- Pharo-dev - lists.pharo.org

Re: [Pharo-project] CI link to matching VM

by Igor Stasenko

On 30 April 2013 18:38, Ben Coman <btc(a)openinworld.com> wrote: > > not sure if this is a broader question than just Moose CI, so I'm posting > here.... > > I just downloaded latest Moose image from [1] and want to download the > matching VM used for the CI testing, but its not obvious which one. > Could maybe a VM link be added to the page as artifact, upstream project or > permalink ? Or am I missing something ? > > [1] https://ci.inria.fr/moose/job/moose-latest-dev-4.8/ > > cheers -ben > <https://ci.inria.fr/moose/job/moose-latest-dev-4.8/> > i cannot see the config of that job, so i cannot tell. (btw old jenkins setup has useful plugin to see the config by visitors in r/o mode) it would be nice to have it in current one. -- Best regards, Igor Stasenko.

May 1, 2013

Re: [Pharo-project] Moment of fun

by Alexandre Bergel

Another useful ones: Smalltalk garbageCollect Object browse Object halt Object haltOnce Object inspect On Apr 30, 2013, at 3:52 PM, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: > Hi guys > > I would like to build a small lectures based on all the small little crazy expressions that we use > like > > StandardWindow allInstances do: #close. > > or > > myObject pointersTo > > or > > anObject become: String new. > > Do you have some cool expressions to share with me. > > Stef -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.

May 1, 2013

Re: [Pharo-project] record system change

by Igor Stasenko

On 1 May 2013 01:50, Camillo Bruni <camillobruni(a)gmail.com> wrote: > How to record a complete system change in Pharo? > > http://stackoverflow.com/questions/16310736/how-to-record-a-complete-system… > > That must have been done somewhere in once of those fancy analysis tools, no? Here's troll's answer: - snapshot image before change - snapshot after - do a binary diff ;) because, without limiting the scope of observed changes, this is the only way. Another troll's answer: - find a way to properly track changes of code which tracking changes. means that: oldEnvironment := Environment current serialize. changeBlock value. "here, Environment may not exist anymore, or don't understand #current nor #difference: " diff := oldEnvironment difference: Environment current if you can do that, then you can do anything else, i believe. :) -- Best regards, Igor Stasenko.

May 1, 2013

[Pharo-project] record system change

by Camillo Bruni

How to record a complete system change in Pharo? http://stackoverflow.com/questions/16310736/how-to-record-a-complete-system… That must have been done somewhere in once of those fancy analysis tools, no?

April 30, 2013

Re: [Pharo-project] Moment of fun

by Igor Stasenko

| recursion | ( recursion := [ recursion value ] ) value On 30 April 2013 23:56, Eliot Miranda <eliot.miranda(a)gmail.com> wrote: > > > > On Tue, Apr 30, 2013 at 12:52 PM, StÃ©phane Ducasse > <stephane.ducasse(a)inria.fr> wrote: >> >> Hi guys >> >> I would like to build a small lectures based on all the small little >> crazy expressions that we use >> like >> >> StandardWindow allInstances do: #close. >> >> or >> >> myObject pointersTo >> >> or >> >> anObject become: String new. >> >> Do you have some cool expressions to share with me. >> >> Stef > > > my favourite, used to lock up Smalltalk VMs: > > | pair | > pair := { #perform:withArguments:. nil }. > pair at: 2 put: pair. > pair perform: pair first withArguments: pair. > > -- > best, > Eliot -- Best regards, Igor Stasenko.

April 30, 2013

Re: [Pharo-project] Moment of fun

by Alexandre Bergel

Eliot, you're insane :-) A useful one: Debugger closeAllDebuggers Alexandre > | pair | > pair := { #perform:withArguments:. nil }. > pair at: 2 put: pair. > pair perform: pair first withArguments: pair. -- _,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;: Alexandre Bergel http://www.bergel.eu ^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;._,.;:~^~:;.

