- Pharo-dev - lists.pharo.org

Re: [Pharo-dev] Is it possible to load and display pdfs inside pharo ?

by StÃ©phane Ducasse

So far I do not think so but I know that the open-source library of pdf developed by christian Haider on VW can do it. Stef > I was wondering if there is a library to load and display or at least parse pdf files for pharo. >

Dec. 13, 2013

Re: [Pharo-dev] Tell me about your workflow

by GOUBIER Thierry

gitfiletree can be had this way (filetree is already in 3.0, gitfiletree is in the filetree configuration for Pharo 3.0 but is a bit hard to load). pharo/pharo pharo/Pharo.image config http://smalltalkhub.com/Pharo/MetaRepoForPharo30/main/ ConfigurationOfOSProcess --install=stable pharo/pharo pharo/Pharo.image eval --save Gofer new url:\'http://smalltalkhub.com/mc/ThierryGoubier/Alt30/main\'\; package: \'MonticelloFileTree-Git\'\; load Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] Date d'envoi : vendredi 13 dÃ©cembre 2013 14:57 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow I can try a forced load on a 3.0 ignoring requisites for testing purposes but I'm using this: https://github.com/dalehenrich/filetree I'm not sure what you're are using can you clarify? On Dec 13, 2013, at 11:43 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: Ok. I'll try Roassal on a slow netbook to see. I don't see a factor of 10 difference between yours and Roassal, so I'll have a look. Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com>] Date d'envoi : vendredi 13 dÃ©cembre 2013 14:32 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow A bit. This is from today's current version (and is not all, it's only the two biggest packages): (MCPackage named: 'flow') workingCopy packageInfo classes size. 363. (MCPackage named: 'flow') workingCopy packageInfo coreMethods size. 4585. (MCPackage named: 'airflowing') workingCopy packageInfo classes size. 377. (MCPackage named: 'airflowing') workingCopy packageInfo coreMethods size. 5818. On Dec 13, 2013, at 11:25 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: Roassal: 3493 Number of versions in the package history: 733. Size of the version file: 202796. Is that a lot lower than your count? Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com>] Date d'envoi : vendredi 13 dÃ©cembre 2013 13:34 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow how many coreMethods? On Dec 13, 2013, at 7:00 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: Bad news. Roassal package directory has 355 entries (343 classes + a few extensions) and I don't see much of a slow down (on 3.0). It's not instantaneous, but with a bit of feedback, it doesn't seems long. I'll do some profiling. Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de GOUBIER Thierry Date d'envoi : jeudi 12 dÃ©cembre 2013 17:07 Ã : Pharo Development List Objet : [PROVENANCE INTERNET] Re: [Pharo-dev] Tell me about your workflow Thanks for the pointers. I'll look at Seaside/Moose/Mondrian and Roassal, because I need code I can load and save in an image without destroying the very image I use to test (which would happen if I load Pharo10 stuff in a 3.0 image ;) ). Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Yuriy Tymchuk [yuriy.tymchuk(a)me.com<mailto:yuriy.tymchuk@me.com>] Date d'envoi : jeudi 12 dÃ©cembre 2013 16:24 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow So if you want something big and with a lot of commits you can use Pharo* in general. Pharo10 has the most versions and Pharo30Inbox is the largest one. If you want some other projects then you heve to take a look at Seaside30, Mondrian, Moose, Glamour or Roassal. Uko On 12 Dec 2013, at 16:20, Yuriy Tymchuk <yuriy.tymchuk(a)me.com<mailto:yuriy.tymchuk@me.com>> wrote: Pharo10 on SmalltalkHub is humongous. You can definitely do a stress test with it :) Uko On 12 Dec 2013, at 15:43, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: I would need a large project, composed of one or more packages, with more than 150~200 classes, which triggers the slow read and writing times Sebastian experience. And, probably, to be complete, a long and complex commit history in git (> 100 commits). I'll keep in mind the idea of creating one randomly ;) Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Yuriy Tymchuk [yuriy.tymchuk(a)me.com<mailto:yuriy.tymchuk@me.com>] Date d'envoi : jeudi 12 dÃ©cembre 2013 15:37 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow Are you interested in a package or a project? I can provide you information based on size, etcâ¦ Uko On 12 Dec 2013, at 15:30, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: I gave up running gitfiletree on 1.4 :( It's possible to use gitfiletree from a 2.0 or a 3.0 image to browse your git repository, but testing the writing will be an issue. My best chance would be to find a large enough package I can use on 2.0 or 3.0 to test and profile. Does anybody has a large enough package which could fit? Anything that doesn't require a NDA to read it, of course. Is Roassal large enough? Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com>] Date d'envoi : jeudi 12 dÃ©cembre 2013 12:12 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow gee the big code package is airflowing which I have, quite conservatively, running on #14438 images I load filetree like this: Gofer new url: 'http://ss3.gemstone.com/ss/FileTree'; package: 'ConfigurationOfFileTree'; load. ((Smalltalk at: #ConfigurationOfFileTree) project version: #'stable') load. and it never complained let me know On Dec 12, 2013, at 3:53 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: If you would be ready to profile a package save on your repository, it would be great. In the mean time, I'll make available a special gitfiletree package to test. Which version of Pharo you are using? 