- Pharo-dev - lists.pharo.org

Re: [Pharo-project] Getting started with Athens

by Igor Stasenko

On 27 November 2012 22:16, Vanessa PeÃ±a Araya <van.c.pena(a)gmail.com> wrote: > On 11/27/2012 05:55 PM, Igor Stasenko wrote: >> >> On 27 November 2012 21:46, Vanessa PeÃ±a Araya <van.c.pena(a)gmail.com> >> wrote: >>> >>> Hi Esteban, >>> >>> I'm sorry, but I don't understand, which are "the rest of the plugins"? >>> >>> @Dimitri but as far as I understand, when I load the >>> ConfigurationOfAthens >>> it also load NativeBoost, am I wrong? I actually have NativeBoost >>> packages. >>> >> You are correct. Do not load configuration of NativeBoost directly. >> Use Athens configuration, because it depends on a certain version of NB, >> and if you load latest NB, your mileage can vary. > > Yes, I did that. Is there any version of Athens in particular or can I use > the latest? latest is fine. -- Best regards, Igor Stasenko.

Nov. 27, 2012

Re: [Pharo-project] Getting started with Athens

by Camillo Bruni

On 2012-11-27, at 17:55, Igor Stasenko <siguctua(a)gmail.com> wrote: > On 27 November 2012 21:46, Vanessa PeÃ±a Araya <van.c.pena(a)gmail.com> wrote: >> Hi Esteban, >> >> I'm sorry, but I don't understand, which are "the rest of the plugins"? >> >> @Dimitri but as far as I understand, when I load the ConfigurationOfAthens >> it also load NativeBoost, am I wrong? I actually have NativeBoost packages. >> > You are correct. Do not load configuration of NativeBoost directly. > Use Athens configuration, because it depends on a certain version of NB, > and if you load latest NB, your mileage can vary. that's why we have a CI server: https://ci.inria.fr/rmod/job/Athens/

Nov. 27, 2012

Re: [Pharo-project] Getting started with Athens

by Vanessa PeÃ±a Araya

On 11/27/2012 05:55 PM, Igor Stasenko wrote: > On 27 November 2012 21:46, Vanessa PeÃ±a Araya <van.c.pena(a)gmail.com> wrote: >> Hi Esteban, >> >> I'm sorry, but I don't understand, which are "the rest of the plugins"? >> >> @Dimitri but as far as I understand, when I load the ConfigurationOfAthens >> it also load NativeBoost, am I wrong? I actually have NativeBoost packages. >> > You are correct. Do not load configuration of NativeBoost directly. > Use Athens configuration, because it depends on a certain version of NB, > and if you load latest NB, your mileage can vary. Yes, I did that. Is there any version of Athens in particular or can I use the latest? > >> Thanks, >> Vanessa. >> >

Nov. 27, 2012

Re: [Pharo-project] Combining Regular Monticello with Github/FileTree

by Sven Van Caekenberghe

Dale, Max, It might be that I was using an older filetree version, I am just going to overwrite the git files and commit and see from there. It is good to know that it should work. Thx, Sven On 27 Nov 2012, at 21:58, Dale Henrichs <dhenrich(a)vmware.com> wrote: > Sven, > > When viewing changes from the Monticello Browser, there are certain circumstances when the Browser doesn't recognize that the package in a FileTree repository is an ancestor (I haven't fully characterized this, but I have seen it happen - I think it usually happens when the package in FileTree is not a direct ancestor of the in-image package) ... This is the type of thing that happens when packages names have been changed in Monticello as well ... > > In those cases, you be able to _open_ the repository and do a direct comparison of the in-image package and the package in the repository and get a good comparison ... > > Dale > > ----- Original Message ----- > | From: "Sven Van Caekenberghe" <sven(a)stfx.eu> > | To: "Pharo-project(a)lists.gforge.inria.fr Development" <Pharo-project(a)lists.gforge.inria.fr> > | Sent: Tuesday, November 27, 2012 11:56:18 AM > | Subject: [Pharo-project] Combining Regular Monticello with Github/FileTree > | > | Hi, > | > | Before I get too frustrated trying, a quick question: is it possible > | to combine regular monticello with github/filetree ? > | > | I have STON both in ss3 as on github, but it seems I cannot compare > | my in-image ss3 version with a filetree/github repository on disk: > | it reports everything as changed (maybe due to meta data > | differences, I don't know). > | > | How do I know the difference between the ss3 version and the filetree > | version ? > | I guess I could just save the filetree version and let git decide ? > | But maybe, then everything will be different as well ? > | > | Sven > | > | -- > | Sven Van Caekenberghe > | http://stfx.eu > | Smalltalk is the Red Pill > | > | > | > | > | >

Nov. 27, 2012

Re: [Pharo-project] Combining Regular Monticello with Github/FileTree

by Dale Henrichs

Sven, When viewing changes from the Monticello Browser, there are certain circumstances when the Browser doesn't recognize that the package in a FileTree repository is an ancestor (I haven't fully characterized this, but I have seen it happen - I think it usually happens when the package in FileTree is not a direct ancestor of the in-image package) ... This is the type of thing that happens when packages names have been changed in Monticello as well ... In those cases, you be able to _open_ the repository and do a direct comparison of the in-image package and the package in the repository and get a good comparison ... Dale ----- Original Message ----- | From: "Sven Van Caekenberghe" <sven(a)stfx.eu> | To: "Pharo-project(a)lists.gforge.inria.fr Development" <Pharo-project(a)lists.gforge.inria.fr> | Sent: Tuesday, November 27, 2012 11:56:18 AM | Subject: [Pharo-project] Combining Regular Monticello with Github/FileTree | | Hi, | | Before I get too frustrated trying, a quick question: is it possible | to combine regular monticello with github/filetree ? | | I have STON both in ss3 as on github, but it seems I cannot compare | my in-image ss3 version with a filetree/github repository on disk: | it reports everything as changed (maybe due to meta data | differences, I don't know). | | How do I know the difference between the ss3 version and the filetree | version ? | I guess I could just save the filetree version and let git decide ? | But maybe, then everything will be different as well ? | | Sven | | -- | Sven Van Caekenberghe | http://stfx.eu | Smalltalk is the Red Pill | | | | |

