How to report website text bugs?
Hi Guys - how is the best way to report website and text bugs? As I know the English is not always a first language (and you guys are busy writing code anyway) - its up to us native English speakers to chip in where we can. I was pleased to get the notice that on OSX Sierra I need to do something extra to get Pharo to work, however the text could be slightly corrected eg. (Bolded words changed) Are you using macOS Sierra? Due to changes in security policies of macOS, you will need to put the VM in the /Applications folder. We are working to fix this temporary inconvenience. Also - the Hello world command line example on the front page doesnât work on a standard Terminal on a Mac (you get an error: $ ./pharo Pharo.image eval "Stdio stdout << 'Hello,World!'" -bash: !'": event not found The culprit is of course the â!â Character so a better example might be: $ ./pharo Pharo.image eval "Stdio stdout << 'Hello World'" Hello WorldStdioStream: 'stdout' Although, in this case, is it expected that the return string is merged with some other output text (e.g. the StdioStream:â¦.?). I think its an impressive example, but it just doesnât quite look right? Tim
Hi Tim,
On 29 Nov 2016, at 00:57, Tim Mackinnon <tim@testit.works> wrote:
Hi Guys - how is the best way to report website and text bugs?
As I know the English is not always a first language (and you guys are busy writing code anyway) - its up to us native English speakers to chip in where we can.
I was pleased to get the notice that on OSX Sierra I need to do something extra to get Pharo to work, however the text could be slightly corrected eg. (Bolded words changed)
Are you using macOS Sierra? Due to changes in security policies of macOS, you will need to put the VM in the /Applications folder. We are working to fix this temporary inconvenience.
Also - the Hello world command line example on the front page doesnât work on a standard Terminal on a Mac (you get an error:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello,World!'" -bash: !'": event not found
The culprit is of course the â!â Character so a better example might be:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello World'" Hello WorldStdioStream: 'stdout'
Although, in this case, is it expected that the return string is merged with some other output text (e.g. the StdioStream:â¦.?). I think its an impressive example, but it just doesnât quite look right?
Tim
Right, that is not a good example, at all. I don't like it. Good of you to give feedback. I would rather says something like ./pharo Pharo.image eval '42 factorial' The stdio example leads way too far (difference between return value and output, newlines, weirder syntax, for Pharo at least, different kinds of quotes, the handling of !). Sven
Report them on pharo.fogbugz.com http://pharo.org/contribute-report-bug Use Project: Websites as the reference. Phil On Tue, Nov 29, 2016 at 12:57 AM, Tim Mackinnon <tim@testit.works> wrote:
Hi Guys - how is the best way to report website and text bugs?
As I know the English is not always a first language (and you guys are busy writing code anyway) - its up to us native English speakers to chip in where we can.
I was pleased to get the notice that on OSX Sierra I need to do something extra to get Pharo to work, however the text could be slightly corrected eg. (Bolded words changed)
Are you *using* macOS Sierra? Due to changes in security policies of macOS, you will need to put the VM *in the* /Applications folder. We are working to fix this temporary *inconvenience*.
Also - the Hello world command line example on the front page doesnât work on a standard Terminal on a Mac (you get an error:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello,World!'" -bash: !'": event not found
The culprit is of course the â!â Character so a better example might be:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello World'" Hello WorldStdioStream: 'stdout'
Although, in this case, is it expected that the return string is merged with some other output text (e.g. the StdioStream:â¦.?). I think its an impressive example, but it just doesnât quite look right?
Tim
yes, but no need⦠I already fixed it :)
On 29 Nov 2016, at 09:29, phil@highoctane.be wrote:
Report them on pharo.fogbugz.com <http://pharo.fogbugz.com/>
http://pharo.org/contribute-report-bug <http://pharo.org/contribute-report-bug>
Use Project: Websites as the reference.
Phil
On Tue, Nov 29, 2016 at 12:57 AM, Tim Mackinnon <tim@testit.works <mailto:tim@testit.works>> wrote: Hi Guys - how is the best way to report website and text bugs?