2.0 or 3.0? Regards, Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com>] Date d'envoi : mercredi 11 dÃ©cembre 2013 17:09 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow ok, if saving is dumping all, then 3 is confirmed? After the first commit, I'd say so. about 2, I don't know. I'm available to make tests and measure results have a nice trip, keep us tuned about any progress On Dec 11, 2013, at 2:09 PM, Goubier Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: Yes, you're right in the general case. But a solution to that general problem will take time to be implemented (time I lack at the moment, sadly) and if the main gain is a few % because it's writing the version file and the metadata for methods which are the "slow" factors, then we'll have worked hard for nothing. If you want to help, I'd really like to see either 2- or 3- confirmed. I can produce a special gitfiletree to remove writing the metadata, that you can try on a large project temporary copy; if the slow writing (and reading) is confirmed, then this is 3- (But I'm leaving on a trip tomorrow early, so I have no idea of when I'll have the time to do that :( ). Thierry Le 11/12/2013 16:44, Sebastian Sastre a Ã©crit : Without entering in details, a cause for slow package write is dumping all every time. For that strategy, we already have the image save which is magically fast. So, if we make something to scan the code and write only when it's different from what's on disk, then we would be preventing tons of redundant writes sebastian <https://about.me/sebastianconcept> o/ On Dec 11, 2013, at 1:43 PM, Goubier Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr>> wrote: Le 11/12/2013 16:27, Esteban Lorenzano a Ã©crit : ah, and IMHO the problem is not about reading... is about writing (if it has to write the metadata each time...). But, personnaly, I don't know if this is the reason for the lack of performance... I have three hypothesis for Sebastian problem: 1 - Slow read time for version metadata - Confirmed because of the 16 seconds wait time for reading the package metadata in the repository browser. 2 - Slow metadata write 3 - Slow package write I have an implemented solution for 1-, a very easy to implement for 2-, and none yet for 3- So I'd really like to check if 3- is confirmed ;) Thierry Esteban On Wed, Dec 11, 2013 at 4:24 PM, Esteban Lorenzano <estebanlm(a)gmail.com<mailto:estebanlm@gmail.com> <mailto:estebanlm@gmail.com> <mailto:estebanlm@gmail.com>> wrote: Thierry, I know there is a working version... let me search... (5 mins later) here: https://github.com/rjsargent/CypressReferenceImplementation Dale says Richard made a metadata-less version. We should take a look at that. Esteban On Wed, Dec 11, 2013 at 4:28 PM, Goubier Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr><mailto:thierry.goubier@cea.fr>> wrote: Esteban, Sebastian, In the filetree code, you will find a format without metadata, but it's not in use anymore. If you use gitfiletree, it will write the metadata for compatibility reasons with filetree, but it will never read it back. I'm pushing code to make filetree robust to absence of metadata, but I haven't worked on it for a while. gitfiletree has solved the problem of a slow metadata read. It does not solve any performance problem associated with writing, yet. Thierry Le 11/12/2013 16:12, Esteban Lorenzano a Ã©crit : I know there is a version of filetree without metadata (more compelling for projects that will never use other formats). Dale told me that there was a preview somewhere, but I didn't tested yet (lack of time) and now I cannot find the mail... Dale, can you re-send the link? cheers, Esteban On Wed, Dec 11, 2013 at 4:08 PM, Sebastian Sastre <sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com> <mailto:sebastian@flowingconcept.com> <mailto:sebastian@flowingconcept.com> <mailto:sebastian@__flowingconcept.com <mailto:sebastian@flowingconcept.com>>> wrote: I should breath before I type, but you probably already got that I meant /redundant writes/ (not reads)... Anyway.. I was talking with Esteban and he mentions some kind of compatibility metadata. If I'm going to give a leap of faith to filetree repos to save code why should I care about mcz compatibility? Paying a toll for no reason is evil. Maybe we could make that optional so those who don't extract value from that feature can opt-out? sebastian <https://about.me/__sebastianconcept <https://about.me/sebastianconcept>> o/ On Dec 11, 2013, at 12:44 PM, Sebastian Sastre <sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com> <mailto:sebastian@flowingconcept.com> <mailto:sebastian@flowingconcept.com> <mailto:sebastian@__flowingconcept.com <mailto:sebastian@flowingconcept.com>>> wrote: Hi Thierry On Dec 11, 2013, at 12:43 PM, Goubier Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr <mailto:thierry.goubier@cea.fr>__>> wrote: I have packages (in the order of hundreds of classes) and save delays and package click delays are starting to demand patience in a way that doesn't feel like the right path Which operations ? I didn't remember noticing much with 179 classes on a laptop without a SSD. choose one. Just for clicking the package that will should you UUID, version and author I need to wait ~16 seconds. Sounds like a lot of overhead for reading a small .json file. But the write is the most worrisome All that is with a SSD disk, otherwise save delays would be /way/ beyond unacceptable I'd like to know more, and understand the reason, for sure. As far as I know, filetree will rewrite the whole package to disk everytime... and maybe optimising that could be the solution. Well, that explains a lot. Writing all every time is the lazy thing that's okay for a prototype and temporary code in a proof of concept but that massive redundant reads certainly doesn't sounds like pro software. Specially for SSD's which has a limited quantity of writes Thierry sebastian <https://about.me/__sebastianconcept <https://about.me/sebastianconcept>> o/ -- Thierry Goubier CEA list Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s 91191 Gif sur Yvette Cedex France Phone/Fax: +33 (0) 1 69 08 32 92 <tel:%2B33%20%280%29%201%2069%2008%2032%2092> <tel:%2B33%20%280%29%201%2069%__2008%2032%2092> / 83 95 -- Thierry Goubier CEA list Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s 91191 Gif sur Yvette Cedex France Phone/Fax: +33 (0) 1 69 08 32 92 <tel:%2B33%20%280%29%201%2069%2008%2032%2092> / 83 95 -- Thierry Goubier CEA list Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s 91191 Gif sur Yvette Cedex France Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95 -- Thierry Goubier CEA list Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s 91191 Gif sur Yvette Cedex France Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95