April 30, 2013

Re: [Pharo-project] froze image just

by Camillo Bruni

On 2013-04-30, at 23:39, Sven Van Caekenberghe <sven(a)stfx.eu> wrote: > > On 30 Apr 2013, at 22:44, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: > >> trying to publish a slice on my harddisc without networkâ¦. >> and I could not interrupt anything. >> No cmd+. no interdiction sign did anything :( >> >> So is it normal? >> Not being able to interrupt something is a pain. I experience similar issues with internet and missing passwords :) > Could be networking related, publishing a slice needs many network interactions, most of them are retried at least once; they all have to time out. The default timeout is 30s. > > On the other hand, I just turned off my wireless network and tried an MC operation and it immediately throws an NameLookupFailure exception, way before the 30s deadline. > > Sven

April 30, 2013

Re: [Pharo-project] Moment of fun

by Eliot Miranda

On Tue, Apr 30, 2013 at 12:52 PM, StÃ©phane Ducasse < stephane.ducasse(a)inria.fr> wrote: > Hi guys > > I would like to build a small lectures based on all the small little crazy > expressions that we use > like > > StandardWindow allInstances do: #close. > > or > > myObject pointersTo > > or > > anObject become: String new. > > Do you have some cool expressions to share with me. > > Stef > my favourite, used to lock up Smalltalk VMs: | pair | pair := { #perform:withArguments:. nil }. pair at: 2 put: pair. pair perform: pair first withArguments: pair. -- best, Eliot

April 30, 2013

Re: [Pharo-project] froze image just

by Sven Van Caekenberghe

On 30 Apr 2013, at 22:44, StÃ©phane Ducasse <stephane.ducasse(a)inria.fr> wrote: > trying to publish a slice on my harddisc without networkâ¦. > and I could not interrupt anything. > No cmd+. no interdiction sign did anything :( > > So is it normal? > Not being able to interrupt something is a pain. > > stef Could be networking related, publishing a slice needs many network interactions, most of them are retried at least once; they all have to time out. The default timeout is 30s. On the other hand, I just turned off my wireless network and tried an MC operation and it immediately throws an NameLookupFailure exception, way before the 30s deadline. Sven -- Sven Van Caekenberghe Proudly supporting Pharo http://pharo.org http://association.pharo.org http://consortium.pharo.org

April 30, 2013

Re: [Pharo-project] 512 MB is not that much (Windows limit) WAS: RE: Opal Decompiler status