As I know the English is not always a first language (and you guys are busy writing code anyway) - its up to us native English speakers to chip in where we can.
I was pleased to get the notice that on OSX Sierra I need to do something extra to get Pharo to work, however the text could be slightly corrected eg. (Bolded words changed)
Are you using macOS Sierra? Due to changes in security policies of macOS, you will need to put the VM in the /Applications folder. We are working to fix this temporary inconvenience.
Also - the Hello world command line example on the front page doesnât work on a standard Terminal on a Mac (you get an error:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello,World!'" -bash: !'": event not found
The culprit is of course the â!â Character so a better example might be:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello World'" Hello WorldStdioStream: 'stdout'
Although, in this case, is it expected that the return string is merged with some other output text (e.g. the StdioStream:â¦.?). I think its an impressive example, but it just doesnât quite look right?
Tim
Ok - great. But I will remember that for future reference. I noticed a number of small textual/grammatical things in the Pharo 5 UI as well, so I will dust of the cobwebs on how to create some some slices and see if I can help in a small way. Tim
On 29 Nov 2016, at 08:41, Esteban Lorenzano <estebanlm@gmail.com> wrote:
yes, but no need⦠I already fixed it :)
On 29 Nov 2016, at 09:29, phil@highoctane.be <mailto:phil@highoctane.be> wrote:
Report them on pharo.fogbugz.com <http://pharo.fogbugz.com/>
http://pharo.org/contribute-report-bug <http://pharo.org/contribute-report-bug>
Use Project: Websites as the reference.
Phil
On Tue, Nov 29, 2016 at 12:57 AM, Tim Mackinnon <tim@testit.works <mailto:tim@testit.works>> wrote: Hi Guys - how is the best way to report website and text bugs?
As I know the English is not always a first language (and you guys are busy writing code anyway) - its up to us native English speakers to chip in where we can.
I was pleased to get the notice that on OSX Sierra I need to do something extra to get Pharo to work, however the text could be slightly corrected eg. (Bolded words changed)
Are you using macOS Sierra? Due to changes in security policies of macOS, you will need to put the VM in the /Applications folder. We are working to fix this temporary inconvenience.
Also - the Hello world command line example on the front page doesnât work on a standard Terminal on a Mac (you get an error:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello,World!'" -bash: !'": event not found
The culprit is of course the â!â Character so a better example might be:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello World'" Hello WorldStdioStream: 'stdout'
Although, in this case, is it expected that the return string is merged with some other output text (e.g. the StdioStream:â¦.?). I think its an impressive example, but it just doesnât quite look right?
Tim
I just tried the new example on the website (factorial is a great example from the command line - I like it). The output is: $ ./pharo Pharo.image eval "42 factorial" 'No change' 1405006117752879898543142606244511569936384000000000 $ Out of curiosity, What is the âNo Changeâ message above the answer? Tim
On 29 Nov 2016, at 08:41, Esteban Lorenzano <estebanlm@gmail.com> wrote:
yes, but no need⦠I already fixed it :)
On 29 Nov 2016, at 09:29, phil@highoctane.be <mailto:phil@highoctane.be> wrote:
Report them on pharo.fogbugz.com <http://pharo.fogbugz.com/>
http://pharo.org/contribute-report-bug <http://pharo.org/contribute-report-bug>
Use Project: Websites as the reference.
Phil
On Tue, Nov 29, 2016 at 12:57 AM, Tim Mackinnon <tim@testit.works <mailto:tim@testit.works>> wrote: Hi Guys - how is the best way to report website and text bugs?
As I know the English is not always a first language (and you guys are busy writing code anyway) - its up to us native English speakers to chip in where we can.
I was pleased to get the notice that on OSX Sierra I need to do something extra to get Pharo to work, however the text could be slightly corrected eg. (Bolded words changed)
Are you using macOS Sierra? Due to changes in security policies of macOS, you will need to put the VM in the /Applications folder. We are working to fix this temporary inconvenience.