Dec. 13, 2013

Re: [Pharo-dev] Commit right to Pharo30Inbox

by Esteban Lorenzano

done :) On Fri, Dec 13, 2013 at 2:51 PM, <wm(a)fastmail.fm> wrote: > Hi list. > I want to submit a SLICE to the pharo inbox, can you grant me commit > rights? > > username: MartinWalk > > thanks! > >

Dec. 13, 2013

Re: [Pharo-dev] Tell me about your workflow

by Sebastian Sastre

I can try a forced load on a 3.0 ignoring requisites for testing purposes but I'm using this: https://github.com/dalehenrich/filetree I'm not sure what you're are using can you clarify? On Dec 13, 2013, at 11:43 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: > Ok. I'll try Roassal on a slow netbook to see. I don't see a factor of 10 difference between yours and Roassal, so I'll have a look. > > Thierry > De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] > Date d'envoi : vendredi 13 dÃ©cembre 2013 14:32 > Ã : Pharo Development List > Objet : Re: [Pharo-dev] Tell me about your workflow > > A bit. > > This is from today's current version (and is not all, it's only the two biggest packages): > > (MCPackage named: 'flow') workingCopy packageInfo classes size. 363. > (MCPackage named: 'flow') workingCopy packageInfo coreMethods size. 4585. > > (MCPackage named: 'airflowing') workingCopy packageInfo classes size. 377. > (MCPackage named: 'airflowing') workingCopy packageInfo coreMethods size. 5818. > > > > > > > > On Dec 13, 2013, at 11:25 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: > >> Roassal: 3493 >> >> Number of versions in the package history: 733. Size of the version file: 202796. >> >> Is that a lot lower than your count? >> >> Thierry >> >> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >> Date d'envoi : vendredi 13 dÃ©cembre 2013 13:34 >> Ã : Pharo Development List >> Objet : Re: [Pharo-dev] Tell me about your workflow >> >> how many coreMethods? >> >> >> >> >> On Dec 13, 2013, at 7:00 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >> >>> Bad news. Roassal package directory has 355 entries (343 classes + a few extensions) and I don't see much of a slow down (on 3.0). It's not instantaneous, but with a bit of feedback, it doesn't seems long. >>> >>> I'll do some profiling. >>> >>> Thierry >>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de GOUBIER Thierry >>> Date d'envoi : jeudi 12 dÃ©cembre 2013 17:07 >>> Ã : Pharo Development List >>> Objet : [PROVENANCE INTERNET] Re: [Pharo-dev] Tell me about your workflow >>> >>> Thanks for the pointers. >>> >>> I'll look at Seaside/Moose/Mondrian and Roassal, because I need code I can load and save in an image without destroying the very image I use to test (which would happen if I load Pharo10 stuff in a 3.0 image ;) ). >>> >>> Thierry >>> >>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Yuriy Tymchuk [yuriy.tymchuk(a)me.com] >>> Date d'envoi : jeudi 12 dÃ©cembre 2013 16:24 >>> Ã : Pharo Development List >>> Objet : Re: [Pharo-dev] Tell me about your workflow >>> >>> So if you want something big and with a lot of commits you can use Pharo* in general. Pharo10 has the most versions and Pharo30Inbox is the largest one. If you want some other projects then you heve to take a look at Seaside30, Mondrian, Moose, Glamour or Roassal. >>> >>> Uko >>> >>> On 12 Dec 2013, at 16:20, Yuriy Tymchuk <yuriy.tymchuk(a)me.com> wrote: >>> >>>> Pharo10 on SmalltalkHub is humongous. You can definitely do a stress test with it :) >>>> >>>> Uko >>>> >>>> On 12 Dec 2013, at 15:43, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>>> >>>>> I would need a large project, composed of one or more packages, with more than 150~200 classes, which triggers the slow read and writing times Sebastian experience. And, probably, to be complete, a long and complex commit history in git (> 100 commits). >>>>> >>>>> I'll keep in mind the idea of creating one randomly ;) >>>>> >>>>> Thierry >>>>> >>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Yuriy Tymchuk [yuriy.tymchuk(a)me.com] >>>>> Date d'envoi : jeudi 12 dÃ©cembre 2013 15:37 >>>>> Ã : Pharo Development List >>>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>>> >>>>> Are you interested in a package or a project? I can provide you information based on size, etcâ¦ >>>>> >>>>> Uko >>>>> >>>>> On 12 Dec 2013, at 15:30, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>>>> >>>>>> I gave up running gitfiletree on 1.4 :( >>>>>> >>>>>> It's possible to use gitfiletree from a 2.0 or a 3.0 image to browse your git repository, but testing the writing will be an issue. >>>>>> >>>>>> My best chance would be to find a large enough package I can use on 2.0 or 3.0 to test and profile. Does anybody has a large enough package which could fit? Anything that doesn't require a NDA to read it, of course. Is Roassal large enough? >>>>>> >>>>>> Thierry >>>>>> >>>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >>>>>> Date d'envoi : jeudi 12 dÃ©cembre 2013 12:12 >>>>>> Ã : Pharo Development List >>>>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>>>> >>>>>> gee the big code package is airflowing which I have, quite conservatively, running on #14438 images >>>>>> >>>>>> I load filetree like this: >>>>>> >>>>>> Gofer new >>>>>> url: 'http://ss3.gemstone.com/ss/FileTree'; >>>>>> package: 'ConfigurationOfFileTree'; >>>>>> load. >>>>>> ((Smalltalk at: #ConfigurationOfFileTree) project version: #'stable') load. >>>>>> >>>>>> and it never complained >>>>>> >>>>>> let me know >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Dec 12, 2013, at 3:53 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>>>>> >>>>>>> If you would be ready to profile a package save on your repository, it would be great. In the mean time, I'll make available a special gitfiletree package to test. Which version of Pharo you are using? 2.0 or 3.0? >>>>>>> >>>>>>> Regards, >>>>>>> >>>>>>> Thierry >>>>>>> >>>>>>> >>>>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >>>>>>> Date d'envoi : mercredi 11 dÃ©cembre 2013 17:09 >>>>>>> Ã : Pharo Development List >>>>>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>>>>> >>>>>>> ok, if saving is dumping all, then 3 is confirmed? After the first commit, I'd say so. >>>>>>> >>>>>>> about 2, I don't know. I'm available to make tests and measure results >>>>>>> >>>>>>> have a nice trip, keep us tuned about any progress >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> On Dec 11, 2013, at 2:09 PM, Goubier Thierry <thierry.goubier(a)cea.fr> wrote: >>>>>>> >>>>>>>> Yes, you're right in the general case. >>>>>>>> >>>>>>>> But a solution to that general problem will take time to be implemented (time I lack at the moment, sadly) and if the main gain is a few % because it's writing the version file and the metadata for methods which are the "slow" factors, then we'll have worked hard for nothing. >>>>>>>> >>>>>>>> If you want to help, I'd really like to see either 2- or 3- confirmed. I can produce a special gitfiletree to remove writing the metadata, that you can try on a large project temporary copy; if the slow writing (and reading) is confirmed, then this is 3- >>>>>>>> >>>>>>>> (But I'm leaving on a trip tomorrow early, so I have no idea of when I'll have the time to do that :( ). >>>>>>>> >>>>>>>> Thierry >>>>>>>> >>>>>>>> Le 11/12/2013 16:44, Sebastian Sastre a Ã©crit : >>>>>>>>> Without entering in details, a cause for slow package write is dumping >>>>>>>>> all every time. >>>>>>>>> >>>>>>>>> For that strategy, we already have the image save which is magically fast. >>>>>>>>> >>>>>>>>> So, if we make something to scan the code and write only when it's >>>>>>>>> different from what's on disk, then we would be preventing tons of >>>>>>>>> redundant writes >>>>>>>>> >>>>>>>>> sebastian <https://about.me/sebastianconcept> >>>>>>>>> >>>>>>>>> o/ >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On Dec 11, 2013, at 1:43 PM, Goubier Thierry <thierry.goubier(a)cea.fr >>>>>>>>> <mailto:thierry.goubier@cea.fr>> wrote: >>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Le 11/12/2013 16:27, Esteban Lorenzano a Ã©crit : >>>>>>>>>>> ah, and