing trillions of records all day, and for a few hundred or maybe sometimes thousands, it is good/fast enough.
Joachim
Am 06.01.21 um 05:10 schrieb Richard O'Keefe:
NeoCSVReader is described as efficient. What is that in comparison to? What benchmark data are used? Here are benchmark results measured today. (5,000 data line file, 9,145,009 characters).  method         time(ms)  Just read characters  410  CSVDecoder>>next    3415  astc's CSV reader (defaults). 1.26 x CSVParser  NeoCSVReader>>next   4798  NeoCSVReader (default state). 1.78 x CSVParser  CSVParser>>next    2701  pared-to-the-bone CSV reader. 1.00 reference.
(10,000 data line file, 1,544,836 characters).  method         time(ms)  Just read characters   93  CSVDecoder>>next    530  astc's CSV reader (defaults). 1.26 x CSVParser  NeoCSVReader>>next   737  NeoCSVReader (default state). 1.75 x CSVParser  CSVParser>>next     421  pared-to-the-bone CSV reader. 1.00 reference.
CSVParser is just 78 lines and is not customisable. It really is stripped to pretty much an absolute minimum. All of the parsers were configured (if that made sense) to return an Array of Strings. Many of the CSV files I've worked with use short records instead of ending a line with a lot of commas. Some of them also have the occasional stray comment off to the right, not mentioned in the header. I've also found it necessary to skip multiple lines at the beginning and/or end. (Really, some government agencies seem to have NO idea that anyone might want to do more with a CSV file than eyeball it in Excel.)
If there is a benchmark suite I can use to improve CSVDecoder, I would like to try it out.
On Tue, 5 Jan 2021 at 02:36, jtuchel@objektfabrik.de <mailto:jtuchel@objektfabrik.de> <jtuchel@objektfabrik.de <mailto:jtuchel@objektfabrik.de>> wrote:
Happy new year to all of you! May 2021 be an increasingly less crazy year than 2020...
I have a question that sounds a bit strange, but we have two effects with NeoCSVReader related to wrong definitions of the reader.
One effect is that reading a Stream #upToEnd leads to an endless loop, the other is that the Reader produces twice as many objects as there are lines in the file that is being read.
In both scenarios, the reason is that the CSV Reader has a wrong number of column definitions.
Of course that is my fault: why do I feed a "malformed" CSV file to poor NeoCSVReader?
Let me explain: we have a few import interfaces which end users can define using a more or less nice assistant in our Application. The CSV files they upload to our App come from third parties like payment providers, banks and other sources. These change their file structures whenever they feel like it and never tell anybody. So a CSV import that may have been working for years may one day tear a whole web server image down because of a wrong number of fieldAccessors. This is bad on many levels.
You can easily try the doubling effect at home: define a working CSV Reader and comment out one of the addField: commands before you use the NeoCSVReader to parse a CSV file. Say your CSV file has 3 lines with 4 columns each. If you remove one of the fieldAccessors, an #upToEnd will yoield an Array of 6 objects rather than 3.
I haven't found the reason for the cases where this leads to an endless loop, but at least this one is clear...
I *guess* this is due to the way #readEndOfLine is implemented. It seems to not peek forward to the end of the line. I have the gut feeling #peekChar should peek instead of reading the #next character form the input Stream, but #peekChar has too many senders to just go ahead and mess with it ;-)
So I wonder if there are any tried approaches to this problem.
One thing I might do is not use #upToEnd, but read each line using PositionableStream>>#nextLine and first check each line if the number of separators matches the number of fieldAccessors minus 1 (and go through the hoops of handling separators in quoted fields and such...). Only if that test succeeds, I would then hand a Stream with the whole line to the reader and do a #next.
This will, however, mean a lot of extra cycles for large files. Of course I could do this only for some lines, maybe just the first one. Whatever.
But somehow I have the feeling I should get an exception telling me the line is not compatible to the Reader's definition or such. Or #readAtEndOrEndOfLine should just walk the line to the end and ignore the rest of the line, returnong an incomplete object....
Maybe I am just missing the right setting or switch? What best practices did you guys come up with for such problems?
Thanks in advance,
Joachim
-- ----------------------------------------------------------------------- Objektfabrik Joachim Tuchelmailto:jtuchel@objektfabrik.de <mailto:jtuchel@objektfabrik.de> Fliederweg 1http://www.objektfabrik.de <http://www.objektfabrik.de> D-71640 Ludwigsburghttp://joachimtuchel.wordpress.com <http://joachimtuchel.wordpress.com> Telefon: +49 7141 56 10 86 0 Fax: +49 7141 56 10 86 1
-- ----------------------------------------------------------------------- Objektfabrik Joachim Tuchel mailto:jtuchel@objektfabrik.de Fliederweg 1 http://www.objektfabrik.de D-71640 Ludwigsburg http://joachimtuchel.wordpress.com Telefon: +49 7141 56 10 86 0 Fax: +49 7141 56 10 86 1