Also - the Hello world command line example on the front page doesnât work on a standard Terminal on a Mac (you get an error:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello,World!'" -bash: !'": event not found
The culprit is of course the â!â Character so a better example might be:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello World'" Hello WorldStdioStream: 'stdout'
Although, in this case, is it expected that the return string is merged with some other output text (e.g. the StdioStream:â¦.?). I think its an impressive example, but it just doesnât quite look right?
Tim
On 30 Nov 2016, at 11:26, Tim Mackinnon <tim@testit.works> wrote:
I just tried the new example on the website (factorial is a great example from the command line - I like it).
The output is:
$ ./pharo Pharo.image eval "42 factorial" 'No change' 1405006117752879898543142606244511569936384000000000 $
Out of curiosity, What is the âNo Changeâ message above the answer?
no idea :) obviously⦠a remaining error :P Esteban
Tim
On 29 Nov 2016, at 08:41, Esteban Lorenzano <estebanlm@gmail.com <mailto:estebanlm@gmail.com>> wrote:
yes, but no need⦠I already fixed it :)
On 29 Nov 2016, at 09:29, phil@highoctane.be <mailto:phil@highoctane.be> wrote:
Report them on pharo.fogbugz.com <http://pharo.fogbugz.com/>
http://pharo.org/contribute-report-bug <http://pharo.org/contribute-report-bug>
Use Project: Websites as the reference.
Phil
On Tue, Nov 29, 2016 at 12:57 AM, Tim Mackinnon <tim@testit.works <mailto:tim@testit.works>> wrote: Hi Guys - how is the best way to report website and text bugs?
As I know the English is not always a first language (and you guys are busy writing code anyway) - its up to us native English speakers to chip in where we can.
I was pleased to get the notice that on OSX Sierra I need to do something extra to get Pharo to work, however the text could be slightly corrected eg. (Bolded words changed)
Are you using macOS Sierra? Due to changes in security policies of macOS, you will need to put the VM in the /Applications folder. We are working to fix this temporary inconvenience.
Also - the Hello world command line example on the front page doesnât work on a standard Terminal on a Mac (you get an error:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello,World!'" -bash: !'": event not found
The culprit is of course the â!â Character so a better example might be:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello World'" Hello WorldStdioStream: 'stdout'
Although, in this case, is it expected that the return string is merged with some other output text (e.g. the StdioStream:â¦.?). I think its an impressive example, but it just doesnât quite look right?
Tim
On 30 Nov 2016, at 12:09, Esteban Lorenzano <estebanlm@gmail.com> wrote:
On 30 Nov 2016, at 11:26, Tim Mackinnon <tim@testit.works <mailto:tim@testit.works>> wrote:
I just tried the new example on the website (factorial is a great example from the command line - I like it).
The output is:
$ ./pharo Pharo.image eval "42 factorial" 'No change' 1405006117752879898543142606244511569936384000000000 $
Out of curiosity, What is the âNo Changeâ message above the answer?
no idea :) obviously⦠a remaining error :P and btw⦠thatâs obviously a transcript message.
Esteban
Tim
On 29 Nov 2016, at 08:41, Esteban Lorenzano <estebanlm@gmail.com <mailto:estebanlm@gmail.com>> wrote:
yes, but no need⦠I already fixed it :)
On 29 Nov 2016, at 09:29, phil@highoctane.be <mailto:phil@highoctane.be> wrote:
Report them on pharo.fogbugz.com <http://pharo.fogbugz.com/>
http://pharo.org/contribute-report-bug <http://pharo.org/contribute-report-bug>
Use Project: Websites as the reference.
Phil
On Tue, Nov 29, 2016 at 12:57 AM, Tim Mackinnon <tim@testit.works <mailto:tim@testit.works>> wrote: Hi Guys - how is the best way to report website and text bugs?
As I know the English is not always a first language (and you guys are busy writing code anyway) - its up to us native English speakers to chip in where we can.
I was pleased to get the notice that on OSX Sierra I need to do something extra to get Pharo to work, however the text could be slightly corrected eg. (Bolded words changed)
Are you using macOS Sierra? Due to changes in security policies of macOS, you will need to put the VM in the /Applications folder. We are working to fix this temporary inconvenience.