IMHO the problem is not about reading... is about writing (if it >>>>>>>>>>> has to write the metadata each time...). >>>>>>>>>> >>>>>>>>>> But, personnaly, I don't know if this is the reason for the lack of >>>>>>>>>> performance... >>>>>>>>>> >>>>>>>>>> I have three hypothesis for Sebastian problem: >>>>>>>>>> 1 - Slow read time for version metadata >>>>>>>>>> - Confirmed because of the 16 seconds wait time for reading the >>>>>>>>>> package metadata in the repository browser. >>>>>>>>>> 2 - Slow metadata write >>>>>>>>>> 3 - Slow package write >>>>>>>>>> >>>>>>>>>> I have an implemented solution for 1-, a very easy to implement for >>>>>>>>>> 2-, and none yet for 3- >>>>>>>>>> >>>>>>>>>> So I'd really like to check if 3- is confirmed ;) >>>>>>>>>> >>>>>>>>>> Thierry >>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Esteban >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Wed, Dec 11, 2013 at 4:24 PM, Esteban Lorenzano >>>>>>>>>>> <estebanlm(a)gmail.com <mailto:estebanlm@gmail.com> >>>>>>>>>>> <mailto:estebanlm@gmail.com>> wrote: >>>>>>>>>>> >>>>>>>>>>> Thierry, I know there is a working version... let me search... >>>>>>>>>>> >>>>>>>>>>> (5 mins later) >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> here: >>>>>>>>>>> >>>>>>>>>>> https://github.com/rjsargent/CypressReferenceImplementation >>>>>>>>>>> >>>>>>>>>>> Dale says Richard made a metadata-less version. >>>>>>>>>>> >>>>>>>>>>> We should take a look at that. >>>>>>>>>>> >>>>>>>>>>> Esteban >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Wed, Dec 11, 2013 at 4:28 PM, Goubier Thierry >>>>>>>>>>> <thierry.goubier(a)cea.fr >>>>>>>>>>> <mailto:thierry.goubier@cea.fr><mailto:thierry.goubier@cea.fr>> wrote: >>>>>>>>>>> >>>>>>>>>>> Esteban, Sebastian, >>>>>>>>>>> >>>>>>>>>>> In the filetree code, you will find a format without metadata, >>>>>>>>>>> but it's not in use anymore. >>>>>>>>>>> >>>>>>>>>>> If you use gitfiletree, it will write the metadata for >>>>>>>>>>> compatibility reasons with filetree, but it will never read it >>>>>>>>>>> back. >>>>>>>>>>> >>>>>>>>>>> I'm pushing code to make filetree robust to absence of metadata, >>>>>>>>>>> but I haven't worked on it for a while. >>>>>>>>>>> >>>>>>>>>>> gitfiletree has solved the problem of a slow metadata read. It >>>>>>>>>>> does not solve any performance problem associated with >>>>>>>>>>> writing, yet. >>>>>>>>>>> >>>>>>>>>>> Thierry >>>>>>>>>>> >>>>>>>>>>> Le 11/12/2013 16:12, Esteban Lorenzano a Ã©crit : >>>>>>>>>>> >>>>>>>>>>> I know there is a version of filetree without metadata (more >>>>>>>>>>> compelling >>>>>>>>>>> for projects that will never use other formats). >>>>>>>>>>> Dale told me that there was a preview somewhere, but I >>>>>>>>>>> didn't tested yet >>>>>>>>>>> (lack of time) and now I cannot find the mail... >>>>>>>>>>> Dale, can you re-send the link? >>>>>>>>>>> >>>>>>>>>>> cheers, >>>>>>>>>>> Esteban >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Wed, Dec 11, 2013 at 4:08 PM, Sebastian Sastre >>>>>>>>>>> <sebastian(a)flowingconcept.com >>>>>>>>>>> <mailto:sebastian@flowingconcept.com> >>>>>>>>>>> <mailto:sebastian@flowingconcept.com> >>>>>>>>>>> <mailto:sebastian@__flowingconcept.com >>>>>>>>>>> <mailto:sebastian@flowingconcept.com>>> wrote: >>>>>>>>>>> >>>>>>>>>>> I should breath before I type, but you probably already >>>>>>>>>>> got that I >>>>>>>>>>> meant /redundant writes/ (not reads)... >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Anyway.. I was talking with Esteban and he mentions >>>>>>>>>>> some kind of >>>>>>>>>>> compatibility metadata. >>>>>>>>>>> >>>>>>>>>>> If I'm going to give a leap of faith to filetree repos >>>>>>>>>>> to save code >>>>>>>>>>> why should I care about mcz compatibility? Paying a >>>>>>>>>>> toll for no >>>>>>>>>>> reason is evil. >>>>>>>>>>> >>>>>>>>>>> Maybe we could make that optional so those who don't >>>>>>>>>>> extract value >>>>>>>>>>> from that feature can opt-out? >>>>>>>>>>> >>>>>>>>>>> sebastian <https://about.me/__sebastianconcept >>>>>>>>>>> <https://about.me/sebastianconcept>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> o/ >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> On Dec 11, 2013, at 12:44 PM, Sebastian Sastre >>>>>>>>>>> <sebastian(a)flowingconcept.com >>>>>>>>>>> <mailto:sebastian@flowingconcept.com> >>>>>>>>>>> <mailto:sebastian@flowingconcept.com> >>>>>>>>>>> <mailto:sebastian@__flowingconcept.com >>>>>>>>>>> <mailto:sebastian@flowingconcept.com>>> >>>>>>>>>>> wrote: >>>>>>>>>>> >>>>>>>>>>> Hi Thierry >>>>>>>>>>> >>>>>>>>>>> On Dec 11, 2013, at 12:43 PM, Goubier Thierry >>>>>>>>>>> <thierry.goubier(a)cea.fr >>>>>>>>>>> <mailto:thierry.goubier@cea.fr> >>>>>>>>>>> <mailto:thierry.goubier@cea.fr> >>>>>>>>>>> <mailto:thierry.goubier@cea.fr >>>>>>>>>>> <mailto:thierry.goubier@cea.fr>__>> wrote: >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> I have packages (in the order of hundreds >>>>>>>>>>> of classes) and save >>>>>>>>>>> delays >>>>>>>>>>> and package click delays are starting to >>>>>>>>>>> demand patience in a >>>>>>>>>>> way that >>>>>>>>>>> doesn't feel like the right path >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Which operations ? I didn't remember noticing >>>>>>>>>>> much with 179 >>>>>>>>>>> classes on a laptop without a SSD. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> choose one. Just for clicking the package that will >>>>>>>>>>> should you >>>>>>>>>>> UUID, version and author I need to wait ~16 >>>>>>>>>>> seconds. Sounds like a >>>>>>>>>>> lot of overhead for reading a small .json file. >>>>>>>>>>> >>>>>>>>>>> But the write is the most worrisome >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> All that is with a SSD disk, otherwise save >>>>>>>>>>> delays would be >>>>>>>>>>> /way/ beyond >>>>>>>>>>> unacceptable >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> I'd like to know more, and understand the >>>>>>>>>>> reason, for sure. As >>>>>>>>>>> far as I know, filetree will rewrite the whole >>>>>>>>>>> package to disk >>>>>>>>>>> everytime... and maybe optimising that could be >>>>>>>>>>> the solution. >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Well, that explains a lot. Writing all every time >>>>>>>>>>> is the lazy >>>>>>>>>>> thing that's okay for a prototype and temporary >>>>>>>>>>> code in a proof of >>>>>>>>>>> concept but that massive redundant reads certainly >>>>>>>>>>> doesn't sounds >>>>>>>>>>> like pro software. Specially for SSD's which has a >>>>>>>>>>> limited >>>>>>>>>>> quantity of writes >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Thierry >>>>>>>>>>> >>>>>>>>>>> sebastian >>>>>>>>>>> <https://about.me/__sebastianconcept >>>>>>>>>>> <https://about.me/sebastianconcept>> >>>>>>>>>>> >>>>>>>>>>> o/ >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> Thierry Goubier >>>>>>>>>>> CEA list >>>>>>>>>>> Laboratoire des Fondations des SystÃ¨mes Temps >>>>>>>>>>> RÃ©el EmbarquÃ©s >>>>>>>>>>> 91191 Gif sur Yvette Cedex >>>>>>>>>>> France >>>>>>>>>>> Phone/Fax: +33 (0) 1 69 08 32 92 >>>>>>>>>>> <tel:%2B33%20%280%29%201%2069%2008%2032%2092> >>>>>>>>>>> <tel:%2B33%20%280%29%201%2069%__2008%2032%2092> >>>>>>>>>>> / 83 95 >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> Thierry Goubier >>>>>>>>>>> CEA list >>>>>>>>>>> Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s >>>>>>>>>>> 91191 Gif sur Yvette Cedex >>>>>>>>>>> France >>>>>>>>>>> Phone/Fax: +33 (0) 1 69 08 32 92 >>>>>>>>>>> <tel:%2B33%20%280%29%201%2069%2008%2032%2092> / 83 95 >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> Thierry Goubier >>>>>>>>>> CEA list >>>>>>>>>> Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s >>>>>>>>>> 91191 Gif sur Yvette Cedex >>>>>>>>>> France >>>>>>>>>> Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95 >>>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> Thierry Goubier >>>>>>>> CEA list >>>>>>>> Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s >>>>>>>> 91191 Gif sur Yvette Cedex >>>>>>>> France >>>>>>>> Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95