Nov. 27, 2012

Re: [Pharo-project] Getting started with Athens

by Igor Stasenko

On 27 November 2012 21:46, Vanessa PeÃ±a Araya <van.c.pena(a)gmail.com> wrote: > Hi Esteban, > > I'm sorry, but I don't understand, which are "the rest of the plugins"? > > @Dimitri but as far as I understand, when I load the ConfigurationOfAthens > it also load NativeBoost, am I wrong? I actually have NativeBoost packages. > You are correct. Do not load configuration of NativeBoost directly. Use Athens configuration, because it depends on a certain version of NB, and if you load latest NB, your mileage can vary. > Thanks, > Vanessa. > -- Best regards, Igor Stasenko.

Nov. 27, 2012

[Pharo-project] a probably stupid question on canvas

by StÃ©phane Ducasse

Hi guys I was wondering why we need a separate class named AlphaBlendingCanvas Igor can you have a look and depending on your answer I will put it on my todo list. Stef ?

Nov. 27, 2012

Re: [Pharo-project] Getting started with Athens

by Vanessa PeÃ±a Araya

Hi Esteban, I'm sorry, but I don't understand, which are "the rest of the plugins"? @Dimitri but as far as I understand, when I load the ConfigurationOfAthens it also load NativeBoost, am I wrong? I actually have NativeBoost packages. Thanks, Vanessa. On 11/27/2012 05:29 PM, Esteban Lorenzano wrote: > make a symlink (assuming you are working on linux/mac) where the rest of the plugins are. > > Esteban > > On Nov 27, 2012, at 9:19 PM, Vanessa PeÃ±a Araya <van.c.pena(a)gmail.com> wrote: > >> Hi Sebastian and Esteban, >> >> Thanks for replying. I checked and I already have the libcairo2 installed. I actually can see Roassal working with Cairo in VW so I guess that's ok. I use a 32bits Ubuntu. >> >> But I still can't make it work :( This error in particular is because the connection with cairo? >> >> Thanks, >> Vanessa. >> >> >> On 11/27/2012 01:46 PM, Esteban Lorenzano wrote: >>> be sure to install the 32bits version >>> >>> >>> On Nov 27, 2012, at 5:37 PM, Sebastian Nozzi <sebnozzi(a)gmail.com> wrote: >>> >>>> Hello Araya, >>>> >>>> you might still need to install the library for your host operating system. >>>> >>>> See here: >>>> >>>> http://www.pharocasts.com/2012/06/athens-and-native-boost-at-work.html >>>> >>>> For Debian/Ubuntu systems you would need to do: >>>> >>>> apt-get install libcairo2 # as root in Debian >>>> >>>> Or: >>>> >>>> sudo apt-get install libcairo2 # as non-root in Ubuntu >>>> >>>> Hope this helps! >>>> >>>> Sebastian >>>> >>>> P.S. Future versions of Pharo, if I'm not mistaken, will include this >>>> dependency... ? >>>> >>>> >>>> 2012/11/27 Vanessa PeÃ±a Araya <van.c.pena(a)gmail.com>: >>>>> Hi, >>>>> >>>>> I'm trying to get started with Athens but I'm having the following errors: >>>>> >>>>> Pharo 1.4, loaded last version configurationOfAthens: >>>>> 'failed to get a symbol address: cairo_image_surface_create' >>>>> >>>>> I also tried in this in a 2.0 image and I got the same error. >>>>> >>>>> I'm trying with this VM: >>>>> >>>>> https://ci.lille.inria.fr/pharo/view/Cog/job/NativeBoost-Cog-VM/Architectur… >>>>> >>>>> Any help, please? :) >>>>> >>>>> Thanks, >>>>> Vanessa. >>> >> > >

Nov. 27, 2012

[Pharo-project] fixed smartcharacters

by StÃ©phane Ducasse

Hi guys now with this change set the behavior when selected a piece of code is the same with smart char than the default behavior. aaaa + ' -> 'aaaa' 'aaaa' + ' -> aaaaa Stef

Nov. 27, 2012

Re: [Pharo-project] Combining Regular Monticello with Github/FileTree

by Max Leske

Hi Sven I have a filetree repo for github and do parallel commits to ss3. I don't have any issues with diffing. You can try yourself if you want to: ss3: http://ss3.gemstone.com/ss/FileSystem-Git.html github: https://github.com/dalehenrich/FSGit/tree/experimental Cheers, Max On 27.11.2012, at 20:56, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: > Hi, > > Before I get too frustrated trying, a quick question: is it possible to combine regular monticello with github/filetree ? > > I have STON both in ss3 as on github, but it seems I cannot compare my in-image ss3 version with a filetree/github repository on disk: it reports everything as changed (maybe due to meta data differences, I don't know). > > How do I know the difference between the ss3 version and the filetree version ? > I guess I could just save the filetree version and let git decide ? > But maybe, then everything will be different as well ? > > Sven > > -- > Sven Van Caekenberghe > http://stfx.eu > Smalltalk is the Red Pill > > > >

Nov. 27, 2012