Also - the Hello world command line example on the front page doesnât work on a standard Terminal on a Mac (you get an error:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello,World!'" -bash: !'": event not found
The culprit is of course the â!â Character so a better example might be:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello World'" Hello WorldStdioStream: 'stdout'
Although, in this case, is it expected that the return string is merged with some other output text (e.g. the StdioStream:â¦.?). I think its an impressive example, but it just doesnât quite look right?
Tim
SystemNavigation new allLocalCallsOn: 'No change' ofClass: ProtoObject . "a Set(Delay class>>#delaySchedulerClass:)" From: Pharo-dev [mailto:pharo-dev-bounces@lists.pharo.org] On Behalf Of Esteban Lorenzano Sent: Wednesday, November 30, 2016 12:14 PM To: Pharo Development List <pharo-dev@lists.pharo.org> Subject: Re: [Pharo-dev] How to report website text bugs? On 30 Nov 2016, at 12:09, Esteban Lorenzano <estebanlm@gmail.com<mailto:estebanlm@gmail.com>> wrote: On 30 Nov 2016, at 11:26, Tim Mackinnon <tim@testit.works<mailto:tim@testit.works>> wrote: I just tried the new example on the website (factorial is a great example from the command line - I like it). The output is: $ ./pharo Pharo.image eval "42 factorial" 'No change' 1405006117752879898543142606244511569936384000000000 $ Out of curiosity, What is the âNo Changeâ message above the answer? no idea :) obviously⦠a remaining error :P and btw⦠thatâs obviously a transcript message. Esteban Tim On 29 Nov 2016, at 08:41, Esteban Lorenzano <estebanlm@gmail.com<mailto:estebanlm@gmail.com>> wrote: yes, but no need⦠I already fixed it :) On 29 Nov 2016, at 09:29, phil@highoctane.be<mailto:phil@highoctane.be> wrote: Report them on pharo.fogbugz.com<http://pharo.fogbugz.com/> http://pharo.org/contribute-report-bug Use Project: Websites as the reference. Phil On Tue, Nov 29, 2016 at 12:57 AM, Tim Mackinnon <tim@testit.works<mailto:tim@testit.works>> wrote: Hi Guys - how is the best way to report website and text bugs? As I know the English is not always a first language (and you guys are busy writing code anyway) - its up to us native English speakers to chip in where we can. I was pleased to get the notice that on OSX Sierra I need to do something extra to get Pharo to work, however the text could be slightly corrected eg. (Bolded words changed) Are you using macOS Sierra? Due to changes in security policies of macOS, you will need to put the VM in the /Applications folder. We are working to fix this temporary inconvenience. Also - the Hello world command line example on the front page doesnât work on a standard Terminal on a Mac (you get an error: $ ./pharo Pharo.image eval "Stdio stdout << 'Hello,World!'" -bash: !'": event not found The culprit is of course the â!â Character so a better example might be: $ ./pharo Pharo.image eval "Stdio stdout << 'Hello World'" Hello WorldStdioStream: 'stdout' Although, in this case, is it expected that the return string is merged with some other output text (e.g. the StdioStream:â¦.?). I think its an impressive example, but it just doesnât quite look right? Tim
On Wed, Nov 30, 2016 at 7:37 PM, Henrik Nergaard <henrik.nergaard@uia.no> wrote:
SystemNavigation new allLocalCallsOn: 'No change' ofClass: ProtoObject .
"a Set(Delay class>>#delaySchedulerClass:)"
That is only called from two places: * DelayBenchmark>>bench: * Delay class >> systemSettingOn: so it is curious that #delaySchedulerClass: is being invoked.
From: Pharo-dev [mailto:pharo-dev-bounces@lists.pharo.org] On Behalf Of Esteban Lorenzano Sent: Wednesday, November 30, 2016 12:14 PM To: Pharo Development List <pharo-dev@lists.pharo.org> Subject: Re: [Pharo-dev] How to report website text bugs?