Dec. 13, 2013

Commit right to Pharo30Inbox

by wm＠fastmail.fm

Hi list. I want to submit a SLICE to the pharo inbox, can you grant me commit rights? username: MartinWalk thanks!

Dec. 13, 2013

Re: [Pharo-dev] Tell me about your workflow

by GOUBIER Thierry

Ok. I'll try Roassal on a slow netbook to see. I don't see a factor of 10 difference between yours and Roassal, so I'll have a look. Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] Date d'envoi : vendredi 13 dÃ©cembre 2013 14:32 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow A bit. This is from today's current version (and is not all, it's only the two biggest packages): (MCPackage named: 'flow') workingCopy packageInfo classes size. 363. (MCPackage named: 'flow') workingCopy packageInfo coreMethods size. 4585. (MCPackage named: 'airflowing') workingCopy packageInfo classes size. 377. (MCPackage named: 'airflowing') workingCopy packageInfo coreMethods size. 5818. On Dec 13, 2013, at 11:25 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: Roassal: 3493 Number of versions in the package history: 733. Size of the version file: 202796. Is that a lot lower than your count? Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com>] Date d'envoi : vendredi 13 dÃ©cembre 2013 13:34 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow how many coreMethods? On Dec 13, 2013, at 7:00 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: Bad news. Roassal package directory has 355 entries (343 classes + a few extensions) and I don't see much of a slow down (on 3.0). It's not instantaneous, but with a bit of feedback, it doesn't seems long. I'll do some profiling. Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de GOUBIER Thierry Date d'envoi : jeudi 12 dÃ©cembre 2013 17:07 Ã : Pharo Development List Objet : [PROVENANCE INTERNET] Re: [Pharo-dev] Tell me about your workflow Thanks for the pointers. I'll look at Seaside/Moose/Mondrian and Roassal, because I need code I can load and save in an image without destroying the very image I use to test (which would happen if I load Pharo10 stuff in a 3.0 image ;) ). Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Yuriy Tymchuk [yuriy.tymchuk(a)me.com<mailto:yuriy.tymchuk@me.com>] Date d'envoi : jeudi 12 dÃ©cembre 2013 16:24 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow So if you want something big and with a lot of commits you can use Pharo* in general. Pharo10 has the most versions and Pharo30Inbox is the largest one. If you want some other projects then you heve to take a look at Seaside30, Mondrian, Moose, Glamour or Roassal. Uko On 12 Dec 2013, at 16:20, Yuriy Tymchuk <yuriy.tymchuk(a)me.com<mailto:yuriy.tymchuk@me.com>> wrote: Pharo10 on SmalltalkHub is humongous. You can definitely do a stress test with it :) Uko On 12 Dec 2013, at 15:43, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: I would need a large project, composed of one or more packages, with more than 150~200 classes, which triggers the slow read and writing times Sebastian experience. And, probably, to be complete, a long and complex commit history in git (> 100 commits). I'll keep in mind the idea of creating one randomly ;) Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Yuriy Tymchuk [yuriy.tymchuk(a)me.com<mailto:yuriy.tymchuk@me.com>] Date d'envoi : jeudi 12 dÃ©cembre 2013 15:37 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow Are you interested in a package or a project? I can provide you information based on size, etcâ¦ Uko On 12 Dec 2013, at 15:30, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: I gave up running gitfiletree on 1.4 :( It's possible to use gitfiletree from a 2.0 or a 3.0 image to browse your git repository, but testing the writing will be an issue. My best chance would be to find a large enough package I can use on 2.0 or 3.0 to test and profile. Does anybody has a large enough package which could fit? Anything that doesn't require a NDA to read it, of course. Is Roassal large enough? Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com>] Date d'envoi : jeudi 12 dÃ©cembre 2013 12:12 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow gee the big code package is airflowing which I have, quite conservatively, running on #14438 images I load filetree like this: Gofer new url: 'http://ss3.gemstone.com/ss/FileTree'; package: 'ConfigurationOfFileTree'; load. ((Smalltalk at: #ConfigurationOfFileTree) project version: #'stable') load. and it never complained let me know On Dec 12, 2013, at 3:53 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: If you would be ready to profile a package save on your repository, it would be great. In the mean time, I'll make available a special gitfiletree package to test. Which version of Pharo you are using? 2.0 or 3.0? Regards, Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com>] Date d'envoi : mercredi 11 dÃ©cembre 2013 17:09 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow ok, if saving is dumping all, then 3 is confirmed? After the first commit, I'd say so. about 2, I don't know. I'm available to make tests and measure results have a nice trip, keep us tuned about any progress On Dec 11, 2013, at 2:09 PM, Goubier Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: Yes, you're right in the general case. But a solution to that general problem will take time to be implemented (time I lack at the moment, sadly) and if the main gain is a few % because it's writing the version file and the metadata for methods which are the "slow" factors, then we'll have worked hard for nothing. If you want to help, I'd really like to see either 2- or 3- confirmed. I can produce a special gitfiletree to remove writing the metadata, that you can try on a large project temporary copy; if the slow writing (and reading) is confirmed, then this is 3- (But I'm leaving on a trip tomorrow early, so I have no idea of when I'll have the time to do that :( ). Thierry Le 11/12/2013 16:44, Sebastian Sastre a Ã©crit : Without entering in details, a cause for slow package write is dumping all every time. For that strategy, we already have the image save which is magically fast. So, if we make something to scan the code and write only when it's different from what's on disk, then we would be preventing tons of redundant writes sebastian <https://about.me/sebastianconcept> o/ On Dec 11, 2013, at 1:43 PM, Goubier Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr>> wrote: Le 11/12/2013 16:27, Esteban Lorenzano a Ã©crit : ah, and IMHO the problem is not about reading... is about writing (if it has to write the metadata each time...). But, personnaly, I don't know if this is the reason for the lack of performance... I have three hypothesis for Sebastian problem: 1 - Slow read time for version metadata - Confirmed because of the 16 seconds wait time for reading the package metadata in the repository browser. 2 - Slow metadata write 3 - Slow package write I have an implemented solution for 1-, a very easy to implement for 2-, and none yet for 3- So I'd really like to check if 3- is confirmed ;) Thierry Esteban On Wed, Dec 11, 2013 at 4:24 PM, Esteban Lorenzano <estebanlm(a)gmail.com<mailto:estebanlm@gmail.com> <mailto:estebanlm@gmail.com> <mailto:estebanlm@gmail.com>> wrote: Thierry, I know there is a working version... let me search... (5 mins later) here: https://github.com/rjsargent/CypressReferenceImplementation Dale says Richard made a metadata-less version. We should take a look at that. Esteban On Wed, Dec 11, 2013 at 4:28 PM, Goubier Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr><mailto:thierry.goubier@cea.fr>> wrote: Esteban, Sebastian, In the filetree code, you will find a format without metadata, but it's not in use anymore. If you use gitfiletree, it will write the metadata for compatibility reasons with filetree, but it will never read it back. I'm pushing code to make filetree robust to absence of metadata, but I haven't worked on it for a while. gitfiletree has solved the problem of a slow metadata read. It does not solve any performance problem associated with writing, yet. Thierry Le 11/12/2013 16:12, Esteban Lorenzano a Ã©crit : I know there is a version of filetree without metadata (more compelling for projects that will never use other formats). Dale told me that there was a preview somewhere, but I didn't tested yet (lack of time) and now I cannot find the mail... Dale, can you re-send the link? cheers, Esteban On Wed, Dec 11, 2013 at 4:08 PM, Sebastian Sastre <sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com> <mailto:sebastian@flowingconcept.com> <mailto:sebastian@flowingconcept.com> <mailto:sebastian@__flowingconcept.com <mailto:sebastian@flowingconcept.com>>> wrote: I should breath before I type, but you probably already got that I meant /redundant writes/ (not reads)... Anyway.. I was talking with Esteban and he mentions some kind of compatibility metadata. If I'm going to give a leap of faith to filetree repos to save code why should I care about mcz compatibility? Paying a toll for no reason is evil. Maybe we could make that optional so those who don't extract value from that feature can opt-out? sebastian <https://about.me/__sebastianconcept <https://about.me/sebastianconcept>> o/ On Dec 11, 2013, at 12:44 PM, Sebastian Sastre <sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com> <mailto:sebastian@flowingconcept.com> <mailto:sebastian@flowingconcept.com> <mailto:sebastian@__flowingconcept.com <mailto:sebastian@flowingconcept.com>>> wrote: Hi Thierry On Dec 11, 2013, at 12:43 PM, Goubier Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr <mailto:thierry.goubier@cea.fr>__>> wrote: I have packages (in the order of hundreds of classes) and save delays and package click delays are starting to demand patience in a way that doesn't feel like the right path Which operations ? I didn't remember noticing much with 179 classes on a laptop without a SSD. choose one. Just for clicking the package that will should you UUID, version and author I need to wait ~16 seconds. Sounds like a lot of overhead for reading a small .json file. But the write is the most worrisome All that is with a SSD disk, otherwise save delays would be /way/ beyond unacceptable I'd like to know more, and understand the reason, for sure. As far as I know, filetree will rewrite the whole package to disk everytime... and maybe optimising that could be the solution. Well, that explains a lot. Writing all every time is the lazy thing that's okay for a prototype and temporary code in a proof of concept but that massive redundant reads certainly doesn't sounds like pro software. Specially for SSD's which has a limited quantity of writes Thierry sebastian <https://about.me/__sebastianconcept <https://about.me/sebastianconcept>> o/ -- Thierry Goubier CEA list Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s 91191 Gif sur Yvette Cedex France Phone/Fax: +33 (0) 1 69 08 32 92 <tel:%2B33%20%280%29%201%2069%2008%2032%2092> <tel:%2B33%20%280%29%201%2069%__2008%2032%2092> / 83 95 -- Thierry Goubier CEA list Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s 91191 Gif sur Yvette Cedex France Phone/Fax: +33 (0) 1 69 08 32 92 <tel:%2B33%20%280%29%201%2069%2008%2032%2092> / 83 95 -- Thierry Goubier CEA list Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s 91191 Gif sur Yvette Cedex France Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95 -- Thierry Goubier CEA list Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s 91191 Gif sur Yvette Cedex France Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95