by stephane ducasse

Hi I think that you have some points :) Indeed for Moose we should pay attention because we often deploy on windows. > I wouldn't oppose to having the sources (or the AST or whatever ;-) in [object-]memory, although retaining the option of _also_ still writing all the changes into an external changelog (in case of VM, or the less rare case, Windows crashes). > > But no, we don't have "enough memory" (although now is perhaps the time to announce that "64GB ought to be enough for anybody" ;-))). > >> (the $25 Raspi comes with 256MB, the $35 with 512MB.) > > Incidentally, ~512 MB is the max you can get on Windows (otherwise crash after an ugly ~ 30 sec freeze; I checked sometime around the 2.0 release), and this is not enough for some applications. > > The Moose people complained a few years back (unable to, on Windows, load a large but otherwise fine image saved on Mac), the only solution offered was "change a #DEFINE or makefile or something like that and rebuild the VM, then pray it works". > > Currently I avoid using Pharo in case I even suspect the app might come anywhere near that limit (to avoid nasty surprises / hasty rewrites later). > > Only problems I've heard of concerning DLL's mapped at "weird" offsets in address space (this was cited as reason for the memory limit) were related to trojan horses / stealth viruses tampering with system, and anti-virus / anti-malware SW doing basically the same ;-))) Or something getting loaded really early, geting the DLL - in this case it was kernel.dll - mapped at unusual offset which then got re-used for all other applications, but this was mentioned in context where in the end they were unable to allocate sufficiently large block of contiguous memory because something was siting in the middle of address space - and i _think_ think it was concerning LuaJIT. > > Would it be possible to prod Jenkins to produce (additional) windows builds with the limit lifted (or set to 2 GB; optionally perhaps a 1GB build) ? So interested testers could try them - as the problem was reported as only manifesting on some comps., while others ran completely fine. I think somebody mentioned that thanks to Jenkins it is/will be a childs play to add/clone another build(s). yes this is a good idea. > IMO it would be great to do some larger-scale testing whether this problem still manifests itself and if so whether it could be worked around, or traced to whatever fucks windows up so they load DLL into the middle of the address space ... And lot more people would participate if "build your own VM" would be an optional step (I know, it's not that hard, and setting up mingw or msvc is not that hard either, but it takes a few hours to get it all up & running). > > I've "played with" (used to solve actual problems / write applications which are used in production, i just got to choose the language ...) a LOT of prog. langs, and I don't remember this problem mentioned elsewhere. Clearly we pay the lag of not moving. > > For example SBCL, Smalltalk/X, Factor, SWI Prolog, Haskell (a few very different - on the inside as much as on the outside - examples) are able to utilise the whole 2GB (if your windows are configured to the standard 2GB/2GB user/kernel space split). Even that abomination that starts with letter J and is touted as The_Only_VM_and_Language is able to utilize ~1.5 GB on a 32bit system. Yes they probably put also lot of money on the table. > I'd be able & willing to test on XP/32 and Win7/32+64. I can even test on ~300 machines, although there are only a few hardware configurations, and all are installed according to the same template and mainly use the same software and antivirus. So it's probably not nearly as interesting as 30 totally random machines ... > > Anybody else thinks this sounds like a good idea ? Yes > > -----Original Message----- > From: pharo-project-bounces(a)lists.gforge.inria.fr [mailto:pharo-project-bounces@lists.gforge.inria.fr] On Behalf Of Marcus Denker > Sent: Saturday, April 27, 2013 7:08 PM > To: Pharo-project(a)lists.gforge.inria.fr > Subject: Re: [Pharo-project] Opal Decompiler status > > > On Apr 27, 2013, at 6:42 PM, Nicolas Cellier <nicolas.cellier.aka.nice(a)gmail.com> wrote: > >> Thanks Marcus. >> I'm among the skepticals concerning the AST, but I'd like to be proven wrong, because AST level would certainly simplify things a lot. >> My main reserve is that interruption can occur at BC level, so for debugging purpose, what are your plans? >> Will you move the PC at some AST node boundary (if it is possible given side effects of some BC)? >> > For the Debugger, everything stays as it is (until Pharo 4 or so). if you look at it, the current Debugger never decompiles if there is source available. > It *compiles* to get > -> the mapping BC -> text > -> the information how temporary variables in the byte code are actually related to temps in the source. > (this is very complex, temps can be e.g. stored on the heap if they are written to in a closure, and when they are just > read they have a different offset in each closure they are in. Conversely, some temps in the byte code are used > to store the array that hold the variables that are on the heap.) > > The old compiler recorded mappings while compiling that where encoded. quite complex, at least for my tiny brain. > > So the new just keeps the AST annotated with all the needed infos, this is much easier to debug (and we do have the > memory these days, and as we cache the AST, it's even fast). > > So the debugger needs the compiler. The decompiler now exists just to make text so that we can call the compiler > in the case there is no .sources. The debugger *always* compiles to get the mappings, as soon as there is source code > the decompiler will never be used. (and even if the decompiler is used, the compiler is called right after on it's results so > one can record the mappings). > > So if you make sure there is always source-code (or a representation with the right amount of meta data), you don't need the decompiler. > > So at the start it will be the source code. And yes, this takes memory. But we are in 2013 and if we have one thing than it's memory. > (the $25 Raspi comes with 256MB, the $35 with 512MB.). > > We could have shipped 2.0 with 8MB of useless Monticello meta data and nobody would have even realized it. (like we > have now megabytes of fonts in the image.). Yet the source is special. I really wonder why. > > (And yes, there should be solutions to not need unused data in main memory and solutions to share across multiple images > data that is the same. but for all kinds of stuff, not just source code). > > Marcus >

April 30, 2013