On 30 Nov 2016, at 12:09, Esteban Lorenzano <estebanlm@gmail.com> wrote: On 30 Nov 2016, at 11:26, Tim Mackinnon <tim@testit.works> wrote:
I just tried the new example on the website (factorial is a great example from the command line - I like it).
The output is:
$ ./pharo Pharo.image eval "42 factorial" 'No change' 1405006117752879898543142606244511569936384000000000
Out of curiosity, What is the âNo Changeâ message above the answer? no idea :) obviously⦠a remaining error :P and btw⦠thatâs obviously a transcript message.
actually an #inform: On Thu, Dec 1, 2016 at 12:14 AM, Sven Van Caekenberghe <sven@stfx.eu> wrote:
Tim,
On 30 Nov 2016, at 11:26, Tim Mackinnon <tim@testit.works> wrote:
I just tried the new example on the website (factorial is a great example from the command line - I like it).
The output is:
$ ./pharo Pharo.image eval "42 factorial" 'No change' 1405006117752879898543142606244511569936384000000000 $
Out of curiosity, What is the âNo Changeâ message above the answer?
What version are you using, I just tried (on macOS 10.12.1), in a terminal:
prometheus:pharo6 sven$ curl get.pharo.org/60+vm | bash % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 2901 100 2901 0 0 2565 0 0:00:01 0:00:01 --:--:-- 2571 Downloading the latest 60 Image: http://files.pharo.org/get-files/60/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/60/pharo-mac-stable.zip pharo-vm/Pharo.app/Contents/MacOS/Pharo Downloading PharoV60.sources: http://files.pharo.org/get-files/60/sources.zip Creating starter scripts pharo and pharo-ui
prometheus:pharo6 sven$ ./pharo Pharo.image printVersion [version] 6.0 #60311
prometheus:pharo6 sven$ ./pharo Pharo.image eval '42 factorial' 1405006117752879898543142606244511569936384000000000
Works like a charm. I assume it works on Linux too.
I just tried the same with new download of Pharo 5 and it worked without outputting 'No change' cheers -ben
Am 01.12.2016 12:30 vorm. schrieb "Ben Coman" <btc@openinworld.com>:
On Wed, Nov 30, 2016 at 7:37 PM, Henrik Nergaard <henrik.nergaard@uia.no>
wrote:
SystemNavigation new allLocalCallsOn: 'No change' ofClass: ProtoObject .
"a Set(Delay class>>#delaySchedulerClass:)"
That is only called from two places: * DelayBenchmark>>bench: * Delay class >> systemSettingOn: so it is curious that #delaySchedulerClass: is being invoked.
From: Pharo-dev [mailto:pharo-dev-bounces@lists.pharo.org] On Behalf Of Esteban Lorenzano Sent: Wednesday, November 30, 2016 12:14 PM To: Pharo Development List <pharo-dev@lists.pharo.org> Subject: Re: [Pharo-dev] How to report website text bugs?
On 30 Nov 2016, at 12:09, Esteban Lorenzano <estebanlm@gmail.com> wrote: On 30 Nov 2016, at 11:26, Tim Mackinnon <tim@testit.works> wrote:
I just tried the new example on the website (factorial is a great example from the command line - I like it).
The output is:
$ ./pharo Pharo.image eval "42 factorial" 'No change' 1405006117752879898543142606244511569936384000000000
Out of curiosity, What is the âNo Changeâ message above the answer? no idea :) obviously⦠a remaining error :P and btw⦠thatâs obviously a transcript message.
actually an #inform:
On Thu, Dec 1, 2016 at 12:14 AM, Sven Van Caekenberghe <sven@stfx.eu> wrote:
Tim,
On 30 Nov 2016, at 11:26, Tim Mackinnon <tim@testit.works> wrote:
I just tried the new example on the website (factorial is a great example from the command line - I like it).
The output is:
$ ./pharo Pharo.image eval "42 factorial" 'No change' 1405006117752879898543142606244511569936384000000000 $
Out of curiosity, What is the âNo Changeâ message above the answer?