Dec. 13, 2013

Re: [Pharo-dev] Tell me about your workflow

by Sebastian Sastre

A bit. This is from today's current version (and is not all, it's only the two biggest packages): (MCPackage named: 'flow') workingCopy packageInfo classes size. 363. (MCPackage named: 'flow') workingCopy packageInfo coreMethods size. 4585. (MCPackage named: 'airflowing') workingCopy packageInfo classes size. 377. (MCPackage named: 'airflowing') workingCopy packageInfo coreMethods size. 5818. On Dec 13, 2013, at 11:25 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: > Roassal: 3493 > > Number of versions in the package history: 733. Size of the version file: 202796. > > Is that a lot lower than your count? > > Thierry > > De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] > Date d'envoi : vendredi 13 dÃ©cembre 2013 13:34 > Ã : Pharo Development List > Objet : Re: [Pharo-dev] Tell me about your workflow > > how many coreMethods? > > > > > On Dec 13, 2013, at 7:00 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: > >> Bad news. Roassal package directory has 355 entries (343 classes + a few extensions) and I don't see much of a slow down (on 3.0). It's not instantaneous, but with a bit of feedback, it doesn't seems long. >> >> I'll do some profiling. >> >> Thierry >> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de GOUBIER Thierry >> Date d'envoi : jeudi 12 dÃ©cembre 2013 17:07 >> Ã : Pharo Development List >> Objet : [PROVENANCE INTERNET] Re: [Pharo-dev] Tell me about your workflow >> >> Thanks for the pointers. >> >> I'll look at Seaside/Moose/Mondrian and Roassal, because I need code I can load and save in an image without destroying the very image I use to test (which would happen if I load Pharo10 stuff in a 3.0 image ;) ). >> >> Thierry >> >> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Yuriy Tymchuk [yuriy.tymchuk(a)me.com] >> Date d'envoi : jeudi 12 dÃ©cembre 2013 16:24 >> Ã : Pharo Development List >> Objet : Re: [Pharo-dev] Tell me about your workflow >> >> So if you want something big and with a lot of commits you can use Pharo* in general. Pharo10 has the most versions and Pharo30Inbox is the largest one. If you want some other projects then you heve to take a look at Seaside30, Mondrian, Moose, Glamour or Roassal. >> >> Uko >> >> On 12 Dec 2013, at 16:20, Yuriy Tymchuk <yuriy.tymchuk(a)me.com> wrote: >> >>> Pharo10 on SmalltalkHub is humongous. You can definitely do a stress test with it :) >>> >>> Uko >>> >>> On 12 Dec 2013, at 15:43, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>> >>>> I would need a large project, composed of one or more packages, with more than 150~200 classes, which triggers the slow read and writing times Sebastian experience. And, probably, to be complete, a long and complex commit history in git (> 100 commits). >>>> >>>> I'll keep in mind the idea of creating one randomly ;) >>>> >>>> Thierry >>>> >>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Yuriy Tymchuk [yuriy.tymchuk(a)me.com] >>>> Date d'envoi : jeudi 12 dÃ©cembre 2013 15:37 >>>> Ã : Pharo Development List >>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>> >>>> Are you interested in a package or a project? I can provide you information based on size, etcâ¦ >>>> >>>> Uko >>>> >>>> On 12 Dec 2013, at 15:30, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>>> >>>>> I gave up running gitfiletree on 1.4 :( >>>>> >>>>> It's possible to use gitfiletree from a 2.0 or a 3.0 image to browse your git repository, but testing the writing will be an issue. >>>>> >>>>> My best chance would be to find a large enough package I can use on 2.0 or 3.0 to test and profile. Does anybody has a large enough package which could fit? Anything that doesn't require a NDA to read it, of course. Is Roassal large enough? >>>>> >>>>> Thierry >>>>> >>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >>>>> Date d'envoi : jeudi 12 dÃ©cembre 2013 12:12 >>>>> Ã : Pharo Development List >>>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>>> >>>>> gee the big code package is airflowing which I have, quite conservatively, running on #14438 images >>>>> >>>>> I load filetree like this: >>>>> >>>>> Gofer new >>>>> url: 'http://ss3.gemstone.com/ss/FileTree'; >>>>> package: 'ConfigurationOfFileTree'; >>>>> load. >>>>> ((Smalltalk at: #ConfigurationOfFileTree) project version: #'stable') load. >>>>> >>>>> and it never complained >>>>> >>>>> let me know >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> On Dec 12, 2013, at 3:53 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr> wrote: >>>>> >>>>>> If you would be ready to profile a package save on your repository, it would be great. In the mean time, I'll make available a special gitfiletree package to test. Which version of Pharo you are using? 2.0 or 3.0? >>>>>> >>>>>> Regards, >>>>>> >>>>>> Thierry >>>>>> >>>>>> >>>>>> De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] >>>>>> Date d'envoi : mercredi 11 dÃ©cembre 2013 17:09 >>>>>> Ã : Pharo Development List >>>>>> Objet : Re: [Pharo-dev] Tell me about your workflow >>>>>> >>>>>> ok, if saving is dumping all, then 3 is confirmed? After the first commit, I'd say so. >>>>>> >>>>>> about 2, I don't know. I'm available to make tests and measure results >>>>>> >>>>>> have a nice trip, keep us tuned about any progress >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Dec 11, 2013, at 2:09 PM, Goubier Thierry <thierry.goubier(a)cea.fr> wrote: >>>>>> >>>>>>> Yes, you're right in the general case. >>>>>>> >>>>>>> But a solution to that general problem will take time to be implemented (time I lack at the moment, sadly) and if the main gain is a few % because it's writing the version file and the metadata for methods which are the "slow" factors, then we'll have worked hard for nothing. >>>>>>> >>>>>>> If you want to help, I'd really like to see either 2- or 3- confirmed. I can produce a special gitfiletree to remove writing the metadata, that you can try on a large project temporary copy; if the slow writing (and reading) is confirmed, then this is 3- >>>>>>> >>>>>>> (But I'm leaving on a trip tomorrow early, so I have no idea of when I'll have the time to do that :( ). >>>>>>> >>>>>>> Thierry >>>>>>> >>>>>>> Le 11/12/2013 16:44, Sebastian Sastre a Ã©crit : >>>>>>>> Without entering in details, a cause for slow package write is dumping >>>>>>>> all every time. >>>>>>>> >>>>>>>> For that strategy, we already have the image save which is magically fast. >>>>>>>> >>>>>>>> So, if we make something to scan the code and write only when it's >>>>>>>> different from what's on disk, then we would be preventing tons of >>>>>>>> redundant writes >>>>>>>> >>>>>>>> sebastian <https://about.me/sebastianconcept> >>>>>>>> >>>>>>>> o/ >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Dec 11, 2013, at 1:43 PM, Goubier Thierry <thierry.goubier(a)cea.fr >>>>>>>> <mailto:thierry.goubier@cea.fr>> wrote: >>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Le 11/12/2013 16:27, Esteban Lorenzano a Ã©crit : >>>>>>>>>> ah, and IMHO the problem is not about reading... is about writing (if it >>>>>>>>>> has to write the metadata each time...). >>>>>>>>> >>>>>>>>> But, personnaly, I don't know if this is the reason for the lack of >>>>>>>>> performance... >>>>>>>>> >>>>>>>>> I have three hypothesis for Sebastian problem: >>>>>>>>> 1 - Slow read time for version metadata >>>>>>>>> - Confirmed because of the 16 seconds wait time for reading