What version are you using, I just tried (on macOS 10.12.1), in a terminal:
prometheus:pharo6 sven$ curl get.pharo.org/60+vm | bash % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 2901 100 2901 0 0 2565 0 0:00:01 0:00:01 --:--:-- 2571 Downloading the latest 60 Image: http://files.pharo.org/get-files/60/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/60/pharo-mac-stable.zip pharo-vm/Pharo.app/Contents/MacOS/Pharo Downloading PharoV60.sources: http://files.pharo.org/get-files/60/sources.zip Creating starter scripts pharo and pharo-ui
prometheus:pharo6 sven$ ./pharo Pharo.image printVersion [version] 6.0 #60311
prometheus:pharo6 sven$ ./pharo Pharo.image eval '42 factorial' 1405006117752879898543142606244511569936384000000000
Works like a charm. I assume it works on Linux too.
I just tried the same with new download of Pharo 5 and it worked without outputting 'No change' cheers -ben
It depends on your user settings. If and what set of user settings were exported. And maybe, if there is a set if user settings in the old format.
On Thu, Dec 1, 2016 at 2:21 PM, Nicolai Hess <nicolaihess@gmail.com> wrote:
Am 01.12.2016 12:30 vorm. schrieb "Ben Coman" <btc@openinworld.com>:
On Wed, Nov 30, 2016 at 7:37 PM, Henrik Nergaard <henrik.nergaard@uia.no> wrote:
SystemNavigation new allLocalCallsOn: 'No change' ofClass: ProtoObject .
"a Set(Delay class>>#delaySchedulerClass:)"
That is only called from two places: * DelayBenchmark>>bench: * Delay class >> systemSettingOn: so it is curious that #delaySchedulerClass: is being invoked.
From: Pharo-dev [mailto:pharo-dev-bounces@lists.pharo.org] On Behalf Of Esteban Lorenzano Sent: Wednesday, November 30, 2016 12:14 PM To: Pharo Development List <pharo-dev@lists.pharo.org> Subject: Re: [Pharo-dev] How to report website text bugs?
On 30 Nov 2016, at 12:09, Esteban Lorenzano <estebanlm@gmail.com> wrote: On 30 Nov 2016, at 11:26, Tim Mackinnon <tim@testit.works> wrote:
I just tried the new example on the website (factorial is a great example from the command line - I like it).
The output is:
$ ./pharo Pharo.image eval "42 factorial" 'No change' 1405006117752879898543142606244511569936384000000000
Out of curiosity, What is the âNo Changeâ message above the answer? no idea :) obviously⦠a remaining error :P and btw⦠thatâs obviously a transcript message.
actually an #inform:
On Thu, Dec 1, 2016 at 12:14 AM, Sven Van Caekenberghe <sven@stfx.eu> wrote:
Tim,
On 30 Nov 2016, at 11:26, Tim Mackinnon <tim@testit.works> wrote:
I just tried the new example on the website (factorial is a great example from the command line - I like it).
The output is:
$ ./pharo Pharo.image eval "42 factorial" 'No change' 1405006117752879898543142606244511569936384000000000 $
Out of curiosity, What is the âNo Changeâ message above the answer?
What version are you using, I just tried (on macOS 10.12.1), in a terminal:
prometheus:pharo6 sven$ curl get.pharo.org/60+vm | bash % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 2901 100 2901 0 0 2565 0 0:00:01 0:00:01 --:--:-- 2571 Downloading the latest 60 Image: http://files.pharo.org/get-files/60/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/60/pharo-mac-stable.zip pharo-vm/Pharo.app/Contents/MacOS/Pharo Downloading PharoV60.sources: http://files.pharo.org/get-files/60/sources.zip Creating starter scripts pharo and pharo-ui
prometheus:pharo6 sven$ ./pharo Pharo.image printVersion [version] 6.0 #60311
prometheus:pharo6 sven$ ./pharo Pharo.image eval '42 factorial' 1405006117752879898543142606244511569936384000000000
Works like a charm. I assume it works on Linux too.
I just tried the same with new download of Pharo 5 and it worked without outputting 'No change' cheers -ben
It depends on your user settings. If and what set of user settings were exported. And maybe, if there is a set if user settings in the old format.
Nice pick up. Better to be less verbose... https://pharo.fogbugz.com/default.asp?19428 cheers -ben
Tim,
On 30 Nov 2016, at 11:26, Tim Mackinnon <tim@testit.works> wrote:
I just tried the new example on the website (factorial is a great example from the command line - I like it).
The output is:
$ ./pharo Pharo.image eval "42 factorial" 'No change' 1405006117752879898543142606244511569936384000000000 $
Out of curiosity, What is the âNo Changeâ message above the answer?
What version are you using, I just tried (on macOS 10.12.1), in a terminal: prometheus:pharo6 sven$ curl get.pharo.org/60+vm | bash % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 2901 100 2901 0 0 2565 0 0:00:01 0:00:01 --:--:-- 2571 Downloading the latest 60 Image: http://files.pharo.org/get-files/60/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/60/pharo-mac-stable.zip pharo-vm/Pharo.app/Contents/MacOS/Pharo Downloading PharoV60.sources: http://files.pharo.org/get-files/60/sources.zip Creating starter scripts pharo and pharo-ui prometheus:pharo6 sven$ ./pharo Pharo.image printVersion [version] 6.0 #60311 prometheus:pharo6 sven$ ./pharo Pharo.image eval '42 factorial' 1405006117752879898543142606244511569936384000000000 Works like a charm. I assume it works on Linux too. HTH, Sven
Tim
On 29 Nov 2016, at 08:41, Esteban Lorenzano <estebanlm@gmail.com> wrote:
yes, but no need⦠I already fixed it :)
On 29 Nov 2016, at 09:29, phil@highoctane.be wrote:
Report them on pharo.fogbugz.com
http://pharo.org/contribute-report-bug
Use Project: Websites as the reference.
Phil
On Tue, Nov 29, 2016 at 12:57 AM, Tim Mackinnon <tim@testit.works> wrote: Hi Guys - how is the best way to report website and text bugs?
As I know the English is not always a first language (and you guys are busy writing code anyway) - its up to us native English speakers to chip in where we can.
I was pleased to get the notice that on OSX Sierra I need to do something extra to get Pharo to work, however the text could be slightly corrected eg. (Bolded words changed)
Are you using macOS Sierra? Due to changes in security policies of macOS, you will need to put the VM in the /Applications folder. We are working to fix this temporary inconvenience.
Also - the Hello world command line example on the front page doesnât work on a standard Terminal on a Mac (you get an error:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello,World!'" -bash: !'": event not found
The culprit is of course the â!â Character so a better example might be:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello World'" Hello WorldStdioStream: 'stdout'
Although, in this case, is it expected that the return string is merged with some other output text (e.g. the StdioStream:â¦.?). I think its an impressive example, but it just doesnât quite look right?
Tim
I found the transcript output from a few days ago when I did it - it was the following (which shows that initial error on the eval example) macta$ curl get.pharo.org | bash % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 12445 100 12445 0 0 235k 0 --:--:-- --:--:-- --:--:-- 238k Downloading the latest 50 Image: http://files.pharo.org/get-files/50/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/50/pharo-mac-stable.zip pharo-vm/Pharo.app/Contents/MacOS/Pharo Downloading PharoV50.sources: http://files.pharo.org/get-files/50/sources.zip Creating starter scripts pharo and pharo-ui macta$ ./pharo Pharo.image eval "Stdio stdout << 'Hello,World!'" -bash: !'": event not found When I then try the print version I also get the same message with that same initial setup that I downloaded? macta$ ./pharo Pharo.image printVersion 'No change' [version] 5.0 #50764 Tim
On 30 Nov 2016, at 16:14, Sven Van Caekenberghe <sven@stfx.eu> wrote:
Tim,
On 30 Nov 2016, at 11:26, Tim Mackinnon <tim@testit.works> wrote:
I just tried the new example on the website (factorial is a great example from the command line - I like it).