the >>>>>>>>> package metadata in the repository browser. >>>>>>>>> 2 - Slow metadata write >>>>>>>>> 3 - Slow package write >>>>>>>>> >>>>>>>>> I have an implemented solution for 1-, a very easy to implement for >>>>>>>>> 2-, and none yet for 3- >>>>>>>>> >>>>>>>>> So I'd really like to check if 3- is confirmed ;) >>>>>>>>> >>>>>>>>> Thierry >>>>>>>>> >>>>>>>>>> >>>>>>>>>> Esteban >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Wed, Dec 11, 2013 at 4:24 PM, Esteban Lorenzano >>>>>>>>>> <estebanlm(a)gmail.com <mailto:estebanlm@gmail.com> >>>>>>>>>> <mailto:estebanlm@gmail.com>> wrote: >>>>>>>>>> >>>>>>>>>> Thierry, I know there is a working version... let me search... >>>>>>>>>> >>>>>>>>>> (5 mins later) >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> here: >>>>>>>>>> >>>>>>>>>> https://github.com/rjsargent/CypressReferenceImplementation >>>>>>>>>> >>>>>>>>>> Dale says Richard made a metadata-less version. >>>>>>>>>> >>>>>>>>>> We should take a look at that. >>>>>>>>>> >>>>>>>>>> Esteban >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Wed, Dec 11, 2013 at 4:28 PM, Goubier Thierry >>>>>>>>>> <thierry.goubier(a)cea.fr >>>>>>>>>> <mailto:thierry.goubier@cea.fr><mailto:thierry.goubier@cea.fr>> wrote: >>>>>>>>>> >>>>>>>>>> Esteban, Sebastian, >>>>>>>>>> >>>>>>>>>> In the filetree code, you will find a format without metadata, >>>>>>>>>> but it's not in use anymore. >>>>>>>>>> >>>>>>>>>> If you use gitfiletree, it will write the metadata for >>>>>>>>>> compatibility reasons with filetree, but it will never read it >>>>>>>>>> back. >>>>>>>>>> >>>>>>>>>> I'm pushing code to make filetree robust to absence of metadata, >>>>>>>>>> but I haven't worked on it for a while. >>>>>>>>>> >>>>>>>>>> gitfiletree has solved the problem of a slow metadata read. It >>>>>>>>>> does not solve any performance problem associated with >>>>>>>>>> writing, yet. >>>>>>>>>> >>>>>>>>>> Thierry >>>>>>>>>> >>>>>>>>>> Le 11/12/2013 16:12, Esteban Lorenzano a Ã©crit : >>>>>>>>>> >>>>>>>>>> I know there is a version of filetree without metadata (more >>>>>>>>>> compelling >>>>>>>>>> for projects that will never use other formats). >>>>>>>>>> Dale told me that there was a preview somewhere, but I >>>>>>>>>> didn't tested yet >>>>>>>>>> (lack of time) and now I cannot find the mail... >>>>>>>>>> Dale, can you re-send the link? >>>>>>>>>> >>>>>>>>>> cheers, >>>>>>>>>> Esteban >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Wed, Dec 11, 2013 at 4:08 PM, Sebastian Sastre >>>>>>>>>> <sebastian(a)flowingconcept.com >>>>>>>>>> <mailto:sebastian@flowingconcept.com> >>>>>>>>>> <mailto:sebastian@flowingconcept.com> >>>>>>>>>> <mailto:sebastian@__flowingconcept.com >>>>>>>>>> <mailto:sebastian@flowingconcept.com>>> wrote: >>>>>>>>>> >>>>>>>>>> I should breath before I type, but you probably already >>>>>>>>>> got that I >>>>>>>>>> meant /redundant writes/ (not reads)... >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Anyway.. I was talking with Esteban and he mentions >>>>>>>>>> some kind of >>>>>>>>>> compatibility metadata. >>>>>>>>>> >>>>>>>>>> If I'm going to give a leap of faith to filetree repos >>>>>>>>>> to save code >>>>>>>>>> why should I care about mcz compatibility? Paying a >>>>>>>>>> toll for no >>>>>>>>>> reason is evil. >>>>>>>>>> >>>>>>>>>> Maybe we could make that optional so those who don't >>>>>>>>>> extract value >>>>>>>>>> from that feature can opt-out? >>>>>>>>>> >>>>>>>>>> sebastian <https://about.me/__sebastianconcept >>>>>>>>>> <https://about.me/sebastianconcept>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> o/ >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> On Dec 11, 2013, at 12:44 PM, Sebastian Sastre >>>>>>>>>> <sebastian(a)flowingconcept.com >>>>>>>>>> <mailto:sebastian@flowingconcept.com> >>>>>>>>>> <mailto:sebastian@flowingconcept.com> >>>>>>>>>> <mailto:sebastian@__flowingconcept.com >>>>>>>>>> <mailto:sebastian@flowingconcept.com>>> >>>>>>>>>> wrote: >>>>>>>>>> >>>>>>>>>> Hi Thierry >>>>>>>>>> >>>>>>>>>> On Dec 11, 2013, at 12:43 PM, Goubier Thierry >>>>>>>>>> <thierry.goubier(a)cea.fr >>>>>>>>>> <mailto:thierry.goubier@cea.fr> >>>>>>>>>> <mailto:thierry.goubier@cea.fr> >>>>>>>>>> <mailto:thierry.goubier@cea.fr >>>>>>>>>> <mailto:thierry.goubier@cea.fr>__>> wrote: >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> I have packages (in the order of hundreds >>>>>>>>>> of classes) and save >>>>>>>>>> delays >>>>>>>>>> and package click delays are starting to >>>>>>>>>> demand patience in a >>>>>>>>>> way that >>>>>>>>>> doesn't feel like the right path >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Which operations ? I didn't remember noticing >>>>>>>>>> much with 179 >>>>>>>>>> classes on a laptop without a SSD. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> choose one. Just for clicking the package that will >>>>>>>>>> should you >>>>>>>>>> UUID, version and author I need to wait ~16 >>>>>>>>>> seconds. Sounds like a >>>>>>>>>> lot of overhead for reading a small .json file. >>>>>>>>>> >>>>>>>>>> But the write is the most worrisome >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> All that is with a SSD disk, otherwise save >>>>>>>>>> delays would be >>>>>>>>>> /way/ beyond >>>>>>>>>> unacceptable >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> I'd like to know more, and understand the >>>>>>>>>> reason, for sure. As >>>>>>>>>> far as I know, filetree will rewrite the whole >>>>>>>>>> package to disk >>>>>>>>>> everytime... and maybe optimising that could be >>>>>>>>>> the solution. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Well, that explains a lot. Writing all every time >>>>>>>>>> is the lazy >>>>>>>>>> thing that's okay for a prototype and temporary >>>>>>>>>> code in a proof of >>>>>>>>>> concept but that massive redundant reads certainly >>>>>>>>>> doesn't sounds >>>>>>>>>> like pro software. Specially for SSD's which has a >>>>>>>>>> limited >>>>>>>>>> quantity of writes >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Thierry >>>>>>>>>> >>>>>>>>>> sebastian >>>>>>>>>> <https://about.me/__sebastianconcept >>>>>>>>>> <https://about.me/sebastianconcept>> >>>>>>>>>> >>>>>>>>>> o/ >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> Thierry Goubier >>>>>>>>>> CEA list >>>>>>>>>> Laboratoire des Fondations des SystÃ¨mes Temps >>>>>>>>>> RÃ©el EmbarquÃ©s >>>>>>>>>> 91191 Gif sur Yvette Cedex >>>>>>>>>> France >>>>>>>>>> Phone/Fax: +33 (0) 1 69 08 32 92 >>>>>>>>>> <tel:%2B33%20%280%29%201%2069%2008%2032%2092> >>>>>>>>>> <tel:%2B33%20%280%29%201%2069%__2008%2032%2092> >>>>>>>>>> / 83 95 >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> Thierry Goubier >>>>>>>>>> CEA list >>>>>>>>>> Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s >>>>>>>>>> 91191 Gif sur Yvette Cedex >>>>>>>>>> France >>>>>>>>>> Phone/Fax: +33 (0) 1 69 08 32 92 >>>>>>>>>> <tel:%2B33%20%280%29%201%2069%2008%2032%2092> / 83 95 >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Thierry Goubier >>>>>>>>> CEA list >>>>>>>>> Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s >>>>>>>>> 91191 Gif sur Yvette Cedex >>>>>>>>> France >>>>>>>>> Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95 >>>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Thierry Goubier >>>>>>> CEA list >>>>>>> Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s >>>>>>> 91191 Gif sur Yvette Cedex >>>>>>> France >>>>>>> Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95