The output is:
$ ./pharo Pharo.image eval "42 factorial" 'No change' 1405006117752879898543142606244511569936384000000000 $
Out of curiosity, What is the âNo Changeâ message above the answer?
What version are you using, I just tried (on macOS 10.12.1), in a terminal:
prometheus:pharo6 sven$ curl get.pharo.org/60+vm | bash % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 2901 100 2901 0 0 2565 0 0:00:01 0:00:01 --:--:-- 2571 Downloading the latest 60 Image: http://files.pharo.org/get-files/60/pharo.zip Pharo.image Downloading the latest pharoVM: http://files.pharo.org/get-files/60/pharo-mac-stable.zip pharo-vm/Pharo.app/Contents/MacOS/Pharo Downloading PharoV60.sources: http://files.pharo.org/get-files/60/sources.zip Creating starter scripts pharo and pharo-ui
prometheus:pharo6 sven$ ./pharo Pharo.image printVersion [version] 6.0 #60311
prometheus:pharo6 sven$ ./pharo Pharo.image eval '42 factorial' 1405006117752879898543142606244511569936384000000000
Works like a charm. I assume it works on Linux too.
HTH,
Sven
Tim
On 29 Nov 2016, at 08:41, Esteban Lorenzano <estebanlm@gmail.com> wrote:
yes, but no need⦠I already fixed it :)
On 29 Nov 2016, at 09:29, phil@highoctane.be wrote:
Report them on pharo.fogbugz.com
http://pharo.org/contribute-report-bug
Use Project: Websites as the reference.
Phil
On Tue, Nov 29, 2016 at 12:57 AM, Tim Mackinnon <tim@testit.works> wrote: Hi Guys - how is the best way to report website and text bugs?
As I know the English is not always a first language (and you guys are busy writing code anyway) - its up to us native English speakers to chip in where we can.
I was pleased to get the notice that on OSX Sierra I need to do something extra to get Pharo to work, however the text could be slightly corrected eg. (Bolded words changed)
Are you using macOS Sierra? Due to changes in security policies of macOS, you will need to put the VM in the /Applications folder. We are working to fix this temporary inconvenience.
Also - the Hello world command line example on the front page doesnât work on a standard Terminal on a Mac (you get an error:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello,World!'" -bash: !'": event not found
The culprit is of course the â!â Character so a better example might be:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello World'" Hello WorldStdioStream: 'stdout'
Although, in this case, is it expected that the return string is merged with some other output text (e.g. the StdioStream:â¦.?). I think its an impressive example, but it just doesnât quite look right?
Tim
On Tue, 29 Nov 2016 00:57:36 +0100, Tim Mackinnon <tim@testit.works> wrote:
Hi Guys - how is the best way to report website and text bugs?
As I know the English is not always a first language (and you guys are busy writing code anyway) - its up to us native English speakers >to chip in where we can.
Thank you for this take :)
I was pleased to get the notice that on OSX Sierra I need to do something extra to get Pharo to work, however the text could be slightly
corrected eg. (Bolded words changed)
Are you using macOS Sierra? Due to changes in security policies of macOS, you will need to put the VM in the /Applications folder. We are working to fix this temporary inconvenience.
Also - the Hello world command line example on the front page doesnât work on a standard Terminal on a Mac (you get an error:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello,World!'" -bash: !'": event not found
The culprit is of course the â!â Character so a better example might be:
$ ./pharo Pharo.image eval "Stdio stdout << 'Hello World'" Hello WorldStdioStream: 'stdout'
Although, in this case, is it expected that the return string is merged with some other output text >(e.g. the StdioStream:â¦.?). I think its an impressive example, but it just doesnât quite look right?
Tim
-- Using Opera's mail client: http://www.opera.com/mail/
participants (8)
-
Ben Coman -
Esteban Lorenzano -
Henrik Nergaard -
Nicolai Hess -
phil＠highoctane.be -
stepharo -
Sven Van Caekenberghe -
Tim Mackinnon