Dec. 13, 2013

Re: [Pharo-dev] Tell me about your workflow

by GOUBIER Thierry

Roassal: 3493 Number of versions in the package history: 733. Size of the version file: 202796. Is that a lot lower than your count? Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com] Date d'envoi : vendredi 13 dÃ©cembre 2013 13:34 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow how many coreMethods? On Dec 13, 2013, at 7:00 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: Bad news. Roassal package directory has 355 entries (343 classes + a few extensions) and I don't see much of a slow down (on 3.0). It's not instantaneous, but with a bit of feedback, it doesn't seems long. I'll do some profiling. Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de GOUBIER Thierry Date d'envoi : jeudi 12 dÃ©cembre 2013 17:07 Ã : Pharo Development List Objet : [PROVENANCE INTERNET] Re: [Pharo-dev] Tell me about your workflow Thanks for the pointers. I'll look at Seaside/Moose/Mondrian and Roassal, because I need code I can load and save in an image without destroying the very image I use to test (which would happen if I load Pharo10 stuff in a 3.0 image ;) ). Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Yuriy Tymchuk [yuriy.tymchuk(a)me.com<mailto:yuriy.tymchuk@me.com>] Date d'envoi : jeudi 12 dÃ©cembre 2013 16:24 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow So if you want something big and with a lot of commits you can use Pharo* in general. Pharo10 has the most versions and Pharo30Inbox is the largest one. If you want some other projects then you heve to take a look at Seaside30, Mondrian, Moose, Glamour or Roassal. Uko On 12 Dec 2013, at 16:20, Yuriy Tymchuk <yuriy.tymchuk(a)me.com<mailto:yuriy.tymchuk@me.com>> wrote: Pharo10 on SmalltalkHub is humongous. You can definitely do a stress test with it :) Uko On 12 Dec 2013, at 15:43, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: I would need a large project, composed of one or more packages, with more than 150~200 classes, which triggers the slow read and writing times Sebastian experience. And, probably, to be complete, a long and complex commit history in git (> 100 commits). I'll keep in mind the idea of creating one randomly ;) Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Yuriy Tymchuk [yuriy.tymchuk(a)me.com<mailto:yuriy.tymchuk@me.com>] Date d'envoi : jeudi 12 dÃ©cembre 2013 15:37 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow Are you interested in a package or a project? I can provide you information based on size, etcâ¦ Uko On 12 Dec 2013, at 15:30, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: I gave up running gitfiletree on 1.4 :( It's possible to use gitfiletree from a 2.0 or a 3.0 image to browse your git repository, but testing the writing will be an issue. My best chance would be to find a large enough package I can use on 2.0 or 3.0 to test and profile. Does anybody has a large enough package which could fit? Anything that doesn't require a NDA to read it, of course. Is Roassal large enough? Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com>] Date d'envoi : jeudi 12 dÃ©cembre 2013 12:12 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow gee the big code package is airflowing which I have, quite conservatively, running on #14438 images I load filetree like this: Gofer new url: 'http://ss3.gemstone.com/ss/FileTree'; package: 'ConfigurationOfFileTree'; load. ((Smalltalk at: #ConfigurationOfFileTree) project version: #'stable') load. and it never complained let me know On Dec 12, 2013, at 3:53 AM, GOUBIER Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: If you would be ready to profile a package save on your repository, it would be great. In the mean time, I'll make available a special gitfiletree package to test. Which version of Pharo you are using? 2.0 or 3.0? Regards, Thierry ________________________________ De : Pharo-dev [pharo-dev-bounces(a)lists.pharo.org<mailto:pharo-dev-bounces@lists.pharo.org>] de la part de Sebastian Sastre [sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com>] Date d'envoi : mercredi 11 dÃ©cembre 2013 17:09 Ã : Pharo Development List Objet : Re: [Pharo-dev] Tell me about your workflow ok, if saving is dumping all, then 3 is confirmed? After the first commit, I'd say so. about 2, I don't know. I'm available to make tests and measure results have a nice trip, keep us tuned about any progress On Dec 11, 2013, at 2:09 PM, Goubier Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr>> wrote: Yes, you're right in the general case. But a solution to that general problem will take time to be implemented (time I lack at the moment, sadly) and if the main gain is a few % because it's writing the version file and the metadata for methods which are the "slow" factors, then we'll have worked hard for nothing. If you want to help, I'd really like to see either 2- or 3- confirmed. I can produce a special gitfiletree to remove writing the metadata, that you can try on a large project temporary copy; if the slow writing (and reading) is confirmed, then this is 3- (But I'm leaving on a trip tomorrow early, so I have no idea of when I'll have the time to do that :( ). Thierry Le 11/12/2013 16:44, Sebastian Sastre a Ã©crit : Without entering in details, a cause for slow package write is dumping all every time. For that strategy, we already have the image save which is magically fast. So, if we make something to scan the code and write only when it's different from what's on disk, then we would be preventing tons of redundant writes sebastian <https://about.me/sebastianconcept> o/ On Dec 11, 2013, at 1:43 PM, Goubier Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr>> wrote: Le 11/12/2013 16:27, Esteban Lorenzano a Ã©crit : ah, and IMHO the problem is not about reading... is about writing (if it has to write the metadata each time...). But, personnaly, I don't know if this is the reason for the lack of performance... I have three hypothesis for Sebastian problem: 1 - Slow read time for version metadata - Confirmed because of the 16 seconds wait time for reading the package metadata in the repository browser. 2 - Slow metadata write 3 - Slow package write I have an implemented solution for 1-, a very easy to implement for 2-, and none yet for 3- So I'd really like to check if 3- is confirmed ;) Thierry Esteban On Wed, Dec 11, 2013 at 4:24 PM, Esteban Lorenzano <estebanlm(a)gmail.com<mailto:estebanlm@gmail.com> <mailto:estebanlm@gmail.com> <mailto:estebanlm@gmail.com>> wrote: Thierry, I know there is a working version... let me search... (5 mins later) here: https://github.com/rjsargent/CypressReferenceImplementation Dale says Richard made a metadata-less version. We should take a look at that. Esteban On Wed, Dec 11, 2013 at 4:28 PM, Goubier Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr><mailto:thierry.goubier@cea.fr>> wrote: Esteban, Sebastian, In the filetree code, you will find a format without metadata, but it's not in use anymore. If you use gitfiletree, it will write the metadata for compatibility reasons with filetree, but it will never read it back. I'm pushing code to make filetree robust to absence of metadata, but I haven't worked on it for a while. gitfiletree has solved the problem of a slow metadata read. It does not solve any performance problem associated with writing, yet. Thierry Le 11/12/2013 16:12, Esteban Lorenzano a Ã©crit : I know there is a version of filetree without metadata (more compelling for projects that will never use other formats). Dale told me that there was a preview somewhere, but I didn't tested yet (lack of time) and now I cannot find the mail... Dale, can you re-send the link? cheers, Esteban On Wed, Dec 11, 2013 at 4:08 PM, Sebastian Sastre <sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com> <mailto:sebastian@flowingconcept.com> <mailto:sebastian@flowingconcept.com> <mailto:sebastian@__flowingconcept.com <mailto:sebastian@flowingconcept.com>>> wrote: I should breath before I type, but you probably already got that I meant /redundant writes/ (not reads)... Anyway.. I was talking with Esteban and he mentions some kind of compatibility metadata. If I'm going to give a leap of faith to filetree repos to save code why should I care about mcz compatibility? Paying a toll for no reason is evil. Maybe we could make that optional so those who don't extract value from that feature can opt-out? sebastian <https://about.me/__sebastianconcept <https://about.me/sebastianconcept>> o/ On Dec 11, 2013, at 12:44 PM, Sebastian Sastre <sebastian(a)flowingconcept.com<mailto:sebastian@flowingconcept.com> <mailto:sebastian@flowingconcept.com> <mailto:sebastian@flowingconcept.com> <mailto:sebastian@__flowingconcept.com <mailto:sebastian@flowingconcept.com>>> wrote: Hi Thierry On Dec 11, 2013, at 12:43 PM, Goubier Thierry <thierry.goubier(a)cea.fr<mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr> <mailto:thierry.goubier@cea.fr <mailto:thierry.goubier@cea.fr>__>> wrote: I have packages (in the order of hundreds of classes) and save delays and package click delays are starting to demand patience in a way that doesn't feel like the right path Which operations ? I didn't remember noticing much with 179 classes on a laptop without a SSD. choose one. Just for clicking the package that will should you UUID, version and author I need to wait ~16 seconds. Sounds like a lot of overhead for reading a small .json file. But the write is the most worrisome All that is with a SSD disk, otherwise save delays would be /way/ beyond unacceptable I'd like to know more, and understand the reason, for sure. As far as I know, filetree will rewrite the whole package to disk everytime... and maybe optimising that could be the solution. Well, that explains a lot. Writing all every time is the lazy thing that's okay for a prototype and temporary code in a proof of concept but that massive redundant reads certainly doesn't sounds like pro software. Specially for SSD's which has a limited quantity of writes Thierry sebastian <https://about.me/__sebastianconcept <https://about.me/sebastianconcept>> o/ -- Thierry Goubier CEA list Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s 91191 Gif sur Yvette Cedex France Phone/Fax: +33 (0) 1 69 08 32 92 <tel:%2B33%20%280%29%201%2069%2008%2032%2092> <tel:%2B33%20%280%29%201%2069%__2008%2032%2092> / 83 95 -- Thierry Goubier CEA list Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s 91191 Gif sur Yvette Cedex France Phone/Fax: +33 (0) 1 69 08 32 92 <tel:%2B33%20%280%29%201%2069%2008%2032%2092> / 83 95 -- Thierry Goubier CEA list Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s 91191 Gif sur Yvette Cedex France Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95 -- Thierry Goubier CEA list Laboratoire des Fondations des SystÃ¨mes Temps RÃ©el EmbarquÃ©s 91191 Gif sur Yvette Cedex France Phone/Fax: +33 (0) 1 69 08 32 92 / 83 95

Dec. 13, 2013

Pharo 3 is moved to BETA :)

by Esteban Lorenzano

Hi, I forget to announce it to the list, but since last week code integrations are frozen. There just versioner integration, and that is independent of the rest (and it will be integrated soon, probably today). So, from now and until release, we will just accept bugfixes :) cheers, Esteban

Dec. 13, 2013

Re: [Pharo-dev] Is variable shadowing a feature or a bug?

by StÃ©phane Ducasse

> > Ok, I will do it with the Preference > > But in the long run, one can get rid of these thingsâ¦ e,g, > > Step one: code critic rule to detect these cases > two: deprecate the code > three: remove. Great plan!!

Dec. 13, 2013